300519ED , Fine Finish Applications - Professional Painting ...

T E C H N I C A L S P E C I F I C A T I O N S
V I S - C O N 2 H P S P E C I F I C A T I O N S
Fluid Passage Area
Fluid Passage
Diameter
Length
Thermometer Range
Temperature Operating Range
Inlet
Outlet
Electrical Inlet
Dimensions
Weight
EFFECT OF TEMPERATURE ON VISCOSITY
VIS-CON 2 SELECTION CHART (275 BAR)
508m 2
9.7 mm
417 cm
0 – 120 °C
30° - 100° C
1/2" npt (f)
3/8" npt (f)
3/4" npt (f)
46 cm x 27 cm 22 cm
18 kg
V I S C O N ® H P S E L E C T I O N C H A R T (500 BAR)
PART
NUMBER
Viscosity: seconds with #2 Zahn cup
Typical spray
viscosities range
VOLTS WATTS AMPS
245863 240 4000 16.7
245864 480 4000 8.30
246254 380 4000 10.5
Approved EEx d II B T2 250°C
Approved to EN50014 and EN50018 for Hazardous Locations,
temp Code T2 (250°).
CSA Certified and FM Approved as flame proof for Class I,
Division 1, Group D Hazardous Locations, Temp Code T3 (392° F).
Note: use additional Heaters if necessary.
Heavy Lacquer
Medium Lacquer
Temperature (°C)
PART
NUMBER
Enamel
PART NUMBER DESCRIPTION VOLTS WATTS AMPS
222307 Bare Heater 240 2300 9.6
237947 with Cable 240 2300 9.6
FOR HAZARDOUS LOCATIONS FOR NON-HAZARDOUS LOCATIONS
VOLTS WATTS AMPS
245869 240 4000 16.7
245870 480 4000 8.30
246276 380 4000 10.5
Conforms to UL Std. 61010-1
CSA Std. 22.2 No. 1010-1-92
ACCESSORIES
221102 Hose (210 bar)
0.9 m x 1/2"
206661 70-210 bar
Fluid Pressure
Regulator
192585 Mounting Bracket
Cart Mounting
183484 Cart clamp*
183485 Mounting bar*
* Order 2 of each
110160 Power Cord Set,
600 V, 12 Amp.
206819 70-210 bar
Back Pressure
Valve
110009 Thermal lubricant
6.5 gram
246303 Cable Clamp Kit
Installation and service:
• Easy access to all
electrical connections
• Simple design, few
working parts to replace,
easy to service.
Consideration :
A heated spraying station
must be equipped with a
second, recirculating line
to prevent material stagnation
which could settle
and burn in the heater.
25