Promains Pty Ltd - Water Services Association of Australia

More documents

Recommendations

Info

WSAA Product Appraisal 11/29 Part 3 38 Photo 1 Storage of GRP CC- jacking Pipes Photo 2 Couplings Photo 3 Timber and Scallop supports and strappings Photo 5 Installation COPYRIGHT Photo 4 Labelling on Pipes Replace with label above.
WSAA Product Appraisal 11/29 Part 3 39 APPENDIX F - NATA LABORATORY TEST RESULTS Test Reports have been made available for the purposes of preparing this product appraisal report. The information is considered to be commercial in confidence and has not therefore been made public. Should you require such information, please contact the manufacturer (Appendix E). The type testing and ongoing production testing (batch testing) confirm the GRP centrifugal cast jacking pipe meets the requirements of ISO 25780:2011. This is verified by the Bureau Veritas Inspections Certificate and TUV SUD Confirmation Certificates. SUPERLIT have provided testing results which have been conducted at the SUPERLİT Test Laboratory Certification (TURKAK accredited) and from TUV SUD TURKIYE copies of test reports are available upon request from the WSAA Product Appraisal Manager. Batch release testing is done in-house on appropriate specialist testing equipment. ISO 25780: 2011 calls up a range of performance tests which include the following: COPYRIGHT
Page 1 and 2: WSAA Product Appraisal 11/29 Part 3
Page 37: WSAA Product Appraisal 11/29 Part 3
Page 45: WSAA Product Appraisal 11/29 Part 3

Promains Pty Ltd - Water Services Association of Australia

Create successful ePaper yourself

Delete template?

Save as template?