Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>CHROME</strong><br />
FRONT END 166<br />
BRAKE COVERS 170<br />
ENGINE 174<br />
REAR END 180<br />
LICENSE PLATES 187
166<br />
FRONT END<br />
DECO EAGLE<br />
FENDER ORNAmENT<br />
True vintage styling of the 40’s & 50’s! Light weight ABS design<br />
& sim<strong>pl</strong>e peel-&-stick ap<strong>pl</strong>ication will have you back on the<br />
road in no time!<br />
Fits: Universal: Front Fenders with approximately 15-1/4"<br />
Radius Curve<br />
Honda: VTX1800C/F, VTX1300C, Fury, VT1300 Custom Line<br />
Kawasaki: Vulcan 1700 Models, Voyager & Vulcan 900 Models<br />
Yamaha: V Star 650, 950, 1300 Models & Road Star Models<br />
(Not for Roadliner, Stratoliner or Raider)<br />
7333 Deco Eagle Fender Ornament (ea)<br />
TRICEPTOR<br />
FENDER ACCENT<br />
You decide where it looks best - as a<br />
tip or top fender accent. Peel-&-stick<br />
installation quickly adds some sparkle &<br />
covers unsightly stone chips.<br />
Fits: Honda: All VTX1300/1800 & VT1300<br />
Custom Line<br />
Yamaha: All V Star 1300/1100/650, all<br />
Road Star, all Roadliner/Stratoliner, &<br />
Raider<br />
Universal: 4” or wider style fenders (does<br />
not fit fenders with flat center width)<br />
7340 Triceptor Fender<br />
Accent (ea)<br />
$ 42.99<br />
7340<br />
$ 39.99<br />
7344<br />
FRONT FENDER TIP<br />
Protection & style for your front fender. Add<br />
this chrome accent & avoid or cover those<br />
ugly stone chips. With peel-&-stick installation,<br />
embellish the contours of your front fender<br />
quickly & painlessly.<br />
Fits: Honda: All VTX1800C/F, all VTX1300C &<br />
VT1300 Custom Line<br />
Yamaha: All V Star 1300/1100/650, all<br />
Road Star, & all Roadliner/Stratoliner &<br />
Deluxe<br />
Universal: 6” or wider style fenders (does not<br />
fit fenders with flat center width)<br />
7344 Front Fender Tip (ea)<br />
FRONT<br />
FENDER SPEAR<br />
Patent Pending<br />
Add a stunning little sparkle of chrome to<br />
your fender & catch everyone’s attention! Sim<strong>pl</strong>y<br />
peel-&-stick! Measures 1-1/4" Wide x 8" Long.<br />
Fits: Universal: Front Fenders with approximately<br />
15-1/4" Radius Curve<br />
Honda: VTX1800C/F, VTX1300C, Fury, VT1300<br />
Custom Line<br />
Kawasaki: Vulcan 1700 Models, Voyager & Vulcan<br />
900 Models<br />
Yamaha: V Star 650, 950, 1300 Models & Road Star<br />
Models (Not for Roadliner, Stratoliner or Raider)<br />
7332 Front Fender Spear (ea)<br />
$ 32.99<br />
9022<br />
$ 24.99<br />
FENDER ORNAmENTS<br />
Let your front fender take on new life<br />
with one of our majestically sculpted<br />
fender ornaments.<br />
Fits: Universal ap<strong>pl</strong>ications require<br />
drilling holes in fender & hard wiring<br />
for installation<br />
9022 Wild Boar (ea)<br />
9026 Eagle (ea)<br />
3103 Re<strong>pl</strong>acement<br />
Bulb, #161 (ea)<br />
make a bold<br />
statement!<br />
9026<br />
$ 59.99<br />
$ 49.99<br />
$ 1.99<br />
W W W . K U R Y A K Y N . C O M
8684<br />
BRAKE LINE ACCENT<br />
COVERS for vtx1800<br />
Cover those bare stamped brackets holding<br />
your front brake lines to the forks with some<br />
blood grooved chrome.<br />
Fits: All '02-'08 VTX1800 Models<br />
7823 Brake Line Accent Covers (pr)<br />
STILETTO AxLE CAPS<br />
for vtx<br />
$ 39.99<br />
LOwER FORK SKINS for vtx1800<br />
Create a shining first impression! Whether parked or in motion, your front end<br />
is often the first thing peo<strong>pl</strong>e notice on your bike. Show it in it’s best light with<br />
these attention grabbing chrome Lower Fork Skins. Used alone or with our<br />
other chromed front end components, they will reflect well on you & your VTX.<br />
Fits: All ’02–’08 VTX1800 Models<br />
8684 Lower Fork Skins (pr)<br />
For those with Stiletto ISO-Grip End Caps, here’s an<br />
opportunity to make a stronger statement. Stiletto Axle Caps fit<br />
up closely to the sliders with no unsightly gaps.<br />
Fits: All VTX1300/1800 Models<br />
1207 Stiletto Axle Caps (pr)<br />
7823<br />
$ 89.99<br />
Note: Will not install with Küryakyn Lower Fork Skins.<br />
7823<br />
Caliper Cover pg 170<br />
$ 139.99<br />
SPuN BLADE<br />
SPINNING AxLE CAPS<br />
Reminiscent of the great Mustang fighter <strong>pl</strong>anes,<br />
these spinning blades give the illusion of flight. The<br />
chrome-<strong>pl</strong>ated ABS blades start to spin when the<br />
bike reaches about 25 mph. An easy, innovative way<br />
to add some additional cool factor to your bike.<br />
Fits: All VTX1300/1800 Models<br />
1239 Spun Blade Spinning Axle Caps (pr)<br />
Note: Will not install with Küryakyn Lower Fork Skins.<br />
$ 119.99<br />
8 6 6 . 2 7 7 . 9 5 9 8 167<br />
8684<br />
BIKE MAPS<br />
GOLDWING<br />
CAN-AM<br />
SPORT BIKE<br />
LIGHTING<br />
ACCESSORY<br />
MOUNTS<br />
HANDLEBAR<br />
CONTROLS<br />
FOOT<br />
CONTROLS<br />
<strong>CHROME</strong><br />
LUGGAGE<br />
TOURING<br />
AIR CLEANERS<br />
MISC<br />
INDEX
NECK COVER for v star 1100<br />
A stunning re<strong>pl</strong>acement for the dull, stock, black components<br />
found on your bike. The chrome-<strong>pl</strong>ated contours have been<br />
smoothed & molded to provide a flowing appearance. The<br />
right side cover has a stylized teardrop shaped boss that<br />
surrounds the ignition switch & leaves just its outer surface<br />
exposed. Sim<strong>pl</strong>e installation.<br />
Fits: All ’99-‘09 V Star 1100 Models<br />
7856 Neck Cover (set)<br />
CHROmE FORK<br />
PROTECTOR COVERS for raider<br />
When styling choices for your Raider reach a fork in<br />
the road, keep this in mind; chrome always looks better<br />
than <strong>pl</strong>ain black <strong>pl</strong>astic! The stock black fork protectors<br />
are difficult & time consuming to remove but they do help shield<br />
against nicks & scratches. These peel-&-stick chrome covers provide a classy<br />
custom appearance while keeping the protection the factory intended in <strong>pl</strong>ace.<br />
Fits: All ‘08-‘12 Yamaha Raider Models<br />
8699 Chrome Fork Protector Covers (pr)<br />
168<br />
$ 79.99<br />
$ 39.99<br />
REAR END CHROmE FOR YOuR RAIDER! - PG 184<br />
HEADLIGHT<br />
VISOR<br />
Long, lean, & mean! That’s the illusion your<br />
stock headlight shell will get by adding this slick<br />
Headlight Visor. Features a nicely finished rolled<br />
front edge with center bullet - a big difference that<br />
will be noticed immediately. Fastens securely to<br />
your existing headlight for easy installation!<br />
Fits: All ’99-’12 Road Star Models (except Warrior),<br />
all ’98-’10 V Star 650 Classic & '99-'09 V<br />
Star 1100 Classic Models with 7" headlamp<br />
2182 Headlight Visor (ea)<br />
4015<br />
$ 32.99<br />
SPEEDOmETER VISOR<br />
Easily affixes to the speedometer. Besides the<br />
sleek appearance, you’ll really appreciate the<br />
reduction in glare if you run a windshield!<br />
4015 Speedo/Tach Visor (ea)<br />
Fits: Honda: ‘02-’06 VTX1800C,<br />
All 250 Rebel, Shadow 1100 with<br />
Round Speedo on handlebars<br />
measuring 3-3/4”<br />
Victory: All '04-'12 Models<br />
(Jackpot, Kingpin, Vegas,<br />
Hammer) with digital gauge<br />
(except Vision)<br />
Universal: Speedometers &<br />
tachometers 3-3/4” diameter with<br />
7/16” of exposed bezel/sidewall<br />
4016 Speedo/Tach Visor (ea)<br />
Fits: Speedometers & tachometers<br />
3-1/4” diameter with 1/8” of<br />
exposed bezel/sidewall<br />
W W W . K U R Y A K Y N . C O M<br />
$ 26.99<br />
$ 25.99<br />
4016<br />
4016
8680 D D<br />
8681<br />
A. NECK COVER for valkyrie<br />
This beautifully chromed delta-shaped cover<br />
neatly hides the front tank tab & neck top.<br />
Stainless steel mounting hardware is included<br />
to com<strong>pl</strong>ete this easy installation.<br />
Fits: All ‘97-’04 Valkyrie Models (except Rune)<br />
$<br />
7855 Chrome Neck Cover 29.99<br />
for Valkyrie (ea)<br />
B. FENDER LOuVERS for vtx<br />
Your VTX Retro fender is classy but it cries<br />
out for these precision fitting molded chrome<br />
inserts - by far the finest available! Don’t<br />
confuse ours with other ill-fitting, poor quality<br />
versions out there<br />
Fits: All ’03-’09 VTX1300 Retro/S/T & all<br />
’02-’08 VTX1800 Retro/S/T Models<br />
$<br />
9018 Front Fender Louvers (set) 32.99<br />
$<br />
9019 Rear Fender Louvers (set) 32.99<br />
D<br />
B<br />
8680<br />
A C<br />
C. HANDLEBAR RISER ACCENTS<br />
for m109r<br />
Most peo<strong>pl</strong>e agree, this Cruiser is one of the greatest available. It<br />
doesn’t need much but these easy stick-on chrome Riser Accents sure<br />
make a difference.<br />
Fits: ’06-’12 Suzuki M109R Models<br />
$<br />
8682 Handlebar Riser Accents (pr) 41.99<br />
D. TRIPLE TREE COVER SET for vtx<br />
This is the ultimate front end dress-up kit for the VTX. We offer a 5-piece<br />
set that includes a one-piece cover for the top tri<strong>pl</strong>e clamp, chrome fork<br />
tube caps, & covers for the lower tri<strong>pl</strong>e clamp for the VTX1800C. We<br />
offer a 3-piece set that includes a one-piece cover for the top tri<strong>pl</strong>e clamp<br />
& a pair of die-cast fork tube caps for the VTX1300. This kit provides the<br />
look of a custom chrome re<strong>pl</strong>acement tri<strong>pl</strong>e tree set at a fraction of the<br />
cost & with significantly less work!<br />
8680 Upper & Lower Tri<strong>pl</strong>e Tree Cover Set (pr)<br />
Fits: ’02-’08 VTX1800C/F<br />
$<br />
8681 Upper Tri<strong>pl</strong>e Tree Cover (ea)<br />
59.99<br />
Fits: ’03-’09 VTX1300R/S/T/C<br />
Note: Requires removal of handlebar/riser assembly & headlight mount during installation.<br />
$ 59.99<br />
8 6 6 . 2 7 7 . 9 5 9 8 169<br />
BIKE MAPS<br />
GOLDWING<br />
CAN-AM<br />
SPORT BIKE<br />
LIGHTING<br />
ACCESSORY<br />
MOUNTS<br />
HANDLEBAR<br />
CONTROLS<br />
FOOT<br />
CONTROLS<br />
<strong>CHROME</strong><br />
LUGGAGE<br />
TOURING<br />
AIR CLEANERS<br />
MISC<br />
INDEX
FRONT CALIPER COVER for honda<br />
Details make the difference! In just a few minutes<br />
your front brake caliper can spring to life with this<br />
brilliant chrome cover. Styled to com<strong>pl</strong>ement the<br />
Rear Caliper Cover, the pair provides a balanced,<br />
integrated look. Installation is a snap with high<br />
strength peel-&-stick adhesive.<br />
$<br />
1282 Fits: All‘03–’09 VTX1300 Retro/S/T Models 39.99<br />
& '08-'12 Shadow 750 Aero Models (ea)<br />
$<br />
1284 Fits: All‘03–’09 VTX1300C Models & '08-'12 39.99<br />
Shadow 750 Spirit/ Phantom Models (ea)<br />
170<br />
BRAKE COVERS<br />
FRONT<br />
CALIPER COVERS<br />
for yamaha<br />
This bold design evokes the look of a high performance six<br />
piston brake caliper. With multi<strong>pl</strong>e cutouts, keep the look light<br />
or install the black back <strong>pl</strong>ate & cover everything up. Installs<br />
with high strength peel-&-stick adhesive.<br />
Fits: All ’06-’12 Roadliner, Stratoliner & Deluxe Models, all<br />
‘04-‘12 Road Star 1700 Models (except Warrior), & all '08-'12<br />
Raider Models<br />
8701 Front Caliper Covers (set)<br />
$ 69.99<br />
1294<br />
7825<br />
1298<br />
7820<br />
7821<br />
BRAKE COmPONENT<br />
DRESS-uP KIT for honda & kawasaki<br />
All kits include a re<strong>pl</strong>acement fluid reservoir cap & a<br />
wrap-around reservoir cover. The kit for the VTX1800C/F<br />
also <strong>pl</strong>aces a streamlined cover on the master cylinder. All<br />
components feature a dazzling chrome finish.<br />
7820 Brake Dress-Up Kit (ea)<br />
Fits: ’02-’08 VTX1800C/F<br />
7821 Brake Dress-Up Kit (ea)<br />
Fits: ’03-’08 VTX1800 Retro/S/T/N, all<br />
'09-'12 Fury Models & '10-'12 VT1300<br />
Custom Line (Sabre, Stateline & Interstate)<br />
7822 Brake Reservoir Cap (cap only)<br />
Fits: Honda: '03-'09 VTX1300, '02-'08<br />
VTX1800<br />
Kawasaki: '02-'08 Mean Streak,<br />
'03-'08 1600 Classic & Nomad, '11-'12<br />
Vaquero 1700<br />
CALIPER COVER<br />
This wicked looking cover installs in minutes. No<br />
tools required.<br />
1294 Fits: Kawasaki: All Vulcan 900/1500/1600<br />
Suzuki: 800 Volusia/Boulevard C50/M50<br />
Yamaha: V Star 1100/1300, Stryker &<br />
Royal Star Venture (ea)<br />
REAR mASTER CYLINDER COVER<br />
for yamaha<br />
FRONT CALIPER COVERS for vtx1800<br />
Perk up that front end by adding these super easy to<br />
install chrome Caliper Covers.<br />
Fits: All ’03-’08 VTX1800 Models (except Early ‘03 &<br />
‘07-’08 Models or other Models with caliper bleeder<br />
screw between brake line fittings)<br />
1298 Caliper Covers for VTX1800 (pr)<br />
$ 49.99<br />
$ 39.99<br />
$ 29.99<br />
$ 21.99<br />
Get a clean finished look in minutes.<br />
Fits: All ‘99-’12 Road Star 1600/1700 Models (except<br />
Warrior), & '09 -'12 V Star 950<br />
7825 Rear Master Cylinder Covers (ea)<br />
W W W . K U R Y A K Y N . C O M<br />
$ 31.99<br />
$ 20.99
REAR<br />
CALIPER COVER<br />
Finish off that rear brake with our pure custom<br />
looking Rear Caliper Cover. You won’t believe the<br />
difference!<br />
1299 Rear Brake Caliper Cover (ea)<br />
Fits: ‘02-’08 Honda VTX1800 Models<br />
1289 Rear Caliper Cover (ea)<br />
Fits: ‘06-’12 Suzuki M109R Models<br />
13/16" W x<br />
1-3/8” T<br />
1231<br />
1289<br />
2013<br />
2015<br />
$ 39.99<br />
$ 29.99<br />
BRAKE BLEEDER SCREw COVER &<br />
BANjO BOLT COVER<br />
Easily installed, these pieces provide a nice detail when<br />
dressing up brake calipers & master cylinders on Cruisers.<br />
2013 Bleeder Screw Covers (pr)<br />
2015 Banjo Bolt Cover (ea)<br />
Fits: Most Cruisers with Banjo Fittings<br />
Requiring a 12mm wrench<br />
BuLLET COVERS for banjo bolts<br />
Perfect accent for caliper bolts.<br />
1231 Bullet Banjo Bolt Covers (ea)<br />
Fits: All VTX1800 Models - Hand<br />
Control Clutch Banjo Bolt, Most Banjo<br />
Bolts require a 12mm wrench & only<br />
have 1 line protruding (Universal fit)<br />
$ 19.99<br />
$ 15.99<br />
$ 13.99<br />
1299<br />
REAR CALIPER COVER<br />
for kawasaki & suzuki<br />
Styled to im<strong>pl</strong>y speed & motion, our Rear<br />
Caliper Cover creates a powerful high-tech<br />
look. The rich chrome finish adds a bright spot<br />
to the rear wheel area & is much easier to keep<br />
clean than the stock finish. Installation is sim<strong>pl</strong>e & quick with<br />
high strength peel-&-stick adhesive.<br />
Fits: Kawasaki: All ’06-’12 Vulcan 900 Models, all ’03-’08 Vulcan 1600<br />
Models, all ’04–’10 Vulcan 2000 Models, all Vulcan 1600 Mean Streak, all<br />
’02–’08 Vulcan 1500, & all '09-'12 Vulcan 1700 Classic<br />
Suzuki: All ’06–’12 M109 Models, all ’08-’09 C109 & ‘09 M90 Models<br />
1283 Rear Caliper Cover (ea)<br />
$ 39.99<br />
REAR BRAKE<br />
CALIPER COVER for vtx1300<br />
Flow chrome over that Rear Brake Caliper & make it<br />
sparkle! Easy installation.<br />
Fits: All ’03-’09 VTX1300 Models<br />
1288 Rear Brake Caliper Cover (ea)<br />
$ 39.99<br />
8 6 6 . 2 7 7 . 9 5 9 8 171<br />
BIKE MAPS<br />
GOLDWING<br />
CAN-AM<br />
SPORT BIKE<br />
LIGHTING<br />
ACCESSORY<br />
MOUNTS<br />
HANDLEBAR<br />
CONTROLS<br />
FOOT<br />
CONTROLS<br />
<strong>CHROME</strong><br />
LUGGAGE<br />
TOURING<br />
AIR CLEANERS<br />
MISC<br />
INDEX
mARquIS CHOKE KNOB COVER U.S. Patent 5,836,214<br />
Our attractive chrome Choke Knob Cover installs easily without removing or modifying the<br />
stock choke knob.<br />
Fits: Honda: All VTX1300, '04-’09 Shadow 750 Aero/Spirit C2<br />
Kawasaki: Vulcan 800/1500/1600<br />
Yamaha: '99-’07 Road Star 1600/1700 & All Royal Star Venture, V Star 650/1100<br />
2009 Marquis Choke Knob Cover (ea)<br />
PETCOCK COVER for vtx1300<br />
Add the finishing touch to your drab fuel petcock by covering those unfinished parts with<br />
style. The left side of your tank will now look high class.<br />
Fits: All '03-’09 VTX1300 Models<br />
7830 Petcock Cover for VTX1300 (ea)<br />
SHIFTER PIVOT COVER for vtx<br />
On a finely finished bike like the VTX, you don’t want an<br />
ugly weld showing on an otherwise decent shift lever.<br />
Fits: ’02-’08 VTX1800 Retro/S/N/T<br />
4046 Shifter Pivot Cover (ea)<br />
mEGA HORNS<br />
Be heard loud & clear with our trumpet style horns for your ride. With<br />
new Mega Horn technology, get that loud air horn style sound in one little<br />
package. Installs swiftly in front of your motor along your front frame tubes.<br />
Ride on & be heard.<br />
7737 Mega Horns with Mount (ea)<br />
Fits: Honda: All VTX1800/1300 Models<br />
Note: Engine guards may limit installation.<br />
172<br />
7830<br />
4046<br />
2009<br />
$ 139.99<br />
KOOL KAPS chrome covers<br />
$ 19.99<br />
$ 29.99<br />
$ 39.99<br />
Cover those unsightly & unfinished bolt heads with brilliant chrome.<br />
2447 For 3/4” Hex Bolts* (10 pack)<br />
2451 For 3/4” hex head bolt used in<br />
Küryakyn Highway Pegs* (pr)<br />
$ 11.99<br />
$ 2.99<br />
DRIVER FOOTPEG<br />
mOuNT COVERS for vtx1300c<br />
Finish off those unfinished welds on your driver footpeg<br />
mounts even if you aren’t a skilled welder! Our Driver<br />
Footpeg Mount Covers work great with stock pegs & also<br />
do wonders at showing off custom peg ap<strong>pl</strong>ications.<br />
Fits: '03-’09 VTX1300C<br />
7011 Driver Footpeg Mount Covers (pr)<br />
works great<br />
on our highway pegs!<br />
* Requires a small amount of silicone. Found at local hardware store or order Küryakyn P/N 400039 for $8.99.<br />
7011<br />
W W W . K U R Y A K Y N . C O M<br />
$ 49.99
ATTITuDE<br />
mEDALLIONS<br />
Add a personalized flair to your ride! Perfect<br />
for the left side of your Yamaha Motor or to any<br />
flat surface with a 4-1/2” diameter. Sim<strong>pl</strong>e &<br />
affordable - A great way to show off a<br />
little attitude.<br />
Fits: Universal peel-&-stick ap<strong>pl</strong>ications - Requires<br />
a 4-1/2” diameter flat surface<br />
Yamaha: All ’06-’12 Roadliner, Stratoliner/Deluxe<br />
& ’08-’12 Raider Left Tranny Cover & Front Drive<br />
Hub Cover, & all ’07-’12 V Star 1300 & Stryker,<br />
’09-’12 V Star 950 Front Drive Hub Cover Only &<br />
All V Star 650 Models on Air Cleaner Covers<br />
*Not recommended for Yamaha Engine ap<strong>pl</strong>ications - Use on<br />
flat surfaces only.<br />
chrome medallions<br />
3752 Helicopter Gunship (ea)<br />
3754 Firefighter (ea)<br />
3764 Deco* (ea)<br />
3795 Flame* (ea)<br />
1492<br />
1491<br />
add<br />
some flair!<br />
$ 19.99<br />
$ 19.99<br />
$ 19.99<br />
$ 19.99<br />
chrome medallions<br />
3796 Widow (ea)<br />
3797 Zombie (ea)<br />
3798 Chauvinist (ea)<br />
3799 Patriot (ea)<br />
3797<br />
3796<br />
3799<br />
3795<br />
3797<br />
$ 19.99<br />
$ 19.99<br />
$ 19.99<br />
$ 19.99<br />
3714<br />
zOmBIE mEDALLIONS<br />
3754<br />
black medallions<br />
3713 Widow, Black (ea)<br />
3714 Zombie, Black (ea)<br />
Keep a bunch of little Zombies with you wherever you are. Stick them on<br />
your motorcycle, toolbox, car, computer monitor—anywhere you think<br />
their sinister faces will brighten your day. Just peel off the backing &<br />
fasten them anywhere!<br />
1491 Large Zombie (pr)<br />
Requires 2” of flat surface for mounting<br />
1492 Small Zombie (pr)<br />
Requires 1” of flat surface for mounting<br />
Note: Re<strong>pl</strong>acements for Küryakyn P/N’s 7411,<br />
7412 7520, 7521, & 8712<br />
3713<br />
$ 19.99<br />
$ 18.99<br />
3752<br />
3764<br />
$ 18.99<br />
$ 18.99<br />
8 6 6 . 2 7 7 . 9 5 9 8 173<br />
3798<br />
BIKE MAPS<br />
GOLDWING<br />
CAN-AM<br />
SPORT BIKE<br />
LIGHTING<br />
ACCESSORY<br />
MOUNTS<br />
HANDLEBAR<br />
CONTROLS<br />
FOOT<br />
CONTROLS<br />
<strong>CHROME</strong><br />
LUGGAGE<br />
TOURING<br />
AIR CLEANERS<br />
MISC<br />
INDEX
174<br />
ENGINE<br />
FOR YAMAHA<br />
TAPPET BLOCK COVERS for yamaha<br />
Bolt directly over the bottom of your pushrod tubes & stand back to<br />
admire the chrome flowing from your pushrod tubes all the way down<br />
your bike. Road Stars can add the Cylinder Base Covers (P/N 7729) to<br />
com<strong>pl</strong>ete the new chromed base of your motor.<br />
7728 Fits: All ‘99-’12 Road Star 1600/1700 & ‘02-’09 Road Star<br />
Warrior Models (pr)<br />
7726 Fits: ‘06-’12 Roadliner/Stratoliner/Deluxe, ‘08-’12 Raider, all<br />
‘99-’12 Road Star 1600/1700, & ‘02-’09 Road Star Warrior<br />
Models (Includes 1 pair of Tappet Block Bottom Accents<br />
Only- no lower trim) (pr)<br />
1062<br />
$ 89.99<br />
$ 69.99<br />
CYLINDER BASE COVERS for road star<br />
Flow chrome across the left side of your motor & atop your transmission to get<br />
that expensive chromed motor look in minutes! Add our Tappet Block Covers<br />
(P/N 7728) for enhanced sparkle on the right side.<br />
Fits: All ‘99-’12 Road Star 1600/1700 & ‘02-’09 Road Star Warrior Models<br />
7729 Cylinder Base Covers (set)<br />
Note: Fully dress your motor with additional Yamaha OEM chrome motor covers.<br />
SHIFT ROD LINKAGES for yamaha<br />
$ 99.99<br />
Direct re<strong>pl</strong>acement installation. Let a little of your dark side out.<br />
Fits: All ’99-’12 Road Star 1600/1700 (except Warrior) & '08-'12 Raider Models<br />
1061 Widow Shift Rod Linkage (ea)<br />
1062 Zombie Shift Rod Linkage (ea) ©2008 Küryakyn<br />
7726 7725<br />
$ 89.99<br />
$ 89.99<br />
1061<br />
STARTER COVER for yamaha<br />
Crown the end of your starter in Sparkling chrome & add<br />
smooth chrome lines to the top of your industrious look starter.<br />
This will really dress up the look of the front of your motor.<br />
$<br />
7725 All ’06 -’12 Roadliner, Statoliner, 49.99<br />
Deluxe, & Raider Models (ea)<br />
PuSHROD TOP COVERS for yamaha<br />
Connect the chrome between your valve covers & push rod<br />
tubes on the right side of your motor.<br />
7759 Fits: ‘99-’03 Road Star 1600 Models (pr)<br />
FINNED SPARK PLuG COVERS<br />
for road star 1700<br />
7761 Fits: All ‘04-’07<br />
Road Star 1700<br />
Models (except<br />
Warrior)<br />
For Carbureted<br />
Models Only (pr)<br />
7759<br />
$ 39.99<br />
7728<br />
W W W . K U R Y A K Y N . C O M<br />
$ 39.99
A. ENGINE CAm<br />
ADjuSTER BOLT COVER<br />
for victory<br />
Cover those unsightly cam adjuster bolts with these<br />
great looking, gear tooth designed accents. Engineered<br />
exclusively for the Victory motor, these covers bolt on &<br />
coordinate with all the Victory chrome engine accents.<br />
7684 Fits: All '06-'12 Victory Models, Cruisers<br />
& Touring (pr)<br />
B. CHROmE DIPSTICK COVER<br />
for victory<br />
As useful as dipstick’s are, they can be an eyesore &<br />
take away from the look of your motor. This new chrome<br />
dipstick cover features a gear tooth design that looks great<br />
& retains the functionality of stock. Installation is quick &<br />
easy to get you back on the road in no time.<br />
7682 Fits: All '06-'12 Victory Models, Cruisers &<br />
Touring (ea)<br />
Note: Only for 100" or 106" motors.<br />
$ 45.99<br />
D. CLuTCH ARm COVER<br />
for victory<br />
No other clutch arm cover offered for the Victory motor<br />
looks this good or installs this easy. Featuring a gear tooth<br />
design & sim<strong>pl</strong>e bolt on installation to get you back on the<br />
road in no time.<br />
7686 Fits: All '04-'12 Victory Models,<br />
Cruisers & Touring (ea)<br />
E. SmOOTH V<br />
for victory<br />
C. ROuLETTE HORN COVER for victory<br />
A chrome horn is just seconds away with this great looking cover. Retains the<br />
sound & improves the look on horns mounted between the frame down tubes.<br />
7689 Fits: All '04-'12 Victory Vegas, Kingpin, Hammer,<br />
Jackpot, 8 Ball & Universal for '04-'12 Models with<br />
horn mounted at neck between front down tubes (ea)<br />
E<br />
D<br />
B<br />
A<br />
A<br />
B<br />
E<br />
$ 59.99<br />
D<br />
$ 34.99<br />
ENGINE<br />
FOR VICTORY<br />
$ 39.99<br />
Update you Victory side covers with a smooth chrome look<br />
that’ll really stand out. Installs in just minutes for a truly<br />
unique look unlike any other.<br />
7685 Fits:'03-'12 Victory Models with V<br />
shaped covers between cylinders,<br />
Fits both Left & Right side (pr)<br />
7689<br />
$ 59.99<br />
Renderings<br />
Shown<br />
8 6 6 . 2 7 7 . 9 5 9 8 175<br />
C<br />
C<br />
BIKE MAPS<br />
GOLDWING<br />
CAN-AM<br />
SPORT BIKE<br />
LIGHTING<br />
ACCESSORY<br />
MOUNTS<br />
HANDLEBAR<br />
CONTROLS<br />
FOOT<br />
CONTROLS<br />
<strong>CHROME</strong><br />
LUGGAGE<br />
TOURING<br />
AIR CLEANERS<br />
MISC<br />
INDEX
ENGINE<br />
FOR HONDA<br />
176<br />
7703<br />
7708<br />
7703<br />
7731<br />
W W W . K U R Y A K Y N . C O M
7703<br />
7708<br />
OWN A<br />
SHOW-STOPPING<br />
MOTOR AT A<br />
REASONABLE<br />
PRICE!<br />
ENGINE CASE COVERS<br />
for honda<br />
Amaze everyone with the look of a new<br />
show-stopping chrome motor on your VTX1300,<br />
VT1300 Custom Line or Fury. See both sides of your<br />
motor & even your clutch sparkle with chrome. No<br />
more drab gray areas around the heart of your<br />
motor any more.<br />
7703 Fits: All ‘03-’09 VTX1300 Models<br />
$<br />
7731 Fits: All '09-'12 Fury, All '10-'12 199.99<br />
VT1300 Custom Line (Sabre,<br />
Stateline, & Interstate)<br />
CHROmE BOTH SIDES OF YOuR ENGINE!<br />
ENGINE COVER INSERTS<br />
for honda<br />
$ 199.99<br />
Dress up your <strong>pl</strong>ain chrome engine covers with<br />
these racy, speed-lined Engine Cover Inserts. Sold<br />
in sets of 3, our molded ABS chrome-<strong>pl</strong>ated inserts<br />
stick to the smooth clutch, timing, & left crankcase<br />
covers adding depth & a machined from billet look.<br />
Easily installed without tools. Sim<strong>pl</strong>e peel-&-stick<br />
installation.<br />
7707 Engine Cover Inserts (set/3)<br />
Fits: All ‘02-’08 VTX1800 Models<br />
7708 Engine Cover Inserts (set/3)<br />
Fits: All ‘03-’09 VTX1300 Models & all<br />
'09-'12 Fury Models, all '10-'12 VT1300<br />
Custom Line (Sabre, Stateline & Interstate)<br />
ALSO AVAILABLE<br />
1. BOOmERANG FRAmE TRIm<br />
PG 180<br />
2.DRIVE SHAFT COVER<br />
PG 180<br />
3.ADDITIONAL REAR<br />
ENDCHROmE<br />
PG 180-181<br />
$ 69.99<br />
$ 69.99<br />
8 6 6 . 2 7 7 . 9 5 9 8 177<br />
BIKE MAPS<br />
GOLDWING<br />
CAN-AM<br />
SPORT BIKE<br />
LIGHTING<br />
ACCESSORY<br />
MOUNTS<br />
HANDLEBAR<br />
CONTROLS<br />
FOOT<br />
CONTROLS<br />
<strong>CHROME</strong><br />
LUGGAGE<br />
TOURING<br />
AIR CLEANERS<br />
MISC<br />
INDEX
7709<br />
LOOKS GREAT WITH<br />
OuR ENGINE CASE<br />
COVERS!<br />
CLuTCH HOuSING SHROuD<br />
for vtx1800<br />
We designed this part to finish the job started by our Engine<br />
Case Covers. Made of stamped steel with chrome-<strong>pl</strong>ated<br />
construction this piece installs quickly & easily with industrial<br />
strength adhesive tape to perfectly cover the exposed upper<br />
surface of the clutch housing.<br />
Fits: All ’02-’08 VTX1800 Models with Küryakyn<br />
Engine Case Covers (P/N 7704) only<br />
7709 Clutch Housing Shroud (ea)<br />
178<br />
9002<br />
8261<br />
9002<br />
$ 59.99<br />
AFTER<br />
BEFORE<br />
8261<br />
3/4”<br />
3-1/8”<br />
9001<br />
REAR SHOCK TOP COVER for honda<br />
Chrome shocks with a dull chrome top mount? Not good. Finish the chrome all<br />
the way to the top with our Rear Shock Top Cover & notice the difference. With<br />
Küryakyn styled blood grooves, these covers finish the shock top out right.<br />
Fits: All Honda VTX1800 (except N) & all VTX1300, Shadow 1100 Sabre/Spirit,<br />
Shadow 750 Ace/Aero/Spirit/Phantom & other Models with shocks matching<br />
dimensions shown<br />
8261 Rear Shock Top Cover for Honda (pr)<br />
$59.99<br />
REFLECTOR COVERS for honda & yamaha<br />
Heighten visibility while adding a stylized cover!<br />
9001 Small Reflector Covers (pr)<br />
Fits: Front: All VTX1800, all 1100 Spirit (front & rear), all 750<br />
Spirit, all Shadow VLX 600, '10-'12 VT1300 Custom Line & other<br />
motorcycles with reflectors that are 3-5/16” by 1-1/4” or smaller<br />
with 1/4” of clearance around the reflector<br />
9002 Large Reflector Covers (pr)<br />
Fits: Front: All Yamaha Road Star, V Star 950, 1100, Royal Star &<br />
Royal Star Venture, Raider & Stryker<br />
Rear: Honda: ‘02-’07 VTX1800 (except C) Models & ‘03-’06 1300<br />
Retro/S/T, & other motorcycles with reflectors that are 3-1/2” by<br />
1-3/8” or smaller with 1/4” of clearance around the reflector<br />
W W W . K U R Y A K Y N . C O M<br />
9001<br />
$ 19.99<br />
$ 19.99
ENGINE CASE COVERS<br />
for vtx1800<br />
Com<strong>pl</strong>ete the creamy, luscious appearance of your VTX1800 with<br />
these ultimate Engine Case Covers! Fit snugly along the base of<br />
the engine below the fins on both sides. They look like expensive<br />
chromed-engine cases but they bolt on in minutes & cost a heck<br />
of a lot less.<br />
Fits: All ‘02-’08 VTX1800 Models<br />
7704 Engine Case Covers<br />
$ 199.99<br />
7704<br />
DON'T MISS<br />
EnginE covEr insErts - A sim<strong>pl</strong>e & great looking addition!<br />
SEE PG 177<br />
REAR TANK TRIm<br />
for vtx1300c<br />
7824<br />
Add some shine & fill the void between the gas<br />
tank & your seat with this stylish chrome accent.<br />
Keep the lines of your bike flowing & cover up those<br />
crude welds on the back of your tank with a quick &<br />
easy installation.<br />
Fits: ‘03-’09 VTX1300C Models<br />
7824 Rear Tank Trim for VTX1300C (ea)<br />
INTAKE RuNNER/SPARK<br />
PLuG COVER for valkyrie<br />
Re<strong>pl</strong>ace the dull cast surface with<br />
beautiful show-chromed finish.<br />
7705 Fits: Valkyrie<br />
& Valkyrie<br />
Tourer (except<br />
Interstate) (pr)<br />
$ 89.99<br />
$ 39.99<br />
after<br />
7704<br />
8 6 6 . 2 7 7 . 9 5 9 8 179<br />
7704<br />
TRANSmISSION<br />
COVER SET for valkyrie<br />
Put the finishing touch on your<br />
cast transmission case & nicely<br />
com<strong>pl</strong>ement existing chrome engine<br />
components.<br />
7710 Fits: All Valkyrie<br />
Models (except<br />
Rune) (pr)<br />
$ 169.99<br />
BIKE MAPS<br />
GOLDWING<br />
CAN-AM<br />
SPORT BIKE<br />
LIGHTING<br />
ACCESSORY<br />
MOUNTS<br />
HANDLEBAR<br />
CONTROLS<br />
FOOT<br />
CONTROLS<br />
<strong>CHROME</strong><br />
LUGGAGE<br />
TOURING<br />
AIR CLEANERS<br />
MISC<br />
INDEX
180<br />
REAR END<br />
A. BOOmERANG<br />
FRAmE TRIm for vt1300 & fury<br />
Cover those huge black side panels with aggressive styling &<br />
beautiful chrome. These boomerang covers give you the ultimate<br />
custom look without spending excess time & money to chrome<br />
the frame. VT1300 Custom owners add the Küryakyn Drive Shaft<br />
Cover (P/N 8951) & prepare to be amazed!<br />
8950 Fits: ‘10-'12 VT1300 Custom Line (Sabre/<br />
Stateline/Interstate) Models (pr)<br />
8952 Fits: ‘09-’12 Fury Models (pr)<br />
B. DRIVE SHAFT COVER for vt1300<br />
Want the look of a custom chrome drive shaft without the<br />
wasted time & extra hassle of tearing apart the rear end? This<br />
cover will give you a custom look in minutes & will cost you<br />
much less than chrome <strong>pl</strong>ating all the original parts.<br />
Fits: ‘10-'12 VT1300 Custom Line (Sabre/ Stateline/<br />
Interstate) Models<br />
8951 Drive Shaft Cover (ea)<br />
VTX1300 Shown<br />
FOR HONDA<br />
$ 99.99<br />
F<br />
8305 Shown<br />
$ 119.99<br />
$ 119.99<br />
D E C F<br />
A<br />
B<br />
C<br />
D<br />
8260<br />
W W W . K U R Y A K Y N . C O M
D<br />
D. DRIVE HuB TOP COVER for vtx<br />
Imagine a great football team with no quarterback. Adding one key<br />
<strong>pl</strong>ayer can create a legendary combination. Announcing Küryakyn’s<br />
top draft pick; the Drive Hub Top Cover for the VTX. Add this new<br />
<strong>pl</strong>ayer to your bike & our gleaming Chrome Drive Shaft Cover (P/N<br />
8285) & this team could be on its way to the <strong>pl</strong>ayoffs!<br />
Fits: All Honda VTX1300/1800 Models with Küryakyn Drive Shaft<br />
Cover (P/N 8285)<br />
8688 Drive Hub Top Cover for VTX (ea)<br />
F. FRAmE TRIm for vtx<br />
Transform that rough black frame<br />
forging into a sleek, stylish,<br />
attention getter. This two-piece kit<br />
attaches with high-strength, high<br />
temp adhesive for quick & easy<br />
installation.<br />
8260 Fits: All VTX1800 (pr)<br />
8305 Fits: All VTX1300 (pr)<br />
$ 89.99<br />
$ 79.99<br />
E. SwINGARm COVER for vtx<br />
Your friends are going to think you went out & bought a whole custom swingarm with this show-chrome cover. It'll<br />
set you apart & is the perfect com<strong>pl</strong>ement to our Drive Shaft Cover (P/N 8285).<br />
Fits: All ‘03-’09 VTX1300 & ‘02-’08 VTX1800 Models<br />
8287 Swingarm Cover for VTX (ea)<br />
A<br />
$ 99.99<br />
$ 99.99<br />
B<br />
C. DRIVE SHAFT COVER for vtx<br />
U.S. Patent D549,622<br />
Compare our Drive Shaft Cover to others on the market. This<br />
setup sets a whole new standard. Two-piece, chrome-<strong>pl</strong>ated<br />
stamped steel construction covers both the differential &<br />
shaft tube giving the appearance of a com<strong>pl</strong>etely chromed<br />
assembly.<br />
Fits: All ‘03-’09 VTX1300 & ’02-’08 VTX1800 Models<br />
8285 Drive Shaft Cover for VTX (ea)<br />
$ 139.99<br />
8 6 6 . 2 7 7 . 9 5 9 8 181<br />
BIKE MAPS<br />
GOLDWING<br />
CAN-AM<br />
SPORT BIKE<br />
LIGHTING<br />
ACCESSORY<br />
MOUNTS<br />
HANDLEBAR<br />
CONTROLS<br />
FOOT<br />
CONTROLS<br />
<strong>CHROME</strong><br />
LUGGAGE<br />
TOURING<br />
AIR CLEANERS<br />
MISC<br />
INDEX
182<br />
REAR END<br />
FOR YAMAHA<br />
A. LOwER BELT<br />
GuARD ACCENT for road star<br />
Want to sparkle up that drab stock belt guard?<br />
This accent is easily added to the lower belt guard<br />
to protect the OEM belt while covering the black<br />
<strong>pl</strong>astic. WOW! What a difference!<br />
Fits: All ‘99-’12 Road Star 1600/1700 Models<br />
(except Warrior)<br />
8663 Lower Belt Guard Accents (ea)<br />
$ 89.99<br />
C. PHANTOm COVERS<br />
for road star<br />
CHROmE YOuR ENTIRE VISIBLE<br />
SwINGARm IN mINuTES!<br />
Add the finishing touches to the tail end of your swingarm & smooth out<br />
those lines. These little beauties cover up the axle, adjustment bolts, &<br />
rough casting in one easy step.<br />
8229 Fits: All '99-'12 Road Star (except Warrior) (pr) Note:<br />
Right side on '07-'12 Models requires aftermarket exhaust with 1"<br />
clearance from axle nut.<br />
$<br />
8665 Fits: All ’99-‘12 Road Star (except Warrior) with stock 79.99<br />
exhaust or other that covers right rear axle bolt (pr)<br />
Note: When checking for appropriate clearance, <strong>pl</strong>ease remember swingarms move<br />
separate from your exhaust mounts. Compress & extend suspension for proper clearance.<br />
B. SwINGARm COVERS for road star<br />
Want the appearance of an expensive chrome swingarm without the hassle of tearing apart the back end of your bike?<br />
Chrome your whole visible swingarm with our Swingarm Cover Kit & add that extra shine in minutes for a fraction of the<br />
price.<br />
8262 Fits: All ’99-’12 Road Star (except Warrior) (set)<br />
Note: Right side on ‘07-’12 Models requires aftermarket exhaust with 1” clearance from axle nut.<br />
$<br />
8664 Fits: All ’99-‘12 Road Star (except Warrior) with stock exhaust or other that covers right 149.99<br />
rear axle bolt (set)<br />
Note: When checking for appropriate clearance, <strong>pl</strong>ease remember swingarms move separate from your exhaust mounts. Compress & extend suspension for<br />
proper clearance.<br />
B<br />
A B<br />
8262<br />
D<br />
8229<br />
$ 149.99<br />
C E<br />
$ 69.99<br />
W W W . K U R Y A K Y N . C O M
E<br />
D. BOOmERANG FRAmE TRIm for road star<br />
Chrome your rear frame supports with smooth elegant beauty the sim<strong>pl</strong>est<br />
way possible! These metal covers bolt directly over your bland frame &<br />
include all the hardware you will need for a seamless installation. You’ll get<br />
the look of a custom chromed frame for a fraction of the cost!<br />
Fits: All ‘99-’12 Road Star 1600/1700 Models (except Warrior)<br />
E. FRONT DRIVE PuLLEY COVER for road star<br />
Customize your Road Star & add some class with the look of motion to your front drive<br />
pulley cover. Installation takes only seconds.<br />
Fits: All ‘99-’12 Road Star 1600/1700 Models (except Warrior)<br />
8960 Front Drive Pulley Cover (ea)<br />
D<br />
8662 Boomerang Frame Trim for Road Star (set)<br />
$ 39.99<br />
ADD THE LOOK OF mOTION!<br />
$ 139.99<br />
A<br />
8 6 6 . 2 7 7 . 9 5 9 8 183<br />
B<br />
D<br />
C<br />
BIKE MAPS<br />
GOLDWING<br />
CAN-AM<br />
SPORT BIKE<br />
LIGHTING<br />
ACCESSORY<br />
MOUNTS<br />
HANDLEBAR<br />
CONTROLS<br />
FOOT<br />
CONTROLS<br />
<strong>CHROME</strong><br />
LUGGAGE<br />
TOURING<br />
AIR CLEANERS<br />
MISC<br />
INDEX
Zombie Medallion<br />
pg 173<br />
184<br />
REAR END<br />
FOR YAMAHA<br />
A<br />
A. SIDE COVER ACCENT for yamaha<br />
A touch of chrome in just the right <strong>pl</strong>ace to accent an area that usually<br />
goes unnoticed. Featuring a stylish ribbed design & made from<br />
lightweight ABS, this cover uses ultra strong VHB tape for a secure hold<br />
& quick installation.<br />
Fits: All ’08-‘12 Yamaha Raider Models & '06-'12 Roadliner,<br />
Stratoliner & Deluxe<br />
8944 Side Cover Accent for Yamaha (ea)<br />
$ 39.99<br />
D<br />
A A B<br />
C<br />
B. TOP BELT GuARD for yamaha<br />
Sim<strong>pl</strong>e elegance. This fully chromed re<strong>pl</strong>acement guard with<br />
its turned-down end & stylish side accents only enhance the<br />
original lines of the rear end. Easy two bolt installation.<br />
Fits: All ’08-‘12 Yamaha Raider Models & '06-'12 Roadliner,<br />
Stratoliner & Deluxe<br />
8940 Top Belt Guard (ea)<br />
$ 79.99<br />
W W W . K U R Y A K Y N . C O M<br />
B
License Plate Bracket<br />
pg 189<br />
D<br />
Custom Bullet<br />
Turn Signals<br />
pg 103<br />
Covers Left<br />
Side Only<br />
C<br />
C. SwINGARm AxLE ADjuSTER COVER for raider<br />
This two-piece creation was not only designed to conceal but also gracefully highlight<br />
the trailing edge of your swingarm without being too overbearing. The removable center<br />
allows access for belt adjustments when needed. Select the original or short cover to suit<br />
your style & be amazed. (Sold individually)<br />
Fits: All ‘08-‘12 Yamaha Raider Models - Fits both left & right side of swingarm (sold<br />
individually)<br />
Note: Only P/N 8942 installs on right side with Vance & Hines Exhaust.<br />
8941 Swingarm Axle Adjuster Cover (ea)<br />
8942 Short Swingarm Axle Adjuster Cover (ea)<br />
8941<br />
8942<br />
COVERS BOTH SIDES OF YOuR SwINGARm!<br />
LOOKS GREAT WITH...<br />
licEnsE <strong>pl</strong>atE brackEt<br />
Re<strong>pl</strong>ace your sub fender with our uniquely<br />
styled re<strong>pl</strong>acement.<br />
SEE PG 189<br />
$ 89.99<br />
$ 69.99<br />
8942<br />
D. BOOmERANG FRAmE COVER for yamaha<br />
A renowned Küryakyn parts designer once said, “Chrome won’t get you home, but you’ll<br />
look good when you get there.” This natural transition covers the black frame rails with a<br />
flash of chrome that catches the eye & provides a more flowing appearance. One of the<br />
most aesthetically <strong>pl</strong>easing additions you can make to these already beautiful motorcycles.<br />
Fits: All ’08-‘12 Yamaha Raider Models & '06-'12 Roadliner, Stratoliner & Deluxe (Covers<br />
left side only)<br />
8943 Boomerang Frame Cover (ea)<br />
ALSO AVAILABLE<br />
$ 59.99<br />
1.TAPPET BLOCK COVERS<br />
PG 174<br />
2.CHROmE FORK PROTECTOR COVERS<br />
PG 168<br />
8 6 6 . 2 7 7 . 9 5 9 8 185<br />
BIKE MAPS<br />
GOLDWING<br />
CAN-AM<br />
SPORT BIKE<br />
LIGHTING<br />
ACCESSORY<br />
MOUNTS<br />
HANDLEBAR<br />
CONTROLS<br />
FOOT<br />
CONTROLS<br />
<strong>CHROME</strong><br />
LUGGAGE<br />
TOURING<br />
AIR CLEANERS<br />
MISC<br />
INDEX
BOOmERANG FRAmE COVERS<br />
for v star 650 & 1100<br />
Easily installed, these show-chromed, die-cast frame covers make artwork<br />
out of a part of your bike that would otherwise fade into the background.<br />
The kit for the V Star 1100 includes a pair of upper frame covers that<br />
smooth the transition from the Boomerang Frame Cover to the fender.<br />
$<br />
8236 Fits: All V Star 650 Models (pr) 109.99<br />
$<br />
8237 Fits: All V Star 1100 Models (pr) 169.99<br />
8286<br />
REAR END<br />
FOR V STAR<br />
SHAFT DRIVE COVER for v star 650 & 1100<br />
U.S. Patent D549,621<br />
Give the rear differential the effect of a chromed housing<br />
at a fraction of the cost. Our Shaft Drive Cover integrates<br />
nicely with our Phantom Covers. Easy add-on with a<br />
two-bolt installation.<br />
Fits: ’99-’09 V Star 1100 & ’98-’11 V Star 650 Models<br />
8286 Shaft Drive Cover for V Star (ea)<br />
mID-FRAmE COVERS<br />
for v star 1100<br />
Turn that drab black frame tube under your<br />
seat into a real eye catcher. When added to<br />
our Boomerang Frame Cover it looks like you’ve<br />
chromed the whole frame! Quick & sim<strong>pl</strong>e to install.<br />
8255 Fits: All ’99-’09 V Star 1100 Models (pr)<br />
186<br />
8286<br />
8236<br />
$ 69.99<br />
8203<br />
$ 89.99<br />
CLuTCH CABLE<br />
ADjuSTER COVER<br />
PHANTOm COVERS<br />
for v star 650 & 1100<br />
Turn a hodge-podge of fasteners, frame tubes, axles, hubs<br />
etc. into one smooth-sculpted chrome area. The kit includes<br />
covers to hide the bolt heads that secure the drive housing to<br />
the swingarm.<br />
Fits: ‘98-’11 V Star 650, ‘99-’09 V Star 1100 (‘06-’11 V Star<br />
650 & 1100 right sides require aftermarket exhaust that allows<br />
3/4” clearance from exhaust mount bracket & axle nut)<br />
8203 Phantom Covers for V Star (pr)<br />
Note: When checking for appropriate clearance on ‘06-‘11 Models <strong>pl</strong>ease<br />
remember swingarms move separate from your exhaust mounts. Compress &<br />
extend the suspension for proper clearance.<br />
Hide the crude, zinc-<strong>pl</strong>ated cable adjuster!<br />
Installs with easy-to-handle spring clips.<br />
2017 Fits: All Kawasaki 800<br />
Vulcan (ea)<br />
2023 Re<strong>pl</strong>acement Spring<br />
Clips for P/N 2017 (pr)<br />
8237<br />
8286<br />
2017<br />
$ 41.99<br />
$ 2.99<br />
$ 79.99<br />
FERRuLE COVER<br />
for v star<br />
Here’s a little flash of chrome for V<br />
Star Speedo cables. Just slip it into<br />
<strong>pl</strong>ace & tighten the set screw.<br />
2024 Fits: V Star 650<br />
Models (ea)<br />
8203<br />
2024<br />
W W W . K U R Y A K Y N . C O M<br />
$ 19.99
L.E.D. LAYDOwN CuRVED<br />
LICENSE PLATE for victory & universal<br />
Nobody likes to have a license <strong>pl</strong>ate, but we all have to have one. So here is the solution to make it look good,<br />
maintain functionality, & remain legal all on a sim<strong>pl</strong>e bolt on package. This curved <strong>pl</strong>ate frame features L.E.D.<br />
backlighting & a 15 degree mounting angle that flows with the lines on your bikes rear fender.<br />
Fits: '10-'12 Victory Cross Roads & Cross Country, Universal, Bolts to flat <strong>pl</strong>ate mount (Widest mounting slot is 5"<br />
wide) for 4"x7" <strong>pl</strong>ate<br />
7688 Laydown Curved License Plate Frame (ea)<br />
Com<strong>pl</strong>iant with FMVSS#571.108 & marked SAE DOT L 11.<br />
LICENSE PLATES<br />
$ 109.99<br />
FuLL LICENSE PLATE<br />
ILLuMINATION!<br />
P/N 7688 & 9198<br />
uSE BACKPLATE SHOwN<br />
CuRVED TIP-BACK<br />
LICENSE PLATE FRAmE<br />
Add the Curved Tip-Back License Plate Frame & smooth out<br />
the back of your fender. With 8˚ of angle & a curved frame,<br />
this chrome beauty holds a 4” x 7” <strong>pl</strong>ate & bolts directly to<br />
your stock OEM license <strong>pl</strong>ate mount.<br />
Fits: Bolts directly to flat stock OEM license <strong>pl</strong>ate mount.<br />
Widest mounting slot is 5" wide.<br />
9198 Curved Tip-Back License Plate Frame (ea)<br />
Note: Doesn't fit VT1300 Stateline or Interstate.<br />
works great on short<br />
bobtail fenders too!<br />
Side<br />
View<br />
$ 69.99<br />
8 6 6 . 2 7 7 . 9 5 9 8 187<br />
BIKE MAPS<br />
GOLDWING<br />
CAN-AM<br />
SPORT BIKE<br />
LIGHTING<br />
ACCESSORY<br />
MOUNTS<br />
HANDLEBAR<br />
CONTROLS<br />
FOOT<br />
CONTROLS<br />
<strong>CHROME</strong><br />
LUGGAGE<br />
TOURING<br />
AIR CLEANERS<br />
MISC<br />
INDEX
188<br />
CuRVED LAYDOwN<br />
LICENSE PLATE mOuNT<br />
The rear fenders on today’s Cruisers are very<br />
impressive. The license <strong>pl</strong>ate bracket & reflectors are<br />
a different story. Our streamlined License Plate Mount<br />
holds a 4" x 7” <strong>pl</strong>ate & is truly the final touch needed.<br />
Such a difference for so little money.<br />
Fits: ’03-’09 VTX1300 Retro/S/T or ’02-’08 VTX1800<br />
Retro/S/T Models<br />
9171 Curved Laydown<br />
License Plate Mount (ea)<br />
$ 79.99<br />
wORKS GREAT wITH<br />
RuN-TuRN-BRAKE<br />
CONTROLLER<br />
PG 100<br />
CuRVED LICENSE PLATE FRAmE<br />
wITH DuAL ACCENT LIGHTING<br />
With its gentle curved contour & snug, fender-hugging mount, this<br />
license <strong>pl</strong>ate frame has a distinctive look all its own. For even more<br />
sizzle, red L.E.D. accent lights operate in run/brake, or run/turn modes.<br />
White L.E.D.’s provide additional <strong>pl</strong>ate illumination at night. A perfect<br />
com<strong>pl</strong>ement to Run-Turn-Brake Controllers this <strong>pl</strong>ate ties right in for all 3<br />
functions. Designed to fit 4” x 7” <strong>pl</strong>ates.<br />
Fits: ’03-’09 VTX1300 Retro/S/T, ’02-’08 VTX1800 Retro/S/T Models &<br />
Universal Lay Down Ap<strong>pl</strong>ications<br />
3166 Curved License Plate Frame with Dual Accent Lighting (ea)<br />
Note: Universal ap<strong>pl</strong>ications requires drilling holes in fender.<br />
W W W . K U R Y A K Y N . C O M<br />
$ 139.99
FuLL LICENSE PLATE ILLuMINATION!<br />
L.E.D. LIGHTED LICENSE PLATE FRAmE<br />
wITH TRI-LIGHT Patent Pending<br />
Now you can add additional lighting & hide that ugly stock license <strong>pl</strong>ate mount at the same time. This great<br />
looking curved frame features a white L.E.D. license <strong>pl</strong>ate light & three red strip lights with running & brake<br />
functions all wrapped in a brilliant chrome finish. Designed to mount to the existing factory license <strong>pl</strong>ate<br />
bracket, installation is sim<strong>pl</strong>ified, & with 8 degrees of tip back the rear of the bike will be transformed.<br />
Fits: Universal: Bolts directly to flat stock OEM license <strong>pl</strong>ate mount (Requires 3" of clearance for Tri-Light)<br />
3152 L.E.D. License Plate Frame with Tri-Light (ea)<br />
Com<strong>pl</strong>iant with FMVSS#571.108 & marked SAE DOT L 11<br />
SuB-FENDER<br />
LICENSE PLATE BRACKET<br />
with l.e.d. curved frame<br />
The best single way to improve the looks of<br />
this sweet ride is to fully remove & re<strong>pl</strong>ace the<br />
OEM billboard with our Curved License Plate<br />
Frame. The compact brackets clean up your<br />
rear end & allow stock, custom, or Silver Bullet<br />
Turn Signals to be installed. The gleaming<br />
chrome frame is illuminated with cool white<br />
L.E.D.’s built right in. Now that’s more like it!<br />
Fits: All ‘08-‘12 Yamaha Raider Models (Holds<br />
a 4" x 7" Plate)<br />
9257 License Plate Bracket with<br />
L.E.D. Curved Frame (kit)<br />
$ 189.99<br />
Note: Turn signal mounts allow reinstallation of stock turn<br />
signals or others that mount with a 5/16” bolt or stud.<br />
$ 149.99<br />
tri-light can be<br />
mounted on top<br />
or bottom!<br />
BOTH RuNNING & BRAKE<br />
FuNCTION<br />
wORKS GREAT wITH<br />
OuR uNIVERSAL & BuLLET<br />
TuRN SIGNALS<br />
PG 103-104<br />
8 6 6 . 2 7 7 . 9 5 9 8 189<br />
BIKE MAPS<br />
GOLDWING<br />
CAN-AM<br />
SPORT BIKE<br />
LIGHTING<br />
ACCESSORY<br />
MOUNTS<br />
HANDLEBAR<br />
CONTROLS<br />
FOOT<br />
CONTROLS<br />
<strong>CHROME</strong><br />
LUGGAGE<br />
TOURING<br />
AIR CLEANERS<br />
MISC<br />
INDEX
9166<br />
LICENSE FRAmE<br />
& BACK PLATE SET<br />
Our chrome frame & back <strong>pl</strong>ate<br />
will dress up your license <strong>pl</strong>ate<br />
when using the stock bracket.<br />
Fits: 4” x 7” Plates<br />
9166 License Frame &<br />
Back Plate Set<br />
Note: Acorn nuts not included.<br />
LIGHTED<br />
LICENSE PLATE FRAmE<br />
9165<br />
This chrome die-cast frame incorporates two high<br />
intensity light bulbs that are wired separately. Wire<br />
one each to your brake & tail lamp circuits or<br />
together for an extra bright stop or running light.<br />
Includes integrated white light for <strong>pl</strong>ate illumination.<br />
Fits: 4” x 7” Plates<br />
$<br />
9167 Lighted License Plate Frame (ea) 49.99<br />
Note: Not intended to re<strong>pl</strong>ace O.E. brake or taillight.<br />
190<br />
NEW BRIGHTER FuLL LICENSE PLATE ILLuMINATION!<br />
$ 21.99<br />
LAYDOwN LICENSE HOLDER<br />
Designed to re<strong>pl</strong>ace Harley’s standard 3-bolt<br />
license <strong>pl</strong>ate bracket, this baby streamlines your<br />
fender by tilting the <strong>pl</strong>ate back. Kit includes<br />
rubber wedge so you have an option as to how<br />
far the <strong>pl</strong>ate lays down.<br />
Fits: Universal for Custom Ap<strong>pl</strong>ications (Holds a<br />
4" x 7" Plate) License Plate Frame not Included<br />
Note: May require drilling holes in fender.<br />
$<br />
9165 Laydown License 39.99<br />
Plate Holder (ea)<br />
L.E.D. LIGHTED CuRVED<br />
LICENSE PLATE FRAmE<br />
for aero 750 & custom ap<strong>pl</strong>ications<br />
Finish off those clean lines of the Aero with this custom Curved<br />
License Plate Mount. Solid metal parts, L.E.D. lights, & curved<br />
design smooths out the lines of the bulky stock mount. Sim<strong>pl</strong>e<br />
installation uses the stock mounting holes. (Holds a 4" x 7" Plate)<br />
Fits: All ’04-’12 Honda 750 Shadow Aero Models & Universal<br />
Custom Ap<strong>pl</strong>ications<br />
9255 L.E.D. Lighted Curved<br />
License Plate Mount (ea)<br />
Note: Universal ap<strong>pl</strong>ications may require drilling holes in your fender.<br />
Com<strong>pl</strong>iant with FMVSS#571.108 & marked SAE DOT L 11<br />
9167<br />
$ 119.99<br />
9164<br />
3160 3161<br />
SwEPT EAGLE license <strong>pl</strong>ate frame<br />
BALL-mILLED LICENSE PLATE FRAmES<br />
This contemporary eagle license <strong>pl</strong>ate frame can<br />
be the final touch you need.<br />
3161 Fits: Universal 4”x 7” Plates (ea)<br />
LONE EAGLE license <strong>pl</strong>ate frame<br />
Show your American pride!<br />
3160 Fits: Universal 4”x 7” Plates (ea)<br />
$ 49.99<br />
The one thing most custom license <strong>pl</strong>ate frames have in common is they’re too<br />
small to fit some of the state’s license <strong>pl</strong>ates! This frame is offered in two sizes<br />
to fit 4-3/8” x 8” & 4” x 7” <strong>pl</strong>ates. Depending on which <strong>pl</strong>ate you’re working<br />
with, some minor modifications may still be necessary but this will make many<br />
installations much easier. Glistening chrome finish with ball-milled accents.<br />
$<br />
9164 Large License Plate Frame (ea) 29.99<br />
$<br />
9163 Small License Plate Frame (ea) 29.99<br />
W W W . K U R Y A K Y N . C O M<br />
$ 49.99
lit/<br />
unlit<br />
9251<br />
NEW BRIGHTER<br />
FuLL LICENSE PLATE<br />
ILLuMINATION!<br />
HOW TO ORDER:<br />
1. SELECT LICENSE HOLDER STYLE<br />
2. SELECT REQUIRED MOTORCYCLE SPECIFIC MOUNT CLAMP<br />
9252<br />
TAILLIGHT CAN BE INSTALLED<br />
ON TOP OR BOTTOm!<br />
9252<br />
L.E.D. CuRVED SIDE<br />
mOuNT LICENSE HOLDERS<br />
In the past, if you wanted a cool, custom side-mount license <strong>pl</strong>ate you paid<br />
through the nose. Our product brings the price down to reality without<br />
compromising style & function. Choose your <strong>pl</strong>ate then get the correct Mounting<br />
Clamps. Sized to fit 4” x 7” <strong>pl</strong>ates only.<br />
1<br />
LICENSE HOLDERS<br />
9253 Chrome Curved Horizontal Side Mount (ea)<br />
9251 Chrome Curved Vertical Side Mount (ea)<br />
9252 Chrome Lighted Curved Vertical Side Mount with Taillight (ea)<br />
3125 Gloss Black Curved Horizontal Side Mount (ea)<br />
Com<strong>pl</strong>iant with FMVSS#571.108 & marked SAE DOT L 11<br />
2<br />
$ 119.99<br />
$ 119.99<br />
$ 159.99<br />
$ 119.99<br />
Note: Not intended for use with saddlebags. Please check local laws regarding side mount license<br />
<strong>pl</strong>ates before ordering. Mount Clamps required for installation - Sold separately (below).<br />
mOuNT CLAmPS<br />
Required for installation of Küryakyn Side Mount License Holders.<br />
chrome<br />
3174 Fits: All Honda VTX1300/1800 (ea)<br />
3175 Fits: Yamaha Road Star without swingarm covers (except Warrior)<br />
& other motorcycles with 1-1/4” diameter swingarms (ea)<br />
3176 Fits: Yamaha V Star 1100/650 (ea)<br />
3177 Fits: Yamaha Road Star (except Warrior) with Küryakyn Swingarm<br />
Covers (P/N 8262 & 8664) (ea)<br />
3182 Fits: All Kawasaki ‘07-’12 Vulcan 900 Models & All ‘04-’10 Vulcan<br />
2000 Models (ea)<br />
gloss black<br />
3120 Fits: VTX 1300/1800 (ea)<br />
3125<br />
9253<br />
3121 Fits: Yamaha Road Star without swingarm covers (except Warrior)<br />
& other motorcycles with 1-1/4”diameter swingarms (ea)<br />
3122 Fits: All Kawasaki ‘06-’12 Vulcan 900 Models & All ‘04-’10 Vulcan<br />
2000 Models (ea)<br />
Note: Please check local laws regarding side mount license <strong>pl</strong>ates before ordering.<br />
3175<br />
$ 32.99<br />
$ 31.99<br />
$ 31.99<br />
$ 32.99<br />
$ 32.99<br />
$ 32.99<br />
$ 32.99<br />
$ 32.99<br />
8 6 6 . 2 7 7 . 9 5 9 8 191<br />
BIKE MAPS<br />
GOLDWING<br />
CAN-AM<br />
SPORT BIKE<br />
LIGHTING<br />
ACCESSORY<br />
MOUNTS<br />
HANDLEBAR<br />
CONTROLS<br />
FOOT<br />
CONTROLS<br />
<strong>CHROME</strong><br />
LUGGAGE<br />
TOURING<br />
AIR CLEANERS<br />
MISC<br />
INDEX
192<br />
9399<br />
A. LICENSE PLATE HELmET<br />
LOCK wITH mOuNT<br />
Lights Not Included<br />
Add this License Plate Helmet Lock & conveniently<br />
lock your helmet to your motorcycle. The sim<strong>pl</strong>e little<br />
mounting <strong>pl</strong>ate easily bolts to the back of almost any<br />
motorcycle & allows the easiest access for locking your<br />
helmet.<br />
4248 License Plate Helmet Lock (ea)<br />
Note: Will not install with Curved License Plate Frames or Swept/<br />
Lone Eagle License Plate Frames.<br />
$ 49.99<br />
B. LICENSE PLATE mARKER LIGHT/<br />
TuRN SIGNAL mOuNT<br />
Mount auxiliary marker lights or turn signals to your<br />
license <strong>pl</strong>ate. This sim<strong>pl</strong>e system mounts directly to the<br />
back of your license <strong>pl</strong>ate with support backing <strong>pl</strong>ate &<br />
two side mount brackets. The side mount brackets have a<br />
3/8” hole & will accept Küryakyn Silver Bullets or L.E.D.<br />
Mini Bullets (See pgs 103-104).<br />
Note: Great option for allowing the mounting of saddlebags on bikes<br />
that need to relocate turn signals. Will not work with Küryakyn<br />
Curved License Plate Frames.<br />
4247<br />
License Plate Marker<br />
Light Mount (ea)<br />
$ 39.99<br />
L.E.D. LICENSE<br />
PLATE BOLT LIGHTS<br />
Light up your license <strong>pl</strong>ate whether it’s in the stock<br />
location or custom mounted with these white L.E.D.<br />
bolt lights. You won’t find a cleaner license <strong>pl</strong>ate<br />
lighting option with a sim<strong>pl</strong>er installation.<br />
9199 L.E.D. License Plate Bolt Lights (pr)<br />
Note: 1/4”-20 Mounting Stud. Chrome Frame sold separately (P/N 9163 - pg 190).<br />
Not intended for use with Küryakyn Curved Frames.<br />
L.E.D. LICENSE PLATE ILLumINATORS<br />
with red accent lights<br />
Each License Plate Illuminator has two L.E.D.’s. The white L.E.D. lights up the license <strong>pl</strong>ate &<br />
the rear-facing red L.E.D. can function as an auxiliary running light, turn signal, or brake<br />
light for added visibility. The 1/4”- 20 mounting stud makes it sim<strong>pl</strong>e to bolt them on, wire<br />
them in, & ride on!<br />
9399 L.E.D. License Plate Bolt Lights with Red Accent Light (pr)<br />
Not intended for use with Küryakyn Curved Frames.<br />
D. INSPECTION PLATE<br />
This small chrome dis<strong>pl</strong>ay bracket mounts cleanly in any<br />
location dictated by local or state regulations. Now you don’t<br />
have to mess up a nice paint job or chrome surface with some<br />
cheesy government sticker. Universal fitment.<br />
9168<br />
9162<br />
Inspection Plate<br />
3-1/2” x 3-1/2” (ea)<br />
Texas Inspection Plate<br />
2-7/8” x 4” (ea)<br />
$ 46.99<br />
$ 46.99<br />
$ 19.99<br />
$ 34.99<br />
A B C D<br />
C. TuRN SIGNAL RELOCATOR KIT<br />
Get the best of both worlds! Now you can mount a set of Edge<br />
Saddlebags & keep your stock turn signals. This kit takes all the guess<br />
work out of relocating your stock signals by moving them from the<br />
fender to the license <strong>pl</strong>ate area. Side mount brackets have several<br />
mounting points for lights & will accept most OEM rear turn signals.<br />
$<br />
3155 Turn Signal Relocator Kit (kit) 49.99<br />
Note: Will not work with Küryakyn Curved License Plate Frames.<br />
works well with:<br />
• 5/16” or 3/8” small & large silver bullets<br />
• p/n 5032 turn signal<br />
• küryakyn mini bullets<br />
W W W . K U R Y A K Y N . C O M