Manual SIRIUS Motor Starter M200D AS-Interface Standard - Siemens
Manual SIRIUS Motor Starter M200D AS-Interface Standard - Siemens
Manual SIRIUS Motor Starter M200D AS-Interface Standard - Siemens
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Mounting/Connecting<br />
4.2 Connecting<br />
4.2 Connecting<br />
4.2.1 Solution Partner<br />
More connection technology products can be found in "<strong>Siemens</strong> Solution Partners"<br />
(www.siemens.com/automation/partnerfinder) under "Distributed Field Installation System".<br />
The Solution Partner Program provides you with a complete range of connection methods in<br />
all the versions available from your preferred suppliers. This gives you the competitive edge<br />
with cost-effective cables in any length and design.<br />
4.2.2 Required components/cables<br />
Selecting the power cables<br />
DANGER<br />
Hazardous Voltage<br />
Can Cause Death, Serious Injury, or Property Damage<br />
Before starting work, disconnect the system and devices from the power supply.<br />
The cross-section of the power cables must be suitable for the prevailing ambient conditions.<br />
The following factors determine the cross-section:<br />
● The current set on the device<br />
● The cable installation type<br />
● The ambient temperature<br />
● The type of material (PVC, rubber)<br />
<strong>M200D</strong> <strong>AS</strong>-<strong>Interface</strong> <strong>Standard</strong><br />
100 <strong>Manual</strong>, 09/2009, A5E02548958-01
Change language