Technical Leaflet AMONN WASSERLASUR

colours. The effect of each single colour depends on the type of wood. It is therefore advisable to always carry
out a test coat. It is furthermore recommended that the condition of the external paint is checked within 2 years of
application, especially on wood exposed the weather-side (south-west), renewing the same if necessary.
Yield: approx. 8-10 m²/l. per coat.
Thinning: AMONN WASSERLASUR is ready for use and should not be thinned
Re-coating: After approximately 4 hours, the surface can be sanded and re-coated.
Cleaning of tools: immediately after use with water.
4. Special advice
Wood preservatives contain active biocides for the protection of wood from animal and vegetable parasites. They
must be used according to the instructions and only if absolutely necessary. Misuse may cause damage to
health. When using products for the protection of wood, it is necessary to follow the regulations regarding hygiene
and safety in the work place and the protection of the environment (e.g. those regarding dangerous substances
and inflammable liquids) paying special attention to the designation on the tin and the safety data sheet (in
particular, danger symbols, danger description and indications, and safety advice). For detailed information on
this argument, please consult the “Information leaflet on the use of products for wood protection” published by the
German Chemical Industry Federation. Do not apply to wood which may come into direct contact with food,
animal feed or drinking water. During application, protect face, hands and eyes adequately, and ensure that there
is sufficient ventilation. Cover all switches and electric wires to avoid short-circuiting. Do not allow the product to
come into contact with plants. Not suitable for apiaries. Read the safety data sheet carefully. Keep out of the
reach of children and do not pour into the sewage system or into surface water.
Water hazard class 2 (German regulation) (Self-assessment): hazardous for water
Danger class according to VbF: not applicable
ADR/RID: not applicable
The information contained in this technical leaflet is based on recent research and technology. However, due to the extensive
range of applications, we are unable to offer an unconditional guarantee for all possible applications. Please contact us for any
further technical information or advice you may need.
Edition 3013/3 (September 01)
AMONN COLOR SrL/Gmbh – I– 39100 BOLZANO/BOZEN, Via Altmann 12 Altmannstrasse
Ufficio Commerciale/Handelsbüro: Tel: 0039 0471 904770 Fax: 0039 0471 904769 E-mail: info@amonncolor.com
Export: Tel: 0039 0471 904674 Fax: 0039 0471 910449 E-mail: export@amonncolor.com
2