F FEUM MAT® ® Ext tracti ion- a and F Fillin ng de ... - Feumat.com

…WELCOM ME TO YOUUR
FUTURRE
WORKS SHOP + WEELCOME
TO T YOUR FUTURE F WWORKSHOP
+ WELCOOME
TO…
<strong>FEUM</strong> F <strong>MAT<strong>®</strong></strong> <strong>®</strong> <strong>Ext</strong> <strong>tracti</strong><strong>ion</strong>-
<strong>and</strong> a <strong>Fillin</strong> F ng de evices
for ABBC/poowder
fire exxtingu
uisher‘ ‘s insppect<strong>ion</strong>
<strong>and</strong>
maiintena
ance
A careful l fire extingguisher
che eck serves primarily
for the reggular
extinnguisher’s
funct<strong>ion</strong> f
for the usser’s
security
– he is after a all woorking
with h high pressure
Today the suctioon
process in mainten nance is sttill
h<strong>and</strong>ma ade in many y workshopps
– assoc ciated with a lot
of time e <strong>and</strong> efforrt,
hard worrk
<strong>and</strong> dust
loading. TThe
extinguish
agent t must be laaboriously
y loosed annd
transfe erred with a suct<strong>ion</strong> ttube
<strong>and</strong> with w physicaal
exert<strong>ion</strong>.
The <strong>FEUM</strong>AT<strong>®</strong>
F <strong>®</strong> <strong>Ext</strong>ractioon-
<strong>and</strong> filling
deviices
for powder
ex xtinguisheers
enable all work steps
of
a high quuality
inspeect<strong>ion</strong>
<strong>and</strong> maintenannce
for all types
of AB BC/powder r fire exting guishers.
witthout
dust exposit<strong>ion</strong> n
wwithout
hea avy hoist
ssaving
a lo ot of time
ssaving
ener rgy costs

After decompress<strong>ion</strong> <strong>and</strong> opening of the extinguisher you connect (couple) it on a swivel arm with
assistance of an adapter system. By this step a venting tube is completely compact lost in the powder.
From this moment on the device is working for you with a generated vacuum.
At the push of a button you can turn <strong>and</strong> move the connected extinguisher with the pneumatic swivel arm
around up to 180 degrees. The powder will be completely absorbed, carefully filtered <strong>and</strong> collected by a
connected ex<strong>tracti</strong>on system. For the refilling you disconnect (decouple) the empty extinguisher from the
rotat<strong>ion</strong> device <strong>and</strong> exchange it with the collecting container: The process can be already repeated.
By an educated operat<strong>ion</strong> the whole inspect<strong>ion</strong> process needs up to 8 minutes instead of 20 minutes with
a manual suct<strong>ion</strong>. You <strong>and</strong> your stuff must not heave the extinguishers any more – the <strong>FEUM</strong>AT system
can be easily connected to your workbench.
Added to this, with the rotat<strong>ion</strong> device you can control the ex<strong>tracti</strong>on process at the push of a button –
that preserves your back <strong>and</strong> saves electricity in comparison to the manual process.
The <strong>FEUM</strong>AT<strong>®</strong> <strong>Ext</strong>ract<strong>ion</strong>- <strong>and</strong> filling units offer to you…
a time saving of over 12 minutes per each inspected extinguisher
healthy work environment – you neither breath in the dust nor hoist too much
economizing energy costs – less suct<strong>ion</strong> capacity is needed.
saving the environment – your workshop will not be contaminated with dust. You can use it for
other operat<strong>ion</strong>s, too
innovating technique – your advantage into the future of fire extinguisher’s maintenance
Our address of contact for detailed product descript<strong>ion</strong>/brochures:
<strong>FEUM</strong>AT<strong>®</strong> GmbH & Co. KG
Dalbker Str. 138
D-33813 Oerlinghausen
Tel.+49 (0) 5205-8789-110
Fax+49 (0) 5205-8789-112 info@feumat.de www.feumat.de