CLXCD Series Single Jet Totalizing Water Meter - Clark Solutions

CLARK
CLXCD Series Single Jet Totalizing Water Meter
1/2” & 5/8 x 3/4” Sizes, With or Without Reed Switch Output
DESCRIPTION
Model series CLXCD meters are single-jet dry type totalizing
water meters. They are an ideal choice for a range of
sub-metering applications for apartment and commercial
buildings as well as marinas, RV and camping parks etc.
They are also used as “deduct” water meters for totalizing
water used for pools and irrigation that is not returned to
city wastewater systems as well as many OEM and industrial
applications where keeping track of consumed water
volume is important for meeting regulatory and environmental
requirements.
A pulse output of one pulse per gallon is available.
CLXCD meters are accurate and reliable. They are produced
in an ISO9001 certified production facility and are
constructed in conformance with AWWA standard
C712-02, ANSI/NSF 61 and NIST Handbook 44-2006, Section
3.36.
SPECIFICATIONS
GENERAL
Measuring Principle: Single Jet
Meter Type: Dry, magnetic coupling between rotor
and register movement
Meter Sizes: 1/2”, 5/8 x 3/4”
Max Media Temperature:
Cold Water Meter: 122 o F (50 o C)
Hot Water Meter: 194 o F (90 o C)
Max Operating Pressure: 150 PSI
Proof Pressure: 300 PSI
Materials:
Main Casing: Copper Alloy UNS C83600
Register Box Rings: Copper Alloy UNS C85700
Transparent Cover: Polycarbonate
Measuring Rotor: Polycarbonate
Rotor Spindles: 304 Austenitic Stainless Steel
Upper Plate: Polycarbonate
Bottom Plate: Polycarbonate
Register Gear Trains: POM
Worm Gear: POM
Registration Accuracy, with water

DIMENSIONS, CONNECTIONS & WEIGHT
Model Size
Table 2- Dimensions, Connections & Weights
L
Length
Inches
(mm)
W
Width
Inches
(mm)
H
Height
Inches
(mm)
Case
Spud Threads
(NPS)
Weight
lb (kg)
CLXC-15D 1/2” 4.33 (110) 2.87 (73) 2.83 (72) 3/4” 1.06 (0.48)
CLXC-20D 5/8 x 3/4” 5.12 (130) 2.87 (73) 2.83 (72) 1” 1.37 (0.62)
Meter Dial Layout
ORDERING INFORMATION
CLXC-A-B-C
EXAMPLE: CLXC-20D-C-S
A
Model
15D= 1/2”
20D= 5/8 x 3/4”
B
Hot or Cold
water Meter
C= Cold
H=Hot
C
Pulse Output
-= None
S= Pulse Output
Note:
Rubber washers are provided with each meter for sealing meter end of tailpiece
as a standard accessory. Washers can also be purchased separately:
Meter Size Washer Part Number
1/2” C15TW
3/4” C20TW
OPTIONAL TWO PIECE METER COUPLINGS (TAILPIECES)
Coupling
Part Number
C15T
C20T
Description
3/4” NPS female nut
to 1/2” NPT male
union
1” NPS female nut
to 3/4” NPT male
union
Length of
Coupling
Used With
Meter
Model
Quantity
needed
per meter
2-3/8” CLXC-15D 2
2-1/2” CLXC-20D 2
Bold Order Combinations Typically Ship From Stock
Clark Solutions 10 Brent Drive Hudson, MA 01749 Tel. 978 / 568 3400 Fax 978 / 568 0060