TCP/IP Version 2 Release 4 Program Directory - IBM

| 5.3.3 DASD Storage Requirements for IBM Network Station Support
| The storage requirements listed in Figure 21 and Figure 22 on page 29 are applicable only if you intend
| to install the corrective service for IBM Network Station support. See Appendix E, “IBM Network Station
| Support” on page 190 for more information about these and other IBM Network Station requirements.
| 5.3.3.1 DASD Storage Requirements for Target Minidisks
| Figure 21. DASD Storage Requirements for Target Minidisks - IBM Network Station Support
| | |
Minidisk
owner Default
Storage in
Cylinders
FB-512 SFS 4K
Usage
| (User ID) Address DASD CYLS Blocks Blocks
Default SFS Directory Name
| P735FALK 493 3390 64 91200 11400 Test build disk for IBM Network Station
| 3380 76
Client Code
| 9345 76
VMSYS:P735FALK.TCPIP.BUILDNWS
| BOOTPD 191 3390 2 2400 _____ BOOTPD user ID 191 minidisk. (2*)
| 3380 2
| 9345 2
| TFTPD 191 3390 2 2400 _____ TFTPD user ID 191 minidisk.
| 3380 2
| 9345 2
| Notes:
| 1. Cylinder values defined in this table are based on a 4K block size. FB-512 block and SFS values are derived
| from the 3380 cylinder values in this table. FBA minidisk sizes are shown in 512-byte blocks; these minidisks
| should be CMS formatted at 1K size.
| 11400 4K blocks are needed for SFS install, including the IBM Network Station Client Code (10 4K blocks
| without the IBM Network Station Client Code).
| 2. Additional storage may need to be allocated for the BOOTPD 191 minidisk, depending on the number of IBM
| Network Station clients in your environment.
28 TCP/IP V2 R4 for VM Program Directory