Envidas Ultimate Version Revision History - Envista ARM

Envidas Ultimate Version Revision History
Ver = Version Number
B/F = Bug/Feature
Ver Date Description B/F
1.2.195 2 Dec 2012 Wind Speed and Wind Direction will support all
statuses.
F
1.2.195 2 Dec 2012 Added ability to switch Radiance protocol push and poll,
also added a fix to read answer from right to left
F
1.2.194 26 Nov 2012 Added New Protocol Called "MWS9" Under "Reinhardt"
Protocols.
F
1.2.194 25 Nov 2012 Added new remote protocol name Sumx F
1.2.194 21 Nov 2012 Change the Range Deviation to setup two levels one for
the High and one for the low, Also ability to use Values
instead of % was added.
F
1.2.194 20 Nov 2012 Ability to show & hide pending calibrations in 2 Points
Calib Display screen
F
1.2.194 19 Nov 2012 Improving TEI Protocols: start analyze answer from
place of request
F
1.2.194 18 Nov 2012 Create DB will add FTP Import Export DB tables and
views
F
1.2.193 15 Nov 2012 Fix for save alerts per user table B
1.2.193 15 Nov 2012 Fix for decimal values during change in Ax +B from
Viewer
B
1.2.192 12 Nov 2012 New feature: Ability to change Ax+B during service run F
1.2.191 5 Nov 2012 Added new protocol called "Gesystec-II" Under "AMA"
Protocols
F
1.2.190 31 Oct 2012 Open sequence screen in digital items count size F
1.2.190 31 Oct 2012 Fixed - Option to get other status from ok and calm in
vector direction average
B
1.2.189 29 Oct 2012 Add diagnostics channel data even if there is no
channel answer
F
1.2.188 25 Oct 2012 Add Calm status to Vector speed F
1.2.188 25 Oct 2012 Fix for wind direction vector -9999 and status OK B
1.2.188 25 Oct 2012 Improvement: Re-send 3 tries of Email and SMS F
1.2.188 24 Oct 2012 Change STD zero default value to 0 in calibration B
1.2.188 17 Oct 2012 Fix for deleting alert when press it should not delete it B
1.2.187 17 Oct 2012 Added New Protocol Called "Photoacoustic
Extinctiometer" AKA PAX Under "DMT" Protocols
F
1.2.187 15 Oct 2012 Fix for TEI reading diagnostic command B
1.2.186 4 Oct 2012 Added digital monitor status and diagnostics default list
to TEI 5030I protocol
F
1.2.186 4 Oct 2012 Added digital monitor status default list to Grimm
protocol
F
1.2.185 3 Oct 2012 Fixed TEI17C zero and span mode and added digital
monitor status list to default list
B

1.2.185 24 Sep 2012 Re-open modbus port every minute and in catch
exceptions
F
1.2.184 24 Sep 2012 Close port for Enviurment SA protocol on every cycle F
1.2.184 24 Sep 2012 Re-open modbus port every hour and in catch
exceptions
B
1.2.184 23 Sep 2012 Added New Protocol Called "ISCO 4250" Under
"Teledyne_API" Protocols
F
1.2.183 20 Sep 2012 Using calm status in WindDirection average F
1.2.182 28 Aug 2012 Add poc and method code to channel configuration F
1.2.182 27 Aug 2012 Added Ability to set station and site details F
1.2.182 23 Aug 2012 Change factor format to show just three decimal places F
1.2.182 23 Aug 2012 Remove ability to work with secondary DB F
1.2.181 21 Aug 2012 Fix for Envidaq keep last result by cleaning the buffer
after receive data
B
1.2.181 20 Aug 2012 Fix for getting reference from different channel in
calibration
B
1.2.180 16 Aug 2012 Added trace to stop service F
1.2.179 13 Aug 2012 Add Weight values to stauts F
1.2.179 9 Aug 2012 Added New Protocol Called "BureauMetDevice" Under
"BureauMet" Protocols
F
1.2.179 8 Aug 2012 Added And Support new Status OK_OffScan F
1.2.179 8 Aug 2012 Added And Not Support yet new status Calm. F
1.2.178 31 Jul 2012 Fix Ultimate PLC Send address instead of viewPos in
Calib and Diagnostics
B
1.2.178 24 Jul 2012 Remove unknown status from calibration sequence B
1.2.178 24 Jul 2012 Remove compiling in user computer when update
software
B
1.2.178 24 Jul 2012 Fix sql error when running on sql 2000 B
1.2.177 23 Jul 2012 Fix for Range Deviation B
1.2.176 22 Jul 2012 Set first value to power fail F
1.2.176 18 Jul 2012 Fix adding new station when there is no station B
1.2.176 18 Jul 2012 Fix adding new port B
1.2.175 17 Jul 2012 Addition: Ability to take monitors from different site F
1.2.174 11 Jul 2012 Addition: Ability for auto answer in modem F
1.2.173 10 Jul 2012 Addition: Ability to avoid send remote error messages F
1.2.172 9 Jul 2012 Change the security of Envidas Ultimate files F
1.2.172 9 Jul 2012 Change the alert schedule from don't send between to
ability to send between
F
1.2.172 4 Jul 2012 Remove the selection between primary and secondary
DB
F
1.2.171 3 Jul 2012 Save raw values in RAW_ tables F
1.2.170 27 Jun 2012 Added New Protocol Called "CasellaCel-63xPoll" Under
"Casella_Cel" Protocols
F
1.2.169 26 Jun 2012 Change Button Name "Save" In Options To "OK" F
1.2.169 26 Jun 2012 Enable To Control Column Size In Alerts Panel F
1.2.169 26 Jun 2012 Display "---" Inserted Of "-9999" In Grid F

1.2.169 25 Jun 2012 Fix For Change Calib Channel Offset When Change
Calibration Offset
B
1.2.169 20 Jun 2012 Fix For Add New Alert, Remove Once A Day Option B
1.2.168 19 Jun 2012 Added New Protocol Called "MWS Basic" Under
"Reinhardt" Protocols
F
1.2.168 18 Jun 2012 Fix For Add Digital Output B
1.2.168 17 Jun 2012 Added New Protocol Called "Sentry" Under "Cerex"
Protocols
F
1.2.167 11 Jun 2012 Fix For Switch Between Schedule Alert Days Saving B
1.2.167 7 Jun 2012 Added New Protocol Called "2537B With Speciation"
Under "Terkran" Protocols
F
1.2.167 7 Jun 2012 Added New Protocol Called "2537B" Under "Terkran"
Protocols
F
1.2.167 7 Jun 2012 Added New Protocol Called "Tekran Speciation
Diagnostics" Under "Terkran" Protocols
F
1.2.167 6 Jun 2012 Ability To Hide Digital Output Icon In Calibration
Sequence
F
1.2.166 3 Jun 2012 Fix For Switch Between Schedule Alert Days Saving B
1.2.166 31 May 2012 Prevent Saturation When Poll Service Start Before
Hasp Service
F
1.2.165 29 May 2012 Added New Protocol Called "O3_Model202" Under
"TwoBTech" Protocols
F
1.2.165 29 May 2012 Fix For Configuration SMS In Turkish Language B
1.2.165 29 May 2012 Fix For Change Language B
1.2.164 22 May 2012 Add Option To Set Schedule Alert F
1.2.164 17 May 2012 Fix For Change Analyzer Site B
1.2.164 17 May 2012 Climatronics AIO Met Sensor Fix Command To Send F
1.2.163 10 May 2012 Add New Monitors: 'Declination' And 'Antenna height' F
1.2.163 9 May 2012 Fix For 5080 Over TCP and RS232 Counter B
1.2.163 9 May 2012 Climatronics AIO Met Sensor Fix Command To Send F
1.2.162 7 May 2012 Fix: Flush Receive Buffer For GPS Protocol B
1.2.162 7 May 2012 Improve Casella Collection F
1.2.162 6 May 2012 Fix For WindSonic Protocol, Don't Ignore Empty Answer B
1.2.162 6 May 2012 Add Time Poll Answer For Viewer. F
1.2.161 3 May 2012 Fix For Return Digital Monitor Status For PLC Protocol B
1.2.161 3 May 2012 Fix Load Configuration Form XML B
1.2.160 2 May 2012 Reset The Default Command For API700 series and for
the 703 series
F
1.2.160 2 May 2012 Set Default Sample Rate To 5 Sec F
1.2.160 2 May 2012 Set Default Pool Timeout To 500 ms F
1.2.160 1 May 2012 Fix For Re-Open TCP Port Calibrators Every Cycle B
1.2.159 29 Apr 2012 Fix For Modbus Slave Comm Using B
1.2.158 24 Apr 2012 New Calc Type EPA YamartinoSTD 1 Hour From 15
Min.
F
1.2.158 22 Apr 2012 Added New Check Status For API V MODE F
1.2.157 18 Apr 2012 Fix For Modbus Slave Digital Output B

1.2.156 17 Apr 2012 Fix For Modbus Slave Digital Input B
1.2.156 17 Apr 2012 Added New Protocol Called "Partisol2000i" Under
"TEOM" Protocols.
F
1.2.155 4 Apr 2012 Emant Emant-300 Fix Counter. B
1.2.154 1 Apr 2012 Fix Channel Digital Status Save And Names Display B
1.2.153 29 Mar 2012 Added New Protocol Called "UIM" Under "Climatronics"
Protocols
F
1.2.153 29 Mar 2012 Ability To Skip Status Update F
1.2.153 29 Mar 2012 Ecotech Serinus-51 Protocol Improved F
1.2.153 29 Mar 2012 Emant-300 Protocol Improved F
1.2.153 29 Mar 2012 New 4 Status Was Added To The System: OK_CALIB,
OK_

1.2.145 21 Feb 2012 Fixed The Problem From Version 144 Sometimes EUL
Not Saving Data In Database (Thread Sync Problem),
B
1.2.145 21 Feb 2012 Fixed The Problem EUL Viewer Sometimes Crashed. B
1.2.144 20 Feb 2012 GasMet2 Protocol Increased To 50 Channels And Now
This Protocol Skip Status Value.
F
1.2.144 20 Feb 2012 Bam-1020 Protocol Digital Monitor Status Analyze
Fixed.
B
1.2.144 20 Feb 2012 Fixed The Problem When There Are a lot Of Channels
In Station, Sometimes 1 Minute Time Base lost One
Record.
F
1.2.143 16 Feb 2012 Alert Message Increased From 100 characters To 300. F
1.2.143 16 Feb 2012 Fixed The Problem When "Receive All Alerts" Check
Box Save "Null" Instead "True" Value
B
1.2.142 15 Feb 2012 Added New Protocol Called "TEI-5030i" Under "TEI"
Protocols.
F
1.2.141 14 Feb 2012 Added New "GasMet" Protocols Called "GasMet-2"
(Reading 16 Channels From A File.).
F
1.2.140 14 Feb 2012 EUL Dasibi Server Now Showing The Real Date &
Time.
B
1.2.139 13 Feb 2012 Added New Protocol To TEI List Called TEI17I F
1.2.138 7 Feb 2012 Fixed

1.2.128 1 Jan 2012
Basic\Detailed View.
Added An Option To Modbus (TCP\IP Only), To Close
Communication Just When There Are No Answers #
Times From Device.
F
1.2.128 1 Jan 2012 Added New Protocol For Ecotech Serinus-51. F
1.2.127 28 Dec 2011 Calibration Correction Separated To Zero & Span
Correction. Run "DatabaseCreator" Program.
F
1.2.127 28 Dec 2011 Fixed The Problem When Sending Digital I/O Inside
Remote Protocols "RemoteBin" And "RemoteBinPLC"
(In Two Sites And Above).
B
1.2.127 26 Dec 2011 Improved The Data Missing In Transition Between
Some Calib Status To "Purge" Status.
F
1.2.126B 18 Dec 2011 Added Log To TimeBase Avg Calls. F
1.2.126B 18 Dec 2011 Improved API700 Analyzer Calib Status. F
1.2.126B 18 Dec 2011 Improved Formula Channel Legal Words List. F
1.2.126B 18 Dec 2011 Improved AQM60 Protocol- Now Can Analyze Negative
Values.
F
1.2.126 8 Dec 2011 Added To AQM60 Protocol All AQM Sensors Types. F
1.2.126 8 Dec 2011 Improved Import\Export Configuration To XML File.
Note: The Ultimate version doing the Import must
match the version that did the Export
F
1.2.125B 1 Dec 2011 Improving Teledyne_API 633 & 651 Protocols. F
1.2.125B 1 Dec 2011 Fixed Problem When Some Cases Mean AVG Included
in calculating The Value -9999.
B
1.2.125B 1 Dec 2011 Fixed Command Terminal When Was Problem With
Send Short Commands.
B
1.2.125B 1 Dec 2011 Added Option To Show/Hide The Tool Tips In The
Dynamic Tabular Display.
F
1.2.125B 1 Dec 2011 Now In MonitorLab Protocols When Analyzer Send
Status This Status Is Force For The Current Channels.
F
1.2.125B 1 Dec 2011 Added Few New Statuses To The System- Those
Status Means To Say To User There Are Few Bad
Statuses But Data Is OK.
F
1.2.125B 1 Dec 2011 Fixed Young 8100 Protocol Problem. B
1.2.125 6 Dec 2011 Added New Protocol Called "Gill WindSonic" Under
"Gill" Protocols.
F
1.2.124 21 Nov 2011 Added "Save As" Option In New "Dynamic View" Form
(For Clone The Dynamic).
F
1.2.124 21 Nov 2011 Added "Save As" Option In "New Instant. Chart" Form
(For Clone The Chart)
F
1.2.123 17 Nov 2011 EUL now supporting TCP/IP Modem/Router SMS
Device
F
1.2.122 15 Nov 2011 Added Zero & Span reference to sequence chart form F
1.2.122 15 Nov 2011 Added Span2 for HORIBA APNA-360 calibration F
command
1.2.122 15 Nov 2011 Added New protocol for Radiance M903 Analyzer F
1.2.121 9 Nov 2011 Added New Protocol For Rosemount NGA 2000 F

1.2.121 9 Nov 2011
Analyzer
Changed The "Reference" Value On "Calib Display"
Form To Show Value As Channel Format
F
1.2.121 9 Nov 2011 Added New Two Protocols For Teledyne 633 And 651
Models.
F
1.2.120 3 Nov 2011 Added new two average types to the system "Mitsuta
Scalar" and "Unit Vector Direction" .", "Noting Standard
Deviation" And "Yamartino Standard Deviation"
F
1.2.119 1 Nov 2011 TSI-3031 checksum changed to working with two digits
instead of one
F
1.2.118 31 Oct 2011 Fixed the lost GPRS Communication B
1.2.117 24 Oct 2011 Added Udp option support for TCP/IP connection F
1.2.116 23 Oct 2011 Added few options to B&K protocol F
1.2.116 23 Oct 2011 Fixed problem with service closing B
1.2.115 10 Oct 2011 Fixed calc calib crashing when zero or span are null B
1.2.115 10 Oct 2011 Added option to limit the logs file life & size and improve
the logs name
F
1.2.115 10 Oct 2011 Added new configuration log for the new log system
(under "Operational" menu)
F
1.2.114 13 Sep 2011 Added new protocol called "Portable Dust Series"
Under Grimm Analyzers
F
1.2.113 12 Sep 2011 Added New Average Mechanism Working With
Seconds Time base Called "Extended Time base"
Supporting 5, 10, 15 And 30 Seconds. Note: Run
"DatabaseCreator" Program.
F
1.1.112 5 Sep 2011 Check if Log File Name contains invalid characters F
1.1.112 5 Sep 2011 Now EUL support decimal point threshold e.g (66.666) F
1.1.111 24 Aug 2011 Added New protocol called: TSI-3031 under "TSI"
analyzers
F
1.1.111 24 Aug 2011 Diagnostic digital monitor status and spare parts added
to analyzer change option
F
1.1.110 22 Aug 2011 Added Scrip to change the old BAM dll name from
"MAB" to "MetOne". Note: Run "Database Creator"
F
1.1.110 22 Aug 2011 Now user can change the analyzer type F
1.1.109 17 Aug 2011 Added New Protocol Called Horiba PG-250. F
1.1.109 17 Aug 2011 Added New Protocol Called Horiba APXX-370
F
1.1.108 16 Aug 2011
Supported All APXX Series (APNA, APHA, APMA,
APSA).
In Windows Vista And Windows-7 Service Can't Play
Multimedia, So In Those Operating Systems
SoundAlarm Playing By "Viewer".
F
1.1.108 14 Aug 2011 Now Force Status Can Be Limited By Time. F
1.1.107 9 Aug 2011 Terminal Command Form, Now Fixed The Automatic Id
Added To Command User Send To Analyzer.
B
1.1.107 7 Aug 2011 Two New Protocols Added To The System:
Nephelometer NGN-2A & NGN-3A Under "Optec"
Analyzer.
F

1.1.106 4 Aug 2011 Fixed Envidaq 8053 & 8017 While Stopping Receive
Data In TCP/IP Mode.
B
1.1.106 4 Aug 2011 Fixed Ecotech-TP9400 When Stop Working While
Channel Name Is Changed
B
1.1.105 1 Aug 2011 Another Two Values Added To Garmin GPS18xPC
Protocol: Speed And Direction
F
1.1.105 1 Aug 2011 "Audit" Status Add As EUL Status.Note: You need to
Run "CreateDataBaseSetup", DbBuilder (v1.1.0.10
(0.0.0.31)) Applications
F
1.1.105 1 Aug 2011 Now User Can Add His Own Status To StatusList Table
(Id Number 101 And Above)
F
1.1.104 27 Jul 2011 Dasibi Protocol Format Changed For Value -999 F
1.1.104 27 Jul 2011 EULSetup HASP Checking Streaming Changed F
1.1.104 27 Jul 2011 Fixed Showing Value When Mouse Cursor Point To
The Graph
B
1.1.104 27 Jul 2011 Dynamic Charts Thickness Option Fixed B
1.1.104 27 Jul 2011 Added To HORIBA APNA-360CE SAMPLE Command
At The Beginning And Calibration Commands
F
1.1.104 27 Jul 2011 Added Few Another Few API's Diagnostics &
DigitalMonitorStatus
F
1.1.103B 21 Jul 2011 Dynalab WD-1002 Now Can Handle Wrong Answer
Came From Analyzer
F
1.1.103B 21 Jul 2011 API Diagnostics Parsing Value Now Ignoring
Diagnostics Name (Because Not Always The
Diagnostic Command Equal To The Diagnostic Answer)
F
1.1.103B 19 Jul 2011 Dasibi Remote Protocol- Status RS232 Now Return -
999 Instead -9999
F
1.1.102B 19 Jul 2011 Fixed "RemoteBinPLC" Protocol Bug With The 3 New
Columns
B
1.1.102B 19 Jul 2011 Added For All TEI "T" Series Protocols
DigitalMonitorStatus & Diagnostics Taken From "E"
Series
F
1.1.102B 19 Jul 2011 All API Protocols Now Can Handling
DigitalMonitorStatus Cames With Capital X (For
Example: 0X0000002c instead 0x0000002c)
F
1.1.102B 19 Jul 2011 Fixed Import XML Configuration B
1.1.102B 22 Jun 2011 Added "Send Alert" Log By SMS/E-Mail F
1.1.102B 22 Jun 2011 Fixed Few Bugs In Sending SMS B
1.1.102B 22 Jun 2011 Fixed StatusNot Alert Bug B
1.1.101B 22 Jun 2011 Added New Feature: Daily Scheduled SMS F
1.1.100B 22 Jun 2011 Added New Feature: SMS Modem Check F
1.0.99B 20 Jun 2011 Added For Multi Calib The Operation Type & Operator
Name. Note: Need Upgrade CommCenter To 1.7.37 Or
Above And Also Update Database In Center By
"DBBuilder" Program
F
1.0.98 12 Jun 2011 Dynalab "WDL-1002" Weather Monitoring Added To
System.
F

1.0.98 6 Jun 2011 RemoteBin & RemoteBin PLC Protocols New Working
With "Spare Parts" Options (EUL Sending SpareParts
Column Out To CommCenter). Note: Need Upgrade
CommCenter To 1.7.37 Or Above And Also Update
Database In Center By "DBBuilder" Program
F
1.0.98 6 Jun 2011 Added "Spare Parts" GUI In Setup & Column To
TB_LOGBOOK Table. Note: Must Update
TB_LOGBOOK In Station And Center.
F
1.0.97 2 Jun 2011 New Protocol" Cassela CEL-630 Noise meter
instrument
F
1.0.96 30 May 2011 Added more Teledyne API analyzers types and set
default commands for all API's
F
1.0.96 29 May 2011 Climatronics AIO Met sensor protocol added to the
system
F
1.0.95 25 May 2011 TEI-49i\c Default command change F
1.0.94 25 May 2011 Added log to calibration calculation. Minor bugs fixed on
factor calculation
F
1.0.93 25 May 2011 When a user makes any change in the channel the
details recorded in the logbook table.
F
1.0.93 25 May 2011 When a user login to the system the details recorded in
the logbook table.
F
1.0.92 24 May 2011 There are few additions and fixed in Envidas Viewer F
1.0.91 19 May 2011 Added to M9003 Nephelometer analyzer reset
command send ones at startup
F
1.0.91 19 May 2011 Added to all MonitorLab analyzers reset command send
ones at startup
F
1.0.91 15 May 2011 Added to all calibrators reset command GUI (user need
to configure in "Device" tab)
F
1.0.91 15 May 2011 Added to all TEI analyzers reset command (takes from
user configuration and send to analyzer ones at the
beginning)
F
1.0.90 12 May 2011 Campbell scientific PackBus-CR1000 protocol fixed B
1.0.89 14 Apr 2011 Larson Davis LD-870 sound meter – numeric number
parse removed
F
1.0.88 14 Apr 2011 Remote bin diagnostics now send the calibration
description instead the command
F
1.0.87 7 Apr 2011 TEI Protocols now support multi lines answer instead 2
lines only
F
1.0.87 7 Apr 2011 Below counter alert fixed B
1.0.86 5 Apr 2011 "Larson Davis" LD-870 sound meter protocol now
supported checksum with the command send to
analyzer
F
1.0.86 5 Apr 2011 M9003 Nephelometer protocols diagnostics fixed B
1.0.86 5 Apr 2011 TEI analyzer now supporting checksum coming with the
answer
F
1.0.86 5 Apr 2011 Monitor Lab protocols diagnostics fixed B
1.0.86 5 Apr 2011 New terminal added to "Envidas Ultimate Viewer" under F

1.0.85 31 Mar 2011
"Tools" without regardless of ports used by Envidas
Ultimate
Protocol AQM60 moved from "Vaisala" protocols under
"Aeroqual" protocols (Note: need to configure this
protocol again)
F
1.0.84 30 Mar 2011 Initialize command added to monitor/lab Ecotech
protocol
F
1.0.84 30 Mar 2011 Initialize command added to M9003 Nep. protocol F
1.0.84 29 Mar 2011 Vaisala WXT425 protocols channels name changed to
wind type sensors
F
1.0.83 23 Mar 2011 Teom1400 protocol diagnostics start with wrong values
fixed
B
1.0.83 23 Mar 2011 M9003 Nep. Protocol diagnostics values fixed B
1.0.82 23 Mar 2011 Vaisala AQM 60 channels list fixed B
1.0.81 23 Mar 2011 Now all SMS alerts can be sent in any language F
1.0.81 23 Mar 2011 Added two new alert list called "Above Counter" and
"Below Counter"
F
1.0.80.1 17 Mar 2011 Added "Export HAP license" option to the "File " menu F
1.0.80 15 Mar 2011 Several New API's protocols added to the system F
1.0.80 15 Mar 2011 Garmin GPS 18x PC protocol converted to work as
pushing protocol type
F
1.0.79 13 Mar 2011 Fixed - Extra channels (wind speed & wind direction)
configuration not deleted with all channel data
B
1.0.78 10 Mar 2011 Larson Davis LD-870 sound meter analyzer added
under "Larson Davis" protocols
F
1.0.78 10 Mar 2011 ESC Problem with negative fixed also in values data B
1.0.77 9 Mar 2011 Fixed - Protocols diagnostics switching between
"DiagnosticsName" & "DiagnosticsUmits" columns
B
1.0.77 9 Mar 2011 Change - API-101T separate data & diagnostics
command
F
1.0.76 7 Mar 2011 API-101T analyzer added under "API" protocols F
1.0.75 3 Mar 2011 Garmin GPS 18x PC protocol added under "Garmin"
protocols
F
1.0.75 3 Mar 2011 ESC Problem with negative values fixed in calibration
data
B
1.0.74 2 Mar 2011 MetOne Bam 1200-C protocol with option to choose
command to send to analyzer added under "MetOne"
protocols
F
1.0.73 1 Mar 2011 Multi water quality checker U-50 series protocol added
under "Horiba" protocols
F
1.0.72 1 Mar 2011 Calibrator 6100 protocol added under "Environics"
protocols (for diagnostics values)
F
1.0.72 1 Mar 2011 Change: ESC remote protocol now send calibration
name in upper case only
F
1.0.72 1 Mar 2011 Diagnostics added to Verewa F-701 protocol F
1.0.71 27 Feb 2011 Fixed problem with the calibration saving into database B
1.0.71 27 Feb 2011 Change: ESC calibration response changed and also F

1.0.70 17 Feb 2011
the query from database (Run "Database Creator"
ESC remote protocol – solved the problem when socket
communication closed in the middle of transfer data
B
1.0.69 15 Feb 2011 EnviDAQ 8017 & 8050 flush buffer removed from
protocols because this command makes to clean the
buffer from data when calibration send digital in/out
command
F
1.0.69 15 Feb 2011 ESC Remote protocol changed: now working time
beginning
F
1.0.68 11 Feb 2011 ESC Remote protocol changed: send address key
instead the channel number
F
1.0.68 11 Feb 2011 ESC Remote protocol changed – now EUL check the
address analyzer and ignore if the address command
not match to the EUL address
F
1.0.67 8 Feb 2011 New Protocol: Varewa F-701 protocol added under
"VAREWA" protocols
F
1.0.67 8 Feb 2011 RemoteBin PLC protocol now send all monitors values
to CommCenter (Install CommCenter V1.7.35)
F
1.0.66 3 Feb 2011 New protocol: EnviDAQ 8317 added under
"EnviDAQ8000TCP" protocol
F
1.0.65 1 Feb 2011 Added new option in all API protocols. F
1.0.64 27 Jan 2011 New protocol: AQM60 protocol added under "Vaisala"
protocols
F
1.0.64 27 Jan 2011 New protocol: Calibration data-time changed from "Start
Time" to "End Time"
F
1.0.64 27 Jan 2011 Remote protocol changed: Poll calibration via
"RemoteBin" protocol missed channel address number
"0"
F
1.0.63 23 Jan 2011 Added user interface configuration to
"CampbellScientific\PackBus" protocol
F
1.0.62 20 Jan 2011 ESC Remote protocol : Now user can choose monitor
number source (Channel Number/ Address number)
F
1.0.62 19 Jan 2011 Solved the problem in remote protocol
"UltimateBinPLC: that missed calibration data
B
1.0.62 19 Jan 2011 Solved the problem in remote protocol
"UltimateBinPLC: that missed calibration date
B
1.0.61 16 Jan 2011 When no data of CommFail status – "Linear Correction"
will not execute
F
1.0.61 16 Jan 2011 All TEI protocols types now return value "-9999" and
status "Comm Fail" when the communication falls
F
1.0.60 10 Jan 2011 Export/ Import configuration to/from XML file added (in
the "Add Site" form
F
1.0.60 10 Jan 2011 Addition in MetOne BAM-1020 protocol F
1.0.60 10 Jan 2011 Added digital monitor status default value to all
F
APIXXXX protocols
1.0.60 4 Jan 2011 Protocols list feature added to "Ultimate Setup" program F
1.0.60 4 Jan 2011 Version Manager Added to Ultimate Setup (Program & F

1.0.60 4 Jan 2011
Protocols)
Fixed – Average Type Rain Fall Counter, reset counter B
1.0.59 1 Jan 2011 Fixed – TEI 55i Calibration "Temp Base" value answer B
1.0.59 10 Nov 2010 Added new protocol called Vaisala WS425 Handar
protocol
F
1.0.59 27 Oct 2010 Added new protocol called CasellaCEL working with
CEL490 analyzer
F
1.0.59 27 Oct 2010 Added Watchdog option to "EnvidasService", If there is
no response from the service while 60 seconds PC will
reboot
F
1.0.58 20 Oct 2010 Fixed little bug In "ServiceManager" that caused adding
"+" sign inside "AutoStartViewerDelay" text box
B
1.0.57 19 Oct 2010 Protocol GasMet added new feature that check the
span time between data file and system machine
F
1.0.57 19 Oct 2010 Protocol Synspec DigitalMonitorStatus reversed F
1.0.56 17 Oct 2010 Remote Protocol ESC fixed B
1.0.55 17 Oct 2010 Protocol Synspec DigitalMonitorStatus fixed B
1.0.54 5 Jul 2010 when there is calibration in part of the average it will
set the average flag as "calib" even it is not Threshold
value [%] of the average
B
1.0.54 5 Jul 2010 Fix: when selecting weekly schedule it will not work B
1.0.54 5 Jul 2010 Arbor protocol change the way the analog input is
calculated now it will convert the value to volt in the
ultimate
F
1.0.53 28 Jun 2010 Added "UltimatePLC" communication protocol between
the CommCenter and the Envidas Ultimate. It arranges
the PLC Address to each channel instead the former
channels' order.
F
1.0.52 27 Jun 2010 Added ARBOR Arpex 1610 'analyzer' protocol (via Port
5 only!)
F
1.0.51 21 Jun 2010 Viewer: Added calibration chart F
1.0.50 27 May 2010 Setup: Added explanations to functions F
1.0.50 27 May 2010 Setup: Added YOUNG & VM100 protocols F
1.0.50 27 May 2010 Setup: Added limits on the measuring times in the
SEQUENCE configuration field, so maximum time
allowed is phase time minus (start measuring time
minus time of ending last phase)
F
1.0.50 27 May 2010 Viewer: Changed function of VIEWPOS column in the
CANNEL table. Now it represents the monitor's address
and not monitor's order.
F
1.0.49 26 May 2010 Fix: Analyzer status can be changed from Offscan to
System drawing
B
1.0.48 23 May 2010 Added button "Ch. Location Update" that enables the
channel's dragging function. When this button is on – a
message will appear that the location change must
occur only in the center
F
1.0.48 23 May 2010 Fix: Problem in the formula (global & channel) while B

1.0.48 23 May 2010
inserting infinity loop
Changed: In case of PURGE & SAMPLE statuses the
time setup will be disabled. An empty row will appear on
the configuration screen.
F
1.0.48 23 May 2010 Changed: The station's time-base selection is now
available from combo box only and not by user typing
F
1.0.48 23 May 2010 Changed: In channel formula the default for writing a
formula is with "return" text at the beginning
F
1.0.48 23 May 2010 Changed: In channel formula added help for beginner
users
F
1.0.47 21 May 2010 Add: Alarm in case of Status not OK F
1.0.47 21 May 2010 Add: in I/O Validation adding more Statuses like SPAN,
ZERO, CALIB and OFF SCAN + Invalid
F
1.0.47 21 May 2010 Fix: In Alarms not display DO Options in the Combo List B
1.0.47 21 May 2010 Fix: Adding DI with DO Operation, The DO Combo not
display the DO List
B
1.0.46 25 Feb 2010 Setup: Added modbus server to the "TCP/IP" field F
1.0.45 23 Feb 2010 Setup: The user can save instant data to files per Site.
the user can set the interval for each site
F
1.0.45 23 Feb 2010 Setup: The user can call application from the diagram F
view , first need to set each app path in the setup
1.0.45 23 Feb 2010 Now in the hyper terminal you need to select the
analyzer from the list of analyzer that are connect to the
port you opened
1.0.44 22 Oct 2009 Viewer (Version 1.0.17)Added Dynamic Diagram
Viewer
1.0.44 22 Oct 2009 Added option to install updates and not only full
installation
1.0.32 1 Sep 2009 Fix: ultimate set hardcoded 0.5 minimum speed instead
of taken the 0.3 that set by the user
1.0.32 1 Sep 2009 Fix: Problem with Nan (not a number) that appears
when average WS and WDD is zero. Now instead of
NaN it will set you 0 and status invalid
1.0.32 31 Aug 2009 Added protection in the code to fix the response time of
analyzers
1.0.32 17 Aug 2009 Fix problem in calibration sequence that considered CO
under 1% as invalid
1.0.32 13 Aug 2009 Fix calibration problem: The calibration results on
operation calibration report (report viewer) showing
invalid
1.0.32 13 Aug 2009 Add absolute (ABS) to the formula (the absolute is
taken related to the whole formula):
ABS({[(SpanVal – SpanRef) – (ZeroMeasured –
ZeroReference)]/D} x 100)
F
1.0.32 12 Aug 2009 Viewer: In case analyzers are off, all monitor s will be
shown 'Off' in the viewer. The 'Off' will not change the
channel itself in the setup.
F
1.0.32 12 Aug 2009 Viewer: Add option to hide the Off monitor in adding F
F
F
F
B
B
B
B
B

1.0.31 12 Aug 2009
analyzer window
Setup: Fix calibration validation problem B
1.0.30 11 Aug 2009 Setup: Add to Calibration window (when configuring
channel) these items to "Validation" combo box:
SPAN FACTOR(% of range) & SPAN FACTOR(% of
Ref)
F
1.0.30 3 Aug 2009 Setup: Add options to "Formula" window in the
"Channel" configuration tab screen
F
1.0.30 3 Aug 2009 Setup: Fix M9003 status is now included in the protocol B
1.0.29 28 July 2009 Setup: Add Sound record & Video Record items to the
tree-menu
F
1.0.29 28 July 2009 Setup: Add STATION ID configuration item
1.0.29 28 July 2009 Setup: Add voice alarms F
1.0.29 28 July 2009 Setup: Add LANGUAGE button to the toolbar F
1.0.29 28 July 2009 Setup: Add API INDEX configuration item F
1.0.29 28 July 2009 Setup: Add "Redundant" configuration item F
1.0.29 28 July 2009 Setup: Add option to change monitor status to CALIB
FAIL in case of failure in calibration
F
1.0.29 28 July 2009 Setup: Now you can act digital output in case of failure
in the calibration
F
1.0.29 28 July 2009 Setup: Add option to alert in case the calibration failed F
1.0.29 28 July 2009 Setup: Add option to make calibration validation F
1.0.29 28 July 2009 Setup: Add option to check the calculated- channel's
status by the parameter "OverrideStatus"
F
1.0.29 28 July 2009 Setup: Add: Calculating calibration by X time from the
end.
F
1.0.28 27 July 2009 Setup: Add: Option to shut down sequence by Digital
Input
F
1.0.28 27 July 2009 Setup: Fix: In case there are 2 alarms that change the
Digital Output and one goes up while the second goes
down the Digital output was shut down although there
was an open alert.
B
1.0.27 15 Jul 2009 Setup: Fix problem with second exception in the FTP B
1.0.27 15 Jul 2009 Setup: Fix protocol FH62/sharp 5030 B
1.0.27 28 Jun 2009 Setup: Add 9400TP device to EUL F
1.0.27 23 Jun 2009 Setup: Add calibration command to ML98xx analyzers F
1.0.27 16 Jun 2009 Add New application (separate installation) called
"Envidas Ultimate Viewer" that identical to the 'regular'
Envidas Ultimate Viewer except one difference: This
utility lets to use the Envidas Ultimate by remote
control.
F
1.0.27 15 Jun 2009 Added "Vaisala WS425" wind sensor F
1.0.27 27 May 2009 Setup: Fixed problem that the user cannot move
channel under OS Vista
B
1.0.26 2 Apr 2009 Setup - Fix error when adding analyzer B
1.0.23 23 Mar 2009 Camera View - Add this application (with separate
desktop icon) to view all cameras in the system
F

1.0.22 17 Mar 2009 Service: Fixed - average data is not saved
1.0.21 10 Mar 2009 Service: Fix alerts state [In/ out] B
1.0.19 23 Feb 2009 Setup - Added protocol name (type) in the info of the
analyzer
F
1.0.18 8 Feb 2009 Service: Fixed digital monitor status validation bug (the
digital monitor status did not invalid data when set to
valid on Off. also when the active check box was not
check the data was still invalid)
B
1.0.20 22 Feb 2009 Setup: Fix - when you adding alarms and then you
chose anther tab in the channel and then return to
alarm tab.
the display on the interval field is erased
B
1.0.19 19 Feb 2009 Setup: Fix - TEI flags don't change the status B
1.0.19 19 Feb 2009 Setup: Fix - Thermo doesn't poll diagnostics B
1.0.11 19 Feb 2009 Viewer: Fix - Chart Is Crashing B
1.0.20 17 Feb 2009 Service: Fix - TEI not send calibration command B
1.0.20 16 Feb 2009 Service: Fix - Monitor Diagnostics Data is not display
correctly. There was a problem with the query in the
remote protocol.
B
1.0.11 11 Feb 2009 Viewer: Fix - alarm description is not as set in the setup B
1.0.10 11 Feb 2009 Viewer: Fix - delete the unnecessary chart type in the
config chart :histogram, gantt ,hilo ,hiloopenclose, radar
B
1.0.18 9 Feb 2009 Setup: Fix - there was a 1 bit shift in the digital monitor
status validation check
so if the user set validation on bit 17 it was actually
check bit 18
B
1.0.18 9 Feb 2009 Setup: fix default values for TEI 48I and 48C B
1.0.17 4 Feb 2009 Service: Fix - The rainfall count AVG don't sum the
sample
B
1.0.11 4 Feb 2009 Viewer: Fix - when closing viewer some time we get
exception
B
1.0.16 1 Feb 2009 Service: Fix - when you define a stability channel, it
show all the time in the status

1.0.15 12 Jan 2009
to initiate session , it's show wrong message
Service: Fix - the logs are being save all Though we set
them to off in the setup
B
1.0.15 12 Jan 2009 Service: Fix - Don't send SMS, Email and Digital IO
alerts
B
1.0.14 11 Jan 2009 Service: Fix -the first sound alerts doesn't work B
1.0.8 11 Jan 2009 Viewer: Fix - the back color of the chat is not been
saved
B
1.0.14 8 Jan 2009 Service: Fix - polling log book from Envidas Ultimate B
1.0.14 8 Jan 2009 Service: Fix - when digital input is turning on an empty
sequence it's stop the service
B
1.0.13 6 Jan 2009 Setup: Fix -delete the last user B
1.0.4 26 Oct 2008 Calibration will take all values except no data and
RS232
B
1.0.4 26 Oct 2008 Now support 2 running averages F
1.0.3 19 Oct 2008 Change the instant chart completely F
1.0.3 16 Oct 2008 Changes related to "CAI" instrument:
F
Add 5 channels for reading.
Change default diagnostic values.
Change the diagnostics: now the user can use
the ATEM K0 with 1,2,3… like so ATEM K0 1,
this will enter the first value to the diagnostic also
ADRU are support an any other command in fact
that will use 3 word the last word should be the
place of the value that need to be taken.
1.0.3 16 Oct 2008 Digital monitor status changes & fix items:
F
Change title from Last Receive To Last Scan. B
Change the green light to Red
Change the red light to Gray
Add state [on] or [off].
In "channel validation" column show channel that
are active and set to invalid
Fix bit are not showing correct on the view
1.0.2 12 Oct 2008 Added running average F
1.0.2 12 Oct 2008 Added HFID protocol to CAI analyzers F
1.0.1 6 Oct 2008 Changed – New splash screen of the Viewer F
1.0.1 6 Oct 2008 "Alerts List" changed to "Active Alerts List" in the Viewer F
1.0.1 5 Oct 2008 Change color of digital out/in bits: Active= Red,
Inactive= gray
F
1.0.1 5 Oct 2008 Viewer: Add to the status bar the username and version
number
F
1.0.1 5 Oct 2008 Add "Dynamic View"(called GUI before) icon to the
Viewer's toolbar
F
1.0.1 5 Oct 2008 Add Username & Password request ("Login") when
open Envidas Ultimate Viewer. Only administrator can
add/change "Dynamic View" (called GUI before)
F
1.0.1 5 Oct 2008 Changed – New splash screen of the Viewer F

1.0.1 5 Oct 2008 Fix: in the Viewer, "Dynamic View"(called GUI before)
(view)" screen saved place and dimensions
B
1.0.1 5 Oct 2008 In the Viewer: Changed name of "Dynamic GUI" (map
in the past) to "Dynamic View"
F
1.0.1 5 Oct 2008 Fix: in the Viewer, digital output now changed fin the
dynamic screen
B
1.0.1 5 Oct 2008 Fix: Import & Export Buttons in "Diagnostics" and Digital
Monitor Status" of analyzers now fill their purpose
B
1.0.1 5 Oct 2008 "Envidas Ultimate View" changed its name to Envidas
Ultimate Viewer
F
1.0.1 5 Oct 2008 Add Username & Password request ("Login") when
open, close and change states in the Envidas Ultimate
Service. Only supervisor can change states!
F
1.0.1 2 Oct 2008 Update Manual
1.0.1 14 Sep 2008 Cancel "SAMPLE" status F
1.0.1 14 Sep 2008 Add Protocol to DDK F
1.0.1 14 Sep 2008 Change statuses to the Envista ARM's statuses F
1.0.0 31 Aug 2008 Change status number for Power Fail from 33 to 16. F
1.0.0 31 Aug 2008 Fix the status bar label for number of site and channel
number per site.
B
1.0.0 31 Aug 2008 Fix When Selecting Analyzer view and there is output
protocol the setup show error message
B
1.0.0 31 Aug 2008 Change TEI And EnvironnementSA when sending calib
command now it will send the command one time and
not every request.
F
1.0.0 31 Aug 2008 New feature:
F
Added Dynamic View (create, view and edit). For
Envidas ultimate View Application.
Added CAI Analyzer Protocol
Added OPC Server
Added Bruel_And_Kjaer Noise Analyzer
Protocol.
1.0.0 31 Aug 2008 Update Manual F
1.0.0 31 Jul 2008 Added Brule Kjaer type 2250 protocol (it can be added
only to the Other treeNode)
F
1.0.0 28 Jul 2008 Ultimate setup added Learning mode F
1.0.0 28 Jul 2008 Ultimate View now add diagnostic and digital monitor
status
F
1.0.0 24 Jul 2008 Added the "Teom1405" protocol to "Teom" analyzer as
Teom1405 and add digital monitor status list to this
analyzer
F
1.0.0 17 Jul 2008 No need to un-install the program. Each update will
cause automatic installation to the former version
B
1.0.0 17 Jul 2008 Add thermo bam protocol F
1.0.0 17 Jul 2008 Fix the thermo diagnostics and digital monitor status B
1.0.0 17 Jul 2008 Add help topics as smart tooltip F
1.0.0 17 Jul 2008 Add - Press F1 in the tree and the relevant page from F

1.0.0 10 Jul 2008
the help document will appear
Add Global function to Configuration menu F
1.0.0 6 Jul 2008 Calculated formula: supports digital input/output in the
formula
F
1.0.0 6 Jul 2008 Calculated formula change: parameters that coming
from different sites will be named after the site name
(after the monitor name) like this: “Mon_Site name”
F
1.0.0 2 Jul 2008 Add virtual digital output (in calculate analyzer) F
1.0.0 30 Jun 2008 Add the RainFall Analog and counter to “Average” field
in channels configuration
F
1.0.0 29 Jun 2008 Change “Rate of Change” (Envidas Ultimate Setup
Channel Validation) to “Change at Percent of
Range)
F
1.0.0 29 Jun 2008 Fix bug in the rate of change (Envidas Ultimate Setup
Channel Validation)
B
1.0.0 1 Jun 2008 Add flow control comboBox to the Modem menu in the
setup
F
1.0.0 1 Jun 2008 Add Analyzer view in the tree in order to see all
analyzers sort by site
F
1.0.0 24 Apr 2008 Fix calibration not save when there is more then 1
calibration to a monitor
B
1.0.0 24 Apr 2008 Fix calibration not save when offset time was not
configure properly
B
1.0.0 24 Apr 2008 Add instant chart in the Envidas Ultimate View
That can add and configure the chart monitor time
range
F