Pacific Lifting - O'Learys Material Handling Services

TAILGATE LIfTEr / WHEELCHAIr LIfTEr / DOCK LEVELLEr / CONTAINEr rAMP / LIfTEzy / TruCK MOuNTED CrANE 

WWW.AUSTLIFT.COM.AU

2 

TailgaTES 

CraNES 

WarEhOuSE 

SOluTiONS 

WaSTE 

MaNagEMENT 

CONTENTS: 

TUCKAWAY SERIES ................................................... 4 

TILT TAIL LIFT SERIES................................................ 7 

CANTILEVER LIFT SERIES ........................................ 10 

SLIDER SERIES ........................................................... 13 

RAIL LIFTER ........................................................... 16 

HALF GATE ............................................................... 18 

FEATURES &HOW TO SELECT ................................ 20 

AHT TUCKAWAY&CANTILEVER.................................. 23 

ZEPRO TILT................................................................... 25 

ZEPRO VAN LIFT ........................................................ 28 

ZEPRO SLIDER ........................................................... 29 

SIDE LIFT..................................................................... 30 

MINIGATE ................................................................... 32 

VAN STEP LIFT ......................................................... 36 

VAN SWING LIFT ........................................................ 43 

AUSTLIFT MICRO CRANE ...................................... 38 

PM CRANE ................................................................ 46 

DOCK SCISSOR LIFT ............................................ 47 

AUSTLIFT DOCK LEVELLER ............................... 48 

DOOR SEAL .......................................................... 51 

PALLET JACK ........................................................ 51 

BLUEGAINT DOCK LEVELLER............................ 53 

CONTAINER RAMP............................................... 56 

LIFTEZY ................................................................... 56 

MEZZ LIFT ............................................................... 57 

CELLAR LIFT .......................................................... 58 

SCISSOR LIFT ........................................................ 59 

GIRD LIFT ............................................................... 60 

BALE PRESS .............................................................. 62 

TERMS & CONDITIONS ............................................. 72

Why Choose AUSTLIFT: 

• Safety is our DNA when it comes to product design, Australian 

Standard 1148 is our guide line, we proof test each unit before 

delivery, to guarantee the safety. 

• The most in advanced technology plus a comprehensive product 

range to assure a value of choose AUSTLIFT. 

• A national wide, experienced after sales service team is a strong 

support for your business. 

Caring safe lifting and Providing Innovative Products. 

3

4 

TUCKAWAY SERIES 

Loading capacity: 500KG To 1000KG 

We have never stopped researching, developing and designing our Tuckaway range 

Tailgates. Today’s AustLift Tuckaway has pulled out all the stops when it comes to 

performance. The main draw is the push cylinder sits in the centre of the device, 

combined with automatic levelling design and full working sized platform, it is far and 

away superior in performance and features to others in the market place. 

AppLIcATIoNS: 

Steel platform fitted on tray top truck. 

Aluminium platform Tuckaway fitted on pantec truck. 

NeW DeSIGN

GeNeRAL FeATUReS 

• Harden & Tempered spring to assist folding and 

closing platform 

• Locked control station plus hand control pendant 

to suits to your operation. 

• Battery isolator switch with removable key 

for longer battery life. 

• A pair of Wider supporting arm providing a better 

load stability. 

eLecTRIcAL SpecIFIcATIoNS 

• All electrical components are sealed in a 

heavy duty plastic box. 

• New control eliminating troublesome 

electronic components. 

• All contactors are silver coated for maximise 

electrical current transparent 

• Available in 12V & 24 Volt. 

pLATFoRM MATeRIAL 

Steel, Aluminium, pVc 

opTIoNS 

Radio Remote control 

NeW pVc pLATFoRM 

LOADING AREA 

Opposition's Platform 

WHy LOADING SeLecT AREAAUSTLIFT: 

AUSTLIFT Platform 

Push Cylinder- AUSTLIFT Product 

Hydraulic Oil 

Pull Cylinder- Opposition's Product 

To answer the question of how to reduce the Tailgate weight for achieving trucks 

payload, we have chosen a new material: pVc Form Board Pull with Cylinder- coated Opposition's anti Product slip 

paint. (patent pending) to make our platform. It can easily fold up with one hand, 

due to significant reduce the weight – it feels incredibly light in the hand, but still 

maintains a reassuring robustness. 

Hydr 

Oil 

More power than a pull cylinder 

Increased durability & reliability. 

LOADING AREA 

Opposition's Platform 

LOADING AREA 

AUSTLIFT Platform 

Hydr 

Oil 

Push Cylinder 

flat Deck Platform 

Maximised Loading Area. 

Suit more applications. 

Push Cylinder- AUSTLIFT Product 

Hydraulic Oil 

5

6 

Model 

Model A (Min) B C D (Min) E (Max) 

AL-TK500 1800 50 700 800 1100 

AL-TK750 2100 50 1400 1000 1300 

AL-TK1000 2100 50 1400 1000 1300 

HoW To USe: 

Loading 

Capacity 

TUcKAWAy SpecIFIcATIoNS 

unit 

Weight 

Steel 

INSTALLATIoN ReQUIReMeNTS 

FIXED STATION 

unit 

Weight 

Aluminum 

Platform 

W/L 

Load 

Centre 

Trolley 

Stops 

floor Height 

Min/Max 

Tuckaway kg kg Kg mm mm mm 

AL-TK500 500 190 170 1600/1000 500 opt 750/1100 

AL-TK750 750 280 250 1800/1200 500 opt 900/1400 

AL-TK1000 1000 300 265 1800/1200 500 opt 900/1400

Fitted 1T Tilt 

Fitted 2T Tilt 

TILT TAIL LIFT SERIES 

Loading capacity: 500kg – 4,000kg 

our 3t Tilt is the first Tailgate in market with a 3t lifting capacity. 

The new mechanical design which has multiple scalar ribs hidden behind the 5 mm 

check plate allows forklifts to drive over. The push cylinders made the tailgate working 

comfortably, the trolley stops and returning tube are a standard feature. With up to 2.7M 

long platform to be used as rear door, it’s certainly top of its game. 

AppLIcATIoNS: 

7

8 



• High-quality power pack 

Aluminium or Steel 

• Steel platform or aluminium platform. 

• platform tilt adjustable at any position 

• Low maintenance bushes fitted to all pivot points 

• Level ride platform with Automatic tilt to ground at ground level 

• Hose burst stoppers 

• Trolley stoppers optional/standard 

• Three button control pendant 

• Lockable fix control station 

• Battery Isolator switch 

• preset pressure compensating flow lowing control valve 

• Wide frame lift mechanism improves load stability 

• 5T Rollover capacity available on 3T and 2T steel platforms (optional) 


• Waterproof control box with power switch 

• Wander lead with spiral cable 

• control unit without electronic components 

• Starter solenoid with silver contact 

• Available in 12 or 24 Volt 

AL-TT4000 comes with hydraulic out riggers

Model 

Loading 

Capacity 

unit 

Weight 

Steel 

*This unit comes with hydraulic out riggers. 

SpecIFIcATIoNS 

unit 

Weight 

Aluminium 

Platform 

W/L 

Load 

Centre 

Trolley 

Stops 


floor 

Height 

Min/Max 

Add To 

Length 

Min/Max 

TILT kg kg kg mm mm mm mm 

AL-TT500 500 315 205 1800/1600 600 opt. 750/1050 300 

AL-TT750 750 495 364 

2000/1650 

2470/2000 

600 opt. 900/1050 300 

AL-TT1000 1000 495 364 2000/1650 600 opt. 900/1350 280/300 

AL-TT1500 1500 770 540 

AL-TT2000 2000 770 540 

AL-TT3000 3000 790 560 

AL-TT4000* 4000 1160 N/A 

2470 (w) / 

2300, 2400, 

2500, 2600 

2470 (w) / 

2300, 2400, 

2500, 2600 

2470 (w) / 

2300, 2400, 

2500, 2600 

2470(w)/ 

2500,2600 

600 Std. 900/1350 280/325 

600 Std. 900/1350 280/325 

600 Std. 900/1350 280/325 

600 Std. 900/1350 310/330 

Model A / B C (Max) D (Min) E (Max) f (Min) 

AL-TT500 DepeNDING oN pLATFoRM SIZe 100 NIL 1000 800 

AL-TT750 DepeNDING oN pLATFoRM SIZe 100 800 1000 1000 





9

10 

CANTILEVER LIFT SERIES 


Austlift cantilever Tailgates are designed and manufactured for Australian conditions. 

It is suitable for White Goods, Tyres and small parcels. The larger capacity units are 

design for palletised applications. It features push cylinders for optimum safety 

and lower running pressures.



• High-quality power pack 

Steel or Galvanised Mesh 

• Spring assisted platform opening 

• Low maintenance bushes fitted to all pivot points 

• All pins are galvanised 

• Warning labels 

• Mechanical travel lock 

• Level ride platform with Automatic tilt to ground 

at ground level 

• Hose burst protection 

• Mesh or steel platform construction 


• preset pressure compensating flow lowing control valve 

• Wide frame lift mechanism improves load stability 

• Self closing mechanism 

• ALcL500T twin cylinders version available for truck need install tow bar. 


• Waterproof control box with power switch 



• Starter solenoid with silver contact 

• Two button control pendant 



11

12 

Model 

Loading 

Capacity 

FIXED STATION 


Model A/B D (Max) mm E (Min) mm 

ALcL500 DepeNDING oN pLATFoRM SIZe 700 1000 

ALcL500T DepeNDING oN pLATFoRM SIZe 700 1000 



cANTILeVeR SpecIFIcATIoNS 

unit 

Weight 

Steel 

unit 

Weight 

Mesh 

Platform 

W/L 

Load 

Centre 

Trolley 

Stops 

floor 

Height 

Min/Max 

RHS 75x75 

Add To 

Length 

Min/Max 

cantilever kg kg Kg mm mm mm mm 

ALcL500 500 223 215 1800/1200 500 opt 750/1050 135/211 

ALcL500T 500 235 225 1800/1200 500 opt 750/1050 135/211 

ALcL500H 500 200 190 900x1200 500 opt 750/1050 135/211 

ALcL750 750 310 300 2000/1400 500 opt 900/1350 135/211 

ALcL1000 1000 336 328 2000/1400 500 opt 900/1350 135/211

SLIDER SERIES 


Austlift Slider Tailgates are designed and manufactured for Australian conditions. 

They offer customers the ultimate in lifting capacity. 

13

14 


• Aluminium platform 

• 2 single acting lift cylinders 

• Sliding tubes in hard chromed 

steel with mounting plates adjusted 

to the chassis (truck or trailer) 

• platform tilt adjustable at any position 

• Low maintenance bush fitted to 

all pivot points 

• Rollers to protect the platform 

on the ground 


• Level ride platform with Automatic 

tilt to ground at ground level 


• Trolley stoppers (optional) 

• Self lubricating bushes 

• preset pressure compensating 

flow lowing control valve 

• Wide frame lift mechanism 

improves load stability 


Aluminium 

HyDRAULIc SpecIFIcATIoNS 

• powder-coated power pack casing 

• Steel oil tank with filter 

• oil pressure controlled by 

pressure relief valve 

3000KG Tilt Slider 


• external controls in sealed metal box 

• Battery switch with removable key 

• 2-handed operation for all functions 

from the external controls 

• control unit without electronic 

components 


with special cable 



• Available in 12 or 24 Volt

Model 

Loading 

Capacity 

SLIDeR SpecIFIcATIoNS 

unit Weight 

Aluminium 

Platform 

W/L 

Load 

Centre 

Trolley 

Stops 

floor 

Height 

Min/Max 

Slider kg kg mm mm mm 

ALSL1500 1500 480 2300/1610* 600 ST 900/1500 

ALSL2000 2000 510 2300/1610* 600 ST 900/1500 

ALSL3000 3000 690 2450/1800* 750 ST 960/1460 

ALSLTILT 

SLIDeR 3000 3000 690 2450/2000* 750 ST 960/1460 

*Up to 2100mm platform length for double fold platform Slider. 

Model A 


B 

(Min) 

C 

(Max) 

D 

(Max) 

E 

(Min) 

f 

(Min) 

G 

(Min) 

ALSL1500 No LoWeR THAN cHASSIS 300 100 1000 1600 2000* 960 



15

16 

RAIL LIFT SERIES 

Loading capacity: 500KG-2000KG 

Austlift Rail Lifters offer customers versatility for a variety of lifting positions. It can be 

lifted up to 3M high for multiple floor level trucks. 

our unique designs maintain a constant horizontal or tilting platform position for 

greater versatility and is suitable for lifting personal and product due to our fall arrester 

safety system.

FeATUReS 

• Level ride platform with tilting cylinders 





• preset pressure compensating flow 

lowering control valve 

• chromed cylinder piston rods 

• powder-coated power pack casing 

• Steel oil tank with site glass 

• oil pressure controlled by 

pressure relief valve 

• cylinders equipped with synthetic 

gaiters and lubrication 



• external controls in sealed metal box 

• Battery isolating switch with removable key 

• 2-handed operation for all functions 

from the external controls 


• Starter with silver contact (200AMp) 


Steel, Mesh or Aluminium 

opTIoNAL 

Trolley stoppers 

Model 

Lifting 

Capacity 


Max. lifting 

height (mm) 

Platform Size W 

x L mm 

Weight (kg) Voltage 

ALRL500 500kg 900-3000 optional 990* 12/24v 

ALRL1000 1000kg 900-3000 2470 x 2000 1200* 12/24v 

ALRL2000 2000kg 2300mm optional * 12/24v 

* Weights are a guide only, will vary due to different vehicle widths and operating heights. 

Units are custom made to customer specifications. 

17

18 

HALF GATE

HALF GATE 

AUSTLIFT Half gate with hand rail and trolley stoppers. 

19

20 

AUSTLIFT TAILGATES FEATURES: 

Without Automatic 

Levelling System 

a B 

Automatic 

Levelling System 

• Automatic levelling system 

(For Tuckaway and cantilever) 

• Quality platform 

A: Sandblasted steel platform with 

Two pack ( polyurethane) paint 

B: Anodised aluminium platform 

• chrome plated pins 

• Trolley Stoppers 

Standard on 2t,3t

• Burst Valve, for fall protection more safety 

• Rexroth valve pressure compensation valve 

• permaglid Bush 

• Radio Remote control (optional) 

• Lockable control Box with removable Keys 

• Simplified design on power pack and 

control Box to avoid potential problems. 

21

22 

SWING LIFT ✔ ✔ 

FoR UTe 

MINIGATe 

✔ ✔ ✔ 

ReAR SWING 

LIFT 

✔ ✔ ✔ ✔ 

VAN SWING LIFT ✔ ✔ ✔ 

VAN TRoLLey 

LIFT 

✔ ✔ 

VAN SIDe LIFT ✔ ✔ ✔ ✔ 

VAN STep LIFT ✔ ✔ ✔ ✔ ✔ ✔ 

VAN LIFT ✔ ✔ ✔ ✔ 

GRID LIFT ✔ ✔ 

MINIGATe FoR 

LIGHT TRUcK 

✔ ✔ ✔ ✔ 

SIDe LIFT ✔ ✔ ✔ ✔ ✔ ✔ 

RAIL LIFT ✔ ✔ ✔ ✔ ✔ 

SLIDeR ✔ ✔ 

TILT Type ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ 

cANTILeVeR ✔ ✔ ✔ ✔ ✔ ✔ 

TUcKAWAy ✔ ✔ ✔ ✔ ✔ ✔ 

WHITe 

GooDS 

FURNITURe 

TRUcK HIRe 

coMpANy 

& GoV DepT 

MINING 

INDUSTRIAL 

FLoWeR & 

AGRIcULTURe 

INDUSTRy 

GAS BoTTLe 

DeLIVeRy 

TyRe 

INDUSTRy 

POST 

oFFIce & 

LIGHT ITeMS 

BAKeRy 

INDUSTRIAL 

cLeANING 

BULKy GooDS 

TRANSpoRT 

coUNcIL 

BUILDING 

coNSTRUcTIoN 

TO CHOSE A TAILGATE BY YOUR BUSINESS

Technical Specifications 


Material Handling Material Services Handling Pty Ltd Services P 

6 Montgomery Way6 

Montgom 

Malaga WA 6090 Malaga W 

Tel: 08 9248 6674 Tel: 08 92 

Material www.olearys.com.au 

Handling Services www.olearys Pty 

Tuckaway Tuckaway (ATK) Series (ATK) Series 

6 Montgomery 

Malaga WA 

AHT are the aluminium AHT are specialists the aluminium when itspecialists comes to truck whentailgate it comes hoists. to truck They tailgate are the hoists. only tailgate They aremanufacturer the only tailgate inTel: 

manufact 08 9248 

the world to offer athe fullworld aluminium to offer tailgate a full aluminium hoist, not just tailgate an aluminium hoist, not platform. just an aluminium platform. 

www.olearys.co 

The ATK model requires The ATK a small model bridging requires plate a small to bebridging set intoplate or added to betoset theinto truck or added tray. to the truck tray. 

AHT are the aluminium specialists when it comes to truck tailgate hoists. They are the only tailgate manufacture 

the world to offer a full aluminium tailgate hoist, not just an aluminium platform. 


Tuckaway (ATK) Series 

ATK 1000 ATK 1000 

1tonne Capacity 1tonne Capacity 

The ATK model requires a small bridging plate to be set into or added to the truck tray. 

ATK 1000 

1tonne Capacity 

23

24 

Cantilever 

Cantilever 

(PKL) 

(PKL) 

Series 

Series 

Material Handling Services Pty L 

Material Handling Services Pty Ltd 

6 Montgomery W 

6 Montgomery Malaga Way WA 60 

Malaga WATel: 6090 08 9248 66 

Tel: 08 www.olearys.com. 

9248 6674 

www.olearys.com.au 

This superior and cost effective lift is designed for small Pick-Up trucks. It is extremely light in weight 

This superior (120kg) and cost and will effective be installed lift is designed directly onto for small the bed Pick-Up level. trucks. No need It is to extremely change thelight lights, in weight license plates or 

(120kg) and underrun will bebeam. installed Thedirectly tow baronto is not theaffected bed level. by the No installation. need to change the lights, license plates or 

underrun beam. The tow bar is not affected by the installation. 

- The complete lifting mechanism and the platform are made from 

- The complete highlifting strength mechanism aluminium. and the platform are made from 

high strength aluminium. 

- So the Pick-Up lift is extremely light in weight: 120kg 

- So the Pick-Up lift is extremely light in weight: 120kg 

- Platform size: 1430x1137mm (WxD) 

- Platform size: 1430x1137mm (WxD) 

- The load capacity is 300kg-400kg with load centre point of 

- The load capacity 500mm. is 300kg-400kg with load centre point of 

500mm. 

- Very small and compact 

- Very small and compact 

- Installed into the main tube, keeping it completely safe from the 

- Installed into weather. the main tube, keeping it completely safe from the 

weather. 

- Power consumption is very low 

- Power consumption is very low 

- Sound proof 

- Sound proof 

- Two battery cables (Plus and Minus) 

- Two battery cables (Plus and Minus) 

- Easy & quick installation 

- Easy & quick installation 

- Long life - low maintenance 

- Long life - low maintenance

A light weight + lift with lifting capacity of 1000kg. Load 

centre 600mm. Fitted with 3 piece aluminium bumper bar 

and standard with aluminium platform. 

This is an ideal hoist for a wide range of uses for skids, 

trolleys and light pallet loads with manual pallet jacks for 

small to medium trucks. 

The hydraulic power pack is separately mounted to 

reduce lifting beam and reduce required overhang . 

Zepro tailgates are compliant with the European 

Standards EN-1756-1 2001 which are specific for truck 

tailgates unlike Australian Standard AS1418.8. Zepro is 

also the only European tailgate manufacturer to be 

certified to ISO 9001 and ISO 14001. 

Optional Wireless Remote Control 

available on all Zepro models. 

Zepro Model RZU 100 – 132 

2 Z10/Z15/Z20 


6 Montgomery Way 

Malaga WA 6090 

Tel: 08 9248 6674 



Width of chassis 

RZU 100 -132 

715 to 860mm 

Arm length 750mm 

Cylinders 

2 x (Single acting one-speed tilt adjustable tilt angle) 

2 x (Single acting one- speed lift) 

Max load distance 600mm 

Min battery capacity 170Ah 

C max 620mm 

C min 370mm 

E max 

Platform lengths (Max) 

1320mm 

Aluminium 

Weights 

1800mm 

Frame 197kgs 

Aluminium Platform x 2490mm wide 129kgs 

25

26 

Zepro Model ZLU 75-110 

The ZLU75 features single acting lift and tilt cylinders. The push 

rods are protected against corrosion with 

zinc iron treatment and the 

piston rods are coated 

Corr-i-Dur ®. 

Threaded cylinder tops seal effectively against water and dirt 

ingress. 

Optional Wireless Remote control 


Optional load rated tow bar available. 




Tel: 08 9248 6674 


The ideal lightweight tailgate hoist for small to medium 

trucks with all the features you will need. 

Ideally suited for small crates,skids, fridges etc. 

This model is not recommended for use with standard 

pallets and pallet trolleys. 



tailgates unlike Australian Standard AS1418.8. 

Zepro is the only European tailgate manufacturer to be 



Maximum Lifting Capacity 750kg 

Lift type Standard light duty 

Load centre 600mm 

Maximum platform length Aluminium platform 1600mm x 2200x 30mm thick 

Tilt Cylinders 2 

Lift Cylinders 2 

Auto tilt Hydraulic auto tilting function 

ZLU-75-90 

Overhang required 384-554mm 

Weight Lift 141kg, Platform 58-72kg 

Height of Truck 900mm 

ZLU-75-110 


Weight Lift 146.5kg, Platform 58-72kg 

Height of Truck 1100mm

ZHD 2500-150 

Maximum lifting capacity: 2500 kg 

Maximum lifting height: 1500 mm 

Operation voltage: 24V 

Lift cylinders: 2 

Tilt cylinders: 2 

solid cylinders with stainless 

steel piston rods 

Load centre of gravity: 1000 mm 

Platform, reinforced: Steel 

Weight: 

Option: 

Lift chassis 422 kgs 

steel platform 2000 mm 

365 kgs 

Bellows 

27 

ZEPRO IS A CARGOTEC BRAND

28 


Maximum lifting capacity 500kg 

Loading capacity 500kg 


Lift type Standard for vans-light duty 


Maximum platform length Aluminium platform 1600mm, 30 flat 

Tilt Cylinders 1 

Lift Cylinders 2 

Weight Lift 96kg, Platform 47-59kg 

Maximum Height of Van Floor. 500mm 




Tel: 08 9248 6674 


Zepro Model ZV50 

Specifically designed for installation on medium to large 

vans, the ZV-50 has market leading loading capacity and 

installation flexibility. 



tailgates unlike Australian Standard AS1418.8. 

Zepro is the only European tailgate manufacturer to be 


Optional Wireless Remote control available on all Zepro 

models.

Optional Wireless Remote control 



Zepro Slider Models ZSS250 

Maximum lifting capacity 2500kg 

Lift type Slider 


Maximum platform length 1976mm 

Tilt Cylinders 2 Double acting one speed adjustable tilt. 

Lift Cylinders 2 single acting one speed 

Auto tilt Hydraulic auto tilting function 

ZSS-250-135 


Weight Lift 403kg 


ZSS-250-155 


Weight Lift 412kg 





Tel: 08 9248 6674 


This modern slider model range includes the use of 

aluminium profiles for oil transport reducing the hose lengths. 

High tensile steel and powder coating are offered as 

standard for all steel components. A hydraulic motor drives 

the slide system and gives the smoothest most reliable 

extend / retract movement in the industry. The ZSS model 

range is optimized for high C measure and maximizing 

ground clearance. This is the heaviest duty slider in the 

ZEPRO range. 

Zepro tailgates are compliant with the European Standards 

EN-1756-1 2001 which are specific for truck tailgates unlike 

Australian Standard AS1418.8. Zepro is also the only 

European tailgate manufacturer to be certified to ISO 9001 

The hydraulic unit is placed in front of the support frame to minimize 

the vertical height of the tail lift. 

Aluminium profiles are used for hydraulic fluid 

transport which reduces hydraulic hose use. 

The ZSS250 features double acting tilt 

cylinders and single acting lift cylinders. The 

push rods are protected against corrosion 

with zinc iron treatment and the piston rods 

are coated Corr-i-Dur ®. Threaded cylinder tops seal 

effectively against water and dirt ingress. 

29

30 

SIDE LIFT 

MoDeL: AL-SL250 

Designed for 3.5 to 17 tonne vehicles, Side Lift enables deliveries to be made directly onto 

the kerb side, dramatically reducing the space required to park and enabling more even 

distribution of the load, thereby reducing route planning time and risks of axle overload.

FeATUReS 

• Hydraulically powered for a smooth 

controlled operation 

• easy installation, no welding required 

• 12v or 24v versions available 

• Minimal reduction in vehicle payload 

• Handles loads up to 250kg 

• Remote and static controls 

• In cab isolator and warning buzzer 

• Hydraulic overload protection 

opTIoNS 

• Radio remote control 

• off-set platforms 

• Battery protection 

AppLIcATIoNS 

• Highways 

• construction 

• council 

• Local authorities 

• Tyre industry 

31

32 

MINIGATE FOR UTE. 4x4 

MoDeL: AL-MG500 

FeATUReS 

• excellent off-road ground clearance 

• Specifically designed to suit pickup 

and dropside vehicles 

• No under-slung columns, ropes or chains 

• cantilever action means standard tow bars 

can be fitted 

• Low self-weight maximises payload 

• Standard 500kg MWL 

• A wide range of platform materials 

are available including steel, mesh and aluminium 

• A wide range of platform sizes tailored 

to suit your requirements, including folding 

platforms 

Rear loading redefined 

A lightweight and compact lifting 

platform for loading 4x4 pickups 

and Land Rovers.

opTIoNS 


• Bespoke platform sizes 

• Folding or drop-in guard frames 

• Manual back-up hand pump 


AppLIcATIoNS 

• Highways 


• council 

• Railways 



Aluminium, Steel or Mesh 

• 750mm steel platform 145kg 

• 800mm galvanised steel mesh platform 138kg 

• 600mm aluminium platform + 200mm toe 135kg 

33

34 

Light on weight, heavy on features 

MINIGATE FOR LIGHT TRUCK 

MoDeL: AL-MT500 

A lightweight and compact lifting platform for 

loading pickups, Luton and box vans. 

FeATUReS 

• Low self weight maximises payload 

• Standard 500kg MWL 

• Specifically designed to suit pickup 

and dropside vehicles 

• No under-slung columns, ropes or chains 

• cantilever action means standard tow bars 

can be fitted 

• A wide range of platform materials 

are available including steel, mesh 

and aluminium 

• A wide range of platform sizes tailored 

to suit your requirements, including 

folding platforms


Aluminium, Steel or Mesh 

• 750mm steel platform 150kg 

• 800mm galvanised steel mesh platform + 200mm toe 140kg 

• 600mm aluminium platform + 200mm toe (illustrated) 138kg 

• 800mm aluminium platform + 200mm toe 143kg 

• 800mm aluminium platform (including 200mm fold) 

+ 200mm toe 145kg 

• 1000mm aluminium platform (including 200mm fold) 

+ 200mm toe 153kg 

opTIoNS 


• Bespoke platform sizes 

• Upgrade up to 550kg MWL 

• Folding or drop-in guard frames 

• Manual back-up hand pump 


AppLIcATIoNS 

• Highways 


• council 


35

36 

VAN STEP LIFT 

MoDeL: AL-VT250 

FeATUReS 

• external mounting allows unhindered access 

and means that internal load space can be 

utilised to its maximum 

• Hydraulically powered for a smooth controlled 

operation 

• easy installation, no welding required 

• 12v or 24v versions available 

• Loading capacity 250kg 

• Minimal reduction in vehicle payload 

• Remote and static controls 

• In-cab isolator and warning buzzer 

• Hydraulic overload protection 

• Anti-roll-off toes and bridging flaps 

on multifold platforms where applicable 

opTIoNS 

• customized platform sizes 


• Towing bracket 

• MWL upgrade 

• Side rails 

• Reversing sensors 

• Battery protection

AppLIcATIoNS 

• Highways 


• council 

• Fire & rescue 

• Healthcare 

• plumbers & Builders merchants 

pLATFoRM RANGe 

• 825mm x 315mm step only 80kg 

• 825mm x 615mm single fold 95kg 

• 1200mm multifold (as illustrated) 105kg 

A unique lifting platform 

that replaces the rear step 

for loading most types of van. 

1200 

315 300 220 250 

1205 

375 

1030 

200 

37

38 

MICrO CrANES NEW 

Made in Italy

MICrO CrANES 

*optional Manual extensions available. 

AL130 

Max. Lifting Moment: 12 kNm(1.2 mt) 

Max. Lifting capacity: 1130 kg 

Max. Hydraulic outreach: 2.7 m 

Max. outreach: 3.5 m 

Slewing Angle: 340° 

Slewing Torque: 3.2 kNm (0.33 mt) 

operating pressure: 19 Mpa (190 bar) 

Recommended pump capacity: 6 L / min 

Hydr. Boom extensions 2 3 

Max. outreach 2.7 m 3.5m 

First Manual extension 3.5m - 

crane Weight 165 Kg 187 Kg 

First Manual extension 177 Kg - 

AL130* NO CE AL130* CE 

39

40 

MICrO CrANES AL230 

*optional Manual extensions available. 

Max. Lifting Moment: 22.8 kNm (2.3 mt) 

Max. Lifting capacity: 1820kg 






Recommended pump capacity: 6 L/min 


Max. outreach 3.1m 4.1m 


Second Manual extension 5.1m 5.1m 



Second Manual extension 257Kg 271Kg 

AL230* CE AL230* NO CE

MICrO CrANES AL330 

 

 

 

 

 

 

 

 

 

 

 

2050kg 1130kg 820kg 630kg 500kg 380kg 

20.1KN 11.1KN 8KN 6.2KN 4.9KN 3.7KN 

 

 

Max. Lifting Moment: 31 kNm (3.2mt) 

Max. Lifting capacity: 2050 kg 






Recommended pump capacity: 8 L / min 


Max. outreach 3.68m 4.68m 


Second Manual extension 5.6m 5.6m 

Third Manual extension 6.68m 6.68m 



Second Manual extension 350Kg 360Kg 

Third Manual extension 360Kg 370Kg 

 

 

 

V3 

 

- Traglastdiagramm 

 

- Lifting capacity diagram 

 

 

 

- Diagramme de capacité 

 

 

 

 

 

V2 

- Traglastdiagramm 

- Lifting capacity diagram 

 

- Diagramme de capacité 

 

 

 

AL330-2 NO CE AL330-3 NO CE 

 

 

 

 

 

 

 

2020kg 1130kg 800kg 620kg 500kg 380kg 

 

19.8KN 11.1KN 7.9KN 6.1KN 4.9KN 3.7KN 

 

Konstruktionsänderungen vorbehalten, fertigungstechn. Toleranzen müssen berücksichtigt werden. 

 

Konstruktionsänderungen vorbehalten, fertigungstechn. Toleranzen müssen berücksichtigt werden. 

Einstufung: H1/B3 nach DIN15018 

Einstufung: H1/B3 nach DIN15018 

 

Subject to change, production tolerances have to be taken into account. classification: H1/B3 in DIN15018 

Subject to change, production tolerances have to be taken into account. classification: H1/B3 in DIN15018 

 

Sous reserve de modifications de conception. Les tolerances relatives a la technique de production doivent etre prises en consideration. 

 

Sous reserve de modifications de conception. Les tolerances relatives a la technique de production doivent etre prises en consideration. classement: 

H1/B3 en mesure DIN15018 

classement: 

H1/B3 en mesure DIN15018 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

41

42 

Crane Outriggers 

Single Manual leg: ALMS006.140M 

Model 

Ton/ 

Mt 

Max 

load Optional 

KN 

ALMS006.280 3 - 6 12.6 I R PSF PSP ce 

A 

mm 

B 

mm 

b 

mm 

h 

mm 

C 

mm 

D 

mm 

r PSf-PSP CE 

I: Hidropilotate valve 

R: Rotating cylinder 

pSF: Iron swivel peg 

Double leg: ALMS006.280 

E 

mm 

DIMeNSIoNS 

f 

mm 

opTIoNAL 

STD 

mm 

Single leg: ALMS006.140 

L 

Short 

mm 

1800 2800 80 120 425 330 70 35 540 440 90 

Pads Plates for Outriggers 

Model Dimensions Weight Max Load 

ALMp300-30 300x300x30mm 3 kg 6000kg 

ALMp500-60 500x500x60mm 15 kg 20000kg 

Weight 

kg 

pSp: plastic swivel peg 

ce: Interlock system installed

VAN SWING LIFT 

MoDeL: AL-VS250 

FeATUReS 

• Lifts up to 250kg 

• overload device – will not lift more than MWL 

• Low crane weight of approximately 31-34kg 

• compact design maximising vehicle floor space 

• Fully demountable 

• can be re-fitted to new replacement vehicles 

• easy to operate 

• easy to maintain with long service intervals 

opTIoNS 

• customized boom length to suit application 

• 12v or 24v 


• corner bracket for mounting direct to 

a pick-up vehicle headboard 

• cranked hinge available 

allowing even greater flexibility 

• Additional pillar height 

• extra rope length (9m/30’ up to 250kg) 


• Lifting accessory kit 

43 

AppLIcATIoNS 

• Highways 


• council 


43

44 

REAR SWING LIFT 

MoDeL: AL-SV500 

FeATUReS 

• Lifts 500kg in all configurations 

of boom position 

• Remote control 

• easily demountable 

• Low crane weight from 44kg (pillar is extra) 

• Above or below floor socket mounting 

for pickups 

• overload protection 

• compact design folds away when not in use 

• Manual boom extension with three 

height settings 

• easily installed at our own premises, on site 

or by a vehicle body builder 

AppLIcATIoNS 


• council & waste management 


opTIoNS 

• 12v or 24v operation 

from vehicle battery 

• Fitting kit 

• extra rope length up to 12m/40’ 

• Manual stabiliser leg 


• Additional pillar height 


• Lifting accessory kit

46 

pacific Lifting is the 

Australian distributors for pM crane 

a LEADING ITALIAN BrAND 

Truck mounted knuckleboom 

crane offering supply only /or 

supply and fit from the 

various branches 

throughout Australia. 

Models available from 

1.0T/M to 60T/M

DOCK SCISSOR LIFT 

Load capacities: Variable upon request (100kg -50T) 

We offer a range of sizes for scissor lifts and custom 

make the lifts to suit your needs. 

47

48 

DOCK LEVELLER 

FEATURES: 

Italian power pack 15T Loading capacity easy Maintenance 16mm one piece 

Lip plate & 8mm 

check plate platform 

• 

• 

• 

• 

16mm LIp Grade GR-250 material with Laminated Backing plate 150mm x 10mm 

Displacement cylinders used in both lift and lip with large rods made in our cylinder 

factory using SKF brand seals from Germany standard sizes off the shelf 

25mm Hard chrome pins used material K1045 perma glide bushes in all cylinder 

pivot points, standard bushes off the shelf items cBc Bearings Australia wide 

Brevini powerpack from Italy, parts available Australia wide, Standard motor start 

contactors and standard push button control all parts Australia wide.

• 

• 

• 

• 

Developed over 15 years, AUSTLIFT Dock Leveller has been innovative in design. 

AUSTLIFT Dock leveller is a proven design and a cost effective Dock Leveller. 

The cylinder has to be tested 50,000 cycles before use. 

Sand blasted and two pack paint make it suitable for any wet working condition. 

49

50 

SpecIFIcATIoNS:

DOOR SEAL 

We have carefully chosen a high density poly sponge as the core material 

and the covers are made from UV proof, heavy duty tarpaulins. 

The seal has past fatigue test to Australian Standards, 

It can withstand more than 50,000 squashes at less than 5% distortion of its size. 

It is one of the best in market. 

ACCESSORIES 

Traffic Light Truck Restraint 

PALLET JACK 

FeATUReS: 

pallet truck with brake system can conveniently cease the truck an navigate ramps. 

MoDeL: PL-BSB (With Hand Brake) 

Specifications: 

Model PL-BSB 

capacity 2500KG 

Lowered fork height 85/75mm 

Steering wheel φ200/φ180mm 

Fork wheel single φ80x93/φ74x93 

Fork wheel tandem φ80x70/φ74x70 

Max. lift height 200/190mm 

Total height 1224mm 

overall length 1533/1603mm 

Fork length 1150/1220mm 

Width overall forks 550/685mm 

Ground clearance, 

40/30 

centre of wheelbase 

Aisle width for pallets 1000x1200 crossways 

51

52 

MoDeL: PL-BS 

FeATUReS: 

Most standard and popular model with capacity 2500-3500 kgs. 

complete pump design with reliable leak-proof pump eliminating maintenance and 

extending the service time. 

210 steering arc,and small turning radius. 

Fork lowering speed is controllable,operated by hand control and foot pedal. 

ergonomic rubber wrapped handle,which is comfortable and convenient to operate. 

entry/exit Roller,more freely travel. 

equipped with over-load valve,with long service time. 

ergonomic Large Rubber handle with three control lever. 

opTIoN: 

(1) Nylon wheel, polythene wheel,rubber wheel,single fork roller or tan dem 

fork rollers. 

(2) Fork length:800mm,900mm,1000mm 

(3) Foot pedal release. 

h14 

Model 

capacity 

Lowered fork height 

Steering wheel 

Fork wheel single 

Fork wheel tandem 

Max. lift height 

Total height 

overall length 

Fork length 

Width overall forks 

m2 

53 

Ground clearance, centre of wheelbase 

Aisle width for pallets 1000x1200 crossways 

Aisle width for pallets 800x1200 lengthways 

Turning radius 

Service weight 

l1 

h13 

h3 

( MM ) 

Q(kg) 

h13(mm) mm 

mm 

mm 

h3(mm) h14(mm) l1(mm) l(mm) 

b5(mm) m 2(mm) 

Ast(mm) Ast(mm) W a(mm) 

kg 

100 

Wa 

Ast 

2500/3000 

85 

φ200 

φ80x93 

φ80x70 

200 

1224 

1483/1533/1603 

1100/ 1150/1220 

520/550/685 

32 

1733/1733/1803 

1883/1783/1803 

1216/1266/1336 

65-80 

l 

BF 

100 

160 

b5 

1KG=2.205LB 1INcH=25.40MM 

2500/3000 

75 

φ180 

φ74x93 

φ74x70 

190 

1214 

1483/1533/1603 

1100/ 1150/1220 

520/550/685 

22 

1733/1733/1803 

1783/1783/1803 

1216/1266/1336 

65-80

W O R L D C L A S S , W O R L D W I D E . 

W O R L D C L A S S , W O R L D W I D E . 

2011 Blue Giant Equipment Corporation 

53 

Dock Levelers 

Vehicle Dock Restraints Levelers 

Vehicle Dock Restraints Lifts 

Seals and Dock Shelters Lifts 

Seals and Accessories Shelters 

Accessories

54 

Inflates around the trailer 

providing an effective 

seal for a variety of 

trailer sizes 

The Series IS401A’s inatable, air-tight seal is the solution for any 

door opening required for a wide variety of trailer widths and 

heights up to 3048 W x 345 4 H. 

“RipStop” fabric provides greater resistance to wear 

and tear normally found on standard truck shelters. It also blocks 

foul weather, insects, dust, and dirt, thus giving you years of trouble 

free service while saving you money on energy costs. Inatable 

truck shelters also help productivity by increasing safety, protecting 

personnel, products, and equipment. 

Series IS401A standard dimensions for door openings up to 

3302 W x 335 3 H are 3606 W x 3708H (O.D.) with a 610 projection, 

1220 header air bag drop, and two (2) vertical air bags (one per side) 

with 610 inward projection when inated. 

Seals trailers 3200 to 4115 high from grade with a dock height of 1220. 

Also seals trailers with widths from 2286 W. 

16 oz. “RipStop” fabric developed specically for inatable 

units gives years of trouble free service. 

Can be part of a totally automated dock loading system. 

Gives full access to trailer opening. 

45 7-5 08 projection in front of the dock bumper face is 

recommended to provide a proper seal. 

Side frame made of “Hot Dipped” galvanized tubular framing. 

OPTIONS 

Wider Units 

Automatic switch kit Common member unit 

Extended projections 

Higher units 

09/31/08-0

BLUE GIANT . 

BLUE GIANT . 


Material Handling Services Pty Ltd6 

Montgomery Way 

6 Montgomery Way Malaga WA 6090 

Malaga WA 6090 Tel: 08 9248 6674 

BLUE GIANT DOCK LEVELERS Tel: 08 9248 6674 

BLUE GIANT DOCK LEVELERS 



Blue Giant is one of the largest dock equipment manufacturers in the world and Oleary’s are proud to be 

Blue Giant is one of the largest dock equipment manufacturers in the world and Oleary’s are proud to be 

the authorised dealer of their products for Australia and New Zealand. 

the authorised dealer of their products for Australia and New Zealand. 

SAFETY FEATURES 

SAFETY FEATURES 

Intelligent dock control is now available at the touch of a 

finger…. 

The Blue GeniusTM Gold Series I Dock Control Panel with 

advanced microprocessor technology improves both productivity 

and dock safety via a clear onboard communication system, 

fast-acting touch buttons, and a supervisory keypad lockout and 

override function. 

The Blue GeniusTM detects finger proximity through the insulated 

panel’s surface without direct electrical contact with electrode 

metal, removing the problems associated with wear, corrosion 

and contamination. Maintenance issues surrounding mechanical 

buttons, such as breakage, are eliminated completely. 

The Blue GeniusTM software offers intelligent programmable 

menu options and is easy to upgrade. 

Also available is an advanced 

Blue Genius 

communication package, which 

includes LED interior and exterior 

traffic lights, and driver warning 

signs. 

TM Gold Series I Blue Genius TM Gold Series II Blue Genius TM New HU Series with “Deck Flex Advantage”. The deck is a single sheet of hi-strength floor-plate and is supported by a minimum of 6 high 

tensile solid steel U beam members. This allows the deck to flex up to 100mm to maintain contact with the truck tray while loading and keeps 

the rear hinge flush with the floor at all times for smooth crossover. 

Available in standard widths 1829mm 1981mm & 2108mm and lengths 1918mm, 2527mm & 3137. Other sizes available on request. 

Intelligent dock control is now available at the touch of a 

finger…. 

The Blue Genius Optional Gold Series Control Panels 

Gold Series III 

TM Gold Series I Dock Control Panel with 

advanced microprocessor technology improves both productivity 

and dock safety via a clear onboard communication system, 

fast-acting touch buttons, and a supervisory keypad lockout and 

override function. 

The Blue GeniusTM detects finger proximity through the insulated 

panel’s surface without direct electrical contact with electrode 

metal, removing the problems associated with wear, corrosion 

and contamination. Maintenance issues surrounding mechanical 

buttons, such as breakage, are eliminated completely. 

The Blue GeniusTM software offers intelligent programmable 

menu options and is easy to upgrade. 

Also available is an advanced 

Blue Genius 

communication package, which 

includes LED interior and exterior 

traffic lights, and driver warning 

signs. 

TM Gold Series I Blue Genius TM Gold Series II Blue Genius TM New HU Series with “Deck Flex Advantage”. The deck is a single sheet of hi-strength floor-plate and is supported by a minimum of 6 high 

tensile solid steel U beam members. This allows the deck to flex up to 100mm to maintain contact with the truck tray while loading and keeps 

the rear hinge flush with the floor at all times for smooth crossover. 

Available in standard widths 1829mm 1981mm & 2108mm and lengths 1918mm, 2527mm & 3137. Other sizes available on request. 

Optional Gold Series Control Panels 

Gold Series III 

Optional Forklift Safety Systems 

A hydraulic velocity fuse 

That limits the loaded 

Ramp’s free fall to within 

76mm. 

Full operating range metal 

toe guards painted safety 

yellow as specified by ANSI 

Z535.1 

Stationary side toe guards 

with high visibilty OSHA 

safety striping. 

A maintenance strut that 

supports the deck and lip 

and facilitates under deck 

maintenance and inspection. 

Upside down lifting cylinder for self bleeding, and clear hydraulic tank 

Upside for ease down of maintenance. 

lifting cylinder for self bleeding, and clear hydraulic tank 

for ease of maintenance. 

Optional Forklift Safety Systems 

A hydraulic velocity fuse 

That limits the loaded 

Ramp’s free fall to within 

76mm. 

Full operating range metal 

toe guards painted safety 

yellow as specified by ANSI 

Z535.1 

Stationary side toe guards 

with high visibilty OSHA 

safety striping. 

A maintenance strut that 

supports the deck and lip 

and facilitates under deck 

maintenance and inspection. 

Passive mechanical stop to prevent drive off. Automatic Hydraulic Pop Up for 

drive off and door protection. 

A full range of models available, Mini Dock, Vertical Type, Hydraulic and Mechanical. 

Passive mechanical stop to prevent drive off. Automatic Hydraulic Pop Up for 

drive off and door protection. 

A full range of models available, Mini Dock, Vertical Type, Hydraulic and Mechanical. 

55

56 

MOBILE CONTAINER RAMP 

Mobile container Ramp, Load capacities: 10,000kg-22,000kg 

The container Ramp is made from pre-forged grid as its surface material, it is easy to 

clean and reduces overall weight. The ramps height can be manually operated if there 

is no power supplied on site. Fork point is fitted on the left corner for easy movement 

on the job site. 

Weight: 3.6t 2m x 11.5, 1.2m/.1.7m 

LIFTEZY 

MoDeLS: 

ALWLG-20 

Liftezy is a portable material lift for 

construction and industrial applications. 

Lightweight modern design for easy 

movement. 

Safe, strong and reliable. 

Fit thought a standard door, easy set up. 

Folding stabilizers for compact storage 

Aluminium telescopic mast system 

Work height form 3.5m to 7.9m. 

other size available upon request. 


ALWLG-20 

Storage height 2000mm 

Storage Length 740mm 

Work Length 2080mm 

Work Width 800mm 

Smallest Load Height 150mm 

capacity 363KG 

ALWLG-20 

Weight 184Kg 

Work Height (Fork Upwards) 5940mm 

Work Height (Fork downwards) 6460mm 

Straight arm 6250mm

MEZZ LIFT 

opTIoNS 

FeATUReS 

• Free-standing fabricated shaft • Rugged, reliable & proven 

• Inter-locking gate system construction 

• Railings or guard panels • Hydraulic overload protection 

to suit location 

• Hold to run controls 

• Loading ramp 

• No lift pit required 

• Bespoke platform 

• can operate outside 

• Dual push button control stations • compact design 

• 3-phase motor 

• Standard 240 volt 20 amp 

power requirement 

Factories, Warehouses and Stores often neglect the most important aspect of their 

business –How to move goods quickly and safely from the ground floor to mezzanine 

level. 

Austlift Mezz Lift provides a robust, reliable and cost effective solution, dramatically 

reducing the risk of injury to staff and increasing the efficiency of operation. Its small 

footprint and no requirement for a lift pit make it ideal for even the most restricted of 

sites. 

Built in Britain, built for you, built to last. 

SAFeTy AT WoRK 

employers must make an assessment of risk relating to the manual handling of 

loads at work. 

If the risk cannot be eliminated then it must be reduced to an acceptable level. The 

Mezz Lift is in use with many factory, warehouse and store operators, helping them 

to meet their statutory responsibilities. They also benefit from productivity increases 

and reductions in property and product damage. Mezz Lifts are designed and built 

within a total quality system, ISo 9000/2000, and are ce marked to demonstrate 

compliance with the latest legislation. 

57

58 

CELLAR LIFT NEW! 

pub and restaurant refurbishments all too frequently neglect the 

powerhouses of the whole business, the cellar and the kitchen. 

The cellar Lift provides a robust, reliable and cost effective 

solution to the problems associated with deliveries. 

It can also be of great benefit when used as a case 

hoist for restocking the bar. 

Built in Britain, built for you, built to last. 

HYDRAULIC ELEVATING PLATFORM 

( SCISSOR LIFT) 

Load capacities: Variable upon request (100kg -50T) 

We offer a range of sizes for scissor lifts. 

We custom make the lifts to suit your needs. 

Airplane catering truck mounted scissor lift

ScISSoR LIFT AppLIcATIoN 

59 

59

60 

GRID LIFT 

MoDeL: AL-GL300 

The new GridLifts are designed for installation on highway maintenance vehicles 

such as gully tankers and jetters, for lifting heavy covers out of the way and to 

provide clear access for safe, efficient cleaning and maintenance. crews can clear 

more gullies in the same period with greater safety, each operation taking only 

around two minutes.

FeATUReS 

• 300kg lifting capacity 

• Replaces alternative cover handling 

equipment such as electric 

• Hydraulic rams extend and retract the lifter 

to raise and lower the gully lid 

• Smooth, precise and accurate movements 

for the best possible combination of 

performance and safety 

• Designed to pivot so that the cover 

can be moved aside for easy access 

and cleaning of the gully 

• Separate frame locks into place on the end 

of the vertical arm and attaches securely 

to the gully cover by simple twist clips that can 

accommodate castings with different profiles 

• Remote control key pad allows maintenance 

crews to stand safely away from any moving 

parts during lifting and lowering 

• Two independent locking pins secure the 

device safely in the retracted position when 

the vehicle is moving to comply with 

vehicle safety regulations 

AppLIcATIoNS 

• council & waste management 

• Highway maintenance work 

• Local authorities 

61

62 

WASTE MANAGEMENT 

HSM V-Press 1160 Plus 

The ideal press for the large stores with high volumes of cardboard. 

Product type description: HSM V-Press 1160 plus 

Pressing power: 532 kN 

Specific pressing power: 40.3 N/cm² 

Press chamber depth: 1100 mm 

Loading height: 1115 mm 

Loading aperture width: 1195 mm 

Loading aperture height: 650 mm 

Press chamber width: 1195 mm 

Bale length: 1200,00 mm 

Bale width: 1100 mm 

Bale height: 1200 mm 

Bale weight (max.): 550 kg 

Number of strappings: 4 

Strapping material: Wire 

Cycle time in idle operation: 46 s 

Hourly bale output: 1 - 2 

Type of door: Sliding door 

Door lock: Handwheel 

Driving power: 7.5 kW 

Depth: 1568 mm 

Width: 1737 mm 

Height: 2990 mm 

Weight: 2403 kg 

HSM GmbH + Co. KG Tel. +49 (0) 75 54 / 2100-0 

Austrasse 1 – 9 Fax +49 (0) 75 54 / 2100-160 




Tel: 08 9248 6674 

www.olearys.com.au


The ideal press for the smaller store with limited access or space. 


Austrasse 1 – 9 Fax +49 (0) 75 54 / 2100-160 

88699 Frickingen info@hsm.eu 

www.hsm.eu www.v-press.com 

HSM V-Press 610 

Product type description HSM V-Press 610 

Pressing power 120kN 

Press chamber depth 600mm 

Loading height 655mm 

Loading aperture width 800mm 

Loading aperture height 495mm 

Press chamber width 800mm 

Bale length 800mm 

Bale width 600mm 

Bale height 600mm 

Bale weight (max.) 100kg 

Number of strappings 3 

Strapping material Polyester tape 

Cycle time in idle operation 22 s 

Hourly bale output 3 - 6 

Type of door Double door 

Door lock Handwheel 

Driving power 3 kW 

Voltage 400v 

Voltage Frequency 50 Hz 

Depth 815mm 

Width 1190mm 

Height 1980mm 

Weight 488kg 

63 




Tel: 08 9248 6674 

www.olearys.com.au

64 


HSM V-Press 818 Eco 

The ideal press for the medium size stores with restricted height access. 

Product type description: V-Press 818 Eco 








Bale length: 1200 mm 





Strapping material: Polyester tape 



Type of door: Double Door 


Driving power: 3 kW 

Depth: 997 mm 





Austrasse 1 – 9 Fax +49 (0) 75 54 / 2100-160 






Tel: 08 9248 6674 

www.olearys.com.au



The ideal press for the medium size stores with restricted height access. 

Product type description: V-Press 818 Plus 













Strapping material: Polyester tape 



Type of door: Loading flap 


Driving power: 3 kW 

Depth: 997 mm 





Austrasse 1 – 9 Fax +49 (0) 75 54 / 2100-160 



65 




Tel: 08 9248 6674 

www.olearys.com.au

66 


HSM 

HSM 

V-Press 

V-Press 

820 

820 

eco 

eco 

HSM V-Press 820 eco 

The The ideal ideal press press for for the themedium medium to tolarge large store with restricted restrictedheight height access. access. 

The ideal press for the medium to large store with restricted height access. 

Product Product type type description HSM V-Press 820 820eco eco 

Product Pressing type power power description HSM 178 178 kN V-Press 820 eco 

Pressing Specific pressing power pressing power 178 19.23 kNN/cm² 

N/cm² 

Specific Press Press chamber pressing chamber depth power depth 19.23 780 mm N/cm² 

Press Loading Loading chamber height height depth 780 855 mm 

Loading Loading height aperture aperture width width 855 1200 mm 

Loading Loading aperture aperture width height height 1200 610 mm mm 

Loading Press 

Press 

chamber aperture chamber 

width height width 610 1195 

1195mm mm 

mm 

Press Bale chamber length width 1195 1200 mm 

Bale length 1200 mm 

Bale Bale length width 1200 780 mm 

Bale mm 

Bale 

Bale 

width 

width 

height 

780 

780 

1000 

mm 

mm 

mm 

Bale Bale height weight (max.) 1000 250 kgmm 

Bale Baleheight 1000 mm 

Number weight of (max.) strappings 250 4 kg 

Bale Number weight (max.) 250 kg 

Strapping of strappings material 4Polyester 

tape 

Number Strapping Cycle 

of 

time material strappings 

in idle operation 

4Polyester 

23 s tape 

Strapping Cycle Hourly timematerial bale in idle output operation Polyester 23 2 - s5 

tape 

Cycle Hourly Type time bale ofin door output idle operation 23 2Double -s5 Door 

Hourly Type Door of bale door lockoutput 2Double Handwheel - 5 Door 

Type Door Driving of lock door power Double Handwheel 

4 kW Door 

Door Driving Depth lock power Handwheel 4997 kWmm 

Driving Depth Width power 4997 1700 kWmm 

mm 

Depth Width 

Height 997 1700 

2470mm mm 

mm 

Width Weight 1700 1300 mm kg 

Height 2470 mm 

Height Weight 2470 1300mm kg 

Weight 1300 kg 


Austrasse 1 – 9 Fax +49 (0) 75 54 / 2100-160 

HSM 

88699 

GmbH 

Frickingen 

+ Co. KG 

www.hsm.eu 

HSM Austrasse GmbH 1 – + 9Co. KG 

Tel. 

info@hsm.eu 

+49 (0) 75 54 / 2100-0 

www.v-press.com 

Tel. Fax +49 (0) 75 54 / / 2100-0 2100-160 

Austrasse 88699 Frickingen 1 – 9 Fax info@hsm.eu +49 (0) 75 54 / 2100-160 

88699 www.hsm.eu Frickingen info@hsm.eu 






Material Handling Services Malaga PtyWA Ltd6090 


6 Montgomery Tel: 08 9248 Way6674 


Malaga 

Tel: 08 

WA 

9248 

6090 

6674 


Tel: 08 9248 6674 

www.olearys.com.au


HSM V-Press 840 eco 

The ideal press for the medium to large store with no restricted height access. 

Product type description: HSM V-Press 840 eco 
















Type of door: Double door 








Austrasse 1 – 9 Fax +49 (0) 75 54 / 2100-160 






Tel: 08 9248 6674 


67

68 



The ideal press for the medium to large store with no restricted height access. 

Product type description HSM V-Press 840 plus 

Pressing power 356 kN 

Specific pressing power 38.03 N/cm² 

Press chamber depth 780 mm 

Loading height 1100 mm 

Loading aperture width 1195 mm 

Loading aperture height 650 mm 

Press chamber width 1195 mm 

Bale length 1200 mm 

Bale width 780 mm 

Bale height 1200 mm 

Bale weight (max.) 360 kg 

Number of strappings 4 

Strapping material Wire 

Cycle time in idle operation 32 s 

Hourly bale output 2 - 3 

Type of door Sliding door 

Door lock Handwheel 

Driving power 7.5 kW 

Depth 1247 mm 

Width 1767 mm 

Height 2985 mm 

Weight 1990 kg 


Austrasse 1 – 9 Fax +49 (0) 75 54 / 2100-160 






Tel: 08 9248 6674 

www.olearys.com.au



The ideal press for the larger stores with no restricted height access. 

Product type description: HSM V-Press 860 plus 











Bale weight (max.) : 480 kg 





Type of door: Sliding door 








Austrasse 1 – 9 Fax +49 (0) 75 54 / 2100-160 






Tel: 08 9248 6674 


69

70 


HSM V-Press 610 HSM V-Press 820 eco HSM V-Press 840 eco 

HSM V-Press 860 plus HSM V-Press 1160 plus 

Pressing 

power 

in kN 

Motor 

in kW 

Cycle time 

in idle 

operation 

(theor.) 

in sec. 




Tel: 08 9248 6674 


HSM Bale Press Range 

Volume 

throughput in 

idle operation 

(theor.) 

in m 3 /h 

Max. bale size 

LxWXHinmm 

Bale 

weight in 

kg 

Hourly 

output 

in bales 

Loading 

aperture 

W x H in 

mm 

Dimensions of machine 

WxDxHinmm. 

HSM V-Press 610 120 3.0 22 58 800 x 600 x 600 up to 100 3-6 800 x 495 1190 x 815 x 1980 





HSM GmbH + Co. KG 

Austrasse 1 - 9 

88699 Frickingen 

www.hsm.eu 

Tel. +49 (0) 75 54 / 2100-0 

Fax +49 (0) 75 54 / 2100-160 

info@hsm.eu 

www.v-press.com


HSM _V-PRESS 60 




Tel: 08 9248 6674 


The mobile baling press HSM V-Press 60 compresses foils and lightweight packaging 

material (paper, cardboard) right where the material is. 

Compresses plastic foils, paper bags, lightweight boxes and packing paper. 

Mobile on casters. 

Effortless to operate with a minimum amount of strength. 

No electric or hydraulic components – no electricity, no servicing, no maintenance 

required. 

Produces well compressed, stackable bales. 

Product type description: HSM V-Press 60 










Strapping material: GARN 

Door lock: lever 

Depth: 735 mm 

Width: 810 mm 


Weight: 95 kg 

HSM GmbH + Co. KG 

Austrasse 1 - 9 

88699 Frickingen 

www.hsm.eu 

Tel. +49 (0) 75 54 / 2100-0 

Fax +49 (0) 75 54 / 2100-160 

info@hsm.eu 


71

72 

ABN 80 135196468 

General Terms & Conditions of Sale 

1 DEFINITIONS 

In these General Conditions of Sale (“Conditions”) 

“Account” means the account maintained by Austlift in the name of the Purchaser to facilitate the 

purchase of goods from Austlift. 

“Austlift” is a trade mark or products brand which is owned by Pacific Lifting Pty Ltd. and registered in 

Australia 

“Purchaser” means the company, firm, person or other entity identified as the applicant on the “Credit 

Account Application” form published by Austlift from time to time and/or in whose name an account is 

kept and/or who acquires goods and/or services from Austlift from time to time. 

2 APPLICATION 

All contracts arising between Austlift and the Purchaser in respect of goods supplied or to be supplied 

by Austlift shall be subject to these Conditions and any other conditions expressly agreed to in writing 

by Austlift and the customer to the exclusion of all other terms and conditions contained in any order or 

other documents submitted by the customer shall form part of any such contract. 

3 ORDERS 

All orders must be placed in writting and sent via email or fax with our quotation number attached. 

We do not accept verbal order in general unless this is in urgent or COD payment. 

4 PRICE All prices published or quoted are subject to change without notice and goods will be billed at 

prices existing at the time of invoicing. Orders with conflicting pricing will warrant amendment for 

correction and confirmation by Purchaser prior to Austlift processing their purchase. Back orders may 

be subjected to prices in effect, while Indent orders will include any additional currency exchange rate 

variations upon delivery or invoice. All prices are exclusive of G.S.T however total of G.S.T payable will 

be stated on the tax invoice. 

Discounts including special net pricing may be offered at times; such prices are only applicable for 

certain project, period or product and warrants Austlift discretion at all times. 

5 PAYMENT 

Unless otherwise agreed in writing by Austlift, the Purchaser shall pay Austlift the total amount owed for 

goods supplied to the Purchaser and set out in Austlift’s invoice before delivery. 

For accounts customers a penalty of 1.5% per month shall also applicable to all overdue account past 

sixty (60) days of invoice. In the event that the Purchaser fails to pay the total amount owing in respect 

of goods supplied by the Due Date, Austlift may require the Purchaser to pay to Austlift by way of 

liquidated damages, a default charge being a sum which is calculated by the application of the daily 

percentage rate which is 2% above Austlift’s overdraft interest rate at the time, on the unpaid balance of 

the amount due from the Due Date until the total amount outstanding is paid in full. Austlift reserves the 

right to withhold supply of goods if terms of payment are not adhered to by the Purchaser. Indent orders 

warrant security of an irrevocable letter of credit payable within fifteen (15) days from time of delivery, 

and no settlement discount shall apply on such invoice. 

We accept EFT or cheque for customers who have credit accounts with us. We accept cash or credit 

card payments for cash sales. 

6 MINIMUM INVOICE VALUE 

Without limitation, Austlift reserves the right at all times to reject orders with a pre-tax value less than 

$50.00. In the event that Austlift, in its discretion, decides to accept orders with a pre-tax value less 

than $50.00, the Purchaser shall pay Austlift an administration and processing charge with respect to 

the relevant order equal to the difference between the pre-tax value of that order and $50.00.

7 DELIVERY 

a. If Austlift specifies particular terms of delivery, carriage and insurance with respect to goods in a 

quotation provided by Austlift to the Purchaser, those terms and conditions will apply to the delivery, 

carriage and insurance of the relevant goods. 

b. If Austlift does not specify terms for delivery, carriage and insurance within a quotation provided to 

the Purchaser or there is no quotation, the purchaser shall arrange his own transport for the order. 

c. Austlift can arrange a transport service for your order at your cost. Deliveries are often arranged via 

our selected carrier on general freight (based on logistics and most economical pricing structure), 

and charges, where applicable are invoiced to customers accordingly. 

d. Any (part or complete) orders sourced via another branch shall incur freight transfer charges unless 

or until goods were to accompany general monthly stock transfers. 

8 DIMENSIONS AND MASSES 

Dimensions and masses published or quoted with respect to goods supplied by Austlift are based on 

standards and manufacturing specifications, therefore must be considered as approximate and for 

guidance only. All such measurements are subject to commercial tolerances and may also be subject to 

change without notice. 

9 CLAIMS BY THE PURCHASER 

a. All goods sold will be deemed to be of the required quantity and type unless a claim specifying 

particulars of deficiencies or incorrect type is made within seven (7) days after receipt of the 

goods by the Purchaser. 

b. Where products are on-forwarded by goods air, rail or carrier nominated by the Purchaser, then 

a receipt from the airline, railway or carrier shall be considered adequate proof of delivery and 

Austlift’s liability with respect to loss or damage to the goods will cease upon delivery of the 

goods to the carrier. 

c. Where Austlift accepts responsibility for delivery of the goods, Austlift will not be liable to the 

Purchaser in relation to defective goods unless the Purchaser gives notice of the defect to 

Austlift in writing within seven (7) days after receipt of goods by the Purchaser. 

d. Except as specifically provided to the contrary in these conditions, Austlift shall in no case be 

liable in any way for goods damaged in transit. 

10 CANCELLATIONS AND RETURNS FOR CREDIT 

a. Orders can only be cancelled or goods returned for credit with the prior written agreement of 

Austlift provided that the goods are returned in the same re-saleable conditions as when they 

were originally sold. Goods accepted for return must be despatched by a carrier nominated by 

Austlift, only after receiving a credit return authority number from Austlift (invoice number and 

date are required on all claims). Returns due to purchase error will incur a restocking charge of 

15% and transportation costs of products will be for account of the Purchaser. 

b. Any goods specifically made and or procured on behalf the Purchaser, that meet the 

Purchaser’s specific request are not refundable for credit. 

11 DELAYS IN DELIVERY 

Austlift will use its best endeavors to meet specified delivery dates and whether or not a delivery date is 

specified Austlift will be under no liability of any kind for any delay in delivery from any cause 

whatsoever. If for any reason beyond the control of Austlift, orders cannot be filled at the time stipulated 

by the Purchaser, Austlift shall be entitled to determine the relevant contract of sale and the Purchaser 

shall not have any claims against Austlift arising out of such cancellation, without prejudice to the rights 

of Austlift to recover all sums owing to it in respect of goods or services provided prior to the date of 

such determination. 

12 PRODUCT SUITABLITY 

Except to the extent that Austlift has made express representations in writing (whether in catalogue or 

otherwise) as to safe working loads, the Purchaser shall be responsible for determining the fitness of 

goods sold by Austlift for the purpose for which they are intended and acknowledges that Austlift is not 

aware of that purpose and that he has not relied on Austlift’s advice. 

13 LIABILTY 

13.1 Subject to statutory warranties that cannot be excluded, Austlift shall not be liable for any loss 

or damage whatsoever and howsoever arising whether direct, indirect or consequential or in 

respect of any claim whenever and however made for any loss or damage deterioration, 

deficiency or other fault or harm in the goods manufactured and/or delivered, work executed or 

services provided by or on behalf of or in any arrangement with Austlift or occasioned to the 

purchaser or any third or other party or to his or their property or interest and whether or not 

due to the negligence of Austlift its servants or agents. 

73

74 

13.2 As soon as any of the facts or matters which form any part of any claim or complaint 

whatsoever become known to the purchaser, the purchaser shall within fourteen (14) days 

notify Austlift in writing of the same. 

13.3 Austlift shall not be liable in any circumstances for any; 

(i) defects or damages caused in while or in part by misuse, abuse, neglect, electrical or 

other overload, non-suitable lubricant, improper installation, repair or alteration (other 

than by) or accident. 

(ii) any transport freight charges, installation, removal, labour or other cost; 

(ii) defects in goods not manufactured by it but endeavour to pass on to the purchaser the 

benefit of any claim made by Austlift and accepted by the manufacturer of such goods 

under a warranty given by the manufacturer of such goods provided that nothing 

contained in this subparagraph shall limit the rights of the purchaser to proceed against 

Austlift pursuant to the Trade Practices Act 1974. 

(iv) technical advice or assistance given or rendered by it to the purchaser or not in 

connection with the manufacture, construction or supply of goods for or to the 

purchaser provided always that Austlift has rendered such services with due care and 

skill and that any material supplied in connection with those services are reasonably fit 

for the purpose for which they are supplied. 

13.4 The exemptions, limitations, terms and conditions in these terms and conditions shall apply 

whether or not the loss or damage is caused by negligence or actions constituting fundamental 

breach of contract. 

14. DEFAULT BANKRUPTCY ETC. 

If the Purchaser is in default in making payment for any goods whether the subject of the same or 

different orders, or if the purchaser being an individual shall become bankrupt or being a corporation 

shall take or have taken against it any steps having the object of winding-up or placing the Purchaser 

under any form of insolvency administration, Austlift shall be entitled by notice in writing to the 

Purchaser to require re-delivery to Austlift, at the cost and expense of the Purchaser of all goods which 

have not been paid for as aforesaid and for the purpose of recovering the goods. Austlift, its servants or 

agents may enter any land or building upon which Austlift believes the goods may be located within 

business hours without notice. 

15. TITLE IN GOODS 

Notwithstanding anything to the contrary express or implied in these Conditions between Austlift and 

the Purchaser: 

a. Property in all goods supplied by Austlift to the Purchaser (“Goods”) shall remain with Austlift and 

shall not pass to the Purchaser until Austlift has received payment in full for the Goods and until all 

outstanding debts owed by the Purchaser to Austlift arising from the operation of the Account have 

been paid; 

b. Until such time as Austlift has received payment in full for the Goods and until all outstanding debts 

owed by the Purchaser to Austlift arising from the operation of the Account have been paid, the 

Purchaser shall hold the Goods as bailee for Austlift and shall store and identify the Goods in a 

manner which enables them to be clearly identified as Goods belonging to Austlift. 

c. As agent for Austlift, the Purchaser is authorised to sell any Goods supplied to the Purchaser by 

Austlift to third parties prior to the Due Date which is applicable in relation to payment for such 

goods. In the event of such sale, the Purchaser shall specifically earmark monies resulting from 

such sale and shall place the monies into a separate account to be held on trust for Austlift until 

such time as payment for those goods is made to Austlift, The Purchaser shall not represent to third 

parties that it is selling the Goods as agent for Austlift; 

d. In the event that the Purchaser fails to pay Austlift for Goods supplied by the Due Date, the 

Purchaser hereby agrees to deliver up the Goods to Austlift upon demand by Austlift and consents 

to Austlift retaking possession of the Goods and for this purpose the Purchaser authorises Austlift 

without notice, to enter upon the Purchaser’s premises in which such goods are stored to collect the 

Goods; 

e. In the event that the Purchaser commits an act of bankruptcy or where the Purchaser is a company, 

has a receiver, administrator or liquidator appointed to it or goes into any other form of insolvency 

administration, Austlift shall be entitled to immediate possession of the Goods supplied by it to the 

Purchaser remaining at that time in the possession of the Purchaser and is authorised to enter 

upon the Purchaser’s premises to collect such goods without prejudice to any other rights of 

Austlift; 

f. If Austlift retakes possession of any of the Goods pursuant to sub-clause (d) or (e) above, Austlift 

shall have the right to sell the Goods to any other party; and, 

g. The parties acknowledge that no charge or mortgage is intended to be created over the Goods 

supplied by Austlift to the Purchaser.

10 RISK 

The goods shall be at the Purchaser’s risk from the time of the first occurrence of any of the following 

events: 

a. the passing of property to the Purchaser; 

b. the physical delivery of the goods to the Purchaser; or 

c. the physical delivery to a carrier or other bailee whether named by the Purchaser or not 

Austlift shall be under no obligation to give its Purchaser a notice referred to in Section 35(3) of the 

Sale of Goods Act 1923. 

17 DISCOUNTS NULLIFIED BY RECOVERY PROCEEDINGS 

If it becomes necessary to institute legal proceedings to recover unpaid debts to Austlift, all discounts 

showing on unpaid invoices become null and void and the total list prices showing become payable. 

18 COSTS OF RECOVERY PROCEEDINGS 

In the event of the Purchaser’s default under these Conditions, the Purchaser shall pay to Austlift upon 

demand, all costs and expenses, including all recovery and legal costs (assessed on a solicitor and 

own client basis) incurred by Austlift in the enforcement of its rights with respect to that default. 

19 CHANGE IN OWNERSHIP / EFFECTIVE CONTROL 

The Purchaser agrees to notify Austlift in writing of any change in ownership or effective control of the 

Purchaser within seven (7) days from the date of such change in effective control or ownership and 

indemnifies Austlift against any loss or damage incurred by Austlift as a result of the Purchaser’s failure 

to notify Austlift of any such change. 

20 JURISDICTION 

The parties agree that the terms and conditions applying to any credit account opened in the name of 

the applicant and any other contract between Austlift and the Purchaser shall be governed by the laws 

of the State of New South Wales in force for the time being and from time to time, and the parties 

irrevocably submit generally and unconditionally to the jurisdiction of the Courts of New South Wales in 

respect of claims, proceedings and matters arising out of or in respect of the said credit account or any 

said contract. 

21 PURCHASERS AUTHORITY 

The Purchaser agrees to be bound by the Terms and Conditions of Sale for Delivery. Claims on 

Delivery, Returned Goods, Transport Charges, Pricing Warranty and Written Contracts, when and 

where as stated on the current price list, invoices and/or notice sent to all customers of Austlift. 

If the Purchaser is a trustee, the directors warrant that they have authority and power to enter into this 

agreement and personally guarantee the performance of all the trusts obligations under this 

agreement. 

The Purchaser acknowledges that Austlift is entitled to presume that any person purporting to have the 

authority to bind the Purchaser to a contract in respect of goods and/or services from Austlift, has the 

authority they claim. 

22 NOTICES 

Any notice by one party to the other shall be sufficiently served personally or by facsimile transmission, 

or if posted, by pre-paid post to the party to be served at the registered office of that party or its last 

known place of business or address and shall be deemed to have been received; 

a. within three (3) business days of the date of posting if served by post to an address in Australia 

b. within fourteen (14) days of the date of posting if served by post to an address outside of Australia, 

and 

c. immediately upon receipt of a successful transmission report by the sender if served by facsimile 

transmission. 

23 CHARGE 

The Purchaser hereby charges with payment of any indebtedness to Austlift all beneficial interest 

(freehold and leasehold) in land and personal property held now or in the future by the Purchaser. 

Austlift may lodge a caveat noting the interest given by this charge on the title of any property of the 

Purchaser whenever it so wishes. 

24 SERVICE 

The parties agree that service of any notices, demands, proceedings; statement of claim, suits or 

actions (process) upon the Purchaser may be effected by Austlift or its solicitors sending such process 

by prepaid post to the address given in the Credit Application as the address of the Purchaser. Services 

shall be deemed to have been effected two business days after the posting of the process. 

75

AuSTrALIAN OWNED - NATIONWIDE SErVICE 

Sydney: 43 Frank St Wetherill park, NSW 2164 ph: 02 9757 2225 

Melbourne: 2/19 Technology circuit Hallam VIc 3803 ph: 03 9703 2271 

Brisbane: 7 Durbell St Acacia Ridge, QLD, 4110 ph: 07 3272 8886 

perth: 26 Westchester Road Malaga WA 6090 ph: 08 9248 6674 

© copyRIGHT pAcIFIc LIFTING 2013, SpecIFIcATIoNS AND DIMeNSIoNS SUBjecT To cHANGe WITHoUT NoTIce.

Pacific Lifting - O'Learys Material Handling Services

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?