You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
04-3<br />
Wheels, tyres, brakes<br />
4.5 Wheel rims<br />
Use only those wheel rims listed in the vehicle‘s documents.<br />
Please observe the following points, should you wish to use<br />
other wheel rims.<br />
The following applies when using other wheel rims:<br />
- Size,<br />
- construction,<br />
- injection depth and<br />
- The load bearing capacity must be sufficient for the permissible<br />
total axle weight.<br />
- The cone of the fastening screw must correspond to the<br />
construction of the wheel rim.<br />
Adaptations are only permitted if these have been released by<br />
the manufacturer.<br />
Aluminium wheel rims must be tested separately for each type<br />
of vehicle. The screws used on aluminium rims may not be<br />
used for steel rims.<br />
4.6 Spare tire<br />
Spare tire on the AL-KO chassis<br />
A spare tire is part of the scope of delivery only for tandem<br />
axle vehicles with an AL-KO chassis (D 750) and the<br />
Sphinx models.<br />
To remove the spare tire on the AL-KO chassis, use a hexagon<br />
spanner to remove the two screws on the spare tire<br />
holder. Insert the crank on the left-hand side of the spare<br />
tire holder, unhinge the tire holder, lower the spare tire to the<br />
ground and remove it.<br />
For information on the Iveco spare tire, please refer to the<br />
operating instructions for the base vehicle.