REVEL ULTIMA GEM loudspeakers
REVEL ULTIMA GEM loudspeakers
REVEL ULTIMA GEM loudspeakers
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Figure 4. Installing the base<br />
onto the pedestal.<br />
Figure 5. Installing spikes.<br />
INSTALLING STANDS (OPTIONAL)<br />
1. Unpack all stand boxes. Place a pedestal, base, and top plate on<br />
a soft surface (e.g, rug or soft cloth).<br />
2. Using a Phillips screwdriver, install a base to a pedestal with five<br />
long screws, as shown in Figure 4.<br />
Base<br />
Pedestal<br />
3. Thread four spikes about halfway into the base and tighten each<br />
one with a locking ring, as shown in Figure 5.<br />
(4) Covers*<br />
(optional for hardwood<br />
or tile floors)<br />
(Optional) Use Covers*<br />
For Hard Floors<br />
*NOTE: Apply a small bead of supplied<br />
silicone adhesive into each cover and<br />
fasten onto each spike. Wait 20 minutes<br />
for silicone to set.<br />
(4) Spikes<br />
(4) Locking<br />
Rings<br />
(5) Long Screws<br />
(Start All Screws<br />
Before Tightening)<br />
continued on next page...<br />
<strong>REVEL</strong> <strong>ULTIMA</strong> <strong>GEM</strong><br />
Owner’s Manual<br />
7