BinderyCatalogueLR.p.. - Birk & Blyme
BinderyCatalogueLR.p.. - Birk & Blyme
BinderyCatalogueLR.p.. - Birk & Blyme
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
76 STITCHING<br />
Hohner Stitcher Heads<br />
M45/6<br />
“The Eliminator”<br />
With this stitching head<br />
all users of Muller<br />
Martini, Osako and<br />
Purlux* can also enjoy<br />
Hohner quality and<br />
reliability.<br />
● Specially developed for Muller Martini, Osako and<br />
Purlux* saddle binders<br />
● One for three: Replaces the 3 original Muller<br />
Martini* heads HK75, 55 and 45<br />
● Toolless wire length and cutting box adjustment for<br />
different stitching thicknesses in seconds<br />
● Accomodates stitching thicknesses from 2 sheets<br />
to 6 mm<br />
● Suitable for multiple applications due to its narrow<br />
design and 45 mm minimum between stitch distance<br />
centres<br />
● Typical Hohner: the left centering device provides<br />
the narrowest possible distance between stitch<br />
centres<br />
Parameter M45/6<br />
Max. stitching thickness 6 mm<br />
Distance between staples (standard) 45-54 mm<br />
Crown width 12 mm<br />
Round wire<br />
No. 24-26 (0.60-0.50 mm) x<br />
or No. 26-28 (0.60-0.40 mm) x<br />
or No. 23 (0.70 mm) x<br />
Optional stitching head<br />
(Replaces M50/8 Head)<br />
for crown width 14 mm x<br />
Min. distance between staples 47-56 mm<br />
M55/L<br />
“The Eliminator - Loop”<br />
The M55/L is the perfect<br />
solution for the installation<br />
of loop stitching<br />
heads on the Muller<br />
Martini, Osako and<br />
Purlux stitchers.<br />
● The ideal narrow stitching head for loop stitching on<br />
Muller Martini, Osako and Purlux* stitchers<br />
● Toolless wire length and cutting box adjustment for<br />
different thicknesses in seconds<br />
● Typical Hohner: centering device roll for the perfect<br />
loop<br />
● Loop stitching in 6 mm or - uniquely - 8 mm, even<br />
down to single sheet products<br />
Parameter M55/L<br />
Loop stitching<br />
Inner diameter of loop 6 mm x<br />
--> max. stitching thickness 4 mm*<br />
Inner diameter of loop 8 mm<br />
--> max. stitching thickness 3 mm<br />
Min. distance between staples 55-60 mm<br />
with centering device 70-73 mm<br />
with centering roll 71-74 mm<br />
Stitching wire No. 24-26 (0.6-0.5 mm) x<br />
Optional exchange parts<br />
Lefthand centering device x<br />
Min. distance between staples 60 mm<br />
*depending on machine type<br />
*Brand names and trademarks published herein are registered trademarks of their respective companies. <strong>Birk</strong> & <strong>Blyme</strong> is not an authorized dealer for<br />
Muller Martini, Osako and Purlux products and do not offer genuine parts. <strong>Birk</strong> & <strong>Blyme</strong> supplies compatible high quality replacement parts.<br />
Building 5, 49 Frenchs Forest Road, Frenchs Forest NSW 2086 Australia<br />
Tel: 61 2 9452 0222 • Fax: 61 2 9972 7901<br />
Email: info@birk-blyme.com • www.birk-blyme.com