18 - Microglue

NO MINIMUM ORDER 

Order only what you need. 

ORDERING OF PARTS 

Check Out Our 

Monthly Specials at 

-\N\N\N.baum1oWeixom 

Baumfolder offers customers a number of ways to order parts and/or communicate vvith the 

Baumfolder factory Parts Department. Regardless of the method you choose, you vvill receive the 

personalized attention of an experienced Baumfolder Parts Analyst. 

. Toll Free Phone 800/543-6107 

(Intl. Customers 937/492-1281) 

E-mail: parts@baumfolder.com 

• Toll free Fax 800/452-0947 

(Intl. Customers 937/497-8301) 

Mail: 

Baumfolder Corporation 

1660 Campbell Road 

P.O. Box 728 

Sidney, OH 45365 

TABLE OF CONTENTS 

Perforator Blades 4 

Slitting & Scoring Blades 5 

Blade Holders / Collars 6 

Strippers & Guide Shoes 7 

Baum 26" & 30" Slitter Shaft Blades 8 

Gears 10 

Variable Speed Pulleys 11 

Drive Belts 11 

Marbles 11 

Pump Filtcrs & Vanes 12 

714 Parts 13 

Fold Rolls, General Information 14 

Fold Rolls, Combo 15 

Fold Rolls, Rubber 15 

Roll Recovery 16 

Folder Tires 17 

Tune-up Kits 18 

RebuildKits 20 

Folder Tools & Gages 22 

"Operating Baumfolders" (Book) 22 

Register Tapes, Stacker Belts 23 

Drill Bits & Drill Blocks 24 

Drill Accessories 25 

Mise. Parts 26 

Total Counters 27 

Batch Counters 28 

Gatefold Attachments 29 

714 Perf-Score Attachment 30 

Floor Model Score Attachment 31 

Micro-Perf Attachment, Knock-out Perf... 32 

Baum Wet Score Attachment 33 

Static Eliminators 34 

714 Accessories 35 

2020 Accessories 36 

Preventative Maintenance 37 

History 38 

Master Card, Visa, or American Express can be used to purchase 

parts and accessories from the Baumfolder Parts Department. 

Specifications and availability of'items in this catalog are subject to change without notice 

2008 Baumfolder 

TO ORDER or for INFORMATION 

CALL: 800-543-6107 FAX: 800-452-0947 

email: parts@baumfolder.com vvvvw.baumfolder.com BAUMFOLDER

06605 

44706 

55777 

16196 

ro° BAUMFOLDER< 

SOLID PERFORATOR BLADES 

PART# DESCRIPTION SHAFT TPI REMARKS 

07618 6 Tooth Perforator 7/8" 1 

06605 12 Tooth Perforator 7/8" 2 

07895 15 Tooth Perforator 7/8" 2.5 

07896 18 Tooth Perforator 7/8" 3 

29629 20 Tooth Perforator 7/8" 3.5 


06798 31 Tooth Perforator 7/8' 5 

07791 41 Tooth Perforator 7/8" 7 .060 

10164 41 Tooth Perforator 7/8" 7 .035 


260-328-01-00 98 Tooth Perforator 7/8" 17 



10361 7 Tooth Perforator 1 1/8" 1 

44706 12 Tooth Perforator 1 1/8" 1.7 





SPLIT PERFORATOR BLADES 


52087 7 Tooth Perforator-split 1 1/8" 1 

55776 12 Tooth Perforator-split 1 1/8" 1.7 

51940 15 Tooth Perforator-split 11/8" 2 Straight 

55777 15 Tooth Perforator-split 1 1/8" 2 Angular 



KNOCK OUT PERFORATOR BLADES 


16196 15 TKnockout Perforator 1 1/8" 2 

91593 12 T Knockout Perforator 7/8" 1.7 

MICRO PERF BLADES 


FK0000386 Knife 1 1/8" 72 

FK0000387 Lower anvil 1 1/8" 

263-889-01-00 Knife 7/8" 72 

268-320-0Í-00 Lower anvil 7/8" 


kCALL: 800-543-6107 FAX: 800-452-0947 

email: parts@baumfolder.com www.baumfolder.com BAUMFOLDER

06378 

93209 

06379 

SLITTING & SCORING BLADES 

10353 

SLITTER BLADES 

PART# DESCRIPTION SHAFT 

06378 3/32" Thick Countersunk Bevel Side 7/8" 

06804 3/32" Thick Countersunk Fiat Side 7/8" 

15240 .062" Thick Countersunk Bevel Side 7/8" 

15241 .062" Thick Countersunk Fiat Side 7/8" 

15573 Hollow Ground Countersunk Fiat Side 7/8" 

15574 Hollow Ground Countersunk Bevel Side 7/8" 


10348 With Key Way (Replaced by 93209) 1-1/8" 

93209 With Three Countersunk Holes 1-1/8" 

51943 Split Slitter 1-1/8" 

SCORE BLADES 


06379 LightScore .060 7/8" 

06380 Heavy Score .125 7/8" 

263-852-01-00 


10352 #1 Score 1-1/8" 

10353 #2 Score 1-1/8" 

51947 Split Score 1-1/8" 


CALL: 800-543-6107 FAX: 800-452-0947 

email: parts@baumfolder.com vvvvvv.baumfolder.com BAUMFOLDER

BLADE HOLDERS 

06411 06413 5 2 0 9 2 S52Q83 9 3 3 2 9 

PART# DESCRIPTION SHAFT REMARKS 

06411 Collar-Blade Holder 7/8" 5/8" Wide 

264-089-01-00 Collar-Blade Holder 7/8" 06411 w/metric ss 

06413 Collar-Blade Holder 7/8" 1" Wide 

52092 Assy-Blade Holder 7/8" Screw Collar 

10688 Assy-Blade Holder 1-1/8" Screw Collar 

S52083 Assy-Blade Holder 1-1/8" Screw Collar 

91483 Hub-Blade Holder(Special) 1-1/8" Snap Ring 

93329 Collar-Blade Holder 1-1/8" Three Screw 

PERF, SCORE & TIRE COLLARS 

06799 06997 ^ ^ 0^780 1 0 3 4 6 1 Q 3 5 1 

10360 51948 ^ ^ ^ 5 1 9 8 7 

PART# DESCRIPTION SHAFT REMARKS 

06799 Collar-Female Perf 7/8" 

264-084-01-00 Collar-Female Perf 7/8" 06799 w/metric ss 

06997 Sleeve-Sheet Pullout 7/8" 

07780 Collar-Score 7/8" 

264-086-01-00 Collar-Score 7/8" 07780 w/metric ss 

10346 Sleeve-Sheet Pullout 1-1/8" 

10351 Collar-Scoring Rubber 1-1/8" 

10360 Collar-Perforator 1-1/8" 

16194 Collar-Knockout Perf 1-1/8" 

51948 Head-Scoring Lower 1-1/8" 

51987 Head-Scoring Lower 7/8" 

91594 Collar-Knockout Perf 7/8" 

51917 Collar-Score, Rubber/Steel 1-1/8" 


CALL: 800-543-6107 FAX: 800-452-0947 -email: 

parts@baumfolder.com www.baumfolder.com BAUMFOLDER

STRIPPERS & GUIDE SHOES 

CENTER STRIPPERS 

PART# DESCRIPTION REMARKS 

13328 Stripper-Center, 1/4" wide Assy# 15700 

13329 Stripper-Center, 1/8" wide Assy# 15701 

28613 Stripper-Center, Brass 1/4" 7/8" Shaft 

28614 Stripper-Center, Brass 1/8" 7/8" Shaft 

51828 Stripper-Center, 1/8" wide Assy#51377 

92447 Stripper-Center, Brass 1/4" 1-1/8" Shaft 

92448 Stripper-Center, Brass 1/8" 1-1/8" Shaft 

EDGE STRIPPERS 


06434 Stripper-Outside RH Assy# 15627 

06435 Stripper-Outside LH Assy# 15628 

16437 Stripper-Outside RH Assy #16721 

16438 Stripper-Outside LH Assy# 16722 

PERF STRIPPERS 


06438 Stripper-Slotted Assy# 15624 

29255 Stripper-Slotted Assy#19708 

45208 Stripper-Slotted (714) Assy # 45297 

GUIDE SHOES & STACKER HOLD DOWN 


06439 Clamp 

06443 Spring Stacker Hold Down Assy #15623 

38973 Guide Shoe Assy #S15694 

42662 Guide Shoe Assy # S42860 

HARDWARE 

PART# DESCRIPTION 

07728 Screw-Slitting Blade 

20312 Screw-Filstr 10-24x3/8 

20438 Screw-Set Brass Tip 

20535 Screw-Th u m b 


CALL: 800-543-6107 FAX: 800-452-0947 

email: parts@baumfolder.com wvvvv.baumfolder.com BAUMFOLDER

BAUM 26" AND BAUM 30" FOLDERS 

Blades for 35mm Slitter Shafts 

Note: All Blades on page 8 and 9 have an ID of 40mm 

PERFORATOR BLADES—M1 Knife Shape 

CUTTING SLIT CONNECTOR 

PART# # TEETH OD THICKNESS ANGLE LENGTH LENGTH REMARKS 

200-769-02-00 S 61.5 mm 0.5 mm 20° 32 6 

200-756-07-00 6 61.5 mm 0.5 mm 30° 29 3 

200-756-08-00 61.5 mm 0.5 mm 30° 21 3 

200-756-13-00 10 61.5 mm 0.5 mm 30° 17 2 

200-756-09-00 15 61.5 mm 0.5 mm 30° 8 3 

200-756-01-00 18 61.5 mm 0.5 mm 30° 4 7 

210-621-01-00 28 61.5 mm 0.5 mm 30° 3 3 i 

200-749-01-00 12 62 mm 0.5 mm 20° 13 3 

205-978-01-00 12 62 mm 0.5 mm 20° 13 3 

200-769-01-00 15 62 mm 0.5 mm 20° 7 6 

200-749-02-00 18 62 mm 0.5 mm 20° 7 4 Parallel 

205-978-02-00 18 62 mm 0.5 mm 20° 8 3 Right-angle 

200-769-01-00 15 62 mm 0.5 mm 20° 7 6 

200-749-02-00 18 62 mm 0.5 mm 20° 7 4 

205-978-02-00 18 62 mm 0.5 mm 20° 8 3 

200-754-06-00 60 59 mm 0.5 mm 20° 2 1 

200-754-03-00 80 59 mm 0.5 mm 20° 

200-754-01-00 80 59.5 mm 0.5 mm 20° 1 1 

200-754-02-00 80 59.7 mm 0.5 mm 20° 1 

200-756-12-00 36 59.7 mm 0.5 mm 30° 3 2 

200-754-08-00 60 60 mm 0.5 mm 20° Ni 

200-754-04-00 80 60 mm 0.5 mm 20° 2 

200-756-11-00 60 61 mm 0.5 mm 30° MHHB 

200-754-05-00 60 61.5 mm 0.5 mm 20° 2 

200-754-07-00 90 61.5 mm 0.5 mm 20° 1 1 

200-756-01-00 30 61.5 mm 0.5 mm 30° 4 2 

200-756-02-00 32 61.5 mm 0.5 mm 30° 2 4 

200-756-03-00 36 61.5 mm 0.5 mm 30° 3 2 

200-756-04-00 45 61.5 mm 0.5 mm 30° 4 SHHBSSI 

200-756-05-00 48 61.5 mm 0.5 mm 30° 2 2 

200-756-06-00 60 61.5 mm 0.5 mm 30° 2 MNHHHB 

200-749-03-00 40 62 mm 0.5 mm 20° 2 3 

226-350-01-00 12 61.5 mm 1 mm 30° 11 5 

226-350-03-00 12 61.5 mm 1 mm 30° 11 6 

226-350-02-00 18 61.5 mm 1 mm 30° 6 5 


226-401-01-00 12 61.5 mm 2 mm 30° 11 5 

226-401-03-00 12 62 mm 2 mm 30° 11 5 



/^•'^"'XV TO ORDFR or for INFORMATION 

#^BAUMFOLDER'*>% c a l l. 800-543-6107 FAX: 800-452-0947 ^ m 

8 V A "k M A? M email: parlsfirbauniioldcr.com www. baumfolder.com BAUMFOLDER

PART# # TEETH 

BAUM 26" AND BAUM 30" FOLDERS 

Blades for 35mm Slitter Shafts 

Note: All Blades on page 8 and 9 have an ID of 40 mm 

PERFORATOR BLADES - M2 Knife Shape 

CUTTING SLIT CONNECTOR 

OD THICKNESS ANGLE LENGTH LENGTH REMARKS 

224-773-02-00 12 61.5 mm 2 mm 40° 11 5 

224-773-01-00 15 61.5 mm 2 mm 


PART# #TEETH 

PUNCH PERFORATOR BLADES - M3 Knife Shape 

SLIT CONNECTOR 

OD THICKNESS LENGTH LENGTH REMARKS 

213-027-01-00 12 64 mm 0.9 mm 12 5 

213-028-01-00 12 64 mm 1.2 mm 12 5 

CREASING (SCORING) BLADES - M4 Knife Shape 

PART# OD THICKNESS REMARKS 

200-742-12-00 59 mm 0.8 mm 

200-742-09-00 59.5 mm 0.8 mm 

200-742-06-00 60 mm 0.8 mm Heavy score good for 16-pg or 32-pg signature 

200-742-05-00 61 mm 0.8 mm 

200-753-01-00 60.5 mm 2 mm Wide score for maps or 32-pq siqnature 

TRIMMING (SLITTING) BLADES - M1 Knife Shape 

PART# OD THICKNESS CUTTING ANGLE REMARKS 

200-747-04-00 60 mm 0.5 mm 30° Light-weight stock or single sheet 

200-747-03-00 61.5 mm 0.5 mm 30° 

200-747-06-00 62.5 mm 0.5 mm 9HBHBBHHHBHI 

200-747-05-00 63.5 mm 0.5 mm 30° For slitting very heavy stock 

205-970-01-00 61 mm 2 mm 30° Heavy duty slitter for knife-to-knife slitting 

226-341-03-00 61.5 mm 1 mm 30° 

226-341-02-00 61.5 mm 1 mm 30° 

205-972-03-00 64 mm 0.5 mm 45° 

205-970-03-00 69 mm 2 mm 45° 

205-972-03-00 64 mm 2 mm 30° 

For more information, or to get a copy of our Slitter Shaft Accessories Guide, contact the 

Baumfolder Parts Department and one of our experienced Parts Analysts will assist you. 

The guide offers information on how to select a blade and examples for setting up jobs 

such as Punch-Perforating, Edge Trimming and Scoring, just to ñame a few. 

TO ORDER or for INFORMATION ^*f- 

CALL: 800-543-6107 FAX: 800-452-0947 

email: parts@baumfolder.com wwvv.baumfolder.com BAUMFOLDER

S54251-003 

06464 

11607 

12321 

¡. Repiacea,, 

Fe? BAUMFOLDER % 

GEARS 

ROLL GEAR-SPUR 


06077 Gear-Spur21T Roll MKII, MKIII, 200, 600,700 

09544 Gear-Spur 18T Roll 500 Series, Futura 

09544-S Gear-Spur 18T Roll MKI, 400, O&M 

06318 Gear-Spur 36T Idler MKII 

06338 Gear-Spur, Pinion 5T Gear Driven Stackers 

ROLL GEAR-HELICAL 


52677 Gear-Helical 13T RH Roll Liberty Series 

52678 Gear-Helical 13TLH Roll Liberty Series 

52875 Gear-Helical 13TRH Roll Liberty Series 

S54251-001 Assy-Gear, Helical 18T Legend 20 & 23 

S54251-002 Assy-Gear, Helical 18T Legend 20 & 23 

S54251-003 Assy-Gear, Helical 21T Legend 20 & 23 

S54251-004 Assy-Gear, Helical 21T Legend 20 & 23 

55127-001 Assy-Gear Drive, Hel. 21T Legend 26 & 30 

55127-002 Assy-Gear Drive, Hel. 21T Legend 26&30 

55127-003 Assy-Gear Drive, Hel. 26T Legend 26 & 30 

55127-004 Assv-Gear Drive, Hel. 26T Leqend 26 & 30 

DRIVE GEARS 


06318 Gear-Spur 36T Idler MKII 

06338 Gear-Spur, Pinion 5T Gear Driven Stackers 

06464 Gear-Bevel 18T MKII 8 Page Drive 

06653 Gear Bevel 20T Feeder Continuous Feeder 

07116 Gear-Spur/Bevel 21T/24T MKII 8 Page Gear Box 

07478 Gear-Spur 21T Stacker 



11607 Gear-Spur 18T MKI, 400, 500 Series 

14725 Gear-Spur, Idler Steel 56T MKI, 400, 500 Series 

OM3192 Gear-Spur, Idler Delrin 56T O&M Futrua 

S40997 Assy-Gear Sheave 21T 700 Series 

CROSSCARRIER GEARS 


12321 Gear-Bevel 20T MKII 

14956 Gear-Spur 21T MKI, 400, 500 Series 

14957 Gear-Spur/Sheave 18T MKI, 400, 500 Series 

29407 Gear-Spur 28T F18, F20, 500 Series 

29953 Gear-Spur 32T MKII lmp,200, 600, 700 

29954 Gear-Spur/Sheave 26T MKII lmp,200, 600, 700 

51543 Gear-Spur 32T Liberty Series 


(CALL: 800-543-6107 FAX: 800-452-0947 

email: parts@baumfolder.com vvwvv.baumfolder.com BAUMFOLDER

20842 

23847 

VARIABLE SPEED PULLEYS 


OM3213 Sheave-Varispeed 5/8 Bore 

20842 Sheave-Varispeed 5/8 Bore 

21894 Sheave-Varispeed .88 Bore 

22952 Sheave-Varispeed .63 Bore 


23227 Sheave-Varispeed .88 Bore 



261-257-01-00 Sheave-Varispeed 5/8 Bore 

DRIVE BELTS 


21896 Belt-Gear 1422V420 

22394 Belt-Gear 1422V460 

22395 Belt-Gear 1422V400 

22396 Belt-Gear 1422V300 

23232 Belt-Gear 1922V332 

23608 Belt-Gear 300L100 

23874 Belt-Gear 322L100 

24728 Belt-Gear 540L100 

Baumfolder ¡s your complete source of belts for your Baumfolder Equipment. 

Cali our Parts Department at the number below for help in identifying belts not 

shown in this publication. 

21129 

MARBLES 


21123 Ball-Steel 5/8" 

21128 Ball Glass 5/8" 

21124 Ball-Steel 3/4" 

21129 Ball-Glass 3/4" 

21125 Ball-Steel 1" 

21130 Ball-Glass 1" 

24115 Ball-Delrin 1" 

31018 Ball Steel 1.25" 

31016 Ball-Acrylic 1.25" 

53384 Liner-Marbie Holder 

16903 Bearing-Flanged Nylon 


CALL: 800-543-6I07 FAX: 800- 452-0947 

email: parts@baumfolder.com vvvvw.baumfolder.com BAUMFOLDER 1 1

23363 

PUMP FILTERS & VANES 

PUMP FILTERS 


21083 Filter-Air.lntake Gast AB601G 

21499 Element-Filter (2565 & 1550) Gast AA905G 

21502 Filter-Felt, Pump Gast D344B 

21504 Element-Filter,Pump (10 x 1040) Gast AA905F 

30333 Filter-Pump (0740) Gaat B343B 

30435 Filter-Pump (2567) Gast AC393 

BP74000105 Filter Canister w/Element Becker T4.25 

268-673-01-00 Element- Filter Becker T4.25 

FK7000224 Element-Filter Ext. Becker T4.40 

BP90950500 Filter-lnternal Becker T4.25 & T4.40 

FK7000223 Filter-lnternal Becker T4.25 & T4.40 

FK7000066 Filter-lnternal Becker 14.25 & T4.40 

FILTER JARS 


21543 Jar-Fiíter, Pump,P¡nt (2565) Gast AA805 

22967 Jar-Glass,Pump (3040) Gast AA401 

23363 Jar-Pump, Alum (3040) Gast AA-75 

30332 Jar-Pump, (0740) Gast AA125 

30436 Jar-Pump, Alum GastAA-132 

PUMP VANES 


21616 Vane-Pump (2565 Dry) Gast AA750D 

21617 Vane-Pump (10 x 1040) GastAB-125-E 

21621 Vane-Pump (1550 Dry) Gast AB125B 

22872 Vane-Pump (3040 Dry) Gast AB934A 

23465 Vane-Pump (11x1740) Long Gast AC-411 

23466 Vane-Pump (11x1740) Short GastAC-412 

261-644-BG-01 Vane-Kit (2567 Dry-Pump) Gast K636 

267-088-01-00 Vane-Pump (1023) Gast K479 

BP90134900 Vane-Pump (Becker T4.25 DSK) Becker 

31466 Vane-Pump (2567) Gast AH195 

31467 Vane-Pump (0870 & 1022) Gast AB992B 

FK7000065 Vane Set (7) Becker T4.40 

268-672-01-00 Vane (7 required) BeckerT4.25 


CALL: 800-543-6107 FAX: 800-452-0947 


21771 24163 

714 Eleetries 

45290 

262-742-01-00 

714 PARTS 

714 BELTS 


21771 Belt.Stacker all but714XLT 

24163 Belt.Gear all 

24164 Belt.Gear all but XE&XLT 

24165 Belt.Gear all 

24783 Belt.Gear 714XE&XLT 

264-697-01-00 Belt.Stacker 714XLT 

714 ELECTRIC AL PARTS 


22970-021 Brush, Motor for 22970-020 

23129 Brush,Motor for 22970-001 

24324-001 Control-Motor, DC all models 

264-452-01-00 Motor De 1/6 hp all models 

268-295-01-00 Motor De 1/6 hp all models 

30060-012 Manual Starter (pump) 714A Model 

30920 Circuit Breaker 15A (pump) all but A Model 

30921 Circuit Breaker 3.5A (power) all but A Model 

37680-013 Switch (power) A Model 

714 FEEDER AND PUMP PARTS 


45290 Retard Roll All Friction Feed 

48429 Feed Tire All Friction Feed 

50080 Tire.Sucker Wheel A & B Model 

50498 Assy-Tab Sheet Detector A&B Model 

S261-680-BG-01 Assy-Tab Sheet Detector XE & XLT 

30435 Filter, Pump 

714 TUNE UP KITS 

PART# MODEL FOLDER 

262-741-01-00 714 Friction 

262-742-01-00 714 Air Feed (prior to 714XE model) 

267-224-BG-01 714 Air Feed (714XE & 714XLT model) 

For a more complete listing of parts for your Baumfolder 714 Table Top Folder. refer to your 

Parts Book. If you need help identifying the part, please contact one of our Order Analysts at 

the Toll Free number shown below. 


CALL: 800-543-6107 FAX: 800-452-0947 

email: parts@baumfolder.com www.baumfolder.com 

BAUMFOLDER 13

The most critical factor ¡n controlling the 

paper stock being folded, ¡s the design and 

condition of the fold rolls. 

Worn rollers, or rollers manufactured from the 

wrong material or the wrong specifications, 

may prevent you from getting a good, 

consistent fold. Trying to control today's slick 

stock with worn rollers is like trying to drive 

your car on snow with bald tires. You will not 

have the grip to maintain positive control. 

Years ago, we could run almost anything 

using steel fold rolls. We learned that with the 

changes in paper and printing processes, 

steel rolls just didn't have enough grip for 

certain jobs. 

FOLD ROLLS 

Fold roll gripping problems were virtually 

eliminated through the introduction of the 

combination fold roll. The "combo" fold roll 

consists of alternating steel and urethane 

segments. It combines the durability of the 

steel roll with the grip of the solid urethane roll. 

The "combo" roll has become the standard 

type roll being supplied on new floor model 

folders manufactured today. 

Baumfolder can supply brand new fold rolls, 

manufactured to the original design 

specifications, for both current production 

models and older model Baumfolders. In many 

cases your older folder can be updated with 

the installation of combo rolls to replace the 

original steel rolls. 

HOW DO YOU KNOW YOUR FOLD ROLLS ARE WORN? 

The performance of your Baumfolder, like 

any piece of equipment, will gradually 

deteriórate as parts wear through normal 

use. A point will be reached when the set up 

time and other factors, such as spoilage , 

will start to affect production. At this point 

you should contact your authorized Baum 

dealer to have one of their Service 

Technicians make some simple checks to 

determine how much wear has occurred. 

Here are a couple of ways you can check 

your fold rolls for wear: 

Steel Rolls 

To check for wear on steel rolls, you can use 

three 2x12 inch strips of 20# bond or 

equivalent stock. Adjust the rolls down so 

they are set for constant pressure. Roll a 

strip in by hand on each end of the rolls and 

one in the center. Check the pressure of 

14 

each strip. If the rolls are worn, you will not 

have any pressure on the center strip. The 

complete set of rolls, including the right angle 

sections, should be checked. 

Solid Rubber / Urethane Rolls 

To check solid rubber/urethane rolls , visually 

check for uneven wear. Also, after a period of 

time, rubber rolls can glaze over and have a 

slick, shiny appearance. If these conditions 

are present, the rolls should be replaced or 

recovered. 

Combination Urethane/Steel Rolls 

For Combination rolls, visually inspect the 

Urethane bands for wear or damage. If the 

Urethane bands are damaged or worn below 

the steel, the rolls should be replaced or 

recovered. 


CALL: 800-543-6107 FAX: 800-452-0947 


FOLD ROLLS 

COMBINATION URETHANE/STEEL 

41165 

PART# DESCRIPTION I =ART# DESCR;= _ : \ 

1412-001 Roll-Fold, Idler 41258 Roll-Fold. h:S' 

261-215-BG-01 Roll-Fold, Idler 41268 Roll-Fold. Idler 

261-215-BG-02 Roll-Fold, Idler 41280 Roll-Fold, Idler 

261-216-BG-01 Roll-Fold, MD 41281 Roll-Fold. Idler 

262-184-BG-01 Roll-Fold, MD 41934 Roll-Fold, MD 


264-Í06-BG-02 Roll-Fold, Idler 41936 Roll-Fold, MD 

264-747-01-00 Roll-Fold, MD 42019 Roll-Fold, MD 

267-380-BG-01 Roll-Fold, Idler 43281 Roll-Fold, MD 


39797 Roll-Fold, MD 48087-003 Roll-Fold, MD & Idler 

39861 Roll-Fold, MD 49081 Roll-Fold, MD 

39896 Roll-Fold, Idler 49082 Roll-Fold, Idler 


40792 Roll-Fold, Idler 50449 Roll-Fold, MD 


40794 Roll-Fold, Idler 51802A Roll-Fold, Idler 

40795 Roll-Fold, MD 52763 Roll-Fold, Idler 


41001 Roll-Fold, Idler 53341-002 Roll-Fold, MD 

41002 Roll-Fold. MD 53341-003 Roll-Fold, MD 

41003 Roll-Fold, Idler 53356-006 Roll-Fold, Idler 

41004 Roll-Fold, MD 54182-001 Roll-Fold, MD & Idler 

41005 Roll-Fold, Idler 55567-001 Roll-Fold, MD & Idler 

41163 Roll-Fold, MD 56348-002 Roll-Fold, MD & Idler 

41164 Roll-Fold, MD OM3580 Roll-Fold, MD 

41165 Roll-Fold, Idler OM3586 Roll-Fold, Idler 

41246 Roll-Fold, MD OM3587 Roll-Fold. MD 

41247 

Roll-Fold. Idler 

SOLID RUBBER ROLLS 

13413 

PART# DESCRIPTION PART# DESCRIPTION 


13413 Roll-Fold, Idler 29099 Roll-Fold, MD 

18218 Roll-Fold, Idler 29101 Roll-Fold. MD 

18224 Roll-Fold, Idler 41302 Roll-Fold. MD 

18232 Roll-Fold, Idler 48037 Roll-Fold, Idler 

18241 Roll-Fold, Idler OM3062 Roll-Fold, Idler 

18247 Roll-Fold, Idler OM3063 Roll-Fold, MD 

18287 Roll-Fold, MD OM3272 Roll-Fold, MD 

18320 Roll-Fold, MD OM3273 Roll-Fold, Idler 

27995 Roll-Fold, MD OM3546 Roll-Fold, MD 

28327 Roll-Fold, Idler OM3548 Roll-Fold. Idler 

Replace/j,, 

T

ROLL RECOVERY 

41165 

THE RECOVERY PROCESS SHOULD 1 RECOVER OR BUY NEW? 

Baumfolder can recover your Combination 

Urethane/Stcel fold rolls using the same process 

and material originally used to manufacture 

your fold rolls when they vvere brand new. 

Baumfolder will grind the recovered rolls to the 

same dimensions and tolerances required of 

brand new rolls. 

When your rolls are received for recovering, 

they are first inspected to be sure they can 

properly be recovered. The majority of the rolls 

can be successfully recovered. Once in a while 

a roll has been damaged so badly during normal 

use that it can't be recovered to Baumfolder's 

specification. If damage is found during 

inspection you will be contacted to discuss the 

options before proceeding vvith recovering. 

Next all the oíd urethane must be removed from 

each of the grooves and the surface of the 

groove cleaned to insure proper bonding of the 

new urethane segment to the steel. Baumfolder 

Urethane is especially formulated for máximum 

grip and long life. 

The urethane segments are precisión ground to 

the original Baumfolder specifications that were 

used to originally manufacture the roll. The 

fmished roll is reinspected to insure it meets our 

quality standards and then carefully packed for 

rcturn shipment. 

Recovering existing fold rolls can be a good altemative 

to buying new rolls. Here are some guide lines to help 

determine which is the best choice. 

YOU SHOULD CONSIDER RECOVERING: 

1) When price is a primary consideration. 

2) When you can be without your folder while the rolls 

are being recovered. Remember your folder will be 

dovvn until the rolls come back. 

3) When the steel body of your roll is in good condition. 

4) If you do not plan to keep this folder for a long time. 

5) This folder is primarily used as a backup to a 

newer folder. 

YOUR SHOULD CONSIDER NEW ROLLS 

1) When you want the absolute best quality by having a 

completely new fold roll. 

2) When you want to have the mínima) amount of 

downtime for your folder. 

3) When the steel body of your rolls is badly wom or 

bent. 

4) When you plan to keep your folder for a while. 

To help with the recovering of your fold rolls, ask 

one of'our Order Analysts to send you a copy of our 

free "CUIDE TO RECOVERING FOLD ROLLS" 

FOR MORE INFORMATION AND/OR COST OF ROLL RECOVERY 

CONTACT THE BAUMFOLDER PARTS DEPARTMENT AT 800-543/6107 

.Repiacen^ 

cf'BAÜMFOLDER^. 

ix 4r i\ 


jCALL: 800-543-6107 FAX: 800- 452-0947 

email: parts@baumfolder.com vvvwv.baumfolder.com BAUMFOLDER

m rito 

FLOOR MODEL FOLDER TIRES 


06182 Caliper Draw Roll Band 

OM3750 Caliper Draw Roll Band 

10306 Retarder Tire, 7/8 x 1-3/4 x 1 

12718 Retarder Tire, 1 x 1-1/2 x 5/8 

14993 Retarder Tire, 1x1-1/2x1 

08997 Feed Tire 

13266 Feed Tire 

07781 Scoring Rubber, 7/8" S/S 

10350 Scoring Rubber, 1-1/8" S/S 

06402 Pulí Out Tire, 7/8" S/S 

10347 Pulí Out Tire, 1-1/8" S/S 

TABLE TOP FOLDER TIRES 

45290 


07781 Scoring Rubber, 7/8" S/S 

06402 Pulí Out Tire, 7/8" S/S 

45290 Retarder Tire, Ultrafold 

48429 Feed Tire, Ultrafold 

50080 Tire-Sucker Wheel 714 

52335 Pulí Out Tire-Toner Resistant 

• 

50080 


CALL: 800-543-6107 FAX: 800-452-0947 

email: parts@baumfolder.com www. baumfolder.com BAUMFOLDER 17

BAUMFOLDER TUNE-UP KITS 

Table Top Tune-up Kit 

OuOOOQOO 

500 Series Tune-up Klt 

Floor Model Tune-up Kit 

Baumfolder has Tune Up Kits available for the Ultrafold 714 Table Top Folder and most popular 

models of Baumfolder Floor Model Folders.Your Baumfolder was built to provide many years of 

service. However, like any piece of mechanical equipment, some wear takes place during the 

normal day-to-day operation of your folder. 

Some routine maintenance needs to be done on a regular basis to keep your folder in good 

running condition . Thls is similar to having your car tuned up and the oil changed to keep it in top 

running condition. 

The tune up kits contain the parts which need to be replaced on a regular basis. Feed tires, 

retard tires, pump filters, lube canisters, etc. may be included. The actual parts will vary 

depending on the particular model. Tune up Kits are a convenient and economic way to keep 

your folder in good condition. Considerable money can be saved by ordering a tune-up kit as 

compared to the price of individual parts. 

Table Top Tune Up Kits 

PART# MODEL FOLDER 

262-741-01-00 714Friction 

262-742-01-00 714 Air (prior to 714XE ) 

267-224-BG-01 714 Air (714XE & XLT) 

P/N 262-742-01-00 

714 Air Table Top Folder 

QTY PART# DESCRIPTION 

3 50080 Sucker Wheel Tire 

1 50498 Sheet Detector Tab 

4 06402 Pullout Tire 

1 24108-003 Sure Wash 

18 

Replaceta 

fb BAUMFOLDER 

/y, 

•-ir 

P/N 262-741-01-00 

714 Friction Table Top Folder 


2 48429 Feed Tire 

2 45290 Retard Tire 


1 24108-003 Sure Wash 

P/N 267-224-BG-01 

714XE & XLT Air Table Top 


2 S261-680-BG-01 Sheet Detector Tab 

2 30435 Filter-Pump 


1 24108-003 Sure Wash 


(CALE: 800-543-6107 FAX: 800-452-0947 

email: parts@baumfolder.com vvwAv.baumfolder.com BAUMFOLD E R

FLOOR MODEL TUNE-UP KTTS 

PART# MODEL FLOOR 

263-651-BG-01 017/417/517 Folder 

263-652-BG-01 400 & 500 Folder 

263-653-BG-01 700 Series Folder 

263-654-BG-01 Liberty Series I Folder 

263-655-BG-01 Legend 20 & 23 Folder 

263-656-BG-01 Legend 26 Folder 

267-223-BG-01 Baum USA 2020 Folder 

P/N263-651-BG-01 

Model 017 Folder 


2 13266 Wheel-Feed 

2 12718 Tire-Retarder 


6 20438 Screw-Brass Point 

6 20312 Screw-Filstr Machine 

6 07728 Screw-Slitting Blade 

2 06443 Spring-Stacker Hd Dn 

1 06438 Stripper-Slotted 

P/N 263-652-BG-01 

400/500 Series Folder 


2 06182 Band-Draw Roll 





1 06030 Cone 

2 06443 Spring-Stacker Hold Dn 


2 21502 Filter-Felt Pump 

4 20536 Screw-Thumb 

4 49085-001 T-Knob 

P/N 263-653-BG-01 

700 Series Folder 


2 06182 Band-Draw Roll 





1 42026 Plate-Driver 

2 06443 Spring-Stacker Hld Dn 



4 23918 Knob-Knurled 


CALL: 800-543-6107 FAX: 800-452-0947 

email: parts@baumfolder.com vvvvvv.baumfolder.com 

P/N 263-654-BG-01 

Liberty Series Folder 






2 52132 Tire-Foam 

2 44340 Dial-Baumset 

P/N 263-655-BG-01 

Legend 20 Folder 









1 53420 Disc-Coupling 

1 228-326-01-00 Lube Canister 

P/N 263-656-BG-01 

Legend 26 Folder 






2 52132 Tire-Foam 

1 228-326-01-00 Lube Canister 

P/N 267-223-BG-01 

Baum 2020 Folder 






1 B228-326-01-00 Lube Canister 

2 203-508-06-00 O-Ring 

1 260-568-01-00 Pad-Wear 

1 24108-003 Sure Wash 1/2 Pt 

4 210-021-01-00 Cap-Rubber 

4 261-355-04-00 Screw-Thumb 

BAUMFOLDER 19

BAUMFOLDER REBUILD KITS 

Baumfolder Rebuild Kits are a quick, económica! way to rebuild your Baum Folder. Baumfolder has 

rebuild kits available for the Baum 714 Table Top Folders and most Baumfolder and O&M Floor Model 

Folders. Check vvith our Parts Department to determine availability of a kit for your model folder. 

Baumfolder Rebuild Kits provide an easy way to order the most commonly needed parts for a successful 

rebuild of your folder. Years of experience has proven that it is cheaper to do the job right and replace 

certain critical parts each time you rebuild your folder rather than re-using some of these parts. 

You can save over 25%, and do the job right, by purchasing these parts in a kit rather than individually . 

A typical 714 Table Top Rebuild 

Kit Contains: 

20 

Fold Rolls 

Roll Gears 

Stacker Tapes 

Selected Bushings/Bearings 

Feed Tires/Tabs 

Feeder Gears 

Drive Belts 

fo" BAUMFOLDER' 


¡CALL: 800-543-6107 FAX: 800-452-0947 


REBUILD KITS ARE AVAILABLE FOR 

Here is a partial list of the Baumfolder Models that Rebuild Kits are available for. Contact Baumfolder 

Parts to check on models not listed and for pricing information. 

714 Friction Table Top Model 420 Model 720 

714 Air Table Top Model 423 Model 723 

Model 017 MI • • M H M I Model 726 ^BHHHHI 

MKI 17x22 Model 518 Model 826 

MK120x26 Model 926 (Liberty) 

MKII 23x36 Model 523 Model 1020 (Legend 20) 

MKII 26x40 

Model 417 

•i •MHMH Model 1023 (Legend 23) 

Model 223 Model 1126 (Legend 26) 

Model 418 Model 226 Baum 2020 

WHY BUY A REBUILD KIT 

Why buy a rebuild kit instead of just replacing the rolls or selected parts? In some situations. rerlacin; jusi 

the fold rolls will correct the problem. However, most of the time, other critical parts are wcm arrd r.eed to 

be replaced in addition to the rolls. 

Baumfolder Rebuild Kits typically include: 

l )Fold Rolls-These are the heart of the folder. No rebuild is complete without replacing the rafe Fold 

rolls provide grip and control to the sheet being folded. 

2) Bushings/Bearings- Replacing a roll without replacing the oíd bushings/or bearings may OH 

inconsistent folding. Since these parts are relatively inexpensive, it is good practice to pr •• \:. ± 

fold rolls with new bearing surfaces. 

3) Roller Eccentrics.- These are the pivot point for your roller boxing. As they wear you get thay trt ytur 

rollers resulting in inconsistent folding. 

4) Register Tapes- As register tapes get worn and frayed, they can cause the sheet to srurrtble g: :r.g 

the register, resulting in inconsistent folding. 

5) Deflectors- Over a period of time, deflectors can get nicked or damaged resulting ir. ¡'-a: 57_rrtbhr.g. 

6) V-Belts - Since belts are a wear item and are inexpensive, it is best to replace the— as rarr :í the rebutid. 

Why spend hundreds of dollars rebuilding your folder and have a belt break a week larer rurr-g y ra ¿CVSTJ 

in the middle of that big job. 

7) Roll Gears- The roll gears are normally difficult to get off the journal of the oíd rolls. — KK u a good 

chance of breaking or damaging the gears by taking them off and installing them or j : _r rte.v rolls. Ova a 

long period of time, there is some wear, resulting in gear failure. It is a good rractt.e :: sszi" regear^ 

whenever replacing the fold rolls. It is best to do the job right the first time rather thar. r:e;erreal the 

rebuild. This will result in a superior job, and will be more cost efficient sir.ee the rebutid Vttt : :s_> less 

than buying the individual parts. 


kCALL: 800-543-6107 FAX: 800-452-0947 

email: parts@baumfolder.com www.baumfolder.com BAUMFOLDER 21

22 

FOLDER GAGES AND GAGE KITS 

INDIVIDUAL GAGES 

09934 10431 10613 261-801-01-00 261-082-01-00 261-803-01-00 


09934 Gage-Plate Setting 

10431 Gage-Roll .812 

10613 Gage-Deflector Setting 

10978 Gage-Deflector Setting 

38334 Gage-Roll .718 

91319 Gage Fold Pan 

91640 Gage-Deflector 3/32 

91641 Gage-Deflector .812 

91643 Gage-Deflector 3/16 

92020 Gage-Deflector 1/8 .812 

261-801-01-00 Gage-Plate to Roller 

261-802-01-00 Gage-Nose Setting 

261-803-01-00 Gage-Deflector Setting 

GAGE KITS 


261-998-BG-01 2020 Folder Gage Kit 

267-073-BG-01 500 Series Gaae Kit 

OPERATING BAUMFOLDERS 

"Operating Baumfolders" is one of the most complete works of its kind. 

It is written for the folder operator by a folder operator and a former 

Baumfolder Service Representative. It is especially helpful for operators 

of Older Model Baumfolders built prior to 1990. 

Some of the subjects covered include: 

• Theory of buckle folding 

• Terminology as it applies to folding 

• Basic damage prevention 

• Basic Setup 

• Troubleshooting 

• Attachments and their use 

• Basic impositions 

• Glossary of bindery terms 

This 140 page book is something every folder operator, graphic arts 

instructor, graphic arts student, or anyone else connected vvith the 

bindery, wiII vvant to have. 

TO ORDER or for INFORMATION 1 

CALL: 800-543-6107 FAX: 800- 452-0947 

email: parts@baumfolder.com wvvvv.baumfolder.com BAUMFOLDER

10272 

REGISTER TAPES 


20924 Register Tape, Cloth 1"x61" 

20925 Register Tape, Cloth i"x73" 

20926 Register Tape, Cloth 1"x97" 

20929 Register Tape, Cloth 1.5"x61 

20930 Register Tape, Cloth 1.5"x97" 




23909 Register Tape.PVC 1.5"x102" 

30217 Register Tape, PVC i"x73" 

30861 Register Tape, PVC 1.5"x105" 

31200 Register Tape.PVC 1.5"x74.5" 

31310 Register Tape.PVC 1.5"x105" 

31311 Register Tape.PVC 1.5"x128.5" 

260-318-01-00 Register Tape.SYN 50mm x 78.31" 

OM3110 Register Tape.PVC 1.5"x61" 

OM3111 Register Tape.PVC 1"x61" 

OM3162 Register Tape.PVC 1.5"x73" 

STACKER BELTS 


06346 Stacker Belt 19-1/2" x 35-1.8" 

07103 Stacker Belt 26-1/2" x 47" 

10272 Stacker Belt 17-3/4" x 28-3/4" 

18717 Stacker Belt 24"x 47" 

21771 Stacker Belt 1-1/2" x 35-1 ;8" 

26307 Stacker Belt 17-3/4" x 35-1/8" 

260-797-01-00 Stacker Belt 1-1/2" x 35-1 4" 

264-697-01-00 Stacker Belt 1-1/2" x 44.98" 


jCALL: 800-543-6107 FAX: 800-452-0947 


24 

BAUM / NYGREN DAHLY DRILL BITS 

BITS 

Bit F nish ^ STANDARD TEFLON TITANIUM 

Inch MM PART # PART # PART # 

1/8 3.1 NDB-0527 NDB-0527-CHT NDB-0540 

5/32 4 NDB-0528 NDB-0528-CHT NDB-0541 

3/16 5 NDB-0529 NDB-0529-CHT NDB-0542 

7/32 5.5 NDB-0530 NDB-0530-CHT NDB-0543 

1/4 6 NDB-0531 NDB-0531-CHT NDB-0544 

9/32 7 NDB-0532 NDB-0532-CHT NDB-0545 

5/16 8 NDB-0533 NDB-0533-CHT NDB-0546 

11/32 9 NDB-0534 NDB-0534-CHT NDB-0547 

3/8 9.5 NDB-0535 NDB-0535-CHT NDB-0548 

13/32 10 NDB-0536 NDB-0536-CHT NDB-0549 

7/16 11 NDB-0537 NDB-0537-CHT NDB-0550 

1/2 12.5 NDB-0538 NDB-0538-CHT NDB-0551 

DRILL BLOCKS 

50253 


NA-3184 Block-Drill.Wood 5/16"Thick ND5&ND10 

NA-3184-001 Block-Drill Wood 3/8" Thick K3 & Compact 

262-180-01-00 Block-Drill Wood For 1T& 1F 

50253 Block-Drill Wood For ND-1F & 1T 


CALL: 800-543-6107 FAX: 800- 452-0947 


DRILL ACCESSORIES 

DRILL HEADS 


SNDB-0140 Drill Head Non Metric 

S265-389-BG-01 Drill Head Metric 

S262-038-BG-01 Horseshoe Assy (replaces NS-73-A) Complete Assy 

261-999-01-00 Horseshoe (for S262-038-BG-01) 

31390 O-Ring (for S262-038-BG-01) 

NA-S-156-A Extensión-Drill 5/16 

NDB-0583 Rebuild Kit (Drill Head) 

NDB-0506 

^^^Hj NSK-100-004 

MISCELLANEOUS 


NDB-0506 Stick-Lubricant,Drills 

SNDB-0524 Hand Drill Sharpener 

NSK-100-004 Carbide Bit for Hand Drill Sharpener

26 

MISC PARTS AND ACCESSORIES 

PART# FK7000060 

STATIC TINSEL 

Tinsel can help dissipate static charges that build 

up in stock as it travels dovvn the register or exits 

onto the stacker. This is another possible solution 

to your static problems. 

PART# FK7000059 

TESA TAPE 

Tesa Tape can be applied to steel rolls to assist in 

those hard to run jobs that need additional grip. 

This tape gives you additional grip to help 

compénsate fbr worn rolls or for jobs that require 

combination rolls. 

PART# B228-326-01-00 

GREASE CANISTER 

The Baum 2020 and Legend Series Folders 

use a Lube Grease Canister which provides 

automatic lubrication to the gears and other 

critical components. This canister must be 

replaced approximately every 9 months to 

insure proper lubrication of your folder. 


CALL: 800-543-6107 FAX: 800- 452-0947 


TOTAL COUNTER 

PART# 30633 Total Counter 

The Microcount II Total Counter is a highly accurate, compact, state-of- the-art total counter. 

When mounted on either a Baumfolder Tabletop Folder or Floor Model Folder, it allows 

counting up to 999,999 pieces. The unit consists of the MC II Counter, Microscan II Scanner 

and 'instructions for lnstanation / Operation. 

Counter features include: 

• A large, six digit LED display—0.56 inch high (easier to read than an LCD type) 

• An easy-to-reach reset button located on front panel (includes time delay to avoid accidental reset) 

• Durable aluminum case vvith magnetic mounting base (mounting base is svvivel for easy viewing) 

• Built-in memory that "stores" the count in case of a power failure 

• Memory is internal to the solid-state circuitry (no battery to replace) 

Scanner features include: 

• Modulated, infrared device not affected by ambient light (no false readings from printed stock) 

• No sepárate sensitivity control required 

• Strong magnetic base for mounting on fold píate 

fd1 BAUMFOLDER < 

Mi 


(CALL: 800-543-6107 FAX: 800-452-0947 

email: parts@baumfolder.com www.baurnfolder.com BAUMFOLDER 27

BATCH COUNTERS 

263-349-BG-01 

The DCU-600 Batch Counter ¡s a compact, state-of-the-art batch counting system. 

This batch counter can be used on either a Baumfolder Tabletop or Floor Model folder. 

The DCU-600 will count and sepárate folded material coming off the stacker into 

predetermined quantities up to 999 pieces. It can also be used as a Total Counter ¡f 

you do not want to batch. The Batch Counter consists of the DCU-600 Counter Head, 

a Microscan II Scanner, a batchlng device and instructions. 

268-322-BG-01 

The counter features a large (0.56-¡nch high) six digit LED display. A front panel 

pushbutton switch gives you the option of displaying total count, total batches, or 

number of pieces counted in current batch. The DCU-600 comes with a universal 

mounting bracket which is easily adaptable to your model folder. 

The batch size is easily set using the thumbwheel switches located on the front panel. 

You can set any batch size from zero to 999 pieces. The length of time the batching 

device is activated is adjustable from 0.1 seconds to 10 seconds. The DCU-600 can be 

ordered with either a solenoid valve to interrupt the vacuum to the sucker wheel for air 

feed machines or with a lift wheel kit to skew the folded piece at the stacker to sepárate 

the batches. 

The Microscan II scanner is a modulated, infrared device that is not affected by ambient 

light and features a heavy-duty magnet for easy mounting to the fold píate. 


263-348-BG-01 Batch Counter with/Soleniod Valve Floor Model Folder -110v/60Hz 

263-349-BG-01 Batch Counter with/Lift Wheel 714TableTop-110v60Hz 

268-322-BG-01 Batch Counter with/ Solenoid Valve 714TableTop-110v60Hz 

Replaceoj, 

-5° BAUMFOLDER V 


¡C'ALL: 800-543-6107 FAX: 800- 452-0947 

email: parts@baumfolder.com www .baumfolder.com BAUMFOLDER

GATEFOLD ATTACHMENT 

In order to do what is commonly called a "double gatefold" on your Baumfolder, 

you will need a Gatefold attachment. This attachment consists of a special fold píate 

and a solid state electrical control. The special fold píate is required to fold a single 

gatefold in half. The folding fíngers of the gatefold unit prevent the single gatefold 

from opening up during the final fold. This attachment adds a folding "niche" that 

can easily pay for itself. 

Baumfolder has Gatefold Attachments available for both current production floor 

model Baumfolders such as the Baum 2020 as vvell as for most previous production 

floor model Baumfolders. 

The Baumfolder Gatefold Attachment will increase your versatility and profitabilitv 

of your folder. 

Gatefold features include: 

• Precisión solid state controls for reliability and ease of operation. 

• Simple and easy to use operator controls 

• No need for special rolls 

• Heavy Duty Solenoids 

fo° BAUMFOLDER' 

.4* 

PART# DESCRIPTION MODEL 

014-Í05-VE-00 Assy-Gatefold 2020 Baum 2020 

1020-948 Assy-Gatefold-1020 Baum 20" Legend 




120-948A Assy-Gatefold-720 Baum Model 720 

126-948B Assy-Gatefold-726 Baum Model 726 

420-948A Assy-Gatefold-420/520 Baum Model 420/520 

926-948 Assy-Gatefold-926 Baum 26" Liberty Series 


ICALL: 800-543-6107 FAX: 800-452-0947 

email: parts@baumfolder.com vvww.baumfolder.com BAUMFOLDER 29

PERF-SCORE ATTACHMENT 

The Baum Ultrascore Perf-Score Attachment was designed speclflcally to add versatllity to your 

Baum 714 Table Top folder. It allows you to use your 714 as a perforating, scoring, and slitting 

machine in addltlon to foldlng. You won't need an extra machine dedicated to do an occasional 

perf, score or slitting job. 

The Ultrascore can be ¡nstalled or removed by the operator ¡n minutes. You can easily convert 

your 714 folder to a scoring machine and back to a folder whenever needed. The scoring shafts 

have mlcrometer adjustments for precisely controlling the depth of the score for different types 

and weights of stock. The Ultrascore uses an upper score blade that mates to a lower scoring die 

to produce a score similar to that produced by a press. 

The Perf/Score attachment comes standard with the followlng accessories. Additional accessories 

are listed below. 


1 51987 Head-Scoring Lower 

1 51989 Blade-Slitting 

i 51991 Blade-Perforator 24T 

1 51992 Blade-Score 

1 52092 Assy-Blade Holder 

1 S261-783-BG-01 Assv-Stripper. Slotted 

A microperf attachment is available for the Ultrascore which now allows you to do Microperfing on 

your Baum 714 Table Top. See Perf-Score Accessories below for Part Number. 

30 


242-105 Assy-Ultrascore 714 714 Table Top except XLT 

343-105 Assv-Ultrascore 714XLT 714XLT Table Too 

51987 52092 

MicroPerf Kit 

, Replace/ijj, 

' BAUMF0IBBR % 

TC 

¡2?StarQo»v 

PERF-SCORE ACCESSORIES 


51987 Head-Scoring Lower 

51989 Blade-Slitting 

51991 Blade-Perforator 24T 

51991-002 Blade Perforator 41T 

51991-003 Blade Perforator 64T 

51992 Blade-Score 

52092 Assy-Blade Holder 

S261-783-BG-01 Assy-Stripper, Slotted 

263-889-01-00 Micro-Perf Blade 

263-898-BG-01 Micro-Perf Kit 


| CALL: 800-543-6107 FAX: 800- 452-0947 

email: parts@baumfolder.com www.baumfolder.com BAUMFOLD E R

FLOOR MODEL SCORING ATTACHMENTS 

The Floor Model Scoring Attachment gives you letterpress-quality scoring, perforating 

and slitting on your floor model folder. 

This accessory lets you score and fold cover stock and other printed material in a single 

in-line operation. The special female and male scoring wheels provide a high-quality 

score by stretching the fiber of the stock. 

By scoring on the folder, you control the placement of the score to compénsate for 

variations in the printed material. It also frees up the press for other jobs. 

These scoring machines are precisión pieces of equipment manufactured to extremelv 

tight tolerances. Heavy-duty construction, large diameter scoring shafts and precisión 

ground scoring wheels, ensure an even and accurate score. 

J (f BAUMFOLDER %1 

You can now do micro-perfing with your Econo-Crease or 

Roto-Crease Scoring Machines by purchasing a micro-perf kit 

PART#267-726-BG-01. 


261-663-BG-01 Scoring Attachment 2020/2018 For 7/8 " Slitter Shaft 

267-965-BG-01 Scoring Attachment 2020 For 1-1/8" Slitter Shaft 

For other model Baumfolders, contact the Baumfolder Parts 

Department for pricing and availablility 


iCALL: 800-543-6I07 FAX: 800-452-0947 


MICRO-PERF ATTACHMENT 

The Baum Microperf produces an extremely fine line of 

perforation ( 72 per inch), which is ideal for tear-offs such 

as self mailers with a coupon or reply card. The microperf 

produces a crushed rather than a cut perforation, so the 

sheets lay fíat to feed better through a copier or láser 

printer. 

The Baum Microperf Attachment consists of a Microperf 

Blade Holder Assembly (complete with microperf blade), 

and a Microperf Collar Assembly (complete with 

replaceable microperf ring). The microperf assembly can 

be installed on any Baum 714 Table Top which has a Perf/ 

Score Attachment. It can also be installed on any Baum 2015, 2018, or 2020 Floor Model 

Folder which has adjustable slitter shafts. It will also work on other model Baum Floor Models 

with Adjustable Slitter Shafts. This can not be used on folders with fixed slitter shafts. 


263-898-BG-01 MicroPerf Assembly Fits Perf/Score and 7/8" Slitter Shaft Floor Model 

268-396-BG-01 MicroPerf Assembly Fits 1-1/8" Slitter Shaft Floor Model 

KNOCK OUT PERF ASSEMBLY 

A special Knock-Out Perforator is available for improved perfect-binding operations and saddle 

stitching on your Baumfolder. 

When signatures are brought from the folder, they are vacuum fed on most types of binders 

and stitchers. With some perforations, the vacuum can pulí the sheets apart at the 

perforations, causing problems with feeding. By substituting the knock-out perforator, the 

signature holds together, thus simplifying the binding process. It also allows the air to escape 

when folding all bookwork, and provides an improved adhesive surface for perfect binding. 

When using the knock-out perforator, the punched out pieces are separated and stripped from 

the folded pieces. 

The knock-out perforator is available for Baumfolder floor model folders with 7/8" and 1-1/8" 

diameter slitter shafts. 

32 


16197 Knock-out Perf Assy. For 1-1/8" Slitter Shaft 

91595 Knock-out Perf Assy. For 7/8" Slitter Shaft 

16196 15 T Knock-out Perf Blade For16197 

91593 12 T Knock-out Perf Blade For91565 


CALL: 800-543-6107 FAX: 800-452-0947 ; 

email: parts@baumfolder.com vvwvv.baumfolder.com BAUMFOLDER

BAUM WET SCORE 

The Baum Wet Score is a revolutionary wet-scoring system for use on floor-model Baumfolders. This 

unit uses fine needle applicators to apply an extremely thin, consistent une of an alcohol/water mixture to 

the stock as it moves dovvn the register table. The alcohol/water mixture conditions the papcr fibers to 

assist in making a right angle fold. 

The most common applications for a wet score are: 

• When folding cover stock and other types of paper which tend to crack or split. 

• When cross-grain folding. The Baum Wet Score temporarily neutralizes the effects of the paper 

grain, enabling tighter folds. 

• When running maps and other multiple-fold pieces, and especially when folding is required in the 

8-page (right angle) folding section. The use of a wet-score makes the fold tighter, resulting in easier 

handling, fewer jams, and more speed. 

The Baum Wet Score has an electronic valve fhat shuts off the flow of liquid to the needles when nothing 

is being fed down the register table. This protects the folder from excess moisture and eliminates 

hazardous puddling. 

The unit comes standard with four lines of score which can be moved anywhere along the length of the 

mounting bar. This gives you a wide variety of scoring options. The amount of fluid going to each needle 

is easily adjustable to provide just the right amount of alcohol/water for the job being run. 

WET SCORES 


262-469-BG-01 Assy-Wetter For Baum 2020/2018 

267-861-BG-01 Assy-Wetter For 26/30 

WET SCORE ACCESSORIES 


263-894-01-00 Needle -1" Standard Sharp 

263-895-0 Í-00 Needle -1" Standard Blunt 

263-956-01-00 Needle -1" Fine Sharp 

263-957-01-00 Needle -1" Fine Blunt 

262-470-BG-01 Assy - Nozzle, Tube & Mounting For adding lines 

For more information about the Baum Wet Score, and which model 

folders these can be adapted to, contact the Baumfolder Parts Department. 

TO ORDF.R or for INFORMATION Q 

CALI.: 800-543-6107 FAX: 800-452-0947 ; 


STATIC ELIMINATORS 

Static electricity, as it pertains to paper folders, can come frorn a number of different sources. One source 

is through friction as the sheet travels dovvn the register table and during the folding process. The static 

can result in inconsistent folding and jam ups, as the folded piecc exits the fold roilers. lf this is the typc 

of static problcm you are experiencing , then a Baumfolder Static eliminator should help you by 

reducing the amount of static. 

If the static is all ready in the paper before it is loaded on the feeder, and you are having problems 

separating the sheets or feeding it, this type static eliminator will not help. 

The Baumfolder Static Eliminator consists of two static bars and a povver supply that opérales on 

115v/60Hz. The static eliminator generales an ionization field that neutralizes the static charge. 

Baumfolder has static eliminators for the following model Baumfolders: 

34 


120-905 Static Eliminator, 720 Baum 220, 720 

126-905 Static Eliminator, 726 Baum 226, 226 

261-66Ó-BG-01 Static Eliminator, 20" Baum 2020 & 2018 

267-238-BG-01 Static Eliminator, 15" Baum 2015 

418-905 Static Eliminator, 418 Baum 418, 518 

Rcplacen,, 

BAUMFOLDER % 

% >V K 

TO ORDER or for INFORMATION % 

(CALL: 800-543-6107 FAX: 800- 452-0947 

email: parts@baumfolder.com vvww.baumfoldcr.com BAUMFOLDER

BAUM 714 ACCESSORIES 


55849-007 Parallel Cart 

51011 Dust Cover 

30633 Total Counter 

263-349-BG-01 Batch Counter Lift Wheel Batch 

268-322-BG-01 Batch Counter Vacuum Interupt 

242-105 Perf/Score Attachment 714XE 

343-105 Perf/Score Attachment 714XLT 

243-133A Sound Cover 714XE 

343-133 Sound Cover 714XLT 

263-898-BG-01 MicroPerf Kit Need Perf/Score Attachment 

S264-858-01-00 Static Eliminator 

FK2001271 Static Brush Kit 

^^Repiace^s. T O ORDER or for INFORMATION |Q 

rc^MJMK3U«R^%CALL: 800-543-6107 FAX: 800-452-0947 

L. jí^^k ^S' M email: parts@baumfolder.com www.baumfolder.com BAUMFOLDER

2020 ACCESSORIES 

261-660-BG-01 263-988-BG-01 


1320-133 Sound Cover 2020 & 2018 

267-903-BG-01 Remote Control DCT500 Electrics 

261-667-BG-01 Remote Control prior to DCT500 Electrics 

261-660-BG-01 Static Eliminator 2020 & 2018 

S261-842-BG-01 Marble Controller 

S1220-181A Hang On Stacker 

264-207-BG-01 Kit-Mobile Stacker ConvertsS1220-181A 

1320A-RS Rollaway Stacker Two Tiered 

267-965-BG-01 Scoring Machine for 2020 w/1-1/8" SS 

261-663-BG-01 Scoring Machine for 2020 w/7/8" SS 

263-898-BG-01 MicroPerf Assembly For 7/8" Adjustable SS 

268-396-BG-01 MicroPerf Assembly For 1-1/8" Adjustable SS 

262-469-BG-01 Wet Score 

263-988-BG-01 Jam Detector 

014-105-VE-00 Gatefold Attachment 2020 & 2018 

FK2001953 Independent Power Adaptor 2020, 2018 & 2015 

For a more information about accessories for the Baum 20! 5, 2018, 2020 FloorModel 

Folders contact your local Baum Dealer or Baumfolder Parts. 


ICALL: 800-543-6107 FAX: 800-452-0947

18 - Microglue

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?