You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
English Deutsch Français Español<br />
3. Putting the cams onto the mast<br />
a. Put the boom on first. Set the boom to<br />
the recommended setting printed on<br />
the bottom of the sail. Next, clamp the<br />
boom on the mast and apply a little bit<br />
of out-haul tension. (approx 5cm)<br />
06<br />
b. If there are zippers on the luff sleeve<br />
make sure they are open before applying<br />
the cams.
Change language