2012 Off Road Catalog: Electrical - Free Catalog Request

E
L
E
C
T
R
I
C
A
L
REPLACEMENT SPEED SENSOR
FOR KOSO GAUGES
Universal speed sensor with 6.5’ cable
$27.99
PARt No. 40-8360
WATER TEMPERATURE
SENSOR ADAPTERS
Allows you to mount included water
temperature sensors inline on
14mm-26mm hoses ❖ 10mm internal
thread ❖ Clamps included
SIZE PARt No. PRICE
14mm 40-8508 $27.99
16mm 40-8509 29.99
972
SIZE PARt No. PRICE
18mm 40-8510 $29.99
22mm 40-8511 31.99
CYLINDER HEAD
TEMPERATURE SENSORS
For 10mm or 14mm cylinder head
studs ❖ Range: 32-482°F/0-250°C
❖ Also available with waterproof
JST connector
$27.99
DESCRIPtIoN PARt No.
10mm 40-8819
10mm w/ JST connector 14-5403
14-5403
40-8508
SIZE PARt No. PRICE
26mm 40-8512 $34.99
40-8819
DESCRIPtIoN PARt No.
14mm 40-8820
14mm w/ JST connector 14-5404
HOUR METER AND
HOUR/ TACH METER
Maintenance times for oil changes,
valve adjustments, spark plugs and
more are tracked by the hour meter
❖ Works with any gas engine up to
two cylinders at speeds up to 8000
rpm; check your rpm with the hour/ tach meter ❖ Hours automatically
roll over and record and display up to 9,999.9 ❖ Easily attach
with the included hardware ❖ No batteries are needed as the hour
meter connects to the spark plug wire ❖ Encased in 100% epoxy
❖ Resolution in 10 rpm increments ❖ PART NO. 40-7216 fits all
single- and twin-cylinder 2- and 4-stroke gas engines operating with
firing pattern 1 spark = 1 rpm; PART NO.
40-7215 fits all gas engines ❖ 2.2” L x 1.5” W $34.95
DESCRIPtIoN PARt No.
Hour meter 40-7215
DESCRIPtIoN PARt No.
Hour meter w/ tachometer 40-7216
STEERING STEM
HOUR METER MOUNT
Mount fits the steering stem post
and nut on most 125, 250, 450
and larger dirt bikes ❖ Will fit
Moose hour meters PART NOS.
40-7215, 40-7216 and 40-8433
❖ Corrosion-resistant construction ❖ Easy to install
❖ Made in the U.S.A.
$7.95 PARt No. 40-9134
HOUR METER
Fits all vehicles ❖ No battery required; connect to
spark plug ❖ Monitor service life of vehicle’s oil,
valve adjustment, spark plugs and more ❖ Easy
installation; peel and stick or attach with included
hardware, no wiring
PARt No. 40-9292
$65.99
SPEED SENSOR MAGNET BOLTS
Magnetic-head bolts offer a simple alternative
to gluing a sensor magnet to a
rotor or bolt ❖ Available in many sizes $5.99
SIZE PARt No.
5 /16-18 x 7 /8” L 40-8364
M5 x P0.8 x 12mm L 40-8365
M6 x P1.1 x 12.6mm L 40-8366
M6 x P1.1 x 19.7mm L 40-8367 1
OIL TEMPERATURE
SENSORS
Available in many sizes to
fit most applications; fit all
Koso gauges
SIZE PARt No.
M10 x P1.0 40-8516
M12 x P1.5 40-8517
SIZE PARt No.
M14 x P1.25 40-8518
M14 x P1.5 40-8519
SIZE PARt No.
M6 x P1.0 x 24mm L 40-8368
M8 x P1.25 x 22.5mm L 40-8369
M8 x P1.25 x 27.5mm L
1 PRICE $9.99.
40-8370
40-8516
AC/DC CONVERTER
Strong resistance in a sturdy, compact unit
❖ Input voltage range: 12-30V AC ❖ Output
voltage range: 12-15V DC ❖ Max load: 6W
$37.99
PARt No. 21-4570
40-8364
$14.99
SIZE PARt No.
M16 x P1.5 40-8520
RESETTABLE HOUR METER
Features three resettable service alarms that show when it’s time
to “clean air filter,” “change oil” and “valve service” ❖ Resettable
time mode allows you to record running time periods ❖ No power or
ground wires required ❖ Larger, easier-to-read display ❖ Resolution
in 10 rpm increments ❖ Fits all single- and twin-cylinder 2- and
4-stroke gas engines operating with firing pattern 1 spark = 1 rpm
❖ Includes double-sided tape, screws and fasteners ❖ Measures
2 1 /8” W x 1 3 /8” H x 1 /2” D with 1 3 /4” center-to-center mounting
distance on rear
$39.95 PARt No. 40-8443
GAS TANK BOLT
HOUR METER MOUNT
Streamline flush mount look
through mounts using OEM gas
tank bolt ❖ Will fit Moose hour
meters PART NOS. 40-7215,
40-7216 and 40-8433 ❖ Made of non-corroding aluminum ❖ Easy
installation ❖ Made in the U.S.A.
$9.95 PARt No. 40-9135
New Part Nos. OrderiNg &
teChNiCal
in DARK BLUE CustOmer serviCe 800-969-7601 suPPOrt320-358-3831
www.denniskirk.com