Sampo Rosenlew 3000 SERIES - Sampo Grupp

Sampo Rosenlew 3000 SERIES

Sampo Rosenlew 3000 SERIES 

Type: Engine power: 

3065L - 200 hp / 220 hp 

3085L TS - 250 hp / 260 hp


• Cutting tables: 4,80 ; 5,10 ; 5,70 ; 6,3 ; 6,9M 

• Robust knife mechanism


• Feeding auger with 350 mm diameter 

• Distance fingers – Auger: 60,5 cm 

• Feed fingers on the whole width of cutting table (Ø 16 mm)


• Reel tines plastic or zink 

• Reel hydraulic operated range 

0 – 50 rpm


Available : 

• Multicoupling 

• Electrical Reverse drive 

• Hydraulic (manual) levelling 

up to 17%


• DHC (Direct Height Control )


• AHC = Autom. Height Control


Threshing system: 

2-drum threshing system 

Width 1.33 m diameter 500 mm ; 8 rasp bars 

Variator electr. 600 – 1.300 rpm 

Concave: 12 bars 105° angle; area 0,62 m² 

Adjustment electrical; 

Control from cabin

Sampo Rosenlew 3000 SERIE 

SR 3085 TS 

TWIN SEPARATION SYSTEM (TS)


Threshing system 3085 TS (Twin separator) 

Threshing drum Diameter 500 mm; 8 rasp bars 

Pre-threshing drum Diameter 400 mm 

Speed of pre-threshing drum = Speed of main threshing drum 

Advantages: 

- Larger separation area through pre-threshing drum and concave 

- Higher separation capacity 30 % 

- Optimal material flow to main drum 

- Careful handling of threshing material 

- Optimal grain quality 

- Higher capacity without additional fuel 

consumption. 

_


CONCAVES: 

TWIN SEPARATION SYSTEM 

Concave for pre-threshing drum: 7 bars 0,41 m² 

• Electrical adjustment 

• Monitoring next to adjustment bar (outside, right side) 

Concave for main threshing drum: 12 bars / 105 ° / 0,62 m² 

• Electrical adjustment 

• Control from cabin 

• Total concave area: 0,41 m² + 0,62 m² = 1,03 m² = 

LARGER SEPARATION AREA 

• Concaves individual, adjustments individually


Straw walkers 

Steps 

Total separations 

area [m 2 ] 

3065 L 

6 

4 

6,30 

High steps 19 cm 

3085L TS 

6 

4 

6,30


• 6 Straw walkers with four steps 

• Straw walker bottoms individually removable


Cleaning and maintenance 

• Cassette grain pan sections: 3 Segments, individually 

removable 

• Sieves: Lamell sieves above and below, electrical adjustment 

available 

• Sieve area: 4,10 m²


Return auger 

Threshes the returns efficiently and blows them 

to the front of shaker shoe


Grain tank 

• 3065L: 6.500 Liters electrically extendable 

• 3085L TS: 8.100 Liters electrically extendable 

• Unloading height 4.0 m


Engine 

• Water cooled Diesel engines 

• 3065 L 6,6 l 147 kW / 200 PS 

• 3065 L 7,4 l 162 kW / 220 PS 

• 3085 TS 7,4 l 184 kW / 260 PS 

• Reliable SISU DIESEL engines


Drives 

Hydrostatical drive 3+3 / 20 km/h 

Four wheel drive (BB hydraulic motors) available 

Tyres 

• front: 650 / 800 / 900 / 1050 /65R 38 

• rear: 380 / 480 / 540 /65 R 24


DeLuxe cabin 

• Deluxe seat 

• Buddy seat standard 

• 3-way adjustable steering column 

• Master Lever 

• AC, heating, radio 

• Loss monitors LH 500 3 variants 

• DHC or AHC 

• Air suspended Deluxe-Seat available. 

• Low volyme 77 dB Cabin


Master Lever 

• Driving direction : forward , back 

• Driving speed: faster , slower 

• Reel : up , down 

• Reel: forward , backward 

• Reel: faster , slower 

• Cutting table manual levelling: left , right 

• Unloading pipe: open, close 

• AHC / DHC


Monitors 

• Loss monitor LH 500 Standard 

• Loss monitor LH 500 Medium 

• Loss monitor LH 500 Maximum 

LH 500 Standard 

- Speed monitoring 

- Loss control from sieves and straw walkers 

LH 500 Medium 

- as LH500 + 

- Rpm speed monitoring 

- Area monitoring 

- Time monitoring 

- Grain tank control 

- Automatical control of reel 

speed adjusted by driving 

speed 

LH 500 Maximum 

as LH 500 Medium 

+return auger monitoring

LH500 maximum version 

operating keys 

sieve losses s.walkers losses 

hectares time 

reduced 

working 

width 

speed amount of returns 

reel automatic 

icon 

combine functions 

work screen 

main menu


High speed straw chopper 

• Simple, fast change from straw chopper mode to long straw 

mode. 

• Electrical adjustment of vanes available. 

Chaff spreader 

• Hydraulic drive 

• Easy to use


Maintenance 

• Easy access to checking and cleaning points 

• Large side guards and door on the rear wall / straw hub 

• Easy maintenance for threshing drum 

• Augers easy removable individually


Easy maintenance 

• Grain pan divided 3 segments, easily removable 

• Easy access to straw walkers through door on the straw hub, 

zinked straw walker bottoms removable 

• Easy access to engine

SR3000 SERIES combine harvesters 

• Models with 200 / 220 / 250 / 260 HP in 6-walker range 

• High capacity cutting tables from 4,80 to 6,90 m 

• Twin separation system available for 3085L TS 

• 6 straw walkers with 4 steps and total separation area of 6,30 

m² 

• Sieve area with removable grain pan segments and total area of 

4,10 m² 

• Re-threshing device at the top of the return auger threshes the 

returns efficiently and blows them to the front of shaker shoe 

• Integrated straw chopper with lever from chopper mode to long 

straw mode 

• Excellent maintenance and cleaning with large guards

Sampo Rosenlew 3000 SERIES - Sampo Grupp

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?