coo.var - Brintex

Floor, Sport
and
Line Marking
Tennis Court and Drive Paint
W449
LINE AND COURT MARKING PRODUCTS
KEY BENEFITS
TIN SIZES:
A water thinned coating designed to
provide colour on asphalt and tar
based tennis courts. Ideal for
tarmac drives and paths.
5ltr
COLOURS:
SUITABLE SURFACES:
Red Green Black
STABLE ASPHALT, CONCRETE, TARMAC FINISH:
DRYING
TIME:
OVERCOAT: 6hrs
SEMI-MATT
APPLICATION:
1hour 4hrs
SPECIAL NOTES:
Apply a coat thinned 10% with water on
porous surfaces, otherwise apply direct.
Decorates driveways. Suitable for
outdoor use.
Not suitable for use when
temperature is below 7 °C.
BRUSHWASH/THINNERS: WATER
ESTIMATED 5-9
m COVERAGE:
Recommended Dried Film
Thickness Per Coat:
35-40 microns
Recommended Wet Film
Thickness Per Coat:
100-110 microns
2 depending
on porosity
/ltr
Acrylic Line Marking Paint
oo.var
of the surface
W463
LINE AND COURT MARKING PRODUCTS
KEY BENEFITS
TIN SIZES:
A water thinned acrylic resin based
line marking paint for interior and
exterior use on concrete, asphalt or
tarmac. Ideal for use where the
2.5ltr, 5ltr
COLOURS:
release of organic solvents is
restricted. Suitable for concrete tennis
and sports courts. For marking or
segregating a specific area.
SUITABLE SURFACES:
Yellow White Black Red
5ltr only
FINISH:
SEMI-MATT
APPLICATION:
CONCRETE, TARMAC, WOOD
DRYING
TIME:
OVERCOAT:
ESTIMATED 10
m COVERAGE:
Recommended Dried Film
Thickness Per Coat:
30-35 microns
Recommended Wet Film
Thickness Per Coat:
100 microns
2 1hrs 4hrs
6hrs
/ltr
SPECIAL NOTES:
Apply a coat thinned 10% with water
on porous concrete, otherwise apply
directly to the surface. Perfect tennis
court marking paint. Not suitable for
use when temperature is below 7 °C.
BRUSHWASH/THINNERS: WATER
Teamac Chlorvar Chlorinated
Rubber Swimming Pool Paint
G149 SPORT PRODUCTS
KEY BENEFITS
One of the best ways to ensure chemical and water
resistance. Gives outstanding protection against a wide
range of chemicals and aqueous solutions, particularly to
acids and can be used as a swimming pool coating below
water. Suitable for salt water.
coo.var®
COVERING OUR CUSTOMERS’ NEEDS SINCE 1908
Low Odour Line Marking Paint
G119
KEY BENEFITS
A sprit based paint which can be
applied directly to tarmac. Ideal for
use in factories where fast drying is
a high priority. For marking specific
areas.
SUITABLE SURFACES:
SEALED CONCRETE, TARMAC, WOOD
DRYING
OVERCOAT: 4-6hrs
SPECIAL NOTES:
Apply direct to tarmac. Seal porous
surfaces first. Technical advice
available on 01482 328053.
Fast drying for industrial areas.
BRUSHWASH/THINNERS: THINNERS 18
Roadline Aerosol
Q108
30mins 4hrs
KEY BENEFITS
A simple to use, convenient marking
system. Suitable for line markings
in car parks, tennis courts, roads,
factories and building sites for
specific areas.
SUITABLE SURFACES:
CONCRETE, WOOD, METAL, TARMAC
DRYING OVERCOAT:
15mins 2hrs 2hrs
SPECIAL NOTES:
Quick and easy to apply markings to
a variety of surfaces. Ideal for giving
instructions in a hurry. Can be used
with stencils for specific messages.
Wheel Applicators available.
SUITABLE SURFACES:
METAL, WOOD, ASBESTOS,
BRICK, CONCRETE, PLASTER
DRYING
TIME:
2hrs 24hrs
OVERCOAT: 16hrs
SPECIAL NOTES:
Mix well before use.
LINE AND COURT MARKING PRODUCTS
TIN SIZES:
2.5ltr, 5ltr
COLOURS:
Yellow White Black Red
5ltr only
Other
Colours
to order.
FINISH:
SEMI-GLOSS
APPLICATION:
10
m
Recommended Dried Film
Thickness Per Coat:
35-40 microns
Recommended Wet Film
Thickness Per Coat:
100 microns
2 ESTIMATED
COVERAGE: /ltr
LINE AND COURT MARKING PRODUCTS
TIN SIZES:
5ltr
COLOURS:
White Black Blue
Other colours to order.
TIN SIZES:
750ml aerosol
COLOURS:
Yellow White Black Red Blue Green
FINISH:
MATT
APPLICATION:
APPLY
DIRECT
ESTIMATED COVERAGE:
50mm wide line
60-100m
depending on
long line per can
application weight.
FINISH:
GLOSS
APPLICATION:
APPLY
DIRECT
ESTIMATED COVERAGE:
14m2 /ltr
Recommended Dried Film
Thickness Per Coat: 20-25 microns
Recommended Wet Film
Thickness Per Coat: 75 microns
BRUSHWASH/THINNERS: CHLORINATED RUBBER THINNERS 15
RAL & BS colours available to order
10 For further assistance regarding Coo-Var Line Marking Products
Safety
and Security
Vandalene Anti-Climb Paint
C264
KEY BENEFITS
A thick single pack non-drying product
of a sticky nature. Helps protect
property from intruders by providing a
slippery surface. For use on window
ledges, down pipes, walls, gutters,
anywhere which may be used as a
grip point to gain unauthorised
access. Also contains a hidden
identifier.
SUITABLE SURFACES:
WOOD, METAL, MASONRY
DRYING
TIME:
non
drying
SPECIAL NOTES:
Seal porous surfaces first with
Coo-Var Acrylic Primer Sealer.
Abrade and prime smooth surfaces
as required.
BRUSHWASH/THINNERS: THINNERS 14
BRUSHWASH/THINNERS: ANTI GRAFFITI Q607/7
RAL & BS colours available to order
SECURITY PRODUCT
TIN SIZES:
All
0.8kg, 2kg, 4kg colours
500ml aerosol (black only)
COLOURS:
Tile Red Green Black Grey
FINISH:
SEMI MATT
APPLICATION:
APPLY
DIRECT
ESTIMATED 2
m COVERAGE:
Recommended Film
Thickness Per Coat:
0.5mm
2 2
m /Kg 2 at 0.5mm
/Kg thickness
Poster available for
added deterrent.
Anti-Graffiti Coating – Two Pack
P101
KEY BENEFITS
A two pack polyurethane coating
which provides a highly graffitiresistant
finish inside or outside with
B.S Flame Spread Rating. Ideal for
bridges, statues, walls, toilets and
more. Can be used over compatible
water based paints to provide
a glaze over a colour. Not for use over
conventional solvent based paints.
SUITABLE SURFACES:
WOOD, BRICK, MASONRY, PLASTER
DRYING
tack
TIME:
free Full cure 5-7 days.
4-6hrs
OVERCOAT:
16hrs 72hrs
min max
Pot Life 6 to 8 hours.
SPECIAL NOTES:
Can be applied to existing unpainted
surfaces and water based paints.
SECURITY PRODUCT
TIN SIZES:
5kg (2 Pack)
COLOURS:
Clear
Colours available
to special order
FINISH:
GLOSS
APPLICATION:
ESTIMATED 7-8
m
COVERAGE:
Recommended Dried Film
Thickness Per Coat:
65 to 75 microns
Recommended Wet Film
Thickness Per Coat:
120 to 135 microns
2 Depending
/kg on porosity
of surface
call Coo-Var Technical Services on +44 (0)1482 328 053
Graffiti Protection System
GP101
KEY BENEFITS
This single pack system offers
long-term protection against both
graffiti and flyposting. Fast drying
- two coats can be applied in one
day. Wash off graffiti using only
water - no solvents required. May
be suitable for plastic, metal and
paint (check with Technical
Services first).
SUITABLE SURFACES:
BRICK, CONCRETE/RENDER,
SANDSTONE
DRYING
TIME:
30mins 2hrs
OVERCOAT:
4hrs
min
SPECIAL NOTES:
Do not use solvents to clean off
graffiti from GP101. On porous
surfaces use Anti-graffiti Sealer Coat
(Q462) first.
Sealer Coat for GP101
KEY BENEFITS
Likely to be needed before applying
GP101 Graffiti Protection System
onto porous surfaces. A
transparent sealer which also
offers excellent water and mildew
resistance. Being acrylic based,
this is low odour, non flammable
and low toxicity. This Sealer Coat
can also be used to minimise the
darkening of sandstone and other
natural stone.
SUITABLE SURFACES:
POROUS SURFACES
DRYING
TIME: 40mins 2hrs
OVERCOAT: 2hrs 24hrs 24 Hours with GP101
SPECIAL NOTES:
To be used under GP101
Graffiti Protection System.
See guidance notes for
application details.
BRUSHWASH/THINNERS: WATER
SECURITY PRODUCT
TIN SIZES:
2.5ltr, 5ltr
COLOURS:
Clear
FINISH:
GLOSS
APPLICATION:
ESTIMATED 8-101-2
m COVERAGE:
Recommended Dried Film
Thickness Per Coat:
55 microns
1-2
Recommended Wet Film
Thickness Per Coat:
100 microns
2 /ltr
BRUSHWASH/THINNERS: THINNERS 14 (BRUSHWASH ONLY, DO NOT THIN)
min
min
Graffiti Protection System
SECURITY PRODUCT
TIN SIZES:
2.5ltr
COLOURS:
Clear
FINISH:
OFF GLOSS
APPLICATION:
ESTIMATED 10-151-2
m COVERAGE:
Recommended Dried Film
Thickness Per Coat:
22 microns
1-2
Recommended Wet Film
Thickness Per Coat:
65 microns
2 APPLY
DIRECT
/ltr
coo.var®
COVERING OUR CUSTOMERS’ NEEDS SINCE 1908
11