body & chassis accessories - Wildgoose Performance

Chrome Moly Pushrods
Pushrods are made from seam less
4130 Chrome moly steel tub ing, with
or without heat treating, and tensile
strength ratings up to 128,000 lbs.
Sold in sets of 16.
Part No. Description Diameter Length
1955-87 Chevy
CRN11621-16
5/16" 7.765" (Stock)
CRN11622-16
V-8 262-400, Heat Treated
1955-87 Chevy
V-8 262-400, Heat Treated
Valve Train Organizer Tray
CRN99015-1
Lightweight tray accepts rock ers, pushrods,
adjusting nuts, lifters, and spark
plugs. Keeps parts in cor rect order.
5/16" 7.865" (+.100")
Pro-Series Roller Chain Sets
With Steel Billet Gear
And Needle Thrust Bearing
Strong and accurate sets have CNCmachined
billet steel camshaft and crankshaft
sprockets and a rugged, double row roller
timing chain. The crankshaft sprocket has nine
key locations for up to 8° of advance or retard
adjustments.
Part No Description
CRN11984-1 .....SB Chevy 1955-87, 262-400 C.I., 90° V-6 1978-86, 200-262 C.I.,
Complete Set With Multiple Keyway Crank Sprocket And Machined To Fit
Thrust Washer
CRN44984-1 .....Ford 1973-00, 255-302, 351W C.I., Complete Set With Multiple Keyway
Crank Sprocket and Machined To Fit Thrust Washer
Cam Lock Plate And Bolt Kit
CRN99168-1
Secures cam timing sprock et bolts.
Fits 90° V-6 Chevy, SB and BB Chevy
1957-95.
Camshaft Buttons
Buttons prevent cam shaft “walk ing”.
Available in solid aluminum or roller
styles. Roll er bear ing reduces bind ing/
friction at cam nose.
CRN99001-1 CRN99164-1
Aluminum Part No. Roller Part No. De scrip tion
CRN99001-1 CRN99164-1 Chevrolet V-8 262 thru 400, 90° V-6
Ron Miller Photo By: Steve Datema
Fuel Pump Pushrods
Heat-treated, centerless-ground, tubular steel fuel pump pushrods
fi t both small and big block Chevrolets.
Part No. Description
CRN11985-1 .....Bronze Tipped Pushrod, Use With 8620 Steel Roller Camshafts
CRN11986-1 .....Steel Tipped Pushrod, Use With Cast Mechanical and Hydraulic Cams
Super Moly Lube
A moly-disulfi de based lu bri cant unequaled in wear
protection. For use on cam lobes, lifters, and dis trib u tor gears.
Recommended for all cam in stal la tions.
Part No. Description
CRN99002-1 .....2 Ounce Container
CRN99003-1 .....8 Ounce Container
CRN99004-1 .....1 Pound Container
En gine As sem bly Lube CRN99008-1
Provides extra lu bri ca tion and pro tec tion for
en gine com po nents dur ing assembly, ini tial fi ring
and critical break-in pe ri od. 4 oz. bottle.
Bronze Distributor Gears
Bronze gears are a must when using
roller type cams. Gears are machined
from high silicon copper alloy.
CRN11990-1
Part No. Description
CRN11979-1 .....SB And BB Chevy With .500" Shaft, MSD, Accel Distributors
CRN11990-1 .....SB And BB Chevy With .491" Shaft, Accel Distributors (Except BEI)
CRN44990-1 .....Ford 221-302 With .531" Shaft
HI-6N Oval Track Racing Ignition
CRN6000-6430
Multi-spark, CD ignition
supplies up to 12 sparks per
cylinder fi ring, increasing
power and eliminating plug
fouling. The built-in rev limiter
may be adjusted from 2,000-
9,900 RPM in 100 RPM increments without
plug-in modules. An LED status light aids
diagnostics, and a 6-pin Weatherpak plug meets
NASCAR rule 20-6.1. Wiring harness, hardware
and high performance racing LX92 ignition coil
are included.
ASA Late Model Series Ignition System
CRN6000-6363
Engineered for ASA Late Model
Series, fully assembled spec. ignition
system includes a single HI-6RL fully
digital, capacitive discharge ignition
with high output PS-92 coil and
aluminum mounting plate. Affi
xed with the ASA logo, unit has
a fi xed 6,300 rev limit per
sanction rules.
Part No. Description
CRN6000-6463 ........ Replacement Ignition Box
CRN730-0192 .......... Replacement Ignition Coil
202 CIRCLE TRACK PARTS AND ACCESSORIES
2011