Produktinformation Set Compact Video Product information ... - Siedle
Produktinformation Set Compact Video Product information ... - Siedle
Produktinformation Set Compact Video Product information ... - Siedle
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Programming - manual<br />
Programming door calls<br />
Application<br />
Call from the door station to a bus<br />
telephone.<br />
At the bus telephone, a different<br />
ring tone optionally be selected.<br />
The volume of the door call can be<br />
changed at the bus telephone.<br />
1 Switch on the programming mode.<br />
At the VSNG 850-..., press the programming<br />
mode button briefly. The<br />
LED1 flashes in a 2-second rhythm<br />
to indicate that the programming<br />
mode is active.<br />
4 Hold down the light button for 4<br />
seconds. A protracted acknowledgement<br />
tone sounds in the receiver,<br />
the muting button flashes. A speech<br />
connection exists to the door station.<br />
The bus telephone is now in<br />
the programming mode. Leave the<br />
receiver off the hook.<br />
2 At the door station, hold down the<br />
programming button for 4 seconds.<br />
A protracted acknowledgement tone<br />
is then audible which is repeated<br />
every 5 seconds as long as the programming<br />
mode remains active.<br />
5 At the door station, hold down the<br />
required call button for 4 seconds<br />
until a protracted tone sounds at the<br />
door loudspeaker. The call button is<br />
now assigned to the bus telephone,<br />
no speech connection now exists.<br />
3 Lift the receiver at the bus telephone<br />
which you wish to program.<br />
6 Replace the receiver at the bus<br />
telephone. The call button is now<br />
firmly assigned to the bus telephone.<br />
Program additional users using the<br />
same procedure or quit the programming<br />
mode.<br />
19