INT 9 - PaintInfo

More documents

Recommendations

Info

MPI Approved Product # 44 MPI# 44 Interior Latex, Gloss Level 2 – (a high side sheen flat, ‘velvet-like’) Note: Requires a properly-prepared Level 4 drywall finish (i.e. assuming no critical lighting conditions). See "Recommended Levels of Drywall Finishing - GA-214-96" A white, or colored, waterborne latex-based paint with a low sheen finish. Used on primed/sealed interior plaster and gypsum board, and on primed wood and metals. [Gloss level must be a maximum of 10 units @ 60 degrees and sheen 10 to 35 units @ 85 degrees. Other evaluated characteristics include consistency/viscosity, dry time, fineness of grind, hiding power by contrast ratio method, reflectance, alkali resistance, flexibility, scrubbability, and sealing properties. See MPI ‘Detailed Performance’ Specs for complete details, specific requirements, and/or references.] MPI VOC Ranges (grams/L.) E3
MPI Approved Product # 138 MPI #138 High Performance Architectural Latex - Gloss Level 2 (a 'velvet-like' finish) Note: Requires a properly-prepared Level 4 drywall finish (i.e. assuming no critical lighting conditions). See "Recommended Levels of Drywall Finishing - GA-214-96" A high performance architectural latex coating, Gloss Level 2 (a 'velvet-like' finish). Designed to provide a significantly higher level of performance than conventional latex paints in the areas of scrub resistance, burnish resistance, and ease of stain removal. [Characteristics evaluated include gloss levels of maximum 10 units @ 60 degrees and 10-35 units at 85 degrees, hiding power, scrubbability, stain removal, burnish resistance, flexibility, and application properties. See MPI ‘Detailed Performance’ Specs for complete details, specific requirements, and/or reference specs.] MPI VOC Ranges (grams/L.) E3
Page 1 and 2: Interior System Evaluation - 9.2 IN
Page 3 and 4: Interior System - 9.2 INT 9.2 PLAST
Page 5: MPI Approved Product # 50 MPI #50 I
Page 9 and 10: Interior Substrates - MPI Architect

INT 9 - PaintInfo

Create successful ePaper yourself

Delete template?

Save as template?