DURIMENT Concrete dispersant - MAPEI Betontechnik

MAPEPLAST BV 34 has to be added simultaneously with the mixing water. CAUTION: A
simultaneous dosage with Air-entraining agents is not possible, while the compatibility inside the concrete is
given. The mixing time has to confirm to the specific standards.
Effectiveness
Concrete with MAPEPLAST BV 34 shows a better processing ability and lower water demand. By
adding MAPEPLAST BV 34, the surface tension of the water is reduced, and so the cement, additives and fine
aggregates are saturated quicker. The cement paste mixes easier and the consistency is improved.
Test reports/certificates
The following test reports and certificates are available and can be requested if required:
Storage
- Test report about the initial test of the plasticizer
- Test reports about the compatibility of plasticizers with air-entraining agents
- CE certificate acc. to EN 934-2:2001, chart 2 (no. 1139-CPD-0008/03)
- Manufacturer’s declaration
Storage life: 1 year
Storage conditions: protect against frost impact and solar radiation, at temperatures below + 5°C,
crystallization is possible, this does not influence the effect when the additive is warmed
and stirred before application.
Delivery forms
Can: 25 kg
Barrel: 220 kg
Container: 1000 kg
Safety notes
Please be aware of the dangers, safety and disposal notes stated in the safety data sheet and on the binder
labels.
This data sheet replaces all other previous versions. The details contained in this information are based on the present state of knowledge and there is no claim to their
completeness. No legal claims can be derived from the data. The user has to make sure by tests and examinations that the product is suitable for the respective purpose. The
user has to comply with existing laws and other regulations. Last updated April 2010