RIGGING AND TUNING GUIDE - Neil Pryde

ePAPER READ

DOWNLOAD ePAPER

ee.neilpryde.com

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

START NOW

REMOVING A CAMBER

1. Choose the cam you want to remove

and pull the corresponding batten

out from the pocket by about 15cm.

2. Open the cam zipper.

11

Español Français Deutsch English

UNIVERSAL ADJUSTABLE OUTHAUL KIT - Neil Pryde

English Deutsch Français Español 7. Rolling up the sail a. When rolling the sail be sure to flatten out the mast sleeve to have the fold on the seam on the leading edge. Also while rolling up the sail make sure the luff sleeve stays flat. 10 b. After rolling up the sail apply the elastic around the toggle to make sure the sail stays rolled up tightly.

REMOVING A CAMBER 1. Choose the cam you want to remove and pull the corresponding batten out from the pocket by about 15cm. 2. Open the cam zipper. 11 Español Français Deutsch English

Page 1 and 2: RIGGING AND TUNING GUIDE
Page 3 and 4: CONTeNTS eNGLISH DeUTSCH frANCAiS S
Page 5 and 6: d. Next, walk to the top and check
Page 7 and 8: c. For each cam put one hand on the
Page 9: 5. Release down-haul Before releasi
Page 13 and 14: www.neilpryDe.com

RIGGING AND TUNING GUIDE - Neil Pryde

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?