MSC Microsealedconnector

MSC MicroSealedConnector
Robust and up to every tough
condition

Connector Family MSC
Hirschmann Automotive meets the requirements
of the automotive manufacturers for smallest
possible designs and technical highly ambitious
electrical connectors with the MSC-family.
The MSC-family – MicroSealedConnector –
is a standard product. Therefore the designing
period for new cavities and their tool-related
realization is slashed. Due to the miniaturized
shape and its robustness the range of applications
of the connectors is extremely versatile
and their usage is diversified.
- miniaturized shape
- vibration-resistant design
- mechanically robust due to overmolding
technology
- no protective covers against environmental
influence necessary
- strain relief
- waterproof
Hirschmann Automotive GmbH
Oberer Paspelsweg 6-8
A-6830 Rankweil
Phone +43(0)5522-307-0
Fax +43(0)5522-307-554
info@hirschmann-automotive.com
www.hirschmann-automotive.com
Technical features
- designed for:
body/engine compartment
- operation temperature:
-40°C until +130°C depending
on wire material and
application
Electrical features
- 1,2mm contact system
- contact finish
- tin, silver, gold
- max. current load (maximum
values of the contact system)
- derating 20/80°C
surface Ag, Au 19/16A
- derating 20/80°C
surface Sn 17/14A
Depending on the OEM higher
currents are approved. Maximum
allowable currents have to be
assessed in combination with the
used wire cross-section.
Single-row product family MSC 1,2mm / 2-pin until 6-pin-design
cavities X Y Z socket housing pin housing
2 11,0 8,5 28,0 805-183-… 805-184-…
3 13,5 8,5 28,0 805-185-…
4 16,0 8,5 28,0 805-187-… 805-188-…
6 21,5 9,0 28,0 805-191-…
Double-row product family MSC 1,2mm
cavities X Y Z socket housing pin housing
10 21,5 13,5 33,0 805-396-… 805-397-…
Optional products on request
single-row double-row
Minimal retention force of the
coupling in the plug base
- force-locked
connectors > 50N
Applicable wires
wire cross-section
0,22mm² until 0,75mm²
wire material is selected
according to requirements
cavities X Y Z cavities X Y Z
5 19,0 9,0 28,0 4 13,5 13,0 53,0
6 16,0 13,0 53,0
8 18,5 13,0 53,0
12 24,5 13,5 53,0
14 27,0 13,5 53,0
16 30,0 13,5 53,0
18 32,5 13,5 53,0
20 35,0 13,5 53,0
Tests according to Test Guideline
for Automotive Connectors
PG 7 retention force and
reliability of housings
PG 17A dynamic testing
PG 19 environmental simulations
PG 20A climatic testing
of housings
PG 21A long-run temperature
storage
PG 22B resistance to chemicals,
extended testing
PG 23 watertightness
Z
Z
X
X
Y
Y