Control MFS-05 - MAHLE Industry - Filtration

2. Technical data
Housing
Material: ABS
Design: Dust-tight, max. 3x M32/M20 possible,
ATEX Ex II 3D T60°C
Protection class: IP 65
Operating
temperature:
.
0 - 50 °C
Climatic category: KWF acc. DIN 400040
Control lamp
(≤ 75 % relative humidity,
no condensation allowed)
Operation: LED green
Cleaning: LED yellow
Fault: LED red
Valve display: LED red
Alarm threshold: LED red
Electrical data
Electrical
connection:
Terminal strip 2.5 mm²/valve 1
Voltage (primary): DC 24 V, AC 230 V/50-60 Hz
Tolerance: ± 10 %
Power: 42 W/30 VA
Mains fuse: 3.15 A time-lag/0.315 A time-lag
Valve outputs: 12 (extendable to 24)
Valve voltage: DC 24 V
Tolerance: ± 10 %
Valve current: 1 A (for pulse time ≤ 1 s and
interval time ≥ pulse time, otherwise 0.5 A)
Relay outputs: Pin wiring DC 24 V/0.3 A, AC 250/5 A
(Version with 2
output ralays)
1 change-over contact for operating/fault mes-
.
sage
(fail-safe circuit)
1 normaly open for cleaning message
Inputs: Start or dp input
Enable (contact closed)/Stop (contact open)
Technical data is subject to change without notice!
3. Order numbers
Instant cleaning
Fault acknowledgement (button)
dp switch (optional)
Order number Type designation
79743071 MFS-05 DC 24 V, standard
79743477 MFS-05 DC 24 V, 2 relay outputs
79743055 MFS-05 AC 230 V, 50 - 60 Hz, standard
79742974 MFS-05 AC 230 V, 50 - 60 Hz, 2 relay outputs
Control MFS-05 2