Wednesday May 22, 2013 - Autex 2013 Germany

13th AUTEX World Textile Conference 2013 in Dresden - Final Programme - Wednesday May 22, 2013
Please note that the Organizers reserve the right to change the schedules.
Update: May 6, 2013
09:00 – 09:15 Opening of the Conference by Prof. Chokri Cherif, President, AUTEX and Prof. Hans Müller-Steinhagen, Rector, TU Dresden
09:15 – 09:45 Plenary Presentation - RESEARCH INNOVATION IN FUNCTIONAL TEXTILES 2BFUNTEX, Prof. Paul Kiekens, Ghent University, Belgium
09:45 – 10:15 Plenary Presentation - 3-D LIGHT TRANS, Mr.Silvio Antonio, Centro Ricerche Fiat (CRF), Italy
10:15 – 10:30 AUTEX Award presentation
10:30 – 11:00 BREAK + POSTER SESSION
11:00 – 11:15 M. Radetic , et al. (15)
Session 1 Session 2 Session 3 Session 4
Textile Engineering Department, Faculty of
Technology and Metallurgy, University of
Belgrade, Belgrade, Serbia
ANTIMICROBIAL ACTIVITY OF Ag
NANOPARTICLES ON POLYESTER
FABRICS GENERATED BY
PHOTOREDUCTION USING TiO2
NANOPARTICLES
11:15 – 11:30 J. Geltmeyer, et al. (44)
Fibre and Colouration Technology
Research Group, Department of Textiles,
Faculty of Engineering and Architecture,
Ghent University, Belgium
STABLE ELECTROSPINNING OF SILICA
NANOFIBRES: VISCOSITY STUDY
11:30 – 11:45 L. Ciera, et al. (24)
Department of Textiles, Faculty of
Engineering and Architecture, Ghent
University, Belgium
A MODEL SYSTEM TO STUDY THE
VIABILITY OF BIO-AGGREGATES TO
MELT EXTRUSION PROCESS
PARAMETERS
11:45 – 12:00 Ganna Ungur, et al. (54)
University of Liberec, Faculty of Textile
Engineering, Czech Republic
FILTERING MATERIALS BASED ON
NANOFIBERS WITH CATALYTIC
PROPERTIES FOR AIR FILTRATION
G. Harjkova, et al. (12)
Riga Technical University, Institute of
Mechanics, Latvia
ANALYSIS OF KNITTED FABRIC
GEOMETRICAL PARAMETERS USING
X-RAY MICROTOMOGRAPHY
A. Fürst, et al. (52)
Fraunhofer IWS Dresden, Germany
INVESTIGATIONS ON THE INFLUENCE
OF LASER IRRADIATION TO CRIMPING-
AND SHRINKAGE- EFFECTS OF
THERMOPLASTIC MONOFILAMENTS
E. Yousef, et al. (62)
Laboratoire de physique et Mécanique
Textile_EAC CNRCS, 7189_Université de
Haute Alsace, Mulhouse, France
NEW AUTOMATIC MANIPULATION
SYSTEM FOR FABRICS
H. İ. Çelİk, et al. (157)
University of Gaziantep, Textile
Engineering Department, Gaziantep,
Turkey
DEVELOPMENT OF AN IMAGE
ANALYSING METHOD FOR DENIM
FABRIC DEFECT DETECTION
M. Karaboyacı, et al. (347)
Süleyman Demirel University, Turkey
ECOLOGICAL BLEACHING PROCESS
DESIGN WITH PECTINASE AND
HYDROGEN PEROXIDE
R. Pal, et al. (45)
The Swedish School of Textiles, University
of Borås, Sweden
THE QUEST FOR CONTINUAL GROWTH
IN TEXTILES: INNOVATION DIVERSITY
AND ORGANIZATIONAL RESILIENCY
B. Zi-Qian, et al. (107)
Institute of Textiles and Clothing, The Hong
Kong Polytechnic University, Hong Kong
INTEGRATION OF SURFACE PRINTING
AND LASER-ENGRAVING FOR DESIGN
OF COLOR-CHANGEABLE POF FABRIC
P. Tolksdorf (388)
VDMA, A. Monforts Textilmaschinen GmbH
& Co. KG, Mönchengladbach, Germany
ENABLING ENERGY EFFICIENCY AND
RESOURCE SAVING – SUSTAINABILITY
MEETS PROFIT
S. Nourbakhsh, et al. (172)
Textile Department, shahre Rey Branch,
Islamic Azad University, Tehran, Iran
DURABILITY IMPROVEMENT OF
SILVER NANO PARTICLES ON COTTON
FABRIC BY MALEIC ACID
P. Valipour, et al. (16)
Department of Textile, Qaemshahr
Branch, Islamic Azad University,
Qaemshahr, Iran
EVALUATION OF REACTIVE DYE
ADSORPTION ON COTTON FABRICS
TREATED WITH CHITOSAN
S. Gierling, et al. (299)
Hohenstein Institut für Textilinnovation
gGmbH, Bönnigheim, Germany
TEXTILES WITH THERMOADAPTIVE IR-
TRANSMISSION FOR HEAT
INSULATION IN BUILDINGS
W. Small (276)
Croda International Plc, Yorkshire, United
Kingdom
LOW BASIS WEIGHT NONWOVENS IN
HYGIENE APPLICATIONS – A NEW
CHALLENGE FOR THE FINISH

13th AUTEX World Textile Conference 2013 in Dresden - Final Programme - Wednesday May 22, 2013
Please note that the Organizers reserve the right to change the schedules.
Update: May 6, 2013
12:00 – 12:15 E. Fatarella (55)
Session 1 Session 2 Session 3 Session 4
Next Technology Tecnotessile, Prato,Italy
SOUND ABSORPTION TEXTILE
IMPROVED BY RECYCLED POLYESTER
NANOSTRUCTURE
C. Sasse, et al. (170)
Institut für Textiltechnik der RWTH Aachen
University, Aachen, Germany
IMPROVEMENT OF ENERGY
EFFICIENCY IN AIR-JET WEAVING
THROUGH IMPROVED RELAY NOZZLE
SETTING – A SEMI-EMPIRICAL
APPROACH
12:15 – 14:00 LUNCHBREAK
14:00 – 14:15 L. Cronje, et al. (390)
Department of Chemistry and Polymer
Science, Stellenbosch University, South
Africa
pH DEPENDENT ADHESION OF
MYCOBACTERIA TO SURFACE-
MODIFIED POLYMER NANOFIBERS
14:15 – 14:30 Y. Bulut, et al. (86)
Department of Textile Engineering, Dokuz
Eylul University, Tinaztepe Campus, Izmir,
Turkey
THE EFFECTS OF DIFFERENT
STRUCTURAL PARAMETERS ON
TENSILE AND DETACHING FROM A
NEEDLE PERFORMANCE OF
ATRAUMATIC SURGICAL SUTURES
14:30 – 14:45 V. Dutschk, et al. (367)
Twente University, Enschede, Netherlands
PREPARATION OF CELLULOSE-BASED
SPONGES FOR WOUND DRESSING
AND HEALING
V. Niebel, et al. (273)
Institut für Textiltechnik der RWTH Aachen
University, Aachen, Germany
SYSTEMATIC DEVELOPMENT OF
SENSOR BASED ONLINE-QUALITY
CONTROL SYSTEMS FOR TEXTILE
WELDING
S. K. Sinha, et al. (81)
National Institute of Technology, Jalandhar,
India
AN INVESTIGATION OF THE
BEHAVIOUR OF THIN PLACES IN RING
SPUN YARNS
M. R. Amirpour, et al. (83)
Amirkabir University of
Technology,Tehran,Iran
INFLUENCE OF YARN FRICTIONAL
PROPERTIES ON FRICTIONAL
PROPERTIES OF WOVEN FABRICS
P. Franitza (161)
Sächsisches Textilforschungsinstitut e.V.
(STFI), Chemnitz, Germany
TECHNICAL TEXTILES IN GERMANY
AND EUROPEAN ACTIVITIES FOR
INDUSTRIAL UPTAKE OF RESEARCH
RESULTS
W. F. Lau, et al. (111)
Institute of Textiles and Clothing, The Hong
Kong Polytechnic University, Hong Kong
SELF-IMAGE OF BREAST SIZE AND
SHAPE RELATED TO THE PERCEPTION
OF BRA FIT AND SUPPORT
A. Leipner, et al. (132)
Institute of Textile Machinery and High
Performance Material Technology, TU
Dresden, Germany
3D PRODUCT DEVELOPMENT BASED
ON KINEMATIC HUMAN MODELS
J. Šerod, et al. (152)
University of Maribor, Faculty of
Mechanical Engineering, Slovenia
MULTICOMPONENT TEXTILE BLEND
RECYCLING
O. E. Akay, et al. (69)
The University of Kahramanmaras, Avsar,
Turkey
INVESTIGATION OF EXPERIMENTAL
CLOSED LOOP ADSORPTION SYSTEM
FOR TEXTILE DRYING PROCESSES
V. Shakeri, et al. (100)
Department of Textile Engineering, South
Tehran Branch, Islamic Azad University,
Tehran, Iran
THE STUDY OF CORONA DISCHARGE
EFFECT ON THE PHYSICAL AND
MECHANICAL PEROPERTIES OF
COTTON KNITTED FABRIC
O. Balci, et al. (70)
University of Kahramanmaras Sutcu Imam,
Textile Engineering Department, Turkey
THE BLEACHING OF INDIGO DYED
COTTON YARN AND DENIM FABRIC BY
DIFFERENT OXIDATIVE AND
ENZYMATIC METHODS
J. Vasiljević, et al. (140)
University of Ljubljana, Department of
Textiles, Aškerčeva, Slovenia
SURFACE MODIFICATION OF
POLYESTER FIBRES BY PLASMA PRE-
TREATMENT AND SOL-GEL FINISHING

13th AUTEX World Textile Conference 2013 in Dresden - Final Programme - Wednesday May 22, 2013
Please note that the Organizers reserve the right to change the schedules.
Update: May 6, 2013
14:45 – 15:00 H. Brodowsky, et al. (359)
Session 1 Session 2 Session 3 Session 4
Leibniz-Institut für Polymerforschung
Dresden eV, Dresden, Germany
INTERPHASE STUDIES IN NATURAL
FIBRE COMPOSITES
15:00 – 15:15 M. Kuhr, et al. (227)
Institute of Textile Machinery and High
Performance Material technology, TU
Dresden, Germany
IMPROVE THE BARRIE EFFECT OF
BARRIER TEXTILES BY FINISHING
WITH MICROPARTICLES
E. Sarioglu, et al. (156)
University of Gaziantep, Textile
Engineering Department, Turkey
AN INVESTIGATION ON TENSILE
PROPERTIES OF COTTON COVERED
MICROFILAMENT CORE-YARN
R. Almohamad, et al. (163)
ENSISA-Laboratoire de physique et
Mécanique Textiles, Mulhouse, France
APPLICATION OF “PLC MOTION
CONTROLLER” FOR DEVELOPMENT
OF NEW TEXTILE MACHINE
M. Karaboyacı, et al. (362)
Süleyman Demirel University, Turkey
THE PRODUCTION OF INSECT
REPELLENT TEXTILE MATERIALS BY
USING CYCLODEXTRIN AND
RECYCLED GERANIOL
K. C. H. Bezerra, et al. (213)
15:15 – 16:00 COFFEE BREAK + POSTER SESSION
16:00 – 16:15 H. G. Atasağun, et al. (269)
Dokuz Eylül University, İzmir,Turkey
THE ASSESMENT OF
THERMOPHYSIOLOGICAL COMFORT
FOR VILOFT BLENDED KNITTED
FABRICS IN WEAR TRIALS
16:15 – 16:30 M. Hild, et al. (284)
Institute of Textile Machinery and High
Performance Material Technology, TU
Dresden, Germany
THREE DIMENSIONAL NET-SHAPE-
NONWOVEN CHITOSAN SCAFFOLDS
FOR BONE TISSUE ENGINEERING
APPLICATIONS
16:30 – 16:45 G. Priniotakis, et al. (295)
Technological Education Institute of
Pireaus, Greece
COPPER COATED TEXTILES WITH
POTENT ANTIMICROBIAL ACTIVITY
AGAINST MULTIDRUG-RESISTANT
NOSOCOMIAL PATHOGENS
I. Rahnev (198)
College of Sliven (TU – Sofia), Bulgaria
EQUALIZED RHEOLOGY REACTION OF
THE TWISTED HYBRID THREADS
N. Trifigny, et al. (205)
Univ. Lille Nord de France, Lille, France
PEDOT:PSS BASED SENSORS FOR IN-
SITU MEASUREMENT DURING THE
COMPOSITE MATERIAL WEAVING
PROCESS
C. Sennewald, et al. (402)
Institute of Textile Machinery and High
Performance Material technology, TU
Dresden, Germany
NOVEL WOVEN 3D WIRE STRUCTURES
FOR HYBRID LIGHTWEIGHT
CONSTRUCTIONS
Scholl Sciencie Arts and Humanites - USP,
São Paulo, Brasil
TEXTILE EFFLUENT TREATMENT DYED
WITH REACTIVE DYES RED DRIMAREN
CL-5B BY PHOTOCHEMISTRY
DEGRADATION WITH H2O2/UV
N. F. Ferreira, et al. (99)
University of Sao Paulo – USP, Brasil
FUNDAMENTAL ASPECTS OF
ORNAMENTATION
N.-K. Persson, et al. (323)
Swedish School of Textiles, University of
Borås, Sweden
OPTIMALLY SIMPLE PHOTOCATALYTIC
WATER PURIFICATION SYSTEM FOR
LOW INCOME COUNTRIES
A. Klepser, et al. (316)
Hohenstein Institut fuer Textilinnovation
gGmbH, Boennigheim, Germany
A CLOSE LOOK: SCANNING
PROCEDURE FOR DETAILED HAND
ACQUISITION
L. Almeida, et al. (325)
Department of Textile Engineering,
Universidade do Minho, Portugal
WARM FEELING COSMETIC TEXTILE
S. Nascimento do Carmo, et al. (204)
University of Minho, Department of Textile
Engineering, Guimarães, Portugal
FUNCTIONALIZATION OF CORK
AGGLOMERATE COMPOSITE WITH
PCM MICROCAPSULES AFTER DBD
PLASMA TREATMENT
J. Rodrigues, et al. (212)
University of São Paulo (USP), Brasil
THE APPLICATION OF SUSTAINABLE
NATURAL DYES ON FIBER TEXTILES
FOR FASHION
G. Brinks, et al. (256)
Saxion University of Applied Sciences,
Enschede, the Netherlands
THE ADDED VALUE OF 3D POLYMER
DEPOSITION ON TEXTILES
J. Shen, et al. (290)
De Montfort University, Leicester, UK
SOL-GEL PROCESS OF COTTON
FABRIC TO ACHIEVE
MULTIFUNCTIONALITY

13th AUTEX World Textile Conference 2013 in Dresden - Final Programme - Wednesday May 22, 2013
Please note that the Organizers reserve the right to change the schedules.
Update: May 6, 2013
16:45 – 17:00 E. Topel, et al. (330)
Dokuz Eylul University, Textile Engineering
Department, Izmir, TURKEY
ANTIBACTERIAL PROPERTIES OF
TEXTILE MATERIALS AFTER PLASMA
SURFACE MODIFICATION AND
ELECTROSPRAY TECHNIQUE
17:00 – 17:15 S. Alibakhshi, et al. (187)
Biotechnology department, Malek Ashtar
University, Tehran, Iran
INVESTIGATION THE EFFECT OF
MEDIUM'S SURFACE VOLUME ON
MICROBIAL CELLULOSE NANOFIBRE
PRODUCTIVITY PRODUCED BY
ACETOBACTER XYLINUM
17:15 – 17:30 Y. Aykut, et al. (113)
Department of Textile Engineering, Uludag
University, Bursa, Turkey
SYNTHESIS OF LITHIUM COBALT
OXIDE NANOPLATES FROM A
NONWOVEN NANOFIBROUS MAT
Session 1 Session 2 Session 3 Session 4
L. Hes, et al. (220)
University of Liberec, Faculty of Textile
Engineering, Czech Republic
A PROPOSAL OF A NEW STANDARD
FOR DETERMINATION OF EFFECTIVE
WATER VAPOUR PERMEABILITY OF
WET FABRICS
H. Gommel, et al. (351)
SGL Carbon GmbH, Meitingen, Germany
OVERVIEW OF SPREADING
TECHNOLOGIES AND THE EFFECTS
ON IMPREGNATION PROCESSES
A. Giehl (272)
DyStar Colours Distribution GmbH,
Frankfurt am Main, Germany
NEW TRENDS IN LIGHT FASTNESS
TESTING AND WEATHERING
19:30 – 23:00 CRUISE DINNER
X. Zeng (270)
Ecole Nationale Supérieure des Arts et
Industries Textiles, Roubaix, France
SMDTEX: A NEW EUROPEAN JOINT
DOCTORATE PROGRAMME ON
SUSTAINABLE MANAGEMENT AND
DESIGN FOR TEXTILES
M. Abylaev (356)
Swedish School of Textiles, University of
Borås, Sweden
KYRGYZ TEXTILE COMPANIES
RESILIENCE FEATURES IN
REGIONALIZATION PROCESSES OF
POST-SOVIET COUNTRIES
B. Namiranian, et al. (93)
Islamic Azad University, Yazd, Iran
THE EFFECT OF TYPE AND ORIENTION
ANGLE INTERLINING ON BOND
STRENGTH OF FUSIBLE FABRIC
N. Korkmaz, et al. (355)
Süleyman Demirel University, Textile
Engineering Department, Turkey
PREPARATION OF FLAME RETARDANT
AND CREASE RESISTANCE COTTON
FABRICS USING POLYCARBOXYLIC
ACIDS/ ALUMINIUM OXIDE
NANOCOMPOSITE COATING
G. Mengna, et al. (21)
Jiang Han University, Hubei,China
PRESSURE AND COMFORTABLE
FEELING OF WOMEN TORSO
(UPDATED)
N.M. KOCHANOVA et al. (166)
Ivanovo State Textile Academy, Russia
PREDICTION OF 3D SLEEVE SHAPES
BASED ON 2D PATTERN INDEXES

13th AUTEX World Textile Conference 2013 in Dresden - Final Programme - Wednesday May 22, 2013
Please note that the Organizers reserve the right to change the schedules.
Update: May 6, 2013
Session Topics
• Textile Economy, Textile Supply Chain Management
• Ecological and Environmental Textiles, Recycling and Life cycle Analysis
• Fashion – Design and Garment Industry
• Textile and Clothing Machinery
• Textile Processing (Spinning, Knitting, Weaving etc.)
• Textile Testing, Measuring Technology
• Finishing, Dyeing, Surface Functionalisation and Coating
• Biopolymers and Biotechnology
• Medical Textiles, Tissue Engineering, Implants
• Nanotechnology, Nanotextiles, Electrospinning
• MAPICC 3D
• Textile based Composites (Thermoplastic, Thermoset, Elastomeric, Concrete)
• CAE-Technology, Mass Customisation
• Modelling and Simulation
• Textile Membranes
• 2BFUNTEX Themes : Innovative Functional Textiles
• Technical Textiles
• Smart and Interactive Textiles
• Protective Textiles
• Advanced Fibres and Materials