Data Sheets And Application catalog - inpack GbR VCI packaging

Data Sheets 

And 

Application catalog

Company profile 

Grofit Plastics specializes in the field of flexible 

packaging products made from LDPE and LLDPE. The 

plant complies with QA Standard ISO 9002. 

VCI. ACTIVE PACKAGING TO SOLVE CORROSION PROBLEMS 

Grofit Plastics specializes in the field of packaging products for 

preventing corrosion, mainly for the automotive, metal markets 

(spare parts, production, shipping & storage) telecommunication 

aerospace and. The technology used is VCI-Volatile Corrosion 

inhibitor which replaces use of oils as well as other conventional 

methods. 

Major customers: 

MAN (Germany). 

Daimler Chrysler (Germany, Italy). 

Volvo (Sweden). 

Autoliv (Sweden). 

GE (Germany, Spain). 

Cummins (USA). 

Caterpillar (Italy). 

Nortel networks (USA,UK). 

GM (USA). 

Motorola and more. 

Products 

We offer a full range of VCI flexible packaging products 

Including: bags, gusset bags and covers, film, Emitters, 

paper, stretch film and more… 

For more information please go to: www.vci2000.net

AUTOMOTIVE APPLICATION 

Customer: 

Application: 

Anti corrosion VCI packaging of cylinder liners. 

Location: 

USA. 

Packaging material: 

VCI2000 High barrier Bag. 

Protection period: 

Up to 24 months. 

Our uniqueness in the field of corrosion protection is possible due to 

our ability to control all the production stages of our VCI packaging 

from the VCI synthesis through VCI masterbatch production and finally 

film and packaging production. 

We offer a full range of VCI flexible packaging products including: 

bags, gusset bags and covers, film, tube film, stretch film and more.... 

Our major customers in the automotive and metal industry are: 

General Electric, Nortel networks, General Motors, MAN, Daimler- 

Chrysler, Volvo and more…


Customer: 

Ford. 


Anti corrosion VCI packaging of body parts. 

Location: 

India. 


VCI2000 Box liner. 








bags, gusset bags and covers, film, tube film, stretch film and more....


Customer: 

Mercedes Benz. 


Anti corrosion VCI packaging of engine parts. 

Location: 

Germany. 


VCI2000 heat seal bags. 










Customer: 



Location: 

Turkey. 


VCI2000 heat seal covers perforated on a roll. 











Chrysler, Volvo and more...


Customer: 

Truck manufacturer. 



Location: 

Sweden. 


VCI2000 gusset bags perforated on a roll. 












OEM APPLICATION 

Customer: 

Biesse. 


Anti corrosion VCI packaging of a machine. 

Location: 

Italy. 


VCI2000 Shrink film. 











Chrysler, Volvo and more....


Customer: 

Leading Tractor Manufacturer. 



Location: 

Spain. 


VCI2000 box liner. 













Customer: 

General Electric. 


Anti corrosion VCI packaging of Engine block. 

Location: 

Germany. 


VCI-2000 cover, VCI2000 powder packs. 













Customer: 

Engine Parts Manufacturer. 


Anti corrosion VCI packaging of Engine parts. 

Location: 

Germany. 


VCI2000 High strength bags. 













Customer: 


Anti corrosion VCI packaging Engine. 

Location: 

USA. 


VCI2000 Shrink covers. 












BEARING APPLICATION 

Customer: 

Timken, FAG 


VCI packaging for ball bearings. 

Location: 

Romania and Germany. 


VCI-2000 Embossed film. 












BEARING APPLICATION 

Customer: 

SKF 


Anti corrosion VCI film for automatic packaging 

of high temperature bearings. 

Location: 

Sweden. 


VCI-2000 Co-Ex film. 









MILITARY APPLICATION 

Customer: 

Military. 


Anti corrosion VCI Preservation of a whole 

Tank 















Customer: 

Military. 


Anti corrosion VCI packaging of cannon 

barrels. 


VCI-2000 Co-Ex film, VCI-2000 Rod 











Chrysler, Volvo and more…


Customer: 

Military. 


Anti corrosion VCI packaging of M-16 Gun. 


VCI-2000 Co-Ex film, VCI-2000 Rod 










Customer: 

Military. 


Anti corrosion VCI Preservation of tank 

engines. 


VCI-2000 Co-Ex woven bags 













Customer: 

Military. 


Anti corrosion VCI Preservation of tank Gear. 


VCI-2000 Co-Ex woven bags 












STEEL APPLICATION 

Customer: 

Ormat Industries. 


Anti corrosion VCI Preservation of heat 

exchanger pips. 

Location: 

Israel. 















Customer: 

SKF. 


Anti corrosion VCI Preservation of steel rods 

Location: 

Sweden. 












Customer: 

SKF. 


Anti corrosion VCI Preservation of steel rod for 

bearings. 

Location: 

Sweden. 











TELECOM APPLICATION 

Customer: 


Anti corrosion VCI Preservation and ESD 

protection of communication cabinet. 

Location: 

USA, UK. 


VCI2000 ESD Co-Ex cover and foam pads. 









ELECTRIC APPLICATION 

Customer: 

. 


Anti corrosion VCI Preservation of generator. 

Location: 

USA. 











Test reports 

And approvals 

Corrosion test according to MIL-REF-22019D 

Compliance with VW and TRGS615 Guideline on 

the Use of VCI Materials.

Test Report 

No. 5543/05 

Testing of a VCI film according to MIL-PRF-22019D 

Client GROFIT PLASTICS 

Content of the order 

M.P.EILOT 

88825 Israel 

Samples of VCI film were supplied to the BFSV by the client on February 15, 2005. 

Description: „VCI 2000 film“ 

The following characteristics of the VCI film were tested according to 

MIL-PRF-22019D: 

• Compatibility with copper 

• Vapor inhibitor ability (VIA) 

• Contact corrosivity 

• Blocking resistance 

Summarizing result 

The tested characteristics of the „VCI 2000 film“ fulfill the requirements of 

MIL-PRF-22019D. 

The table in Appendix 1 compares the results of the individual tests with the 

requirements of MIL-PRF-22019D. 

Date : March 03, 2005 

Pages : 2 

Appendix : 1 

Official in Charge: Dipl.-Ing. W. Reimers 

The contents may duplicated only unabridgedly. 

Exceptions require our written permission. 

The accreditation applies to the test methods listed in the annex to the certificate.

Page 2 of Test Report No. 5543/05 

Tests performed 

The „VCI 2000 film“ was tested in accordance with: 

MIL-PRF-22019D 

„PERFORMANCE SPECIFICATION; 

BARRIER MATERIALS, TRANSPARENT, FLEXIBLE, SEALABLE, VOLATILE 

CORROSION INHITOR TREATED“ 

Edition: 14 July 2004 

• Compatibility with copper 

(Test method according to MIL-PRF-22019D) 

• Vapor inhibitor ability (VIA) 

(Test method 4031 procedure B according to FED-STD-101) 

• Contact corrosivity 

(Test method 3005 according to FED-STD-101, test surfaces: steel and aluminium) 

• Blocking resistance 

(Test method 3003 according to FED-STD-101) 

Director of the Institute Official in Charge 

Prof. Dr. H. Kontny Dipl.-Ing. W. Reimers

Appendix 1 to Test Report No. 5543/05 

Test results according to MIL-PRF-22019D 

GROFIT PLASTICS: „VCI 2000 film“ 

Characteristics Requirements Test Results 

Compatibility with copper No pitting, etching or discoloration 

of vapor exposed 

copper surface, discount 

attacks within 1/16 inch of 

specimen 

Vapor inhibitor ability (VIA) No corrosion, etching, or 

pitting of the steel panel’s 

polished surface 

Contact corrosivity 

(test surfaces: steel and aluminium) 

No corrosion, etching, or 

pitting 

Blocking resistance No blocking, delamination, 

or rupture 

Vapor inhibitor ability (VIA): 

Evaluation 

Corrosion symptoms 

Control panel 

(without VCI) 

Corrosion on the 

entire surface 

Steel panels 

Protected panels with 

„VCI 2000 film“ 

All three steel panels: 

No visible corrosion 

As required 

As required 

(see below) 

As required 

As required

Test Report 

No. 4643B/00 

Testing of the corrosion protection effect of VCI-film 

Client GROFIT PLASTICS 

M.P. EILOT 

Content 

of the order 

88825 Israel 

The 

client supplied one VCI-film to the BFSV on September 19, 2000. 

Description: 

VCI-2000 Film 

The 

corrosion protection effect of the VCI-film had to be tested. 

In order to perform this, a sample with LDPE-film and without VCI-substance (reference 

sample) as well as a sample with VCI-protection were produced and a changing clilmate 

testing was performed (simulation of climatic shipping stress). 

After the test the corrosion effects on the metals were examined visually and the based 

on this examination the corrosion protection effect of the VCI-film was evaluated. 

Summary result 

Corrosion 

protection effect of the VCI-2000 Film at: 

- Steel: Good 

- Brass: Good 

- Copper: Good 

Date : October 31, 2000 

Pages : 3 

Appendices : 2 

Official in Charge : Dipl.-Ing. W. Reimers 

This report may only be reproduced in its full wording. 

Exceptions require the written consent of the Institute of BFSV. 

The accreditation applies to the test methods listed in the certificate.

Page 2 of Test Report No. 4643B/00 

1. Test performed 

1.1 

Films 

For 

the reference sample: LDPE-film without VCI-substance (thickness: 100 µm) 

For the VCI-protected samples: VCI-2000 Film (thickness: 100 µm) 

1.2 

Metal samples 

- Steel (St 37) 

- Brass (Ms 60) 

- Copper (El-Cu) 

Dimensions 

of the metal samples: 75 x 50 mm, thickness: 3 mm. 

Before the beginning of the testing the surface of the samples was grinded (Abrasive 

paper: 320) and cleaned with methane. 

The samples made of zink coated steel were only cleaned with methane. 

1.3 

Testing apparatus 

The metal samples for each testing sample were fixed to a plastic holder with two plastic 

rings at the ends in order to grant certain distance and to prevent the films touching the 

samples. 

Bags were manufactured from each film (volume about. 10 l), the sample holders were 

inserted and the ends of the bags were welded. 

The prepared samples were stored at room temperature (about 20 °C) (conditioning 

phase, duration: 24 h). 

After that a paper that had been soaked with 5 ml deionised water was inserted in the 

bags and the bags were closed again. 

Picture 1 in Appendix 1 shows the prepared samples. 

1.4 

Testing 

In order to produce cyclical bedewing of the metal samples, the following changing 

climate 

testing was performed with the samples in a climatic chamber: 

40 °C / 90 % RH 5 h 

Change to 10 °C / 90 % RH 1 h 

10 °C / 90 % RH 5 h 

Change to 40 °C / 90 % RH 1 h 

- Cycle duration: 12 h 

- Number of cycles: 20 (10 days) 

After the testing the film bags were cut open and the metal samples were dried at room 

temperature (1 h) and the corrosion effects were visually examined and documented.

Page 3 of Test Report No. 4643B/00 

2. Test results / Examination of the metal samples 

In 

the following table the corrosion effects and their area percentages are listed. 

Film 

LDPE-film 

Reference 

sample 

VCI-2000 

Film 

Corrosion on the metal samples 

(Area percentages) 

Steel Brass Copper 

Brown spots, 

intensified at 

the 

peripheral 

area 

Discolouring of 

the surface 

(ca. 40 %) 

(ca. 5 %) 

No corrosion Very slight 

discolouring of 

the surface 

(< 1 %) 

Discolouring of 

the whole 

surface 

(100 %) 

Slight 

discolouring of 

the surface 

(< 5 %) 

Picture 

2 in Appendix 1 shows the metal samples of the reference sample before the test. 

Picture 3 in Appendix 2 shows the state of the metal samples after the test: 

- Reference sample 

- VCI-2000 Film 

3. Evaluation of the corrosion protection effect 

Based on the corrosion effects of the unprotected reference sample and on the intensity 

of the climatic stress, the examination of the test results leads to the following judgement 

of 

the corrosion protection effect of the VCI-2000 Film: 

Corrosion 

protection effect of the VCI-2000 Film at: 

- Steel: Good 

- Brass: Good 

- Copper: Good 

Head of the institute Official in Charge 

Prof. K.-R. Eschke Dipl.-Ing. W. Reimers

Appendix 1 to Test Report No. 4643B/00 

Picture 1: film bags with metal samples (prepared samples) 

Steel Brass Copper 

Picture 2: metal samples of the reference sample before the test

Appendix 2 to Test Report No. 4643B/00 

LDPE-Film (reference sample) 

VCI-2000 Film 

Picture 3: state of the metal samples after the test

ESD-approved products 

SP Swedish National Testing and Research Institute 

The technical requirements for each product type are to the highest possible extent identical to 

requirements established by applicable international standards. Unfortunately the standards are 

not in all parts consistent, have full coverage, etc., why some requirements have had to be 

altered, supplemented or deleted. The adherence/deviations to standards are explained for each 

type of product in SP-Method 2472, clause 7.3 and respective appendix. 

Generally, it is possible to claim that an "ESD-approved" product fulfils the basic requirements of 

IEC 61340-5-1 and EN 100015-1. 

ESD-approval DNo: 230-02-0059 

Holder of the approval 

TriboTec AB, Sweden 

Date of issue 

2002-06-25 

Approval valid until 

2005-06-25 

SP Test Report 

F2 09609 

Conditions 

SP-Method 2472 

Marking 

ESD-approved products shall be marked according to SP-Method 2472, section 6.3. Ericssonapproved 

packaging material shall additionally fulfil requirements according to Ericsson´s 

document 125 23-LXE 107 268 Uen 

Other information 

The material is approved as Class B, i.e. as low charging material within EPA 

Manufacturer / 

supplier 

Type 

designation 

Grofit Plastics VCI-2000 

Product 

description 

Bags and film 

made of green 

plastic. 

Tested for 

Ericsson 

approval 

Approved 

Ericsson 

approval no

INSTITUTE FOR CORROSION PROTECTION 

DRESDEN GMBH 

Private Scientific Research Unit 

Consultancy - Claims resolution - Quality Assurance - Research- Testing 

• Accredited analytical laboratory for corrosion, corrosion protection, and corrosion analysis 0351 871 7100 

• DAR registered number: DAP-PL-1131.00 Fax 0351 871 7150 

• Institute in association with the Technischen Akademie Wuppertal e. V. 0351 871 7123 

• Institute at the TU Bergakademie Freiberg 

Institute for Corrosion Protection Dresden GmbH • Gostritzer Str. 61 – 63 • 01217 Dresden 

Test Report 

UB400/27/05 

Client: inpack 

Mr Rüdiger Götz 

Hauptstraße 34 

79540 Lörrach 

Order date: 20.01.2005 

Test period: 07.03. - 17.03.2005 

Assignment: Quantitative determination of nitrite, primary, secondary and tertiary amines 

in a VCI corrosion-protection film in accordance with the guidelines on the 

use of VCI materials, and the Standard Operating Procedure for Testing 

VCI Materials of Volkswagen AG Wolfsburg 

Number of pages: 3 

Processed by: 

Head of department: 

Dresden, 21.03.2005 

................................... 

Dr. J. Triebert 

................................... 

Dr. A. Schütz 

The partial publication of test reports or references to tests for advertisement purposes requires the written authorisation of IKS in all cases. Unless otherwise 

agreed, we reserve the right to dispose of the test materials three months after delivery of the test report. These statements refer exclusively to the test 

specimens .

I N S T I T U T E FO R C O R R O S I O N P R O T E C T I O N D R E S D E N G M B H 

4 Assessment 

UB400/27/05 Page 3 of 3 

Following analysis of the VCI film, the latter was shown to have a nitrite content (calculated as NaNO2) 

smaller than 0.1 Ma % and to be free of nitrosable secondary amines. The results therefore comply with 

the requirements of the "Guideline on the Use of VCI Materials, and the Standard Operating Procedure 

for Testing VCI Materials" of Volkswagen AG Wolfsburg. 

The test results for the film also comply with the requirements of TRGS 615, Paragraphs 4.2 and 4.3. 

S:\400\UB_GU\2005\UB400-27-05 VCI Inpack.doc

Purpose: 

This procedure establishes recommended guidelines for selecting and implementing Volatile Corrosion 

Inhibitors (VCI's) 

When: 

Volatile Corrosion Inhibitors are intended for corrosion protection of various sized ferrous and nonferrous 

materials during short term storage, long term storage, and overseas shipment. 

How: 

Time: 

1. Choose a VCI supplier who will travel onsite to observe the current manufacturing/handling 

process. 

2. The VCI supplier will then make recommendations regarding specific VCI products to be used for 

corrosion protection. 

3. The VCI supplier will support the implementation of these products. 

4. The VCI supplier will prepare a final inspection report regarding the current effectiveness of the 

process. 

On average the supplier will work with you on site for approximately 6 months. 

Who: 

When planning for the use of a VCI product it is important to contact a VCI supplier who will travel onsite 

and observe current processes. Listed below is the contact information for suppliers that FMC has had 

interaction with: 

!" # $% 

& & ' () ** +$ 

*+ , $ - +.* 

. 

/+,* 01 

'( & *+ 

$, $ 2 $,% 

Ford Materials Engineering is also available for support and consultation in this process. Go to 

http://www.dearborn3.ford.com/met/minnich/materials_engine1.htm for Ford Materials Engineering 

contact information. 

K. Keller 

11/11/2004

. 

VCI2000 Packaging 

Data Sheet 

VCI-2000 Co Ex Film and Tube 

Construction 

Description 

VCI-2000 Co Ex Films and Tubes are made with the latest polymer technology and 

Impregnated in low temperature with vapor corrosion inhibitors (VCI’s) 

to protect ferrous and most non-ferrous metals from corrosion. 

LONG TERM CORROSION PROTECTION 

The slow release vapor action protects the exterior as well as hard-to-reach interior 

. . surfaces. . It is self-healing . and will . provide 24 months . of long-term . protection . for storage . . 

and overseas shipments. Simply pack the metal object with a VCI-2000 film or Tube 

The VCI on the film volatilizes and migrates with air then condenses on all metal 

surfaces, reaching all exposed and recessed areas. 

VCI-2000 Films and Tubes provide a high level of corrosion protection 

along with the excellent vapor barrier properties. 

METALS PROTECTED 

carbon steels, stainless steels, copper, brass, aluminum, silver, galvanized steel, solder. 

Properties Test method Unit Value 

Thickness (type D2) Micron 100 

Heat seal strength 160 0 C/1SEC/50PSI gr/10mm 2000 

Tear strength MD ASTM D1004 N/mm 2 16.5 

Tear strength TD ASTM D1004 N/mm 2 

Elongation MD ASTM D882 % 

15.6 

580 

Elongation MD ASTM D882 % 610 

Oxygen transmission ASTM 3985-88 cc/m 2 /day 60-70 

Water vapor trans’ gr/m2/day 5 

Corrosion tests 


Corrosion protection GP VIA 2 hr RH 100% Pass 

Corrosion protection GP Razor blade Pass 

Recycling : Together with polyethylene @ 280 0 c 

Grofit Plastics Europe 

Lligallo de la Lloma s/n 43560 La Senia Spain 

Tel: +34 647 466251 e-fax:001-775-2433583 

E-mail :info@vci2000.net 

Internet: www.vci2000.net

. 

Grofit Plastics 


VCI-2000 High Strength Co-Ex Film and Bags 

Construction 

MDPE/HDPE 

Polyolefin 

VCI 

Description 

VCI-2000 high strength films and bags are made with the latest polymer technology and 


to protect ferrous and most non-ferrous metals from corrosion. VCI-2000 high strength 

films and bags designed for superior strength properties are needed as well as for down 

. . gagging . to a thinner . film or bag application. . . . . . . 



surfaces. It is self-healing and will provide 24 months of long-term protection for storage 

and overseas shipments. Simply pack the metal object with a VCI-2000 film or Tube 

The VCI on the film volatilizes and migrates with air then condenses on all metal 

surfaces, reaching all exposed and recessed areas. 



Properties Test method Unit 5 Mil 6 Mil 

Heat seal strength 160 0 C/1SEC/50PSI N/mm 2 20.90 25.50 

Tear strength MD ASTM D1004 N/mm 2 28.99 30.75 



26.00 29.0 

845 902 

Elongation TD ASTM D882 % 975 1002 



Corrosion protection GP VIA 2hr 100%RH Pass 





Tel: +34 647 466251 e-fax:001-775-2433583 



. 



VCI-2000 ANTI STATIC BAGS & FILMS 

Construction 

Anti Static LDPE 

Anti Static LDPE 

VCI Anti Static 

Anti static bags meet type 2 requirements under MIL-B-81705. 

The unique feature of VCI anti static bags is their ability to provide 

corrosion and oxidation protection to electronic components. 

The antistatic and anticorrosion inhibiting properties of the packaging are 

. . . . . . . . . . 

humidity independent. The unique composition does not 

require the presence of moisture to function and the product contains no 

free amines. 

Grofit Plastics anti static VCI bags effectively protect contents from 

Triboelectric charge generation and from corrosion, pitting, oxidation, 

staining, and galvanic corrosion. 

ADVANTAGES 

Humidity independent 

Provides multimetal VCI protection prevents corrosion of ferrous and non 

ferrous metals. 

Does not contain free amines, nitrites and other toxic compounds. 


Steel, iron, copper, brass, solder, aluminum and various plated substrates, 

silver, nickel, cadmium, zinc. 

PERFORMANCE 

Surface Resistivity ------------ < 10 12 ASTM D 257 

Static decay rate -------------- 0.7 sec 5000-0 volts EIA 541 

Triboelctric charge ------------ 0.12 NC/SQ INCH EIA 541 



Lligallo de la Lloma, s/n 

Tel: +34 977 713 562 cell: +34 647 466 251 



. 



VCI2000 TM 

Anti-static ESD Emitters 

Easy to Install, Effective to Use 

. . . . Product . Description . . . . . 

VCI2000 emitters are designed to prevent corrosion on metals inside cabinets and 

enclosures where ESD properties are also needed. The protective vapors begin to 

work immediately upon installation, and will last for up to 2 years. 

Use as many as you need for the size of the cabinet, crate or box. 

Corrosion Protection 

Protects up to 8.0 cu.ft (230 liters) for up to 24 months. 

Effective on steel, copper, zinc and multi-metal parts. 

Applications 

Electronics equipment, telecommunication equipment, control panels, marine 

equipment, containers, shipping crates, military equipment and more. 

Typical Properties 

Dimensions: 3 5/16” x 8 3/16” x 1/8” (84mm x 210mm x 3mm). 

Color: Green 

Surface Resistivity ------------ < 10 12 Ohms/sq. ASTM D 257 

Static decay rate -------------- 0.7 sec 5000-0 volts EIA 541 

Triboelectric charge ------------ 0.12 sq.inch EIA 541 

Storage: Do not store above 130 0 F (55 0 C) 

Recycling : Together with polyethylene @ 280 0 C 



Tel: +34 977 713 562 cell: +34 647 466 251 



. 

Grofit Pastics. 


Co-Ex VCI-2000 Embossed Bearing Film 

Construction 

LLDPE 

Polyolefin 


Description 

VCI-2000 Embossed film is made with the latest polymer technology and 


to protect ferrous and most non-ferrous metals from corrosion. VCI-2000 Embossed film 

. . designed . for superior . strength properties . are needed . in automatic . packaging . application. . . 




and overseas shipments. 


carbon steels, stainless steels, copper, brass, and aluminum. 

Physical Properties 

Properties Test method Unit Blue White 

Film Width MM 70 70 

Thickness Micron 180 180 

Tensile strength MD ASTM D882 PSI(Mpa) 2990 (20.6) 2400 (16.5) 





Tel: +34 977 713 562 cell: +34 647 466 251 


Internet: www.vci2000.net 

718 639

. 

Grofit Plastics. 


VCI-2000 Co-Ex cast Stretch film 

Mmanual/Machine. 

Construction 

LLDPE 

LLDPE VCI 


Description 

VCI-2000 Co-Ex Silent Stretch are made with the latest polymer technology and 


to protect ferrous and most non-ferrous metals from corrosion. 


The slow release vapor action protects the exterior as well as hard-to-reach interior surfaces. It is self-healing 

and will provide 24 months of long-term protection for storage and overseas shipments. Simply place the metal 

. . object on . top of a VCI-2000 . film sheet, cover . with another . and stretch wrap. . . . . 

The VCI on the film volatilizes and migrates with air then condenses on all metal surfaces, reaching all exposed 

and recessed areas. 

VCI-2000 Co-Ex Films and Tubes provide a high level of corrosion protection 

along with the excellent vapor barrier properties. 




Thickness (type D2) ASTM E-252 Micron 25/35 





Impact ASTM D-1709 gr/µ 8 


26.8 






Tel: +34 977 713 562 cell: +34 647 466 251 



All statements, technical information and recommendations contained herein are based on tests Grofit Plastics believes to be reliable, but the accuracy or 

completeness thereof is not guaranteed. Grofit Plastics warrants Grofit Plastics Products will be free from defects when shipped to customer. Grofit Plastics 

obligation under this 

warranty shall be limited to replacement of product that proves to be defective. To obtain replacement product under this warranty, the customer must notify 

Grofit Plastics of the claimed defect within six months after shipment of product to customer. All freight charges for replacement products shall be paid by 

customer. Grofit Plastics shall have no liability for any injury, loss or damage arising out of the use of or the inability to use the products. 

BEFORE USING, USER SHALL DETERMINE THE SUITABILITY OF THE PRODUCT FOR ITS INTENDED USE, AND USER AS-SUMES ALL RISK AND 

LIABILITY WHATSOEVER IN CONNECTION THERE WITH. No representative or recommendation not contained herein shall have any force or 

effect unless in a written document signed by an officer of Grofit Plastics. THE FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL 

OTHER WARRANTIES, EXPRESS, IMPLIED OR STATU-TORY, INCLUDING WITH OUR LIMITATION ANY IMPLIED WARRANTY OF 

MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE. IN NO CASE SHALL GROFIT PLASTICS BE LIABLE FOR INCIDENTAL OR 

CONSEQUEN-TIALDAMAGES. 

500

. 



VCI-2000 ZIPPER BAGS 

LDPE 

LDPE 


Construction 




and overseas shipments. 

. . . . . . . . . . 


carbon steels, stainless steels, copper, brass, aluminum, silver, galvanized steel, solder, 

silicone steel. 

Stock sizes 100x150 150x200 200x250 230x300 300x400 

P/N VCIZ00001 VCIZ00002 VCIZ00003 VCIZ00004 VCIZ00005 


Thickness (type D2) Micron 100 

Heat seal strength 160 0 C/1SEC/50PSI gr/10mm 2000 

Haze % 5%-7% 




15.6 

580 


Oxygen transmission ASTM 3985-88 cc/m 2 /day 60-70 



Corrosion protection GP 12 cycles Pass 

Corrosion protection GP 8 cycles Pass 




Tel: +34 977 713 562 cell: +34 647 466 251 



. 



VCI-2000 High Strength Woven Film. 

Recyclable steel coil and heavy parts wrapping. 

Construction 

VCI/LLDPE 50 Gr 

Woven HDPE 200 Gr 

Description 

VCI-2000 high strength films and bags are made with high strength HDPE woven fabric 

and the latest polymer technology. 

Impregnated at low temperatures with vapor corrosion inhibitors (VCI’s). 

they are ideal for protecting ferrous and most non-ferrous metals from corrosion. 

. . VCI-2000 . high strength . films and . sewn covers are . designed for . when superior . strength . . 

properties are required as well as high puncture and pressure resistance. 




and overseas shipments. Simply pack the metal object with Ferrowrap VCI-2000 woven 

film. 

The VCI on the film volatilizes, migrates through the air and then condenses on all metal 

surfaces, reaching even recessed areas. 


carbon steels, stainless steels, copper, brass, aluminium, silver, galvanized steel, solder. 

Properties Test method Unit 250 G/m 2 

Tear strength MD ASTM D 882 N/mm 2 93 

Tear strength TD ASTM D 882 N/mm 2 

Dart drop ASTM D 1709 grams 6400 








Tel: +34 977 713 562 cell: +34 647 466 251 



60

. 

Grofit Plastics. 


VCI-2000 Powder 

Pack #3 (Vapor Corrosion 

Inhibitor) 

Product Description 

Each VCI-2000 Powder Pack#3 contains a 

Vapor Corrosion Inhibitor (VCI) powder which 

protects ferrous and non-ferrous metals against 

corrosion, oxidation, tarnish and discoloration. 

. . Provides . an extremely . efficient . method . for the . dry preservation . of . . 

metal parts within an enclosed space. The VCI vaporizes and then 

adsorbs on all metal surfaces, reaching even the most difficult to reach 

recesses and interior voids. 


Protects up to 1.0 cubic foot (28 liters) for up to 24 months. 

Application 

VCI-2000 Powder Pack#3 is designed to protect metals inside an 

enclosed container such as a cardboard box, crate, plastic or metal bin, 

poly bag or envelope. Do not open the Powder Pack. Simply place 

the pouch in the container with the parts to be protected and close the 

container. 


Powder Pack: 

Form.........................VCI powder inside a Tyvek ® “breathable” pouch 

Appearance............…White pouch with blue/gray print 

Dimensions ......……...1.5” x 3” (40mm x 80mm) 

Packaging…………….. 250 units packed in a barrier bag. 

Storage…………………..Do not store above 130 0 F (55 0 C) 

VCI Powder (inside): 

Content appearance……………..White powder 

Tyvek ® is a registered trademark of Dupont Company 



Tel: +34 647 466251 e-fax:001-775-2433583 



. 

Grofit plastics. 



Pack #115 

(Vapor Corrosion Inhibitor) 


Each VCI-2000 Powder Pack#115 contains 

a Vapor Corrosion Inhibitor (VCI) powder 

which protects ferrous and non-ferrous metals 

against corrosion, oxidation, tarnish and 

discoloration. 

Provides an extremely efficient method for the 

. . dry . preservation . of metal . parts within . an . . . . 

enclosed space. The VCI vaporizes and then adsorbs on all metal 

surfaces, reaching even the most difficult to reach recesses and 

interior voids. 


Protects up to 1cubic meter (1000 liters) for up to 24 months. 


VCI-2000 Powder Pack#115 is designed to protect metals inside 

an enclosed container such as a cardboard box, crate, plastic or metal 

bin, poly bag or envelope. Do not open the Powder Pack. Simply 

place the pouch in the container with the parts to be protected and 

close the container. 

Typical Properties” 

Powder Pack: 

Form.........................VCI powder inside a “breathable” pouch 

Appearance............…White pouch with blue/gray print 

Dimensions ......……...4" x 6” (100mm x 150mm) 

Packaging…………….. 10 units packed in a barrier bag. 

Storage…………………..Do not store above 130 0 F (55 0 C) 

VCI Powder (inside): 

Appearance……………..White powder 

Tyvek ® is a registered trademark of Dupont Company 



Tel: +34 977 713 562 cell: +34 647 466 251 



. 



Product Data Sheet 

VCI 2000 Foam Pad Emitters 

VCI 2000 foam provides both excellent cushioning and corrosion protection of 

metals within a package or enclosed space. 

. . . . . . . . . . 

VCI 2000 foam is manufactured using a unique blending process in which a 

concentrated level of volatile corrosion inhibitor (VCI) is infused into the 

foam, allowing maximum volatilization while maintaining the physical 

characteristics of the foam and providing long-term corrosion protection 


Foam type: Polyurethane open cell 

Size: 254 x 254 x 6.35mm (10” x 10” x ¼” ) 

Also available in custom sizes. Ask for details. 

Corrosion protection: Up to 230 liters (0.23 m³), 8 cubic feet for 24 months. 

Odor: Some 

Color: Blue 


Provides corrosion protection and cushioning during transport of automotive, 

telecommunications, and electronic parts. Can be used in conjunction with 

traditional VCI packaging, such as poly bags and when additional non-abrasive 

protection is also desired. 

Metals Protected 



Tel: +34 977 713 562 cell: +34 647 466 251 



Carbon steel, iron, stainless steel, copper, brass, aluminum, zinc galvanized steel, 

solder.

. 



VCI-2000 PAPER 

LONG TERM CORROSION PROTECTION FOR STEEL COILS 


surfaces. It is self-healing and will provide 24 months of long-term protection for 

storage and overseas shipments under normal conditions 


Ferrous metals, carbon steels, Galvanized metal, Aluminum. 

. . . . . . . . . . 

Construction 


PAPER 


Properties Unit Value 

Density (total weight) Gr/sq.m 50/70/90/120 

Corrosion Inhibitor Gr/sq.m 10 

PE Gr/sq.m optional 

Paper Gr/sq.m 

Width mm 

40/60/80/110 

As per order 

Roll weight kg “ 

Core mm 76 



Tel: +34 977 713 562 cell: +34 647 466 251 



. 




VCI 2000 Foam Pad Emitter. 

VCI 2000 foam provides both excellent cushioning and corrosion protection of 

metals within a package or enclosed space. 

. . . . . . . . . . 

VCI 2000 foam is manufactured using a unique blending process in which a 

concentrated level of volatile corrosion inhibitor (VCI) is infused into the 

foam, allowing maximum volatilization while maintaining the physical 

characteristics of the foam and providing long-term corrosion protection 


Foam type: Polyurethane open cell 

Size: 254 x 254 x 6.35mm (10” x 10” x ¼” ) 

Also available in custom sizes. Ask for details. 

Corrosion protection: Up to 230 liters (0.23 m³), 8 cubic feet for 24 months. 

Odor: Amine. 

Color: off white. 



telecommunications, and electronic parts. Can be used in conjunction with 

traditional VCI packaging, such as poly bags and when additional non-abrasive 

protection is also desired. 




Tel: +34 977 713 562 cell: +34 647 466 251 




solder.

. 




VCI 2000 LamiFoam (closed cell) 

LDPE foam 


VCI 2000 LamiFoam is a laminated VCI packaging material that combines LDPE 

. . . . . . . . . . 

foam laminated to volatile corrosion inhibitor film to create a strong, lightweight 

composite sheet. VCI 2000 LamiFoam is thinner, denser, and stronger than other 

open cell foams, and offers all the VCI advantages and benefits. 



solder. 

Features 

Non-abrasive, excellent surface protection. 

Will not scratch or damage finely finished surfaces. 

Lint and dust free, Will not mark or contaminate products. 

Can be safely used to protect highly sensitive products. 

Laminate film structure adds rigidity and puncture resistance. 


Foam type: LDPE closed cell. 

Available Size: 3/32”, 1/16”, 1/8” thickneses and up to 72” widths. 

Bags are available in custom sizes. Ask for details. 

Color: Blue. 

Corrosion protection: Up to 24 months. 



telecommunications, and electronic parts and delicate devices. 




Tel: +34 977 713 562 cell: +34 647 466 251 



. 



VCI-2000 SF Powder 





Tel: +34 977 713 562 cell: +34 647 466 251 



VCI POWDERS are Vapor Corrosion Inhibitor (VCI) powders for corrosion protection 

of metals in recessed areas, interior cavities and voids. 

Features 

Does not contain Silicones, Nitrites or heavy metals. 

Protects up to 1.0 cubic foot (28 liters) per 0.3 ounces (8.4 grams) of powder. 

(300g/cubic meter) Provides up to 24 months of continuous protection. 

Provides mono-molecular inhibiting layer. 

VCI powders provide an extremely efficient dry method to protect metals within 

. . . . . . . . . . 

anenclosed space. The VCI vaporizes and then adsorbs on all metal surfaces, 

reaching every part of the metal surface, including recessed areas and interior 

cavities. 

Benefits 

Vapor-phase inhibiting action protects inaccessible and recessed surfaces. 

Protected products can be shipped to customers without removing powder. 

No regeneration required; effective for up to 24 months. 

If VCI layer is disturbed by moisture or opening the enclosed space, the layer is 

replenished by continuous vapor protection. 

Little or no surface preparation required. 

Prevents further corrosion of the pre-coated and painted surfaces. 

Easy to apply. 

VCI layer does not need to be removed prior to processing or use. 

Very easily removed by air gun or water when applied as a powder. 

VCI layer does not interfere with operation of mechanical components. 


VCI powders are used for dry protection of internal cavities and voids that can be 

covered or closed after application. 

Tubular structures, pipes and vessels. 

Internal surfaces of compressors, turbines, engines, 

tanks, boilers, heat exchangers. 

Dry lay-up of closed circuit cooling systems. 

Equipment protection after hydrostatic testing. 

Parts, components and completed assemblies during 

shipping and storage.

. 



 


Method of Application 

Apply powder by dusting, fogging or sprinkling. After application, 

simply cover, close or seal the interior cavity or void. 

Fogging is easily achieved with a low pressure air hose and 

sandblast cup. Large, conventional sandblasting systems can 

also be used. 

For powder application with average environmental conditions, 

use 0.3 ounces (8.4 grams) of VCI-POWDER 

per one cubic foot (28 liters) of enclosed space(300grams/cubic 

meter). The dosage can be increased for more severe conditions. 

Method of Removal 

VCI powder can be easily removed by using a low 

pressure air gun or by a water rinse. 


Carbon steels, Stainless steels, 

Exposure Limitations 

For use in interior cavities and voids that are covered, closed or 

sealed after application. Product can be stored indoors or out-doors. 


pH.............................6.5-7.7 

Form.........................Powder 

Appearance..............White powder 

Special labeling.........None 

Water Soluble ------ 100% 

All statements, technical information and recommendations contained herein are based on tests Grofit 

Plastics believes to be reliable, but the accuracy or completeness thereof is not guaranteed. Grofit Plastics 

warrants Grofit Plastics Products will be free from defects when shipped to customer. Grofit Plastics 


warranty shall be limited to replacement of product that proves to be defective. To obtain replacement 

product under this warranty, the customer must notify Grofit Plastics of the claimed defect within six 

months after shipment of product to customer. All freight charges for replacement products shall be paid 

by customer. Grofit Plastics shall have no liability for any injury, loss or damage arising out of the use of or 

the inability to use the products. 

BEFORE USING, USER SHALL DETERMINE THE SUITABILITY OF THE PRODUCT FOR ITS 

INTENDED USE, AND USER AS-SUMES ALL RISK AND LIABILITY WHATSOEVER IN CONNEC- 

TION 

THEREWITH. No representative or recommendation not con-tained herein shall have any 

force or effect unless in a written document signed by an officer of Grofit Plastics. THE 

FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, EXPRESS, 

IMPLIED OR STATU-TORY, 

INCLUDING WITHOUR LIMITATION ANY IMPLIED WARRANTY OF MERCHANTABILITY OR OF 

FITNESS FOR A PARTICULAR PURPOSE. IN NO CASE SHALL Grofit Plastics COR-PORATION BE 

LIABLE FOR INCIDENTAL OR CONSEQUEN-TIALDAMAGES. 

LIMITED WARRANTY 

2

. 








Tel: +34 977 713 562 cell: +34 647 466 251 



VCI POWDERS are Vapor Corrosion Inhibitor (VCI) powders for corrosion protection 

of metals in recessed areas, interior cavities and voids. 

Additional Features 

Protects up to 1.0 cubic foot (28 liters) per 0.3 ounces (8.4 grams) of powder. 

(300g/cubic meter) Provides up to 24 months of continuous protection. 

Provides mono-molecular inhibiting layer. 

VCI powders provide an extremely efficient dry method to protect metals within 

anenclosed space. The VCI vaporizes and then adsorbs on all metal surfaces, 

. . . . . . . . . . 

reaching every part of the metal surface, including recessed areas and interior 

cavities. 

Additional Benefits 

Vapor-phase inhibiting action protects inacces-sible and recessed surfaces. 

Protected products can be shipped to customers without removing powder. 

No regeneration required; effective for up to 24 months. 

If VCI layer is disturbed by moisture or opening the enclosed space, the layer is 

replenished by continuous vapor protection. 

Little or no surface preparation required. 

Prevents further corrosion of the pre-coated and painted surfaces. 

Easy to apply. 

VCI layer does not need to be removed prior to processing or use. 

Very easily removed by air gun or water when applied as a powder. 

VCI layer does not interfere with operation of mechani-cal components. 

Typical Application 

VCI powders are used for dry protection of internal cavities and voids that can be 

covered or closed after application. 

Additional Applications 

Tubular structures, pipes and vessels. 

Internal surfaces of compressors, turbines, engines, 

tanks, boilers, heat exchangers. 

Dry lay-up of closed circuit cooling systems. 

Equipment protection after hydrostatic testing. 

Parts, components and completed assemblies during 

shipping and storage.

. 



 


Method of Application 

Apply powder by dusting, fogging or sprinkling. After application, 

simply cover, close or seal the interior cavity or void. 

Fogging is easily achieved with a low pressure air hose and 

sandblast cup. Large, conventional sandblasting systems can 

also be used. 

For powder application with average environmental conditions, 

use 0.3 ounces (8.4 grams) of VCI-POWDER 

per one cubic foot (28 liters) of enclosed space(300grams/cubic 

meter). The dosage can be increased for more severe conditions. 

Method of Removal 

VCI powder can be easily removed by using a low 

pressure air gun or by a water rinse. 


Carbon steels, Stainless steels, Aluminum, Copper, Brass. 

Exposure Limitations 

For use in interior cavities and voids that are covered, closed or 

sealed after application. Product can be stored indoors or out-doors. 


pH.............................6.4-7.6 (1% aqueous solution) 

Form.........................Powder 

Appearance..............White powder 

Special labeling.........None 

All statements, technical information and recommendations contained herein are based on tests Grofit 

Plastics believes to be reliable, but the accuracy or completeness thereof is not guaranteed. Grofit Plastics 

warrants Grofit Plastics Products will be free from defects when shipped to customer. Grofit Plastics 


warranty shall be limited to replacement of product that proves to be defective. To obtain replacement 

product under this warranty, the customer must notify Grofit Plastics of the claimed defect within six 

months after shipment of product to customer. All freight charges for replacement products shall be paid 

by customer. Grofit Plastics shall have no liability for any injury, loss or damage arising out of the use of or 

the inability to use the products. 

BEFORE USING, USER SHALL DETERMINE THE SUITABILITY OF THE PRODUCT FOR ITS 

INTENDED USE, AND USER AS-SUMES ALL RISK AND LIABILITY WHATSOEVER IN CONNEC- 

TION 

THEREWITH. No representative or recommendation not con-tained herein shall have any 

force or effect unless in a written document signed by an officer of Grofit Plastics. THE 

FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, EXPRESS, 

IMPLIED OR STATU-TORY, 

INCLUDING WITHOUR LIMITATION ANY IMPLIED WARRANTY OF MERCHANTABILITY OR OF 

FITNESS FOR A PARTICULAR PURPOSE. IN NO CASE SHALL Grofit Plastics COR-PORATION BE 

LIABLE FOR INCIDENTAL OR CONSEQUEN-TIALDAMAGES. 

LIMITED WARRANTY 

2

. 


Liigalo de la Llioma s/n La Senia. 

Tel: 34 746 466251 

E-mail: info@vci2000.net 

Internet : http://www.vci2000.net 

Grofit Plastics, Israel 

*Limited Warranty Statement 

VCI-2000 

All statements, technical information and recommendations contained 

herein are based on tests Grofit Plastics believes to be reliable, but the 

accuracy or completeness thereof is not guaranteed. Grofit Plastics 

warrants its products to be free from defects when shipped to 

customer. Its obligation under this 

warranty shall be limited to replacement of product that proves to be 

defective. To obtain replacement product under this warranty, the 

customer must notify Grofit Plastics of the claimed defect within six 

months after shipment of product to customer. All freight charges for 

replacement of product shall be paid by the customer. Grofit Plastics 

shall have no liability for any injury, loss or damage arising out of the 

use of or the inappropriate use of its the products. 

BEFORE USING, USER SHALL DETERMINE THE SUITABILITY OF 

THE PRODUCT FOR ITS INTENDED USE, AND USER SHALL 

ASSUME ALL RISK AND LIABILITY WHATSOEVER IN 

CONNECTION THEREWITH. No representative or 

recommendation not contained herein shall have any force or 

effect unless in a written document signed by an officer of Grofit 

Plastics. THE FOREGOING WARRANTY IS EXCLUSIVE AND IN 

LIEU OF ALL OTHER WARRANTIES, EXPRESSED, IMPLIED OR 

STATUTORY, INCLUDING, WITHOUT LIMITATION, ANY IMPLIED 

WARRANTY OF MERCHANTABILITY OR OF FITNESS FOR A 

PARTICULAR PURPOSE. IN NO CASE SHALL GROFIT PLASTICS 

BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES.

Material Safety Data Sheets 

MSDS

Conforms to 91/155/EEC - 2001/58/EC - United Kingdom (UK) 

1. 

SAFETY DATA SHEET 

VCI 2000 Film/Bags 

Identification of the substance/preparation and of the 

company/undertaking 

Product name 

Use of the substance/preparation 

GROFIT PLASTICS 

M.P. EILOT 

88825 ISRAEL 

Tel. No.: +972-8-6357712 

Fax: +972-8-6357723 

Emergency telephone number +972-8-6357712 

Fax +972-8-6357723 

2. 

Substance/preparation Preparation 


Industrial applications: Polyethylene; Packaging film; Corrosion inhibitor. 

Composition/information on ingredients 

Chemical characterization Polyethylene ; Contains : corrosion inhibitor; Inorganic/ Organic. 

Within the present knowledge of the supplier, this product does not contain any hazardous ingredients in 

quantities requiring reporting in this section, in accordance with EU regulations or National regulations. 

3. 

Hazards identification 

The substance is not classified as dangerous according to Directive 67/548/EEC and its amendments. 

Classification 

This product is not classified according to the EU regulations. 

Note: See section 11 for more detailed information on health effects and symptoms. 

4. 

First aid measures 

Inhalation 

Ingestion 

Skin contact 

Eye contact 


Does not apply. When exposed to high temperatures may produce hazardous 

decomposition products such as carbon monoxide and dioxide, smoke, oxides of 

nitrogen etc.If inhaled, remove to fresh air. If breathing is difficult, give oxygen. If 

not breathing, give artificial respiration. Obtain medical attention. 

Do NOT induce vomiting unless directed to do so by medical personnel. Never 

give anything by mouth to an unconscious person. Loosen tight clothing such as 

a collar, tie, belt or waistband. 

Does not apply. 



5. 

Fire-fighting measures 

Extinguishing media 

Special exposure hazards 

SMALL FIRE: Use dry chemical or CO2. 

LARGE FIRE: Use water spray, fog or foam. 

No specific hazard. 

Hazardous thermal 

These products are carbon oxides (CO, CO2) and water. 

decomposition products 

Protection of fire-fighters Fire-fighters should wear self-contained positive pressure breathing apparatus 

(SCBA) and full turnout gear. 

Date of issue 29-6-2004. Page: 1/4

6. Accidental release measures 

Personal precautions 

Environmental precautions 

Methods for cleaning up 

Gloves. 


Use a shovel to put the material into a convenient waste disposal container. 

Not required. 

Note: see section 8 for personal protective equipment and section 13 for waste disposal. 

7. 

Handling 

Storage 

Handling and storage 

Packaging materials 

Recommended 

(when handling hot material): Do not breathe fumes/vapour. 

Keep in original packaging. Keep product in a cool, ventilated area. 

Keep away from food, drink and animal feeding stuffs. 

Use original container. 

8. Exposure controls/personal protection 

Exposure limit values 

Exposure controls 

Engineering measures 

Not available. 

Work in a ventilated work area. 

Hygiene measures 

Wash hands after handling compounds and before eating, smoking, using 

lavatory, and at the end of day. 

Eye protection 

N.R. 

Skin protection N.R. 

9. 

Physical and chemical properties 

Physical state 

Solid. 

Boiling point 


Melting point 

>106°C (223°F) 

Relative density 

0.92 g/cm 

Vapour pressure 

Solubility 

3 

Odour 

Ammoniacal. (Slight.) 

Flash point Not available. 

Explosion limits 


0.01 kPa (0.075 mm Hg) (at 20°C) 

Insoluble in cold water. 

10. 

Stability and reactivity 

Stability 

The product is stable. 

Conditions to avoid temperature; above : 300°C. 

Materials to avoid 

Hazardous decomposition 

products 

11. 

None. 

Toxicological information 

Potential acute health effects 

Skin contact Not available. 

Eye contact 


Sensitisation 



.No data available. 


Potential chronic health effects 

Carcinogenicity 

Mutagenicity 

Developmental and teratogenic 

effects 

Reproductive toxicity 

Over-exposure signs/symptoms 

Inhalation 

Ingestion 

Skin contact 

Eye contact 









Target organs Not available. 

Other adverse effects 


12. 

Ecological information 

Ecotoxicity data 

Acute toxicity Not available. 

13. 

Disposal considerations 

Methods of disposal 

European waste catalogue (EWC) 

Hazardous waste 

15 01 02 


Additional information 15 01 02 plastic packaging 

14. Transport information 

Land - road/railway 

UN number Not regulated. 

Proper shipping name - 

ADR/RID Class - 

Sea 

The generation of waste should be avoided or minimised wherever possible. 

Avoid dispersall in waterways,drains and sewers. 

Disposal of this product, solutions and any by-products should 

at all tim es com ply with the requirem ents of environm ental protection and waste 

disposal legislation and any regional local authority requirements. 

To present knowledge of the supplier, this product is not regarded as hazardous 

waste as defined by EU Directive 91/689/EC. 

Other information Remarks 

Not controlled under ADR (Europe). 



IMDG Class 


15. 

Regulatory information 

- 

Remarks 

Not controlled under IMDG. 

Product use Classification and labelling have been performed according to EU directives 

67/548/EEC, 1999/45/EC, including amendments and the intended use. 

- Industrial applications. 

EU Regulations 

Risk Phrases 



16. 

History 


Full text of R phrases referred to in sections 2 

and 3 - United Kingdom (UK) 

Full text of classifications referred to in 

sections 2 and 3 - United Kingdom (UK) 

Recommended use and 

restrictions 

Further information 

Key data sources 

Revision comments 


Not applicable. 


Date of printing 

14-7-2004. 

Date of issue 

29-6-2004. 

Date of previous issue 2-6-2004. 

Version 

3.21 

VCI2000 name and logo are trademarks of Grofit Plastics. 

Notice to reader 

To the best of our knowledge, the information contained herein is accurate. However, neither the above named supplier 

nor any of its subsidiaries assumes any liability whatsoever for the accuracy or completeness of the information 

contained herein. 

Final determination of suitability of any material is the sole responsibility of the user. All materials may present unknown 

hazards and should be used with caution. Although certain hazards are described herein, we cannot guarantee that 

these are the only hazards that exist. 

Date of issue 

29-6-2004. 





Version 3.21 

Page: 4/4


1. 


VCI 2000 Paper 



Product name 


GROFIT PLASTICS 

M.P. EILOT 

88825 ISRAEL 

Tel. No.: +972-8-6357712 

Fax: +972-8-6357723 

Emergency telephone number +972-8-6357712 

Fax +972-8-6357723 

2. 



Industrial applications: Polyethylene; Packaging film; Corrosion inhibitor. 


Chemical characterization Paper ; Contains : corrosion inhibitor; Inorganic/ Organic. 



3. 






4. 


Inhalation 

Ingestion 

Skin contact 

Eye contact 


Does not apply. When exposed to high temperatures may produce hazardous 










5. 

















Gloves. 


Use a shovel to put the material into a convenient waste disposal container. 

Not required. 


7. 

Handling 

Storage 



Recommended 


Keep in original packaging. Keep product in a cool, ventilated area. 








Work in a ventilated work area. 





N.R. 

Skin protection N.R. 

9. 



Solid. 

Boiling point 


Melting point 



0.92 g/cm 


Solubility 

3 

Odour 





0.01 kPa (0.075 mm Hg) (at 20°C) 


10. 


Stability 


Conditions to avoid tem perature; above : 200°C. 



products 

11. 

None. 




Eye contact 


Sensitisation 







Mutagenicity 


effects 



Inhalation 

Ingestion 

Skin contact 

Eye contact 












12. 




13. 





15 01 02 


Additional information 15 01 02 plastic packaging 






Sea 


Avoid dispersall in waterways,drains and sewers. 

Disposal of this product, solutions and any by-products should 

at all tim es com ply with the requirem ents of environm ental protection and waste 








IMDG Class 


15. 


- 

Remarks 






Risk Phrases 



16. 

History 







restrictions 








14-12-05. 

Date of issue 

14-12-05. 

Date of previous issue 14-12-05. 

Version 

3.21 

VCI2000 name and logo are trademarks of Grofit Plastics. 








Date of issue 

14-12-05. 





Version 3.21 

Page: 4/4


1. 


VCI2000 disc Emitter. 



Product name; VCI2000 disc Emitter. 

Industrial applications: Voalthile Corrosion inhibitor for use in closed space. 



M.P Eilot 

Eilot 

88825 Israel 

Tel. No.: +972-8-6357712 

Fax: +972-8-6357723 

Emergency telephone number +972-8-6357712 (Day only) 

Fax +972-8-6357723 

2. 



Chemical characterization Absorbant carrier impregnated with corrosion inhibitor; Inorganic/ Organic. 



3. 






4. 


Inhalation 

Ingestion 

Skin contact 

Eye contact 


Avoid inhelation of dust. W hen exposed to high tem peratures m ay produce hazardous 







Wash with soap and water. 

wash with runing water, if eyes are irritated seek medical advice. 


5. 


















Gloves. 

Use a shovel to put the m aterial into a convenient waste disposal container. 

usss 

Use a shovel to put the matrial into a containet . 


7. 

Handling 

Storage 



Recommended 


Keep container tightly closed. Keep container in a cool, well-ventilated area. 








Use process enclosures, local exhaust ventilation, or other engineering controls to 

keep airborne levels below recommended exposure limits. If user operations 

generate dust, fume or mist, use ventilation to keep exposure to airborne 

contaminants below the exposure limit. 





Safety glasses. 

Skin protection Lab coat. 

9. 



Odour 

Boiling point 

Melting point 


Solid. 



>140°C 

3 1.1 g/cm 





0.01 kPa (0.075 mm Hg) (at 20°C) 

Solubility 


10. 


Stability 





products 

11. 




Eye contact 


Sensitisation 


Reactive with oxidising agents. 






Mutagenicity 


effects 



Inhalation 

Ingestion 

Skin contact 

Eye contact 













12. 




13. 






Avoid dispersal of spilled material and runoff and contact with soil, waterways, 

drains and sewers. Disposal of this product, solutions and any by-products should 

at all times comply with the requirements of environmental protection and waste 


15 01 02 

Additional information 15 01 02 plastic additive 






Sea 







IMDG Class 


15. 


- 

Remarks 






Risk Phrases 



16. 

History 







restrictions 





Date of issue 

Date of previous issue 

Version 




22-11-2005. 

22-11-2005. 

3.22 








Date of issue 

22-11-2005. 





Version 3.22 

Page: 4/4


1. 


VCI2000 Emitter ESD safe. 



Product name; VCI2000 plastic additive 

Industrial applications: Voalthile Corrosion inhibitor for use in closed space. 



M.P Eilot 

Eilot 

88825 Israel 

Tel. No.: +972-8-6357712 

Fax: +972-8-6357723 

Emergency telephone number +972-8-6357712 (Day only) 

Fax +972-8-6357723 

2. 



Chemical characterization Polyethylene ; Contains : corrosion inhibitor; Inorganic/ Organic. 



3. 






4. 


Inhalation 

Ingestion 

Skin contact 

Eye contact 


Avoid inhelation of dust. W hen exposed to high tem peratures m ay produce hazardous 







Wash with soap and water. 

wash with runing water, if eyes are irritated seek medical advice. 


5. 


















Gloves. 

Use a shovel to put the m aterial into a convenient waste disposal container. 

usss 

Use a shovel to put the matrial into a containet . 


7. 

Handling 

Storage 



Recommended 


Keep container tightly closed. Keep container in a cool, well-ventilated area. 








Use process enclosures, local exhaust ventilation, or other engineering controls to 

keep airborne levels below recommended exposure limits. If user operations 

generate dust, fume or mist, use ventilation to keep exposure to airborne 

contaminants below the exposure limit. 





Safety glasses. 

Skin protection Lab coat. 

9. 



Solid. 

Boiling point 


Melting point 

>106°C (223°F) 


0.92 g/cm 


Solubility 

3 

Odour 





0.01 kPa (0.075 mm Hg) (at 20°C) 


10. 


Stability 





products 

11. 




Eye contact 


Sensitisation 


Reactive with oxidising agents. 






Mutagenicity 


effects 



Inhalation 

Ingestion 

Skin contact 

Eye contact 













12. 




13. 






Avoid dispersal of spilled material and runoff and contact with soil, waterways, 

drains and sewers. Disposal of this product, solutions and any by-products should 

at all times comply with the requirements of environmental protection and waste 


15 01 02 

Additional information 15 01 02 plastic additive 






Sea 







IMDG Class 


15. 


- 

Remarks 






Risk Phrases 



16. 

History 







restrictions 





Date of issue 

Date of previous issue 

Version 




27-10-2005. 

27-10-2005. 

3.22 








Date of issue 

27-10-2005. 





Version 3.22 

Page: 4/4

Data Sheets And Application catalog - inpack GbR VCI packaging

Create successful ePaper yourself

Delete template?

Save as template?