REACTION TO FIRE CLASSIFICATION REPORT in accordance with ...

BUILDING RESEARCH INSTITUTE
FIRE TESTING LABORATORY
THE GROUP OF TESTING LABORATORIES
Accredited by the Polish Centre for Accreditation
Certificate of accreditation no. AB 023
FIRE TESTING LABORATORY (LP)
REACTION TO FIRE
CLASSIFICATION REPORT
in accordance with EN 13501-1:2007
Agreement no.: NP-512/C/09/MŻ
Ordering Party: KRONOPOL Sp. z o.o.
ul. Serbska 56
68-200 Zary
Prepared by: Fire Testing Laboratory
Building Research Institute
ul. Filtrowa 1
00-611 Warszawa
Name of product: Laminated chipboards
Classification report no.: NP-512/C/09/MŻ
Issue no.: 1 Copy no.: 1
Date of issue: 2009/04/01
This classification report has been made on five pages and may be used or copied
only in its entirety.
1. Introduction
The purpose of this classification report is to define the classification for laminated
chipboards in accordance with the procedures described in EN 13501-1:2007.
2. Detailed information on product under classification.
2.1. General provisions
The product has been defined as laminated chipboards.
FIRE TESTING LABORATORY
UL. KSAWEROW 21, 02-656 WARSZAWA
Phone: +48 22 8533427 +48 22 8482307
Fax: +48 22 8472311, email: fire@itb.pl
Member of
BUILDING RESEARCH INSTITUTE
www.itb.pl
The Branch of the Laboratory in Katowice
Al. Korfantego 191, 40-153 Katowice
Phone: +48 32 7302352, fax: +48 32
7302949 email: fire@itb.katowice.pl

2.2. Product description
Classification report no.: NP-512/C/09/MŻ 2/5
The product description is provided below.
Product description:
Laminated chipboards.
- thickness of 10 ÷ 38 mm.
The boards are produced in the facility located in Zary at 56 Serbska Street
3. Test reports and test results that are the basis for the classification
3.1. Test reports
Name of the
laboratory
Fire Testing Laboratory
ITB
Name of the
Ordering Party
KRONOPOL Sp. z o.o.
Test report no. Test method
LP-512.1/23-21/09 PN-EN ISO 11925-2
LP-512.2/23-22/09 PN-EN ISO 11925-2
LP-512.1/34-35/09 PN-EN 13823
LP-512.2/34-36/09 PN-EN 13823

3.2. Test results
Classification report no.: NP-512/C/09/MŻ 3/5
Test method Parameter Number
results
of tests Continuous Compliance
parameter –
mean (m)
parameters
LP-512.1/23-21/09 Flames spreading
(-) T
Fs ≤ 150 mm
6
30 sec. exposure
PN-EN ISO 11925-2
Drops/particles on flames
(-) N
LP-512.2/23-22/09 Flames spreading
(-) T
Fs ≤ 150 mm
6
30 sec. exposure
PN-EN ISO 11925-2
Drops/particles on flames
(-) N
LP-512.1/34-35/09 FIGRA 0,2 MJ 301,9 (-)
FIGRA 0,4 MJ 301,9 (-)
LFS < edge (-) T
THR 600s [MJ] 19,5 (-)
PN-EN 13823
SMOGRA [m2/s2]
TSR 600s [m2]
8,8
70,7
(-)
(-)
Drops/particles on flames
(-) N
LP-512.2/34-36/09 FIGRA 0,2 MJ 300,5 (-)
FIGRA 0,4 MJ 300,5 (-)
LFS < edge (-) T
THR 600s [MJ] 22,6 (-)
PN-EN 13823 SMOGRA [m2/s2] 12,6 (-)
TSR 600s [m2] 72,7 (-)
Drops/particles on flames
(-) N
(-): not applicable
T: YES
N: NO

Classification report no.: NP-512/C/09/MŻ 4/5
4. Classification and field of application
4.1. Classification provision
The classification has been provided in accordance with EN 13501-1:2007
4.2. Classification
In relation to reaction to fire, the laminated chipboards have received the following
classification:
Because of the smoke liberating the product has received additional classification:
D
S2
Because of the appearance of drops/particles on flames the product has received
additional classification:
d0
The format of classification in relation to reaction to fire for the construction materials
except floors and line products for thermal isolation of wires is as follows:
Fire properties Smoke liberation Drops on flame
D - s 2 , d 0
i.e.: D-s2,d0
Classification in relation to the reaction to fire: D-s2,d0
4.3. Field of application
This classification is binding for the following parameters that describe the product:
- laminated chipboards described in paragraph 2.2 of this classification report,
- laminated chipboards can be attached to the elements representing the class of
reaction to fire at least A2-s3,d0

5. Restrictions
Classification report no.: NP-512/C/09/MŻ 5/5
The classification granted shall remain in force until:
- the test method is changed,
- product norm or technical approval is changed,
the constructional and material changes do not exceed the limits of the field of
application described in paragraph 4.3.
This classification report has been issued in 2 copies. Certified copies can be issued
by the Fire Testing Laboratory ITB only upon the request of the Owner of the report.
This classification document does not constitute product approval or certificate.
Signed by Approved by
The Head of Fire Testing Laboratory
Mariusz Zolnik Miroslaw Kosiorek
Dr inz. Andrzej Kolbrecki