Catalog Introduction - OCL Architectural Lighting

CONCEPT
OCL has the capability and experience to modify
and customize fixtures to meet unique design
challenges – as illustrated by this project for
South Coast Home Furnishings in Costa Mesa,
California. In the preliminary evaluation drawing,
the architecture and planning firm Lee & Sakahara
specified an outdoor wall-mounted fixture that
was UL wet-location listed with a logo laser-cut
in the center of the custom face design.
MATCH
As a starting point, we identified the OCL Monolith
Outdoor fixture as a close match in both size and
style to the fixture specified by Lee & Sakahara.
CUSTOMIZATION
Next, we presented our proposed design for the
project with a custom adaptation of the existing
fixture. We designed an aluminum face that was
laser cut and rolled to the correct size, and modified
the back housing to a depth of four inches. Finally,
we replicated the logo using a DXF drawing for a
truly custom look.
OCL can modify most fixtures by size, hanging system, lamping, diffuser, finish, and/or decorative cut-outs (i.e. logos, designs, room numbers).
We also have the capability to create truly custom light fixtures. Please contact OCL to discuss specific project requirements.
page 23