Sivoia QED® |specification guide - Loyola Enterprises Inc. Audio ...

Sivoia QED® | drapery track system selection guide
Determine how
drapery track
will be installed
Mounting conditions
p Wall mount
p Ceiling mount
Track shape (pg. 60)
p Straight
p Curve
p Bend
Track type (pg. 57)
p Single
p Dual
p Tandem
p Dual/Tandem
Draw type
p Center draw
p Right draw
p Left draw
Drive side
p Right
p Left
* Drive is field mountable
and drive side can be
reconfigured on site
52 | Lutron
left or right stack
system width
stack= approx 1/3
(system width)
Take
system
measurements
Track length (inches)
= __________________
* Estimated opening
size is approximately 2/3 of
length left or right stackof
track split-draw center stack
system width
system width
** Estimated stack back each is stack
= approx 1/6
(system width)
stack= approx 1/3
(system width) approximately 1/3 of length
of track
left or right stack
system width
Left or right stack
stack =
approx. 1/3
system
width
stack= approx 1/3
(system width)
split-draw center stack
system width
Split-draw center stack
each stack
= approx 1/6
(system width)
each stack = approx.
1/6 system width
*** Refer to Shade Configuration
Tool (SCT) for exact opening
size and stack back
Determine
capacity
Drapery weight (lbs.)
= __________________
System measurements
will determine required
drapery capacity
System capacity*
p Standard capacity (105 lbs.)
p High capacity (150 lbs.)
(available summer 2008)
split-draw center stack
system width
* Capacities required depend
upon drape weight, track shape
each stack
= approx 1/6
(bend (system radius), width) and track length