femtoREGEN™ SCIENCE - High Q Laser

femtoREGEN™ SCIENCE
All-in-one femtosecond regenerative amplifier system
femtoREGEN™
Think Ultrafast!
SC-1035-1000 HE SC-1035-1000 HEHR SC-1055-100 SC-1055-200
Wavelength 2) 1035 +/- 5 nm 1035 +/- 5 nm 1055 +/- 5 nm 1055 nm +/- 5 nm
Pulse width (FWHM), typical 3) 500 fs 350 fs 650 fs 650 fs
Average output power 1 W 1 W 100 mW 200 mW
Pulse repetition rate 4) 1 kHz 1 - 100 kHz 10 Hz - 1 kHz 1 - 40 kHz
Pulse energy max 1 mJ @ 1 kHz 0.4 mJ @ 1 kHz 1 mJ @ 10 Hz 5 µJ @ 40 kHz
Laser material 1) Ytterbium Nd:Glass
Power stability, typical < 1 % RMS (12h)
Beam quality TEM00; M 2 ≤ 1.2
Polarization horizontal / vertical (TBD)
Power supply 90 VAC - 240 VAC, 50/60 Hz, < 500 W
Laser head size 902 or 1102 x 502 x 166 mm 3 (l x w x h)
Beam height (IC-Laser 5) ) 101.6 mm (4”), nominal
Controller size 600 x 590 x 550 mm 3 (l x w x h), 19“ rack
Chiller 400 x 200 x 557 mm 3 (l x w x h), 115 VAC or 230 VAC 50/60 Hz, < 2000 W (incl. heater)
Operation ambient temp. 18 °C to 30 °C
All specifications are typical data and subject to change without notice in order to provide the best product possible.
1) different laser materials on request
2) other wavelengths on request
3) +/- 10%, shorter pulse widths down to 250 fs on request
4) pulse repetition rates up to 500 kHz on request
5) ask for customized system packaging
femtoREGEN TM
Main Features Customer benefits
• All-diode-pumped solid state technology • Compact and modular setup
• Saturable absorber modelocking (SESAM) • High temporal and spatial stability
• TEM 00 beam profile • USB bus remote control, CAN bus (optional)
• Modules-in-the-box: Sealed-off setup of seed laser and amplifier • Passive self starting modelocking
• Air-cooled closed-loop chiller (included) • Synchronised IR, Green and UV pulses (optional)
• Integrated femtoTRAIN™ seed laser • Service friendly modular setup
• Single phase power supply • Multiple beam exit for simultaneous access to all wavelengths (opt.)
®

251
Typical Intensity Autocorrelation
Autocorr. duration 535 fs
Pulse duration 348 fs
Typical IR beam profile of
femtoREGEN Yb
191,40
126,20
Applications
31
251
471
• Femtosecond laser dissection
• Laser ablation
• Pulsed laser deposition
• OPA pumping
• Femtosecond spectroscopy
• Nonlinear optics
• Nano processing
• Waveguide writing
• Biological tissue ablation and machining
• High-energy physics
High Q Laser Production GmbH
Kaiser-Franz-Josef-Strasse 61
A-6845 Hohenems | Bregenz
Austria
Long Term Power Stability
Measurement duration 50h
Mean 2.15 W | RMS 0.36 %
Typical Beam Quality
M 2 X 1.06, M 2 Y 1.08
Ellipticity 1.02
Please Inquire About
• OPA: Tunable output from 200 nm - 3000 nm
• Frequency conversion (SHG, THG, FHG, OPA)
• Optical pulse picker
• Picosecond laser systems
• Applications laboratory for sample testing
• OEM and customized versions
Telefon +43-5576-43040
Telefax +43-5576-43050
sales@highQlaser.at
www.highQlaser.at
902
High Q Laser (US) INC.
118 Waltham Street
Watertown, MA 02472
USA
Pulse Energy (µJ)
600,0
500,0
400,0
300,0
200,0
100,0
Think Ultrafast!
0,0
0,0
0,00 20,00 40,00 60,00 80,00 100,00
Repetition Rate (kHz)
®
Phone (617) 924 1441
Fax (617) 924 5554
sales@HighQ-US.com
www.HighQ-US.com
1200,0
1000,0
Typical relation of power and pulse
energy versus repetition rate
Pulse energy 513 µJ @ 1 kHz
Power 1090 mW @ 100 kHz
Typical Beam Pointing over 1 h Time
FL=400 mm,reprate 100 kHz
Mean < 20 µrad, RMS < 5 µrad
800,0
600,0
400,0
200,0
Power [mW]
502
All specifications are typical data and subject to change without notice in order to provide the best product possible. © 03 2008
Rev DATUM All rights and copyrights for this documents kept by High Q Laser GmbH
Art. Nr.: 02391 Description: BG Reg-Ver Housing RA90, V1.0, EXT ASS
Druckdatum: 11.06.2007 Format A0 Blatt 1 von 1