PDF katalog - kliknite ovde - NIP Spasić
PDF katalog - kliknite ovde - NIP Spasić
PDF katalog - kliknite ovde - NIP Spasić
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
www.nipspasic.rs
O KOMPANIJI<br />
Kompanija „<strong>NIP</strong> SPASIĆ“ d.o.o. lider je u proizvodnji<br />
propratnog materijala za fasadne termoizolacione<br />
sisteme za građevinske objekte. Svoj put do<br />
današnje pozicije započela je davne 1985. godine<br />
i do dan danas sačuvala status porodične firme, ali<br />
transformisane u modernu proizvodnu kompaniju<br />
koja za svoj primarni cilj ima uspostavljanje i negovanje<br />
saradnje sa multinacionalnim trgovačkim<br />
kompanijama. U vlasništvu firme nalaze se poslovne<br />
prostorije u površini od 2.500 m², kao i<br />
zemljište u površini od preko 20.000 m².<br />
Dobar vizionarski duh i umeće poslovanja dokazali<br />
su kroz dugogodišnje uspešno poslovanje, gde je<br />
akcenat uvek bio na proširenju asortimana proizvoda<br />
i kapaciteta, ulaganje u nove tehnologije i<br />
ljudske resurse, kao i na praćenju tržišta, ne samo<br />
domaćeg, nego i inostranog.<br />
Poslovna politika kompanije fokusirana je na<br />
pozicioniranje i plasman proizvoda na zahtevno<br />
inostrano tržište , što će biti značajno olakšano<br />
sticanjem kandidature Republike Srbije za članstvo<br />
u EU, kao i ulazak u Uniju.<br />
Kompanija „<strong>NIP</strong> SPASIĆ“ aktivno učestvuje u humanitarnim<br />
akcijama, od kojih izdvaja donatorstvo<br />
za Srpsku Pravoslavnu Crkvu i pomoć humanitarnoj<br />
organizaciji „Dečije srce“.<br />
OPREMA I TEHNOLOGIJA<br />
Kompanija „<strong>NIP</strong> SPASIĆ“ kontinuirano unapređuje<br />
svoje pogone kupovinom isključivo nove proizvodne<br />
opreme od renomiranih i pouzdanih<br />
proizvođača iz Zapadne Evrope, a koja zadovoljava<br />
najzahtevnije regulative o zaštiti životne sredine<br />
propisane od strane Evropske Unije. Takođe, svi<br />
materijali koji ulaze u proizvodnju poseduju ateste<br />
o zaštiti životne okoline. Kompanija radi u skladu<br />
sa propisima Zakona o bezbednosti i zdravlja na<br />
radu, uz stručnu pomoć instituta MD Projekt iz<br />
Niša. Kompanija „<strong>NIP</strong> SPASIĆ“ neguje načela korporativne<br />
odgovornosti, profesionalne etike i internih<br />
korporativnih standarda.<br />
COMPANY<br />
THE COMPANY “<strong>NIP</strong> SPASIC” Ltd. Is a leader in the<br />
production of supporting material for the façade<br />
thermal insulation systems for buildings. Their way<br />
to the present position started back in 1985th and<br />
to this day preserved the status of family business,<br />
but in the same time business is transformed into<br />
a modern production company. The company<br />
primary goal is to establish and foster cooperation<br />
with multinational trading companies. Te Company<br />
has own business premises and located in the area<br />
of 2,500 m², and the land area is over 20,000 m².<br />
A good visionary spirit and business skills have<br />
proven through years of successful operation,<br />
where the emphasis was always on the expansion<br />
of product range and capacity, investments in<br />
new technology and human resource, as well as<br />
monitoring the market, not only domestic but also<br />
foreign.<br />
The Company policy is focus on positioning and<br />
marketing product on demanding international<br />
markets, which will be significantly facilitated if<br />
Serbia becomes EU member.<br />
THE COMPANY “<strong>NIP</strong> SPASIC” is actively involved in<br />
humanitarian activities; some of those donations<br />
are for the Serbian Orthodox Church and at the<br />
same time as well in charity “Children Heart”.<br />
EQUIPMENT AND TECHNOLOGY<br />
The Company “<strong>NIP</strong> SPASIC” continuously improving<br />
its facilities by purchasing new production equipment<br />
only from reputable and reliable manufactures<br />
from Western Europe. The means that the<br />
company follows the most demanding regulation<br />
on environmental protection provided by the EU.<br />
Furthermore, all materials entering into production<br />
have certificates of environmental protection. The<br />
company operates based on Government Regulations<br />
of “Health and Safety” at work, with assistance<br />
of the Institute MD project in Nis (town in south<br />
Serbia). Moreover, the company cherishes the<br />
principles of corporate responsibility, ethics and<br />
internal corporate standards.<br />
2 3
PROIZVODNI PROGRAM<br />
Proizvodni program kompanije „<strong>NIP</strong> SPASIĆ“<br />
koncipiran je na proizvodima koji zadovoljavaju<br />
visoke standarde kvaliteta i pouzdanosti. Već više<br />
od 15 godina kompanija se bavi proizvodnjom<br />
propratnih materijala za fasadne termoizolacione<br />
sisteme. Snaga ovih proizvoda leži i u činjenici što<br />
su svi proizvodi standardizovani, tako da zadovoljavaju<br />
i potrebe inostranih kupaca, te se poslovanje<br />
firme „<strong>NIP</strong> SPASIĆ“ bazira na saradnji sa kupcima van<br />
granica Srbije, što u procentualnom delu od ukupne<br />
proizvodnje pokriva preko 70 odsto.<br />
PROIZVODI:<br />
• plastični tiplovi (dimenzija od 70mm do 200mm)<br />
• PVC ugaona lajsna sa mrežicom<br />
• PVC okapna lajsna sa mrežicom<br />
• PVC lučna lajsna<br />
• trakasta lajsna<br />
• APU lajsna 6+9mm; 9+15mm<br />
• APU lajsna sa mrezicom<br />
• aluminijumski početni profili<br />
• distanceri<br />
• spojnice<br />
• ekseri za ondulinu<br />
PRODUCTION PROGRAM<br />
The production program of “<strong>NIP</strong> SPASIC” was<br />
conceived on product that meets high standards<br />
of quality and reliability. For more than 15 years,<br />
Company is engaged in the production of supporting<br />
materials for the facade thermal insulation systems.<br />
The strength of those products lies in the fact that<br />
all products are standardized to meet the need of<br />
international customers and that is why the business<br />
is based on cooperation with customer outside of<br />
Serbia, as a percentage of the total production area<br />
covers over 70%.<br />
PRODUCTS:<br />
• plastic anchors for exterior insulation finishing<br />
systems (eifs) (size from 70 mm to 200 mm)<br />
• PVC corner bead<br />
• PVC corner bead with drip<br />
• PVC angle bead<br />
• PVC bead with adjusment angle<br />
• PVC bead with adjusment angle with fiberglass mesh<br />
• Window connecting and covering profile<br />
• The initial aluminium profiles<br />
• Spacers for the initial aluminium profiles<br />
• Circular pad<br />
• Nails for corrugated board<br />
5
1 2 3 4 5<br />
PLASTIČNI TIPLOVI ZA FASADNE<br />
TERMOIZOLACIONE PLOČE<br />
Opis proizvoda: Tipla sa kružnim podmetačem sa<br />
plastičnim udarnim klinom<br />
Materijal: HDPE<br />
Primena: Za mehaničko fiksiranje fasadnih<br />
termoizolacionih ploča (stiropor, stirodur,...).<br />
Mehaničke karakteristike:<br />
• sila izvlačenja iz betona i pune opeke 0,8 KN (80 kg/m²)<br />
• sila izvlačenja iz zidnog bloka 0,8 KN (80 kg/m²)<br />
Naziv proizvoda /<br />
Product Name<br />
PLASTIC ANCHORS FOR EXTERIOR<br />
INSULATION FINISHING SYSTEMS<br />
(EIFS)<br />
Product description: anchor with circular pad with a<br />
plastic hammer wedge<br />
Material: HDPE<br />
Application: for mechanical fixing of facade insulating<br />
boards.<br />
Mechanical characteristics:<br />
• pull-outforce from the concrete and brick 0.8 KN (80 kg / m²)<br />
• pull-outforce from the wall blocks 0.8 KN (80 kg / m²)<br />
Dužina /<br />
Length<br />
Ø<br />
Pakovanje (kom.) /<br />
Packing (pcs.)<br />
1 Plastični tiplovi / Plastic anchors 70/10 L - 70 mm 10 250<br />
2 Plastični tiplovi / Plastic anchors 100/10 L-100 mm 10 250<br />
3 Plastični tiplovi / Plastic anchors 110/10 L-110 mm 10 250<br />
4 Plastični tiplovi / Plastic anchors 120/10 L-120 mm 10 250<br />
5 Plastični tiplovi / Plastic anchors 140/10 L-140 mm 10 250<br />
6 Plastični tiplovi / Plastic anchors 160/10 L-160 mm 10 250<br />
7 Plastični tiplovi / Plastic anchors 200/10 L-200 mm 10 250<br />
6 7
PVC UGAONA LAJSNA<br />
Opis proizvoda: PVC ugaona lajsna sa staklenom mrežom<br />
Materijal: PVC, staklena mrežica<br />
Primena: Za jednostavno ojačanje i oblikovanje uglova fasada, štiti ivice zidova od<br />
mehaničkih oštećenja.<br />
Prednosti: Staklenu mrežu nije potrebno naknadno preklapati preko ivice zato<br />
što je ona fabrički zalepljena. Tako se ubrzava vreme montaže i dobija na kvalitetu<br />
završnog rada. Otvori na PVC lajsni omogućavaju lako nanošenje lepka na<br />
podlogu.<br />
Dužina lajsne<br />
Length molding<br />
Dimenzije staklene mreže<br />
Dimensions fiberglass mesh<br />
Pakovanje<br />
Packing<br />
2,5 m 10+10 cm 125 m<br />
2,5 m 10+15 cm 125 m<br />
2,5 m X + Y cm* 125 m<br />
x+y* dimenzije po izboru kupaca<br />
x+y* dimensions on customer choice<br />
PVC CORNER BEAD (BATTEN)<br />
Product description: PVC corner bead with fiberglass mesh<br />
Material: PVC, fiberglass mesh<br />
Applications: for simple reinforcement and forming corners of facades, protect<br />
walls edges from mechanical damage.<br />
Advantages: the glass meets is not required subsequently folded over the edge<br />
because it is glued. That speeds up installation time and gets to the quality of the<br />
final work. Ports on PVC batten enables to apply adhesive to the substrate.<br />
PVC CORNER BATTEN (BEAD)<br />
8 9<br />
PVC UGAONA LAJSNA
PVC LAJSNA SA OKAPNICOM<br />
Opis proizvoda: PVC lajsna sa okapnicom i staklenom mrežom<br />
Materijal: PVC, staklena mrežica<br />
Primena: Koristi se za formiranje okapnice kod donje ivice balkona i kod prozora.<br />
Sprecava podlivanja vode na svim kriticnim mestima(ispod krovova, na pocetnim<br />
delovima fasada,...)<br />
Prednosti: Sprečava vraćanje vode ispod balkona i time sprečava vlaženje,<br />
smrzavanje i otpadanje maltera.<br />
Dužina lajsne<br />
Length molding<br />
Dimenzije staklene mreže<br />
Dimensions fiberglass mesh<br />
Pakovanje<br />
Packing<br />
2,5 m 10+10 cm 50 m<br />
2,5 m 10+15 cm 50 m<br />
2,5 m X + Y cm* 50 m<br />
x+y* dimenzije po izboru kupaca<br />
x+y* dimensions on customer choice<br />
PVC CORNER BEAD WITH DRIP<br />
Product description: PVC profile with fiberglass mesh<br />
Material: PVC, fiberglass mesh<br />
Application: used to formats with drip of the bottom of windows and balconies.<br />
Advantages: prevents floods under the balcony, and thus prevents wetting, freezing<br />
and falling plaster.<br />
PVC LAJSNA SA OKAPNICOM<br />
PVC CORRNER BATTEN WITH DRIP<br />
10 11
PVC ANGLE BATTEN<br />
PVC LUČNA LAJSNA<br />
Opis proizvoda: Zaštitnik ivica zidova i gips ploča za lukove i svodove. PVC lajsna<br />
je napravljena od specijalne vrste PVC granulata, isperforirana tako da može da se<br />
savija u krug.<br />
Materijal: PVC<br />
Primena: Zaštitnik ivica za lukove i svodove.<br />
Prednosti: Omogućava lako formiranje preciznih ivica koje su otporne na mehanička<br />
oštećenja, tako da pored mehaničke zaštite imamo i znatno brži i lakši rad.<br />
Dužina lajsne /<br />
Length molding<br />
Širina lajsne /<br />
Width molding<br />
Pakovanje /<br />
Packing<br />
2,5 m 23x23 mm 250 m<br />
2,5 m 31x31mm 250 m<br />
PVC ANGLE BEAD<br />
Product description: protector walls edge and the arches and vaults. PVC batten<br />
is made of a special type of PVC granules, dotted so that it can be<br />
bent into a circle.<br />
Material: PVC<br />
Application: edge protector for arches and vaults.<br />
Advantages: allows easy creation of precise edges that are resistant to mechanical<br />
damages, so in addition of protection, have a much faster and easier installation.<br />
12 13
APU LAJSNE<br />
(lajsne za kvalitetniju unutrašnju obradu otvora na stambenim objektima)<br />
Opis proizvoda: PVC lajsne sa penastom i duplofan folijom<br />
Materijal: PVC, penasta traka, duplofan traka<br />
Primena: Služi za kvalitetniju, bržu i jednostavniju obradu delova oko prozora,vrata i<br />
svih otvora (sa unutrašnje strane), i kada je u pitanju materijal sa unutrašnje strane, i<br />
kada je u pitanju obrada gipsanih ploča.<br />
Prednosti: Kvalitet, brzina i jednostavnost ugradnje se ogledaju u tome što penasta<br />
traka sprečava pucanje maltera u predelu do prozora (predstavlja dilatacionu<br />
zaštitu), olakšava i ubrzava malteraciju, i ujedno (zajedno sa folijom koja se lepi na<br />
duplofan traku) štiti stolariju od prljanja za vreme procesa malterisanja (pa nema<br />
potrebe za dodatnim čišćenjem stolarije - dobija se na uštedi vremena).<br />
Širina / Width Dužina / Length Pakovanje / Packing<br />
6+9 mm<br />
1,5 m<br />
2,4 m<br />
45 m<br />
72 m<br />
9 +15 mm<br />
1,5 m<br />
2,4 m<br />
45 m<br />
72 m<br />
WINDOW CONNECTING AND COVERING PROFILE<br />
Product description: PVC profile with foam tape and double adhesive tape<br />
Material: PVC, foam tape, double adhesive tape<br />
Application: this is for quality, faster and simpler processing areas around the<br />
windows (inside), and when it comes to material on the inside, as well as processing<br />
gypsum boards.<br />
Advantages: quality, speed and simplicity of installation are reflected in the fact that<br />
foam foil prevents from cracking plaster in the window area (dilatationly protection),<br />
makes easier and faster for plastering, and also (along with the foil that sticks to the<br />
double sticky tape) protects from window dirt during the plastering process (so no<br />
need for additional cleaning of windows, you get to save the time).<br />
WITH FOAMFIX, DOUBLE ADHESIVE FILM SA PENASTOM I DUPLOFAN FOLIJOM<br />
APU LAJSNA SA MREŽICOM<br />
(lajsne za kvalitetniju spoljašnju obradu otvora na stambenim objektima)<br />
Opis proizvoda: PVC lajsne sa penastom i duplofan folijom i staklenom mrežicom<br />
Materijal: PVC, penasta traka, duplofan traka, staklena mrežica<br />
Primena: Služi za kvalitetniju, bržu i jednostavniju obradu delova oko prozora,vrata i<br />
svih spoljasnjih otvora na fasadama .<br />
Prednosti: Sprečava pucanje završnih slojeva fasade, kao i pojavljivanje vlage<br />
pored otvora kod termoizolacionih sistema. Lepi se na okvir otvora penastom<br />
folijom, staklena mrežica se preklapa na termoizolaciju i sa mrežom profila se<br />
može zagletovati. Pre gletovanja, zaštitna traka se lepi na delu profila sa koga smo<br />
odstranili jednu stranu duplofan folije. Posle gletovanja zaštitina traka se skida<br />
zajedno sa delom PVC profila koji se lako odvaja od samog profila.<br />
Dužina / Length Pakovanje / Packing<br />
2,5 m 50 m<br />
WINDOW CONNECTING AND COVERING PROFILE<br />
WITH FIBERGLASS MESH<br />
Product description: PVC profile with foam tape and double adhesive tape,<br />
with fiberglass mesh<br />
Material: PVC, foam tape, double adhesive tape, fiberglass mesh<br />
Application: this is for quality, faster and simpler processing areas around<br />
the windows (outside),<br />
Advantages: prevents from cracking finishing facades, prevents occurrence of<br />
moisture ports on thermal insulation system. Sticks to the frame opening foamfix,<br />
fiberglass mesh switches to the thermal insulation systems and with mesh profiles<br />
can be plastering. Before plastering protective film is sticks part of the profile from<br />
which we removed one side duplofan folije.After plastering protective film is removed<br />
with part PVC profile which can be profile which can be removed of profiles.<br />
14 15
PODESIV UGAO<br />
ADJUSTABLE ANGLE<br />
PVC LAJSNA SA PODESIVIM UGLOM<br />
BEZ STAKLENE MREŽE<br />
Opis proizvoda: PVC lajsna napravljena od specijalne vrste PVC-a u obliku trake,<br />
ali je savitljiva i ugao se podešava po potrebi.<br />
Materijal: PVC<br />
Primena: Zaštitnik ivica uglova od 30° do 180° (npr. kod potkrovlja)<br />
Prednosti: Prilagođava se ivicama različitih uglova, omogućava lako formiranje<br />
preciznih ivica koje su otporne na mehanička oštećenja, tako da pored mehaničke<br />
zaštite imamo i znatno brži i lakši rad.<br />
PVC BEAD WITH ADJUSTMENT ANGLE<br />
Product description: PVC bead is made from a special type of PVC in the form of<br />
tapes, but it is flexible and the angle is adjusted, as it needed.<br />
Material: PVC<br />
Širina / Width Pakovanje / Packing<br />
23x23 mm 100 m<br />
Application: with a blunt edge protector corner (eg. penthouse)<br />
Advantages: adapts to the edges of different angles, enabling easy creation<br />
of edges that are resistant to mechanical damage, so that in addition to the<br />
mechanical protection we have a much faster and easier operation.<br />
PVC LAJSNA SA PODESIVIM UGLOM,<br />
SA STAKLENOM MREŽOM<br />
Opis proizvoda: PVC lajsna napravljena od specijalne vrste PVC-a u obliku trake,<br />
ali je savitljiva i ugao se podešava po potrebi. Na lajsnu je fabrički zalepljena<br />
staklena mrežica.<br />
Materijal: PVC, staklena mrežica<br />
Primena: Zaštitnik ivica spoljšnjih uglova od 30° do 180°.<br />
Prednosti: Prilagođava se ivicama različitih uglova, omogućava lako formiranje<br />
preciznih ivica koje su otporne na mehanička oštećenja tako da pored mehaničke<br />
zaštite imamo i znatno brži i lakši rad.<br />
Dužina<br />
Length<br />
Širina<br />
Width<br />
Dimenzije staklene mreže<br />
Dimensions fiberglass mesh<br />
Pakovanje<br />
Packing<br />
2,5 m 23x23 mm 10+10 cm 100 m<br />
2,5 m 23x23 mm 10+15 cm 100 m<br />
2,5 m 23x23 mm X + Y cm* 100 m<br />
x+y* dimenzije po izboru kupaca<br />
x+y* dimensions on customer choice<br />
PVC BEAD WITH ADJUSTMENT ANGLE<br />
WITH FIBERGLASS MESH<br />
Product description: PVC bead is made from a special type of PVC in the form<br />
of tapes, but it is flexible and the angle is adjusted as needed. Trim is pre-taped<br />
fiberglass mesh.<br />
Material: PVC, fiberglass mesh<br />
Application: protector of wall edge in outward angles from 30 to 180 degrees<br />
Advantages: adapts to the edges of different angles, enabling easy creation<br />
of edges that are resistant to mechanical damage in addition to the mechanical<br />
protection we have a much faster and easier installation. PVC batten with<br />
adjustment angle with fiberglass mesh netting Dimensions Length<br />
16 17
ALUMINIJUMSKI PROFILI<br />
POČETNI ALUMINIJUMSKI PROFILI<br />
Opis proizvoda: Početni profili napravljeni od aluminijuma u obliku su U profila sa<br />
perforiranom okapnicom<br />
Materijal: Aluminijum<br />
Primena: Početni profili za fasadne termoizolacione ploče<br />
Prednosti: Pored znatno olakšanog i ubrzanog rada sprečava ulaženje vlage ispod<br />
termoizolacionih ploča. Uz to štiti izolaciju od ulaska glodara i buba ispod fasade.<br />
Širina / Width Pakovanje / Packing<br />
20 mm 20 m<br />
30 mm 20 m<br />
40 mm 20 m<br />
50 mm 20 m<br />
60 mm 20 m<br />
70 mm 20 m<br />
80 mm 20 m<br />
100 mm 20 m<br />
120 mm 20 m<br />
THE INITIAL ALUMINIUM PROFILES<br />
Product description: the initial profiles made of aluminum in the shape of U of the<br />
profile with perforated drip<br />
Material: aluminum<br />
Application: initial profiles for insulating panels.<br />
Advantages: in addition to substantially facilitated and accelerated work prevents<br />
moisture intrusion below insulating plate. In addition to protecting the insulation and<br />
the entry of rodents and bugs beneath the facade.<br />
18 19<br />
ALUMINIUM PROFILES
DISTANCERI (KAJLE)<br />
Opis proizvoda: Plastični distanceri koji omogućavaju ispravljanje neravnina na<br />
površinama<br />
Materijal: HDPE<br />
Primena: Obezbeđuju ravnomerno naleganje početnih profila na neravnu površinu.<br />
Prednosti: Ubrzavaju rad i smanjuju utrošak skupljih materijala (glet mase i sl.).<br />
Širina / Width Pakovanje (kom.) / Packing (pcs)<br />
3 mm 10<br />
5 mm 10<br />
8 mm 10<br />
10 mm 10<br />
SPACERS FOR THE INITIAL ALUMINIUM PROFILES<br />
Product description: spacers enables correction of surfaces<br />
Material: HDPE<br />
Application: provide uniform initial profile fitting of the uneven surface.<br />
Advantages: speed up and reduce consumption of expensive materials<br />
(plasters, etc.).<br />
20 21
EKSERI ZA VALOVITE PLOČE<br />
Opis proizvoda: Na naringovanom i pocinkovanom ekseru je nalivena plastična glava<br />
Materijal: Ekser, HDPE<br />
Primena: Služi za pričvršćivanje valovitih ploča.<br />
Prednosti: Plastična glava sprečava prodor vode na spojevima. Boja plastične glave<br />
je identična sa bojom valovitih ploča.<br />
Dužina /<br />
Length<br />
NAILS FOR CORRUGATED BOARD<br />
Product description: nail with plastic head<br />
Material: nail, HDPE<br />
Application: used for attaching corrugated panels.<br />
Ø<br />
Pakovanje (kom.) /<br />
Packing (pcs)<br />
70 mm 3 mm 100<br />
Advantages: plastic head prevents water penetration at joints. Color plastic head<br />
is identical with the color of corrugated board.<br />
22 23
ELEMENAT ZA SPAJANJE<br />
POČETNIH PROFILA (SPOJNICE)<br />
Opis proizvoda: PVC spojnica<br />
Materijal: PVC<br />
Primena: Kod spajanja početnih profila, pogotovo<br />
kod uglova.<br />
Prednosti: Lakši,brži i kvalitetniji rad.<br />
ELEMENTS CONNECTING THE<br />
INITIAL ALUMINIUM PROFILES<br />
(COUPLING)<br />
Product description: PVC coupling<br />
Material: PVC<br />
Application: connecting the initialaluminium profiles,<br />
especially at the corners<br />
Advantages: speed, quality and simplicity work<br />
Dužina /<br />
Length<br />
Pakovanje /<br />
Packing<br />
30 mm* 100 m<br />
* dimenzije po izboru kupaca<br />
* dimensions on customer choice<br />
24<br />
KOMPLET ZA POČETNE PROFILE<br />
Distancer + Spojnica + 6/40<br />
PACKAG FOR INITIAL<br />
ALUMINIUM PROFILES<br />
Spacers + Connecting elements + 6/40<br />
PEČURKA (KRUŽNI PODMETAČ)<br />
Opis proizvoda: Plastični kružni podmetač za<br />
fiksiranje termoizolacionih ploča<br />
Materijal: HDPE<br />
Primena: Služi za mehaničko fiksiranje termoizolacionih<br />
fasadnih ploča, pri čemu se koriste samonarezujući vijci<br />
ili vijci za drvo. Koriste se za površine poput OSB ploča<br />
iverice ili metalnih ploča.<br />
Prednosti: Zbog svog oblika mogu se koristiti na<br />
svim teško dostupnim mestima. U kombinaciji sa<br />
odgovarajućim vijcima ostvaruje se sigurno usidrenje u<br />
podlogu.<br />
CIRCULAR PAD<br />
Product description: a circular plastic pad for fixing<br />
insulating boards.<br />
Material: HDPE<br />
Application: used for mechanical fixing insulating<br />
board. It is used for areas such as PLC OSB, plywood<br />
or metal panels.<br />
Advantages: Because of its shape it can be used<br />
wherever is hard to reach. In combination with the<br />
appropriate screws securely anchoring is realized in the<br />
background.<br />
Dimenzija /<br />
Dimensions<br />
Pakovanje (kom.) /<br />
Packing (pcs)<br />
58 mm 100 m<br />
GDE SE NALAZIMO<br />
Kompanija „<strong>NIP</strong> SPASIĆ“ je veoma dobro pozicionirana, što bitno olakšava<br />
komunikaciju sa klijentima. Naime, preduzeće je locirano u Srbiji, uz panevropski<br />
drumski (2.300 km dužine) i železnički (2.525 km) Koridor 10 koji se prostire<br />
od Austrije do Grčke. U industrijskoj zoni grada Ćuprija, na 133 km južno od<br />
Beograda.<br />
WHERE WE ARE<br />
The Company “<strong>NIP</strong> SPASIC” is very well positioned, which makes easier<br />
communication on international level with clients. Moreover, the company is<br />
located in the European Road (2,300 km in length) and railway (2,525 km) Corridor<br />
10, which extends from Austria to Greece. Ćuprija is situated 133 km east from<br />
Belgrade.<br />
25
REFERENCE<br />
Kompanija „<strong>NIP</strong> SPASIĆ“ spada u grupu vodećih dobavljača multinacionalne<br />
kompanije „Masterplast Group International“ iz Mađarske. Takođe se nalazi<br />
na referentnoj listi multinacionalne kompanije „Lorenčić“ iz Austrije i jedan je od<br />
glavnih dobavljača preduzeća RTM iz Banja Luke koja posluje u svim zemljama<br />
bivše Jugoslavije.<br />
U Republici Srbiji „<strong>NIP</strong> SPASIĆ“ sarađuje sa svim najvećim sistemima stovarišta<br />
građevinskog materijala, kao i sa svim velikim distributerima građevinskih<br />
materijala za završnu obradu: Termodom, Vanas, Zlatići, Ča-Term, Izodekor, Print<br />
komerc, Mušović, Jonimpex....<br />
REFERENCE<br />
Special purpose facilities with high thermal demands in Kopaonik ski resort (villa Jaram) - Serbia, at 1800m above sea level.<br />
The company “<strong>NIP</strong> SPASIC” is the leading supplier of multinational company<br />
“Masterplast Group International” from Hungary. The Company is also client<br />
of multinational company “Lorencic” Austria, and is one of the major suppliers of<br />
the “RTM” company from Banja Luka, which operates in all countries of Former<br />
Yugoslavia.<br />
In the republic of Serbia “<strong>NIP</strong> SPASIC” work with all major stocks and building<br />
material systems, as well as with all major distributors of buildings materials for<br />
finishing: “Termodom”, “Vanas”, “Zlatići”, “Ča-Term”, “Izodekor”, “Print komerc”,<br />
“Mušović”, “Jonimpex” etc.<br />
Objekti specijalne namene sa visokim termoizolacionim zahtevima u ski-centru Kopaonik (vile Jaram) - Srbija, na 1800m nadmorske visine.<br />
26 27
<strong>NIP</strong> <strong>Spasić</strong> d.o.o. – Sedište<br />
Kralja Petra I oslobodioca br.68<br />
35230 Ćuprija - Srbija<br />
tel. +381 35 477465<br />
fax +381 35 474176<br />
email: office@nipspasic.com<br />
<strong>NIP</strong> <strong>Spasić</strong> d.o.o. - Proizvodnja<br />
Rasputnica bb<br />
35230 Ćuprija - Srbija<br />
www.nipspasic.rs<br />
<strong>NIP</strong> <strong>Spasić</strong> d.o.o. – Head Office<br />
Kralja Petra I oslobodioca br.68<br />
35230 Ćuprija - Serbia<br />
tel. +381 35 477465<br />
fax +381 35 474176<br />
email: office@nipspasic.com<br />
<strong>NIP</strong> <strong>Spasić</strong> d.o.o. - Production<br />
Rasputnica bb<br />
35230 Ćuprija - Serbia<br />
u saradnji sa