After-sale Service Manual

Notice:Allow you enter notice below the task you want to print. This notice will
print together with ―notice print‖ on the unit ―setting‖ screen . It is different from
the notice enter in the ―setting‖ in the window of ―notice print‖(these notice will
apply on all the print task on the print unit),here enter ―task notice ― only apply on
this task.
Must chosen “notice print” in the screen of “setting” and enter in the window of
“task notice” so that It will print with the task.
Multi tasks’ property
Highlight the show of multi RIP list entry and choose ―show the property of chosen
task‖
Will entre the screen below. Please pay attention, choose multi handle will
effective to multi entry.
11. Handle print list
When the task show a quantity above 0, it means the task is ready list and print. If
not , the list print task will start print according to their list order if you haven‘t chose
any inhibit the function of print on the unit options. The listed print task will start
printing in order of the queue.
The waiting to print unit will show the quantity of print but not start print
When electing a task of "Print list", all tool bars in specific list are active. For the RIP
list,some operations can be started for a single operation, while other operations
can be simultaneously applied to multiple jobs. "Cancel the selected job of all
operations" and "Remove the selected job" are of same function with two options
of "RIP list" . Here are the other "print list" operations:
The selected print task
Start "RIP and Print" process for the selected task, and enter the default number 1
at the same time. Click "printer ―on the tool bar will add one copy to be printed
once.
Add selected tasks to the present layout:
Open the selected job on "Layout". The tasks on the printing list has experience RIP,
so they will display frame with a solid blue line on the "layout" screen . If you do not
21