FSE Fitting and Squaring Machine - EH Wachs
FSE Fitting and Squaring Machine - EH Wachs
FSE Fitting and Squaring Machine - EH Wachs
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
SECTION VIII <strong>FSE</strong> TROUBLE SHOOTING<br />
Trouble Possible Cause Remedy<br />
<strong>Machine</strong> Won't Run ..................... Power Unit Not Connected .............................. Check Power Cord & Connection<br />
Work Piece Shifts Under ............ Loose Shoe Clamp ........................................... Check Tension on Shoe Clamp H<strong>and</strong>le<br />
Cutting Load.<br />
Poor Workpiece End Quality ......... Dull or Chipped Tool Bit .................................... Replace Tool Bit.<br />
<strong>Machine</strong> Chatters During Cut ....... RPM Speed of Tool Head ................................. Refer to Section on Machining Tips.<br />
is Set Too Fast or Feed Rate<br />
is Too Light.<br />
Chip Runs Up Workpiece I.D. ....... Improper Tool Bit Installation ............................. Refer to Tool Bit Installation Proceedure<br />
( Section 5).<br />
12.