NIR Lab EN - Adphos

adphos NIR-Lab
The NIR-test equipment for your laboratory
Description:
The NIR-Lab was developed for
• Manufactures of lacquer and raw materials,
• R & D-Laboratories,
• Test Laboratories and
• Application Centers,
which have the need to adapt their products to
the NIR-technology or need a NIR-radiation
source for the develpment.
Performance data for NIR-Lab (Basic system)
• Test samples or flat samples with dimensions
of max. 100 mm x 230 mm.
• Active area: NIR-Emitter 250 mm x 120 mm.
• NIR-Emission: 200 kW/m 2 , 400 kW/m² or 800
kW/m² (depending on the used emitter type).
• Distance variation between NIR-module and
sample up to 300 mm.
• Integrated contact-free temperature measurement
during NIR-treatment.
• Continuous adjustable temperature profiles
with power control or closed loop temperature
control, digital controller with numerical
display.
• Adjustable IR-wavelength emission from near
infrared to long wave IR.
adphos
innovations in thermal processing
System Configuration:
The NIR-Lab system consists of a 1 high performance
heater module of 250 mm x 120 mm
with six normal burn (200 kW/m 2 ), high burn (400
kW/m 2 ) or super burn NIR-Emitters (800 kW/m 2 ).
The test samples can be positioned under a variable
distance to the heater module for the NIRtreatment.
A special glass containment shields
the NIR-module from impurities. The complete
aluminium module body is water cooled.
The focussed, NIR-Emission allows a defined,
very short and smooth drying or melting and
curing treatment of coatings. With the given arrangement
of the NIR-Emitters and the reflector
systems, a homogenous, efficient and very economical
drying/curing treatment of areas on
temperature sensitive substrates can be ensured.
The contactless temperature measurement
allows a controlled and reproducible processing.
The electrical power supply of the NIR-Lab system
as well as the separated operator panel with
the control and monitoring unit are made according
to the VDE regulations.
The complete system is inherent safety controlled.
System errors, status conditions and the
process data are monitored. The NIR-Lab system
is ready for operation within seconds, as
well as can be shut off within seconds. The NIR-
Lab is CE approved.

Optionen und Zubehör (AdPhos rot, Arial 16 fett)
Dimensioning: NIR-Lab: L x W x H: 600 mm x 300 mm x 800 mm
Operator panel: L x W x H: 400 mm x 300 mm x 250 mm
Power supply: L x W x H: 600 mm x 650 mm x 200 mm
Supply Data: Cooling water: 2 x ½”, approx. 5 l/min
(10 l/min for super-burn equipment) with ∆p = 2.5 bar
Inlet temperature: approx. 20 °C (above dew point temperature)
Compressed air: ½”, 6 bar
Electrical infrastructure:
8 kW for normal-burn configuration (32 A CEE, 400 V)
15 kW for high-burn configuration (32 A CEE, 400 V)
30 kW for super-burn configuration (63 A CEE, 400 V)
Our NIR-Lab system ensures easy operation for the drying or curing
of wet or powder coatings as well as of thermal curing coatings
systems like adhesives, glues, enamel, thermal surface treatment,
flashing or scorching. The NIR-Lab system allows you to adapt your
coating systems to the NIR-technology as well as develop new application
and drying/curing processes easily.
1. Higher Power NIR-Emitter:
400 kW/m 2 (high-burn Emitter)
800 kW/m 2 (super-burn Emitter)
2. Contactless precision temperature measurement system with target laser-point in order to indicate the
measuring point on the sample.
3. a. Controller with graphical display for visualisation of system parameters and integrated RS 422 Inter face.
b. Programmable and remote controlled (up to 10) temperature or power profile ramps.
c. Programmable and remote controlled (up to 6) PID controlled parameter set.
4. RS 422 Interface transformer to RS 232 Interface for data transfer to a PC.
5.
6.
Technical Data:
NIR-Lab – covered system configuration
System Options:
Menu driven visualisation and data transfer software for installation on a PC (data transfer with windowsprograms
possible).
Covered NIR-Lab system configuration consisting of closed body, central door, viewing window, integrated
water cooling and defined steam exhaust.
All here mentioned data are subject to changes due to product optimisation
PDB NIR-Lab-01en-04/2009
adphos I Innovative Technologies GmbH, Bruckmühler Str. 27, D-83052 Bruckmühl,
Tel: +49 8061 395 0, Fax: +49 8061 395 395, info@adphos.de
Depandancen: UK, USA, Japan, Korea, Thailand
www.adphos.de