27.05.2013 Views

Overpressure-Under- pressure Safety Device - Schwaben-Kunststoff

Overpressure-Under- pressure Safety Device - Schwaben-Kunststoff

Overpressure-Under- pressure Safety Device - Schwaben-Kunststoff

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

<strong>Over<strong>pressure</strong></strong>-<strong>Under</strong><strong>pressure</strong><br />

<strong>Safety</strong> <strong>Device</strong><br />

<strong>Schwaben</strong> -<strong>Kunststoff</strong> A sure grip on aggressives<br />

The safe protection for<br />

storage tanks for<br />

hazardous liquid chemicals


<strong>Over<strong>pressure</strong></strong>-under<strong>pressure</strong><br />

safety device:<br />

Depending on operating conditions<br />

and course of pipework at<br />

the plant there may arise a dangerous<br />

over<strong>pressure</strong> or under<strong>pressure</strong><br />

inside the areation and<br />

ventilation system of chemical<br />

storage tanks. This will happen<br />

especially when the tanks are<br />

being filled by using compressed<br />

air or when a gas scrubber is<br />

installed.<br />

Design and function:<br />

This safety device consists of a<br />

glued casing of PVC containing<br />

two hollow spheres of polyethlyene,<br />

placed at the aspiration and<br />

expiration (exhaust) side each.<br />

As soon as over<strong>pressure</strong> or under<strong>pressure</strong><br />

inside the exhaust<br />

air pipe system will overpass thepreset<br />

response <strong>pressure</strong>s, the<br />

correspondent sphere will rise<br />

for <strong>pressure</strong> relief. When the<br />

<strong>pressure</strong> decreases the response<br />

threshold, the sphere will sit<br />

back in its seat and the total areation<br />

and ventilation system is closed<br />

again.<br />

Field of application:<br />

The over<strong>pressure</strong>-under<strong>pressure</strong><br />

saftey device can be installed<br />

to nearly all tanks with atmospheric<br />

<strong>pressure</strong>. It is fitted as a<br />

glued joint from PVC, normally.<br />

As the overpresssure- under<strong>pressure</strong><br />

safety device is made<br />

of chemical-resistant materials it<br />

can be used universally.<br />

A sure grip on aggressives<br />

with the products<br />

from <strong>Schwaben</strong>-<strong>Kunststoff</strong><br />

Approved storage tanks<br />

and retention tanks<br />

from PE and PP<br />

Helically wound tubes from<br />

PE and PP<br />

<strong>Schwaben</strong> -<strong>Kunststoff</strong> A sure grip on aggressives<br />

Different types:<br />

There are two versions of the<br />

over<strong>pressure</strong>-under<strong>pressure</strong><br />

saftey devices.<br />

Standard type: for installation into<br />

the exhaust air pipe of the tank<br />

leading to the open air.<br />

Version for installation into piping<br />

systems: it will be used for media<br />

discharging corrosive gases<br />

analogue to the standard model,<br />

however, it is mandatory to instal<br />

the over<strong>pressure</strong> and under<strong>pressure</strong><br />

side into the clean air<br />

pipe of a gas scrubber and which<br />

has to be lead to the open air.<br />

DN<br />

50<br />

65<br />

80<br />

100<br />

125<br />

150<br />

A<br />

mm<br />

63<br />

75<br />

90<br />

110<br />

140<br />

160<br />

B<br />

mm<br />

63<br />

75<br />

90<br />

110<br />

140<br />

160<br />

C<br />

mm<br />

40<br />

63<br />

63<br />

63<br />

75<br />

75<br />

D<br />

mm<br />

245<br />

310<br />

410<br />

365<br />

430<br />

470<br />

E<br />

mm<br />

87<br />

100<br />

115<br />

135<br />

130<br />

135<br />

Response<br />

threshold<br />

over<strong>pressure</strong><br />

26 mm WS<br />

21 mm WS<br />

20 mm WS<br />

24 mm WS<br />

29 mm WS<br />

25 mm WS<br />

Note:<br />

The nominal diameter of the<br />

over<strong>pressure</strong>-under<strong>pressure</strong><br />

safety valve must no be inferior<br />

to the nominal diameter of the<br />

exhaust air socket of the tank.<br />

Options:<br />

<strong>Over<strong>pressure</strong></strong>-/under<strong>pressure</strong><br />

safety device for insatallation into piping system:<br />

E D<br />

A<br />

B<br />

DN<br />

50<br />

65<br />

80<br />

100<br />

125<br />

150<br />

A<br />

mm<br />

63<br />

75<br />

90<br />

110<br />

140<br />

160<br />

B<br />

mm<br />

145<br />

145<br />

165<br />

205<br />

255<br />

285<br />

Design and construction of ready to<br />

operate tank farms for liquid chemicals<br />

Chemical apparatus construction<br />

Process engineering tanks<br />

Gas scrubbers<br />

Technical equipment for tanks<br />

Assembly of piping systems<br />

Maintenance of tanks and tank farms<br />

The over<strong>pressure</strong>-under<br />

<strong>pressure</strong> safety device can<br />

be equipped with other pipe<br />

joints<br />

Increased response thresholds<br />

are possible<br />

Response<br />

threshold<br />

under<strong>pressure</strong><br />

20 mm WS<br />

14 mm WS<br />

18 mm WS<br />

18 mm WS<br />

15 mm WS<br />

15 mm WS<br />

<strong>Over<strong>pressure</strong></strong>-/under<strong>pressure</strong><br />

safety device - standard version:<br />

D<br />

mm<br />

186<br />

198<br />

233<br />

270<br />

298<br />

323<br />

E<br />

mm<br />

87<br />

98<br />

115<br />

135<br />

130<br />

140<br />

D<br />

E<br />

A<br />

Response<br />

threshold<br />

over<strong>pressure</strong><br />

26 mm WS<br />

21 mm WS<br />

20 mm WS<br />

24 mm WS<br />

29 mm WS<br />

25 mm WS<br />

B<br />

C<br />

Response<br />

threshold<br />

under<strong>pressure</strong><br />

20 mm WS<br />

14 mm WS<br />

18 mm WS<br />

18 mm WS<br />

15 mm WS<br />

15 mm WS<br />

Subject to technical alterations<br />

<strong>Schwaben</strong>-<strong>Kunststoff</strong><br />

Chemietank- und Apparatebau<br />

GmbH & Co. KG<br />

Augsburger Strasse 42<br />

D-86863 Langenneufnach<br />

Phone +49 8239 79-0<br />

Fax +49 8239 79-40<br />

E-mail: info@schwaben-kunststoff.de<br />

www.schwaben-kunststoff.de

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!