RP10 Brochure - Zahoransky

Brush Production
GB

RP10
Highest Output With
Minimum Outlay
The ZAHORANKSY GROUP’s product spectrum is complemented
in the area of finishing machines with the ZAHO-
RANSKY RP10 “made by GIORI”.
A high standard of technology combined with service from
the German market leader results in an unbeatable priceperformance
ratio.
n Functional Principle
The brushes are manually inserted in the clampings. They
are rotated past the processing stations by a turntable with
6 clampings and are ejected forwards after completion.
The RP10 is fitted with a total of 6 units:
- 2 Flagging units each with 72 blades
- 1 Cleaning-out station for cleaning the flagged brushes
- 1 Serrated cutter for the pre-trim
- 1 Trimming unit for the final trim
- 1 Tapping unit to enhance the filament volume
- With filament retaining bracket for compressing the filaments
together during the flagging
The machine achieves a high output of up to 800 brushes
per hour and is ergonomically operated and fitted with universal
clampings for many of the current brush models.
Clamping and flagging Trimming Cleaning-out
www.zahoransky-group.com
ZAHORANSKY AG
Anton-Zahoransky-Straße 1
79674 Todtnau-Geschwend
Germany
Phone +49 7671 997-0
info@zahoransky-group.com
ejection
7.
1.
insertion
n Specifications
beating
6.
1x clockwise
Beating
2.
flagging
1x counterclockwise
trimming
5.
3.
cleaning out
4.
Clipper blade
Overview of workstations
With Without
flagging flagging
Filament length, minimum 50mm 20mm
Filament length, maximum 155mm 155mm
Trimming Dimensions
Trimming length, maximum 400mm 400mm
Trimming length, minimum 120mm 95mm
Handle Dimensions
Handle length, maximum 330mm 330mm
Handle length, minimum 50mm 50mm
Handle width, maximum 65mm 80mm
Handle width, minimum 25mm 25mm
All data is sample dependent and can differ slightly.
E. & O. E./02.2012