ThermoIn - ThermoShield

Technical Data Sheet
kg/m 2 h 0.5
Bulk density: 440 kg/m3 ± 5%
Storage: Store in a dry place, protect from moisture. Under these conditions,
the storage durability is 12 months from the date of manufacturing
as identified on the pack.
Packaging: The plaster mixtures are supplied in 7 kg paper bags with PE lining.
Each pallet comes with 72 (84) bags and is covered with PE sheet.
Important
instructions:
Safety
instructions:
Safety and
hygiene
standards:
Do not work at too high or too low air and wall temperatures (below
+5°C), in direct sunlight and in strong wind. Do not mix with other
products.
The product is not classified as a hazardous chemical pursuant to
Act no. 157/1998 Coll., as amended by Act no. 352/1999 Coll. The
product may irritate skin, eyes, and mucous membranes. Use
personal protective equipment (work clothes, footwear, gloves,
goggles) when working. If eyes are affected, rinse them wide-open
with water; wash skin with running water. In the case of medical
complaints, seek professional medical assistance.
Warning code: Xi irritating
R 37/38: Irritating to respiratory system and skin
R 41: Risk of serious damage to eyes
R 43: May cause sensitisation by skin contact
S 2: Keep out of reach of children
S 22: Do not breathe dust
S 24: Avoid contact with the skin
S 25: Avoid contact with eyes
S 26: In case of contact with eyes, rinse immediately with
plenty of water and seek medical advice
S 36/37/39: Wear suitable protective clothing, gloves and eye/face
protection
S 46: If swallowed, seek medical advice immediately and show
the container or label
Quality control: We perform continuous quality control on all our products based on
an approved PCS and implement a certified quality management
system under ČSN EN ISO 9001:2009
Manufacturer: SATSYS Technology a.s., Horní náměstí 14/17, 779 00 Olomouc,
ČR
Version: 07.2011
SATSYS Technology a.s. incorporated with the Commercial Registry maintained by
Ostrava Regional Court, Section B, File 3353