Heavy Duty Mortise Lock - Orion Hardware

FOR DOORS: 1.375"(35mm) to 1.75" (45mm) thick.
BACKSET: 2 1/2” (60mm) - 2 3/4" (70mm)
CASE: Stainless steel, 5.47" x 3.5" x O.787"
(139 x 89 x 20mm)
FRONT: Forged brass, 8" x 1.25" x 0.218"
(203 x 32 x 6mm) Adjustable for beveled
conditions from flat to 0.125" in 2"
(3mm in 51mm) bevel, either hand.
ARMOURED FRONT: Brass, Polished
LATCH BOLT: Forged brass antifriction, 0.625" x 1" (16 x 25mm),
0.75 " (1-19mm) throw. Reversible.
GUARD BOLT: Brass, simultaneously retracts with latch bolt.
DEAD BOLT: Forged brass, 0.5" x 1.181" (13 x 30mm)
1" (25mm) throw with two saw-proof
hardened steel inserts.
HUBS: Forged brass, 0.315" (8 mm) with two way
rotation. Broached on the octagon & diamond,
(one-way rotation or) strength function.
C
R12921 R12921
M1 Series
Available with:
RT series lever trims
P100 series lever and plate trims
P200 series lever and plate trims
P300 series lever and plate trims
(UL approval for fire test 3 hours)
PATENT.
USA:4988133
CANADA:2003262
IHeavy Duty Mortise LockI
SPRINGS: Stainless steel, compression and coiled torsion.
SPACING: C. to C. Lever hub to cylinder, 3.437" (87mm)
C. to C. Lever to turn piece, 2.25" (57mm)
KEYS: Two, brass.
CYLINDER: Solid brass, 5-pins tumbler
Can be Keyed Different, Keyed Alike,
Masterkeyed & Grand Masterkeyed.
Accepts standard 1 - 5/32" diameter, threaded
round mortise
STRIKE: Brass, Polished. 4.875" x 1.25 x O.093"
(124 x 32 x 2.4mm).
Curved lip (not handed) and special length
strikes available
EXPOSED TRIMS: Forged brass, Polished

HIHeavy Duty Mortise LockI
Outside Inside
FUNCTION
Passage
Privacy
Office
Entrance
Apartment Corridor
Vestibule
Classroom
Storeroom or Closet
Storeroom
Hotel
Single Dummy
Double Dummy
Series
Function
M110
M140
M150
M153
M156
M160
M170
M180
Privacy or
Bathroom
M1 Series Function Chart
Type ANSI No. Function Description
Passage
or Closet
Office
or Entry
Entrance
APARTMENT
CORRIDOR
Classroom
Storeroom
or Closet
Hotel or
Motel
F01
F02/F19
F04
F11/F12
F13
F09
F05
F07
M181 Storeroom F14
M185
D285
Vestibule
Single
Dummy
F15
D290 Double -
Dummy
ANSI
NO.
F01
F02/F19
F04
F11/F12
F13
F09
F05
F07
F14
F15
-
-
-
ORION
M1 SERIES
M110
M140
M150
M153
M156
M160
M170
M180
M181
M185
D285
D290
Latchbolt operated by lever from either side at all times.
Latchbolt operated by lever from either side except when turnpiece projects deadbolt and locks outside lever.
Unlocked by turning inside lever, (simultaneously retraction) or by using emergency key which retracts the
deadbolt.
Latchbolt operated by lever from either side except when outside lever is made inoperative by push button
rocker. When outside lever is locked, latchbolt may be retracted by key from outside or by rotating inside
lever. *** Auxiliary deadbolt latch.
Latchbolt operated by lever from either side except when outside lever is made inoperative by push button
rocker. Deadbolt projected by key from outside and by thumbturn from inside. Deadbolt retracted by key
from outside. Both bolts retracted by inside lever (simultaneous retraction) ***Auxiliary deadbolt latch.
Latchbolt operated by lever from either side. Deadbolt projected by key from outside and thumbturn from
inside. Rotating inside lever retracts both bolts (simultaneous retraction) Extended deadbolt automatically
deadlocks latchbolt.
Latchbolt operated by lever from either side except when outside lever is locked by inside key. Outside key
or inside lever will retract latch when locked. ***Auxiliary deadbolt latch.
Latchbolt operated by lever from either side except when outside lever is locked from outside by key. When
outside lever is locked, latchbolt may be retracted by inside lever, or outside lever, when cylinder is unlocked
by key. ***Auxiliary deadbolt latch.
Latchbolt operated by key from outside or by rotating inside lever. Outside lever is always inoperative.
***Auxiliary deadbolt latch.
Latchbolt operated by lever from either side.
Deadbolt by key on either side.
Latchbolt operated by key from outside or by rotating inside lever. Outside lever is always inoperative Deadbolt
operated by thumbturn from inside which shuts out all keys except emergency key. Inside lever will retract
both bolts (simultaneous retraction). ***Auxiliary deadbolt latch.
Fixed single dummy lever
Fixed double dummy lever
M1 Series Comparison Chart
ARROW
B SERIES
B01
B02
B22
B11
B19
B32
B17
B12
B31
B15
-
-
CORBIN/
RUSSWIN
2210
2220
2251
2267
2265
2242
2255
2257
2222
2229
-
-
SARGENT
7700/8100
13
65
5
45
25
16
37
4
26
50
-
-
SCHLAGE
L SERIES
L9010
L9040
L9050
L9453
L9456
L9060
L9070
L9080
L9466
L9485
-
-
P.D.Q.
ML SERIES
126
176
116
156
136
127
148
115
137
161
-
-
YALE
8701
8702
8707
8767
8722
8717
8708
8705
8760
8720
-
-

HIHeavy Duty Mortise LockI
Mortise Dead Lock
Model DL170 mortise dead lock case is made of heavy wrought steel, zinc plated, constructed with a 1” throw, 30 mm high x 13.55 mm
thick solid stainless steel dead locking deadbolt. Non-handed. The 0.95” wide adjustable armor front accommodates both thin or thick and
beveled or flat-edged doors. The lock case accepts standard mortise cylinder with “C1” cam.
Product Features:
Deadbolt: One piece construction stainless steel. 1” throw.
1.175 high x 0.53” thick
DL170 C1 Cam
Hub size: 5.3 mm on diamond.
Faceplate: Brass 1” w x 5.3/4”h
Strike: Brass 1 1/8” w x 3 1/2” h x 3/32” d
Finishes Available: Polished Brass
Polished Chrome
Satin Chrome
Satin Nickle
Note: Cylinders and thumbturns are not included.
Sample Specification
Strike
Function Location Operation
01 Cylinder by turnpiece Deadbolt by inside turnpiece or outside key.
03 Double Cylinder Deadbolt by key, either side.
04 Single cylinder Deadbolt by key from one side only.
05 Turnpiece Deadbolt by inside turnpiece.
Model DL170 01 Satin Chrome
Function
Finish

The designs of these mortis cylinders
are with reversible brass drill resistant
plug and fixed brass body. The
alignment of 6 pins which are
produced by computer machinery with
high precision is arranged vertically as
interface with drill resistant plug and
body. The length of pins creates
diverse number of combinations and
can be used as master key system.
Narrow and extended lip strikes for
Mortise locks are made of brass or
stainless steel and are available to
order from stock. Furnished with
mounting screws.
Solid Brass Mortise Cylinders
Strikes for M1 Series Locks
Model No. Size (Center to Lip)
SP01 1” (25mm)
SP02 (standard size) 1 1/4” (31mm)
SP03 1 5/8” (41mm)
SP04 1 7/8” (48mm)
SP05 2 1/4” (57mm)
Finishes Available: Polished Brass
Polished Chrome
Satin Chrome
Satin Nickel
To determain the width of strike you need, measure
half the thickness of the door plus the thickness of
the panel.
IHeavy Duty Mortise LockI
Schlage (S.C.) - Standard Kaba (K.B.) - Special order DCY - Special order
By using the 1/8” offset cam,
the dimensions under “L2” can
be achieved.
Model L1 Length L2 Length with Offset
118 1 1/8” 1 1/4”
114 1 1/4” 1 3/8”
112 1 1/2” 1 5/8”
134 1 3/4” 2”
Finishes Available: Polished Brass
Polished Chrome
Satin Chrome
Satin Nickel
Other finishes are available upon request