FOLAJET PP-WO ES
FOLAJET PP-WO ES
FOLAJET PP-WO ES
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Product Datasheet 21390.200.36100<br />
<strong>FOLAJET</strong> <strong>PP</strong>-<strong>WO</strong> <strong>ES</strong><br />
Pearl White Opaque <strong>PP</strong> Film for Ink Jet Printers with Solvent Inks<br />
<strong>FOLAJET</strong> <strong>PP</strong>-<strong>WO</strong> <strong>ES</strong> is a white opaque polypropylene film with a pearl coating on one<br />
side, particularly suited for printing with solvent inks (eco-, mild-, light-inks). The<br />
coating is characterized by an excellent water fastness and wet smear resistance and<br />
is thus also suited for applications such as advertising prints in outdoor applications.<br />
PIEZO ECO<br />
SOLVENT SOLVENT<br />
Characteristic<br />
QUICK<br />
DRY<br />
Suitable for Piezo printers<br />
Suitable for Eco Solvent Ink<br />
Suitable for Solvent Ink<br />
Fast dry coating<br />
Improved water resistance<br />
Good scratch resistance<br />
Good flatness, flexibly ductile<br />
Good ink absorption<br />
High resolution<br />
Weather proof prints<br />
Brilliant high resolution colour prints<br />
Finish<br />
Matt Surface<br />
Pearl white Surface<br />
Folex AG, Bahnhofstrasse 92, CH-6423 Seewen-Schwyz, Tel. +41 41 819 39 39, Fax +41 41 810 01 35<br />
www.folex.com, marketing@folex.ch<br />
29.11.2010 Update PDF Show online
Specifications<br />
Coating frontside For Ink Jet<br />
Print side Pearl, matted side / outside roll<br />
Base material Polypropylene<br />
Width (mm) 610<br />
Length (m) 30<br />
Width (inch) 24<br />
Length (ft) 98.43<br />
Total thickness (mm) 0.200<br />
Total thickness (mil) 8<br />
Packing quantity 1<br />
Compatibility<br />
Useable on most large format Ink Jet printers using solvent ink systems (Eco-, Light-,<br />
Mild- Solvent inks and similar inks).<br />
Not recommended for printing with oil or water based inks,<br />
Handling<br />
A preconditioning period of 24 hours within the printing environment is<br />
recommended.<br />
Between 15-30°C and 30-70% r.h.<br />
Lamination: cold or heat laminates (low-temp) possible but not necessary due to<br />
water-proof prints.<br />
Ink Load: approx. 220 - 280 % (may vary according to ink system).<br />
Heating system in printer possible up to approx. 40°C. If higher temperatures are<br />
required please test for suitability. Higher temperature may cause film deformation.<br />
Avoid fingerprints on printing side.<br />
Storage<br />
Unopened in original packaging storage time is minimum 1 year after shipment<br />
(under recommended storage conditions).<br />
Store in a cool and dry place<br />
Further Articles<br />
Rolls<br />
Art. Number Width<br />
(mm)<br />
21390.200.36100 610 30<br />
21390.200.39200 914 30<br />
Length<br />
(m)<br />
Folex AG, Bahnhofstrasse 92, CH-6423 Seewen-Schwyz, Tel. +41 41 819 39 39, Fax +41 41 810 01 35<br />
www.folex.com, marketing@folex.ch<br />
29.11.2010 Update PDF Show online
21390.200.30700 1067 30<br />
21390.200.32200 1270 30<br />
Folex AG, Bahnhofstrasse 92, CH-6423 Seewen-Schwyz, Tel. +41 41 819 39 39, Fax +41 41 810 01 35<br />
www.folex.com, marketing@folex.ch<br />
29.11.2010 Update PDF Show online