TS 102 323 - V1.4.1 - Digital Video Broadcasting (DVB ... - ETSI

42
ETSI
ETSI TS 102 323 V1.4.1 (2010-01)
reresolve_time: The time, on the date given by reresolve_date, after which the receiver should try to re-resolve this
CRID, using UTC as the time reference. This field shall be encoded as the number of 2-second periods since midnight.
7.3.2.3.3 DVB binary locator
The syntax of the DVB binary locator sub-structure is defined by table 31.
Table 31: DVB_binary_locator
Syntax No. of bits Identifier
dvb binary locator() {
identifier type 2 bslbf
scheduled time reliability 1 bslbf
inline service 1 bslbf
reserved 1 bslbf
start date
if (inline service == '0') {
9 uimsbf
DVB service triplet ID
} else {
10 uimsbf
reserved 2 bslbf
transport stream id 16 uimsbf
original network id 16 uimsbf
service id
}
16 uimsbf
start time 16 uimsbf
duration
if (identifier type == '01') {
16 uimsbf
event id
}
if (identifier type == '10') {
16 uimsbf
TVA id
}
if (identifier type == '11') {
16 uimsbf
TVA id 16 uimsbf
component
}
if (identifier type == '00' && scheduled time reliability == '1')) {
8 uimsbf
early start window 3 uimsbf
late end window
}
}
5 uimsbf
identifier_type: This field indicates the type of event identifier used in this DVB binary locator. This field shall be
encoded according to table 32.
See clause 11.1 for details on the semantics of this field.
Table 32: Identifier type
value Meaning
'00' No event identifier field is present.
'01' event identifier is an event_id.
'10' event identifier is a TVA_id carried in EIT.
'11' event identifier is a TVA_id carried in PES.
scheduled_time_reliability: This field only has meaning when the value of identifier_type is '00', i.e. when no event
identifier is provided and the receiver will need to use the scheduled time to control recording. When set, the
early_start_window and late_end_window information shall be provided, which the receiver may use to improve the
reliability of capture of the item of content (see clause 11.1). If the value of identifier_type is not '00' then this field shall
be set to '0'.