flow meter
flow meter
flow meter
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Nomenclature № DESCRIPTION<br />
1011.0002.02 Vapour eliminator for LPGK<br />
VAPOUR ELIMINATOR<br />
1.4<br />
page 1 / 1<br />
Vapour Eliminator is composed of a cylindrical body, with volume of approximately 2<br />
liters, inlet (4) and outlet (3) couplings. Tube of Venturi (2) is assembled at the inlet coupling.<br />
Her function is to slow down the speed of the liquid spout, to make easy the elimination of<br />
gas phase from the liquid propan-butan. The gas phase is <strong>flow</strong> back to reservoir with a little<br />
liquid phase by calibrated orifice(1).<br />
At the body of Vapour Eliminator could be assembled the folowing :<br />
- Nipple with thread (5) for assembling of thermo-element for automatic regulation of<br />
temperature (only in case of instillation of electronic block)<br />
- Soket for mercury thermo<strong>meter</strong><br />
1. Calibrated orifice<br />
2. Venture tube<br />
3. Outlet<br />
4. Inlet<br />
5. Nipple<br />
The Filter is setted over the Vapour eliminator. The Filtre is composed of double metal<br />
mesh, with 11 664 cections on sm2. The Filtering surface is 400 sm2, thread is from stainless<br />
steel with dia<strong>meter</strong> 0,03 mm.<br />
Nomenclature № DESCRIPTION<br />
1010.0006.08 Inlet filter 1"<br />
1. Filter Body<br />
2. The filtering cylinder<br />
3. Magnetic Filter<br />
4. Cover Shell<br />
5, 6, 7. О - rings<br />
INLET FILTER COLO 1”