PLANT SERVICE FROM INFRASERV KNAPSACK. IS IT POSSIbLE ...

Maintenance Process analysis technology
Maintenance optimisation
Customers can also make use of InfraServ Knapsack’s many years of experience in the maintenance of process industry
plant in a wide variety of sectors in the form of analysis and optimisation solutions. Based on holistic need- and processbased
analysis, optimised maintenance concepts for the whole lifecycle of the plant are developed and support provided
during their implementation.
Advice
Moderation
Training
Optimisation tools (e.g. lean maintenance, 5S method, FMEA, TPM, Technical Risk Management)
10
CAN SAFETY
bE SuPPLIEd
ON AN INduSTRIAL
SCALE?
Process analysis technology from InfraServ Knapsack.
In the process industry in general – and in the chemical sec-
tor in particular – aspects such as product quality, environ-
mental protection and health and safety are heavily influ-
enced by the concentrations on site of various substances
and raw materials. Depending on the context, the slightest
deviation can have serious consequences. Process analysis
technology supplied by InfraServ Knapsack provides highly
reliable systems for continuous measurement and recording
of concentrations at your plants. Measurement results are
available instantly.
To ensure optimum technical safety and quality, the service
package from InfraServ Knapsack encompasses much more
Formulating and agreeing
requirements with the customer
Concept development/
application advice
Selection of measurement
procedures and/or analyser type
Production of analysis system
Assembly of on-site analysis
system/off-site assembly
Commissioning
Integration into existing process
control system
Sample conditioning
than just the technology employed. At the project planning
stage, customers receive vendor-independent advice on how
to use various measurement procedures to devise analytics
that are economical to operate yet always transparent and
appropriate to their specific circumstances. Our engineering
experts can also be involved at this stage – manufacturing
components in-house enables us to produce the required
analysis systems on an individual basis. After installing the
systems, InfraServ Knapsack will also retain responsibility
for ongoing maintenance, carrying out inspections, servicing,
calibration and providing a 24-hour fault elimination
service.
PROJECT PLANNING /
PRODUCTION ASSEMBLY MAINTENANCE
Maintenance and inspection
Repair, fault elimination
Calibration and alignment
11