INNOVATIVE SOLID BOWL CENTRIFUGE TECHNOLOGY

More documents

Recommendations

Info

18 Lubrication FLOTTWEG <strong>CENTRIFUGE</strong>S can be provided with different lubrication systems. The lubrication system depends on the type of operation, for example, batch or continuous operation and the degree of automation of the entire system. Central lubrication system All main lubrication points are permanently manifolded via tubing or hoses to a central pump. The lubricant is dis- Central lubrication system (manually operated) be automatically activated. This ensures the uniform and reliable lubrication of the centrifuge. It prevents bearings from being under- or over-lubricated and rules out short-term spikes in bearing temperatures and excessive grease consumption. The grease pump is automatically controlled. For many applications, an airoperated oil droplet lubrication system is supplied. pensed proportionally through a special piston distributor. The scroll bearings are permanently sealed and lubricated, but can also be re-greased manually. Automatic grease lubrication Automatic oil droplet lubrication system The fully automatic oil-air lubrication system ensures optimal lubrication with oil droplets transported via air to the bearings. Optimum lubrication is achieved at high speeds, with low oil consumption and no loss in performance. Monitoring of the oil and air pressure guarantees high operational safety. Pneumatic designs are Automatic grease lubrication In contrast to the manual central lubrication system, the greasing system can Oil droplet lubrication system available for utilization in explosion-proof areas. They are suited for Zone 1 up to temperature class T4 according to ATEX 95. This system does not require oil recirculation or treatment.
Wear protection FLOTTWEG offers a wide range of wear protection to meet the requirements of the many different applications in which centrifuges are installed: Illustration of replaceable wear protection elements [1] Welded hard facing or spray coating [2] Ceramic [3] Tungsten carbide tiles, brazed or bolted [4] Chill castings [5] Plastic liners In order to minimize maintenance costs for applications involving highly abrasive products, all wear protection elements, except welded hard facings or spray coatings, are field-replaceable. 19
Page 1 and 2: INNOVATIVE SOLID BOWL CENTRIFUGE TE
Page 3 and 4: Applications The following basic pr
Page 5 and 6: Solid bowl centrifuges The basic pr
Page 7 and 8: Solids discharge Settled solids are
Page 9 and 10: FLOTTWEG SORTICANTER ® The innovat
Page 11 and 12: Centrifuge cleaning Centrifuges mus
Page 13 and 14: Gear drive with frequency inverter
Page 15 and 16: point. In the majority of situation
Page 17: Purging with inert gas Processing o
Page 21 and 22: Customer service Customer service i
Page 23 and 24: TRICANTER ® SORTICANTER ® SEDICAN

INNOVATIVE SOLID BOWL CENTRIFUGE TECHNOLOGY

Create successful ePaper yourself

Delete template?

Save as template?