IER Brochure-A4.indd - The Dow Chemical Company
IER Brochure-A4.indd - The Dow Chemical Company
IER Brochure-A4.indd - The Dow Chemical Company
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
DOW DOW UPCORE and AMBERPACK<br />
Packed Bed Systems
UPCORE and AMBERPACK Packed Bed Systems<br />
With DOW Packed Bed Systems we offer you one of the<br />
best solutions instead of a compromise. DOW Packed Bed<br />
Systems are characterized by:<br />
1. Counterfl ow technology<br />
2. Compact system lay-out<br />
3. Low investment costs<br />
4. Cost effective operation<br />
5. Low rinse water requirement<br />
6. Effective handling of suspended solids<br />
7. Reliable and high operational availability<br />
AMBERPACK Packed Bed System<br />
<strong>The</strong> AMBERPACK System is an upfl ow service and downfl ow<br />
regenerated technology. It can be designed as single, double<br />
and triple compartment lay-out. <strong>The</strong> two and three compartment<br />
vessels can accommodate weak and strong electrolyte<br />
resin combinations resulting in high effi ciency systems. <strong>The</strong><br />
resin bed is packed between a lower and an upper nozzle plate.<br />
AMBERPACK SYSTEMS<br />
SAC SBA<br />
Single Compartment<br />
Our packed bed systems come with a complete<br />
engineering package, including manual, calculation tool,<br />
resin analysis service and availability of regional expertise<br />
on ion exchange resin technology to support you with design<br />
and resin selection for your project.<br />
DOW Packed Bed Systems are ideally suitable to<br />
demineralize and soften a large range of different feed<br />
waters up to the most stringent quality demands. Worldwide<br />
thousands of UPCORE and AMBERPACK Systems are<br />
in operation, with fl ow rates from 5 to more than 500 m3 /h<br />
per line.<br />
<strong>The</strong> AMBERPACK System is ideally suited to use AMBERJET <br />
Uniform Particle Size Resins. <strong>The</strong>se resins maximize the system<br />
performance and bring you the ultimate treated water quality.<br />
Other special resin grades are also available with high capacity<br />
and low pressure drop.<br />
AMBERLITE and AMBERJET PACKED BED RESINS<br />
PRODUCT<br />
Weak Acid Cation Resins<br />
TYPE MATRIX PARTICLE RECOMMENDED USES<br />
AMBERLITE IRC86RF<br />
Strong Acid Cation Resins<br />
Acrylic Gel Graded High Capacity WAC resin designed for use in AMBERPACK Systems.<br />
AMBERJET 1300 H Styrenic Gel Uniform High strength resin. Good for layered beds and mixed beds for<br />
polishing and pure water applications.<br />
AMBERLITE 252RF H<br />
Weak Base Anion Resins<br />
Styrenic Macro Graded High strength resin designed for packed beds where greater<br />
stability is needed in demineralization.<br />
AMBERLITE IRA96RF<br />
Strong Base Anion Resins<br />
Styrenic Macro Graded Styrenic WBA resin designed for use in packed beds<br />
Low Rinse, acrylic WBA designed for use in AMBERPACK Systems.<br />
Excellent organic barrier<br />
High strength, acrylic WBA designed for use in AMBERPACK Systems<br />
AMBERLITE IRA458RF CL Acrylic Gel Graded Acrylic type 1 SBA for packed beds where organic fouling<br />
resistance is required. Good on high sulfate waters.<br />
AMBERLITE IRA478RF CL Acrylic Gel Graded Bi-functional resin (WBA/SBA) which gives excellent capacity and<br />
organic fouling resistance.<br />
AMBERJET 4200 CL Styrenic Gel Uniform Uniform resin for most demineralization systems. Good balance of<br />
capacity and strength and silica leakage<br />
AMBERJET 4600 CL Styrenic Gel Uniform Uniform, type 2 SBA resin for most demineralization systems<br />
where high capacity is desired.<br />
AMBERLITE IRA900RF CL Styrenic Macro Graded High strength resin designed for packed beds where greater<br />
stability is needed in demineralization.<br />
SAC<br />
WAC<br />
SBA<br />
WBA<br />
Double Compartment
DOWEX UPCORE SYSTEM<br />
<strong>The</strong> DOWEX UPCORE system is a high effi ciency upfl ow<br />
regenerated and downfl ow service system. <strong>The</strong> resin bed is<br />
packed between an upper and lower nozzle plate. Besides<br />
a single, double and triple compartment vessel lay-out, the<br />
UPCORE System can be designed with a layered bed anion.<br />
A layered bed offers an option to minimize the system<br />
investment costs by accommodating weak and strong<br />
functional resins in only one vessel compartment.<br />
UPCORE SYSTEMS<br />
SAC SBA<br />
Single Compartment<br />
Because the service cycle operates downfl ow, the system<br />
is not sensitive to any variation in feed water fl ow and is<br />
capable of handling start, stop situations during production<br />
without quality upset or additional chemical consumption.<br />
<strong>The</strong> UPCORE System gives you maximum fl exibility during<br />
production without compromising effi ciency.<br />
Unlike any other ion exchange packed bed system, the<br />
UPCORE System brings you a solution to suspended solids<br />
handling. <strong>The</strong> UPCORE System is the only packed bed system<br />
with a self cleaning ability. As particulates accumulate at<br />
the top layer of the resin bed, they are swept out during the<br />
fi rst step of the upfl ow regeneration. <strong>The</strong> two compartment<br />
vessels can be backwashed without additional regeneration<br />
requirements. Both features maximize the systems availability<br />
and enhance effi ciency.<br />
DOWEX UPCORE PACKED BED RESINS<br />
PRODUCT<br />
Weak Acid Cation Resins<br />
TYPE MATRIX PARTICLE RECOMMENDED USES<br />
UPCORE MAC-3<br />
Strong Acid Cation Resins<br />
Acrylic Macro Gaussian High Capacity WAC resin designed for use in UPCORE Systems.<br />
High mechanical stability and resistance to oxidants.<br />
DOWEX UPCORE Mono<br />
Resins C-600<br />
Styrenic Gel Uniform Uniform SAC specifi cally designed for use in UPCORE Systems.<br />
DOWEX UPCORE Mono MC-525<br />
Weak Base Anion Resins<br />
Styrenic Macro Uniform Uniform, high strength resin designed specifi cally for<br />
UPCORE Systems.<br />
DOWEX UPCORE Mono WB-500<br />
Strong Base Anion Resins<br />
Styrenic Macro Uniform Uniform WBA specifi cally designed for use in UPCORE Systems.<br />
High regeneration effi ciency and organics removal.<br />
DOWEX UPCORE Mono A-500 Styrenic Gel All Uniform Uniform SBA designed for use in UPCORE Systems.<br />
DOWEX UPCORE Mono A-625 Styrenic Gel All Uniform Uniform SBA designed for use in layered bed UPCORE Systems,<br />
paired with UPCORE WB-550 Resins. High capacity, low<br />
pressure drop.<br />
DOWEX UPCORE Mono A2-500 Styrenic Gel All Uniform Uniform type 2 SBA specifi cally designed for use in<br />
UPCORE Systems.<br />
DOWEX UPCORE Mono MA-600<br />
Inert Material<br />
Styrenic Macro All Uniform Uniform SBA resin specifi cally designed for use in UPCORE Systems<br />
where high stability is required.<br />
DOWEX UPCORE Mono IF-62 inert n/a n/a n/a Inert resin specifi cally designed to be used in UPCORE Systems.<br />
WAC<br />
SAC<br />
WBA<br />
SBA<br />
Double Compartment
How to make your choice<br />
Each Packed Bed System has specifi c technical strong points on which you can base your selection. Our technical service<br />
specialists can offer you the best solutions and maximize your benefi ts.<br />
Technical Element Recommended System<br />
Self cleaning ability / handling of suspended solids UPCORE <br />
Optimized regeneration water consumption AMBERPACK <br />
<strong>The</strong> need to run process over variable or<br />
intermittent fl ow rates<br />
PACKED BED SIMPLIFIED SELECTION GUIDE<br />
UPCORE<br />
Low TDS water and high organics AMBERPACK<br />
Most suitable to retrofi t existing co-fl ow system UPCORE<br />
NOTICE: No freedom from infringement of any patent owned by <strong>Dow</strong> or others is to be inferred. Because use conditions and applicable laws may differ from one location to another and<br />
may change with time, Customer is responsible for determining whether products and the information in this document are appropriate for Customer’s use and for ensuring that Customer’s<br />
workplace and disposal practices are in compliance with applicable laws and other government enactments. <strong>The</strong> product shown in this literature may not be available for sale and/or<br />
available in all geographies where <strong>Dow</strong> is represented. <strong>The</strong> claims made may not have been approved for use in all countries. <strong>Dow</strong> assumes no obligation or liability for the information in<br />
this document. References to “<strong>Dow</strong>” or the “<strong>Company</strong>” mean <strong>The</strong> <strong>Dow</strong> <strong>Chemical</strong> <strong>Company</strong> and its consolidated subsidiaries unless otherwise expressly noted. NO WARRANTIES ARE GIVEN;<br />
ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY EXCLUDED.<br />
® Trademark of <strong>The</strong> <strong>Dow</strong> <strong>Chemical</strong> <strong>Company</strong> (<strong>Dow</strong>) or an affi liated company of <strong>Dow</strong><br />
177-02517<br />
06/2012, Rev. 0