BinderyCatalogueLR.p.. - Birk & Blyme

Deluxe Stitcher Heads
Muller Martini* Style Heads
DB75
DB75V
DB75 Loop
DB45
DB75VS
REPLACEMENT PARTS
Complete range of Stitcher
Head Replacement parts
available for all of the above
type model heads.
STITCHING 87
*Brand names and trademarks published herein are registered trademarks of their respective companies.
Birk & Blyme is not an authorized dealer for Muller Martini products and do not offer genuine parts. Birk & Blyme supplies compatible high quality replacement parts.
Building 5, 49 Frenchs Forest Road, Frenchs Forest NSW 2086 Australia
Tel: 61 2 9452 0222 • Fax: 61 2 9972 7901
Email: info@birk-blyme.com • www.birk-blyme.com
DB45
Capacity - Two sheets to 1/8” (3 mm)
Wire Size Available - 25-28 Gauge Round
Crown Sizes Available - 7/16” (10 mm)
Minimum Head Centers - 1-3/4” (45 mm)
for all material thicknesses
DB75
Capacity - Two sheets to 13/64” (5 mm)
Wire Size Available - 20-28 Gauge Round
Crown Sizes Available - 1/2” (14 mm)
Minimum Head Centers - 3” (75 mm)
for all material thicknesses
DB75V
Capacity - Two sheets to 1/4” (6 mm)
Wire Size Available - 20-28 Gauge Round
21 x 25 and 20 x 24 Flat
Crown Sizes Available - 1/2” (14 mm)
Minimum Head Centers - 3” (75 mm)
for all material thicknesses
DB75VS
Capacity - Two sheets to 1/4” (6 mm)
Wire Size Available - 20-28 Gauge Round
21 x 25 and 20 x 24 Flat
Crown Sizes Available - 1/2” (14 mm)
Minimum Head Centers - 3” (75 mm)
for all material thicknesses
DB75 LOOP
Capacity - Two sheets to 1/8” (3 mm)
Wire Size Available - 24-25 or 25-26 Gauge Round
5 mm Loop
Minimum Head Centers - 3” (75 mm)
for all material thicknesses