Materials Science & Engineering - Trans Tech Publications Inc.

Materials Science & 

Engineering 

2010 CATALOGUE 

Trans Tech Publications Limited 

www.ttp.net

Materials Science & Engineering 2010 

Contents 

Materials Science .................................. 2 

Forthcoming titles ..................................2 

Latest Titles (published between 2007- 2009) ................. 3 

Current Titles (all titles alphabetically listed) ........ 38 

Online Journal Information ...... 1 and 51 

Ordering Information/Order Form .. 52 

Most titles are now also available on CD 

NEW 

denotes titles published in 2009 onwards 

Trans Tech 

Online Journals 

http://www.scientific.net is one of the largest and fastest 

growing (over 40,000 new pages added in 2009) websites 

devoted entirely to the area of Materials Science and Engineering. 

The site features the following online journals: 

Materials Science Forum (32 volumes per year) 

Key Engineering Materials (30 volumes per year) 

Solid State Phenomena (12 volumes per year) 

Defect and Diffusion Forum (12 volumes per year) 

Journal of Nano Research (6 volumes per year) 

Advanced Materials Research (10-20 volumes per year) 

Journal of Biomimetics, Biomaterials, and Tissue 

Engineering (4 volumes per year) 

http://www.scientific.net 

Forthcoming Titles 

Advanced Design and Manufacture II 

978-0-87849-310-4, 2010 (01/2010) 

900 pages, paperback 

US$298.00/€298.00 

Advances in Fracture and Damage Mechanics VIII 

978-0-87849-315-9, 2010 (01/2010) 


US$300.00/€300.00 

Advances on Hot Extrusion and Simulation 

of Light Alloys 

978-0-87849-302-9, 2010 (01/2010) 


US$140.00/€140.00 

Aluminium Cast House Technology XI 

978-0-87849-316-6, 2010 (01/2010) 

272 pages, hardcover 

US$128.00/€128.00 

Asian Ceramic Science for Electronics III 

and Electroceramics in Japan XII 

978-0-87849-306-7, 2010 (01/2010) 


US$276.00/€276.00 

Ductility of Bulk Nanostructured Materials 

978-0-87849-305-0, 2010 (01/2010) 


US$250.00/€250.00 

Gettering and Defect Engineering in 

Semiconductor Technology XIII 

978-3-908451-74-7, 2010 (01/2010) 


US$266.00/€266.00 

Mechanical Properties of Solids XI 

978-0-87849-303-6, 2010 (01/2010) 


US$100.00/€100.00 

Multiscale, Multifunctional and Functionally 

Graded Materials 

978-0-87849-307-4, 2010 (01/2010) 


US$230.00/€230.00 

For more information please visit: 

http://www.ttp.net/ForthcomingTitles.html 

http://www.ttp.net/NewTitles.html 

2 Trans Tech most Publications titles now also Limited available Fax: on +41 CD 44 for 922 details 1033 visit Email: www.ttp.net ttp@ttp.net

NEW 

Nanocomposite Coatings and 

Nanocomposite Materials 

Ed. A. Öchsner, W. Ahmed and N. Ali 

Materials Science Foundations Vols. 54-55 

978-0-87849-346-3, 2009, 400 pages, paperback 

US$166.00/€120.00 

This exciting new book comprises 9 chapters; each written 

in an easily understandable style by international experts 

and in a format suitable for students (undergraduate or 

post-graduate), technologists and experts seeking to expand 

their knowledge in the area of nanocomposite materials and 

coatings. Although an elementary knowledge of materials 

is assumed throughout, there is a comprehensive introduction 

to each chapter which covers the most important references, 

details of the experimental methods and techniques 

used, and a description of the latest research work. Four 

comprehensive chapters cover the design, synthesis and applications 

of nanocomposite coatings. Past developments in 

nanocomposites were hindered by a lack of available characterisation 

techniques for probing materials at the nanoscale. 

A complete chapter is therefore dedicated to the latest characterisation 

techniques available for investigating nanocomposite 

coatings and nanocomposite materials. Organic/ 

inorganic nanocomposite materials have a vast potential for 

fulfilling many new applications and, by engineering the 

polymers-host interactions, nanocomposites having a broad 

range of properties can be produced. The synthesis and the 

applications of hybrid organic-inorganic nanostructured materials 

are described in a particularly comprehensive chapter. 

Novel routes are being developed in order to synthesise 

three-dimensional nanocomposites. Hence, three chapters 

are devoted to nanowires, reinforced nanocomposites and 

hierarchical nanocomposites. 

NEW 

Precision Die Design 

A.O.Akii Ibhadode 



US$166.00/€120.00 

This book presents a new method for the design of the 

precision dies used in cold-forging, extrusion and drawing 

processes. The method is based upon die expansion, and attempts 

to provide a clear-cut theoretical basis for the selection 

of critical die dimensions for this group of precision 

dies when the tolerance on product diameter (or thickness) 

is specified. It also presents a procedure for selecting the 

minimum-production-cost die from among a set of design 

alternatives. 

It is hoped that the design method, apart from providing solutions 

to simple design problems, will be applied as a first 

approximation to the solution of more complex problems. 

Tool designers, manufacturing engineers and researchers, 

persons studying and teaching the principles of tool design 

in universities and colleges, and those concerned with manufacturing 

in industries will all find this book useful. 

Must have Handbooks 

NEW 

For full table of contents and descriptions of each title visit our web site 

at: http://www.ttp.net 

Advanced Techniques for 

Materials Characterization 

Eds. A. K. Tyagi, Mainak Roy, 

S. K. Kulshreshtha and S. Banerjee 



US$269.00/€195.00 

A major objective of the present work is to provide key 

information that is sufficient to permit the reader to carry 

out independent research using these characterization techniques. 

The concise text not only includes classical Diffraction, 

Spectroscopic and Microscopical techniques but also 

advanced state-of-the-art techniques such as positron annihilation 

spectroscopy (PAS), small-angle neutron scattering 

(SANS), small-angle X-ray scattering (SAXS) and others. 

The work consists of some 20 chapters; each dedicated to 

a particular technique, and in the form of a compilation 

of lectures delivered by dedicated researchers having extensive 

experience in using the particular technique. Each 

well-structured chapter consists of a brief introduction to 

the working principles, ample background references and 

a summary of the potential of the technique; plus its limitations. 

This book will therefore provide the aspiring post-graduate/ 

research student with the flavor of a large number of characterization 

techniques, and researchers who routinely use 

these techniques will now have a comprehensive and handy 

reference guide to important working formulae and practical 

tips. 

NEW 

Semiconductor 

Thermoelectric Generators 

Wolfgang R. Fahrner and Stefan Schwertheim 

Materials Science Foundations Vol. 61 


US$110.00/€80.00 

It is well-known that fossil fuels are being rapidly depleted, 

and that atomic power is rejected by many people. As 

a consequence, there is a strong trend towards alternative 

sources such as wind, photovoltaics, solar heat and biomass. 

Strangely enough, quite another power source is generally 

neglected: namely, the thermoelectric generator (a device 

which converts heat, i.e. thermal energy, directly into electrical 

energy). 

This book is the result of a long teaching and research history 

in the field of semiconductors. On the one hand, it is 

intended to be a help to students specializing in semiconductor 

processing technology. On the other hand, it might also 

be interesting to engineers working in neighbouring fields 

(where thermal management problems may be encountered, 

or where autonomous power supplies (batteryless watches) 

or simply energy-saving devices are required. 

3

Mechanism of High 

Temperatur Corrosion 


a kinetic approach 

Pierre SARRAZIN et al. 



US$152.00/€110.00 

The present work is an excellent summary of the basic principles; 

an understanding of which is of paramount importance 

in understanding the subject. The book begins with 

the basics of thermodynamics, followed by an up-to-date 

summary of experimental methods; many of which have not 

been covered by previous books. The usual supporting topics, 

such as defect structures in compounds, are presented 

with great clarity. The book concludes with numerous casehistories 

which give a good basis for solving practical problems, 

using the principles expounded in the book. 

Advances in Organic 

Light-Emitting Device 

Youngkyoo Kim and Chang-Sik Ha 



US$116.00/€84.00 

This book describes the general principle of device operation, 

recent progress made in materials and device design, 

optimization of device structures, some pertinent processing 

issues, market trends and the future outlook for OLEDrelated 

applications. 

Numerical and Experimental 

Investigation of Hollow Sphere 

Structures in Sandwich Panels 

Thomas Fiedler 



US$110.00/€80.00 

This work addresses the performance of novel metallic 

hollow-sphere structures (MHSS) in sandwich panels. Numerical 

finite-element analyses and experimental tests are 

described. An invaluable source of data on this specialised 

topic. 

Calcium Phosphate Based Bioceramics 

for Bone Tissue Engineering 

Sergey Barinov and Vladimir Komlev 



US$116.00/€84.00 

This book, “Calcium phosphate based bioceramics for bone 

tissue engineering”, presents an up-to-date overview of the 

latest developments made in the field of calcium phosphate 

ceramics, with particular emphasis being placed on the results 

obtained by its authors. 

Lithium Iron Phosphate: A Promising 

Cathode-Active Material for Lithium 

Secondary Batteries 

Gouri Cheruvally 



US$116.00/€84.00 

This monograph provides an overview of the research effort 

already expended on developing lithium iron phosphate as 

a positive electrode material for lithium batteries because 

it has the potential to replace the presently used transition 

metal oxides. The book is written so as to serve the needs 

of researchers in the field as well as those of teachers and 

students of electrochemistry; as a textbook. 

Time-dependent Mechanical 

Properties of Solids 

Wolfgang Gräfe 



US$116.00/€84.00 

This treatment of “Time-Dependent Mechanical Properties 

of Solids” begins with a phenomenological description of 

the transport of some unspecified entity. It is assumed that 

the transport is caused by mechanical stresses or temperature 

fields. This is altogether a groundbreaking essay which 

will repay careful study. 

Maxwell Stresses and 

Dielectric Materials 

Gerhard Kloos 



US$116.00/€84.00 

In a nutshell, the contents are organized as follows: Chapters 

2 to 6 deal with aspects of energy, momentum, symmetry 

and time. In chapter 7, some of the many applications of 

electrostatic Maxwell stresses are addressed in detail. Chapter 

8 discusses the analogy with magnetostatic Maxwell 

stresses, and provides a more general derivation of the relationship 

between the force density and the corresponding 

stress tensor; thus reinforcing the chapter on momentum. 

Nonlinearity of Colloid Systems: 

Oxyhydrate Systems 

Yuri I. Sucharev 



US$166.00/€120.00 

The present monograph is the first systematic study of the 

non-linear characteristic of gel oxy-hydrate systems involving 

d- and f- elements. These are the oxyhydrates of 

rare-earth elements and oxides – hydroxides of d- elements 

(zirconium, niobium, titanium, etc.) 

4 most titles now also available on CD for details visit www.ttp.net

Biomaterials and 

Biomedical Engineering 

Eds. W. Ahmed, N. Ali and A. Oechsner 



US$269.00/€195.00 

The purpose of this book is to present the latest research 

and development carried out in the areas of biomedical engineering, 

biomaterials and nanomaterials science and to 

highlight the applications of such systems. Particular emphasis 

is given to the convergence of nano-scale effects, as 

related to the delivery of enhanced biofunctionality. It is 

intended that this volume should serve as a key reference 

for those who wish to contribute to the global endeavour 

towards improving the clinical outcomes for patients of today 

and tomorrow. 

Physics and Chemistry 

of Rare-Earth Ions Doped Glasses 

Eds. Nandyala S. Hussain et al. 



US$160.00/€120.00 

The aim of this work is to review the latest developments 

in glass science and technology. It presents various types 

of glass, of both academic and technological importance, in 

which the host is doped with rare-earth ions. The contents 

reflect the quality and standards, of recent advances in glass 

research, for the benefit of the whole academic community, 

particularly doctoral researchers, for whom it will act as an 

essential reference guide to glassy materials. 

NEW 

Advances in 

Semiconducting Materials 

Eds. S. Velumani and René Asomoza 

Advanced Materials Research Vol. 68 


US$138.00/€100.00 

Updated knowledge on “Advances in semiconducting materials” 

is of great significance for both fundamental research 

and industrial application. The papers contained in this special 

volume address diverse topics related to recent trends in 

the science of semiconducting materials as related to synthesis, 

characterization, applications, etc. 

The volume will offer readers a good opportunity to review 

state-of-the-art developments in, and future directions of, 

semiconducting materials and technology. 

Latest Titles 

NEW 



Advances in Ceramic Materials 

Ed. Ping Xiao and Brian Ralph 

Materials Science Forum Vol. 606 


US$138.00/€100.00 

This topical book, containing as it does state-of-the-art reviews, 

neatly encompasses the current status of research into 

ceramic materials. 

The topics covered include: Thermal barrier coatings on 

nickel superalloy substrates; Silicon nitride ceramics; Challenges 

to the integration of piezoelectric ceramics into micro-electromechanical 

systems; When should microwaves 

be used to process technical ceramics?; Ceramic and glass 

matrix composites containing carbon nanotubes; Stresses 

in multilayered ceramics subjected to biaxial flexure; Advanced 

nano-scale metrology for the characterization of ceramic 

materials in the scanning electron microscope; Finite 

element calculation of sintering deformation using limited 

experimental data; Microstructural modeling of ferroelectric 

materials: state-of-the-art challenges and opportunities; 

Processing, microstructure and properties of nanograin barium 

titanate ceramics by spark plasma sintering. 

NEW 

Advances in Concrete 

and Structures 

Eds. Jingsi Huo, Yan Xiao, Zongjin Li 

and Shuaib Ahmad 

Key Engineering Materials Vols. 400-402 


US$412.00/€298.00 

The objective of this collection, devoted to Advances in 

Concrete and Structures (ICACS), is to bring together authoritative 

reports, by researchers, engineers, and public 

administrators - located all over the world - on the current 

state of knowledge concerning the latest advances in concrete 

structure use in the field of civil engineering. 

This will be essential reading for all those charged with the 

design or protection of concrete products. 

5

NEW 

Bioceramics 21 


Eds. Marcelo Prado and Cecília Zavaglia 


978-0-87849-353-1, 2009, 758 pages, hardcover 

US$414.00/€300.00 

The book includes a section which is devoted to theoretical 

modelling; an important and new issue which involves several 

fields of knowledge. Following the evolution of regenerative 

medicine, a third generation of bioceramics is represented 

in these Proceedings by the variety of papers on tissue 

engineering, nanotechnology and smart materials. The 

contents are grouped into: I - Bioceramics Certification: In 

Vitro, Pre-Clinical and Clinical Evaluation, II - Bioceramics 

Functionalization: Biomolecule Interactions, III - Biocompatible 

Glasses and Glass-Ceramic Composites, IV - Bioinert 

Ceramics and Tough Ceramics, V - Biomineralization 

and Biomimetics, VI - Bone Grafts and Cements, VII - Coatings, 

Films and Surface Activation on Metals, VIII - Composites 

and Hybrid Materials, IX - Drug Delivery System, 

X - Metal Uptake: Phosphate-Based Materials for Health 

and Environmental Applications, XI - Nanostructured Bioceramics, 

XII - Porous Bioceramics Scaffolds and Tissue 

Engineering, XIII - Theoretical Modelling of Bioceramics. 

NEW 

Artificial Muscle Actuators 

using Electroactive Polymers 

Eds. Pietro VINCENZINI, Yoseph BAR-COHEN and 

Federico CARPI 

Advances in Science and Technology Vol. 61 


US$166.00/€120.00 

The 27 peer-reviewed papers collected here together offer 

a plenitude of up-to-date information on “Artificial Muscle 

Actuators using Electroactive Polymers”. The papers are 

conveniently arranged into the chapters: 1: Materials; 2: 

Analysis, physical mechanisms and characterization; 3: Devices 

and applications. 

Semiconductor Photonics: 

Nano-Structured Materials and Devices 

Eds. S. J. CHUA, J. H. TENG, et al. 



US$166.00/€120.00 

This book consists of a collection of 74 original peer-reviewed 

papers. They cover a wide range of topics in the 

interesting field of nano-structure related semiconductor 

photonics; a field which encompasses quantum dots, quantum 

wire, nano-wire, nano-rods, nano-crystals, photonic 

crystals, ZnO-based materials, III-V compound semiconductors, 

Si photonics and organic optoelectronic devices. 

Nanostructured Materials 

Processed by SPD 

Eds. Xiaozhou Liao and Yonghao Zhao 



US$138.00/€100.00 

The editors invited prominent researchers in this field to 

contribute research and review papers, on the advances 

made in nanostructured materials processing by SPD, to this 

special-topic book. The ten papers cover a wide range of issues 

that are of primordial interest to the SPD research community 

including: mechanical properties, microstructures, 

theoretical aspects of plastic behavior and recent development 

in practical SPD techniques. This book will therefore 

be essential reading for those having an interest in studying 

or using the SPD method. 

Metastable and 

Nanostructured Materials III 

Ed. Dílson S. dos Santos 



US$135.00/€99.00 

This collection comprises 25 peer-reviewed contributions 

providing up-to-date knowledge in the field of “Metastable 

and Nanostructured Materials”. 

Smart Materials 

Ed. Tawee Tunkasiri 

Advanced Materials Research Vols. 55-57 


US$411.00/€298.00 

The main topics covered are: devices, processing, applications, 

modeling and characterization of a wide range of materials 

including piezoelectric ceramics/polymers, magnetostrictive 

materials, smart structural materials and composites, 

electro-optics and other photonic systems, carbon and 

other nanotubes, new nano and micromaterials, biomedical 

materials, sensors and divers smart materials. 


Innovation in Materials Science 

Eds. J. A. Sekhar and J. P. Dismukes 

Key Engineering Materials Vol. 380 


US$180.00/€130.00 

Ppresented are key aspects of the fundamentals of the entire 

invention/innovation process; beginning with an article 

which describes the linkages between Mathematics and 

Invention in the previous and current centuries. This is 

followed by papers on Innovations in Energy Conversion 

Materials, Electronics, Jet Engines, Ophthalmological Materials, 

Glass, Wood, Aluminum and Steel. 

Advanced Materials Forum IV 

Eds. António Torres Marqueset al. 

Materials Science Forum Vols. 587-588 


US$434.00/€314.00 

The volume covers a wide range of Materials and Applications, 

and presents up-to-date information on the challenges 

to materials, as well as making a contribution to the better 

understanding of materials behaviour and characterization. 

Advances in Nanomaterials 

and Processing 

Eds. Byung Tae Ahn, Hyeongtag Jeon et al. 

Solid State Phenomena Vols. 124-126 


US$646.00/€468.00 

This extensive collection of over 460 papers presents new 

results focussing on advanced nanomaterials and their processing. 

Nanomaterials by 

Severe Plastic Deformation IV 

Eds. Yuri Estrin and Hans Jürgen Maier 



US$434.00/€314.00 

This special collection comprises 175 peer-reviewed articles 

on “Nanomaterials by Severe Plastic Deformation”. 

This large number of papers is a convincing demonstration 

of the relevance of bulk ultrafine grained and nanostructured 

materials, produced by severe plastic deformation, to a wide 

range of researchers and engineers. The fact that the authors 

hail from 27 countries also reflects the truly world-wide activity 

in this field. 

Significant progress has been made in this field; including 

all aspects of NanoSPD, such as an increased understanding 

of the mechanisms underlying grain refinement by severe 

plastic deformation, characterisation of the properties 

of SPD-processed materials, improvements in processing 

techniques, and their application. All of these aspects are 

reflected by the contents of this book. 

Latest Titles 

NEW 



Biomedical Applications of 


Eds. Pietro VINCENZINI and Danilo DE ROSSI 



US$166.00/€120.00 

A collection of 42 peer-reviewed papers which, together, 

represent an authoritative survey of “Biomedical Applications 

of Smart Materials”. The papers are grouped under 

the headings: chapter 1: Advances in smart materials synthesis 

and functionality; chapter 2: Enabling tools; chapter 

3: Medical diagnostic applications; chapter 4: Regenerative 

medicine and tissue engineering; chapter 5: New therapeutics 

and intelligent delivery systems; chapter 6: Mini / micro 

implantable devices; chapter 7: Medical applications of 

shape memory materials and smart textiles. 

NEW 


Ed. Erich Kny 

Solid State Phenomena Vol. 151 


US$207.00/€150.00 

Nanocomposite materials constitute a rapidly evolving field 

of science and technology, of which the first applications 

are already on the market and many more are expected to 

follow. The admixture of relatively low amounts of nanoparticles 

(these are, by definition, any morphology having at 

least one dimension in the nano-range, i.e. particles, fibres, 

plates) within a matrix of polymer, ceramic or metal has a 

dramatic increasing effect upon the resultant properties (volume, 

surface and functional properties). Unusual property 

combinations can be obtained; resulting in a new class of 

materials for almost every application. 

This special volume provides an overview of various aspects 

of nanoparticle composites and thus intensify the networking 

and cross-fertilization of ideas between geographically 

distant groups working on nano-reinforced polymers, 

ceramics and metals. 

7

NEW 


Nanomaterials and Devices: 

Processing and Applications 

Eds. S.Ray, S.K.Nath, A.Kumar, R.C.Agarwala, 

V.Agarwala, G.P.Chaudhari, B.S.S.Daniel 



US$200.00/€145.00 

The focus of this special collection was the applied aspects 

of nano-materials; with almost all of the papers presented 

discussing experimental research. 

The papers cover the topics of: Electrical transport in nanomaterials, 

Optical properties of nano-materials, Magnetic 

properties of nano-oxide/metallic powders and thin films, 

Nano-materials with dielectric and ferroelectric properties, 

Severe plastic deformation to achieve ultra-fine grains, 

Nano-materials for energy storage applications, Bulk nanocrystalline 

materials from amorphous ones, Thermal treatment 

of nano-scale materials, Intermetallic nano-materials 

by mechanical alloying, Corrosion behaviour of nano-materials, 

Single- and double-walled carbon nano-tubes, Nanocomposites, 

Quantum dots, Nano-devices and sensors and 

Biocompatible and biodegradable nano-materials. 

NEW 

Smart Optics 

Eds. Pietro VINCENZINI 

and Giancarlo RIGHINI 



US$166.00/€120.00 

This work consists of 33 peer-reviewed papers. Altogether, 

they offer a gamut of timely information on “Smart Optics”. 

The papers are conveniently arranged under the headings: 

chapter 1 - Smart optical materials; chapter 2 - Passive, 

active and adaptive optical devices & systems; chapter 3 - 

Ongoing applications and perspectives. This special volume 

has also been published online in the series, “Advances in 

Science and Technology” Vol. 55. 

Engineering Materials III 

Eds. Yung-Jen Lin and Wen-Cheng J. Wei 



US$135.00/€98.00 

This issue comprises a collection of 20 selected peer-reviewed 

papers covering topics in three major areas: iron 

and steel, non-ferrous alloys, and ceramics and composites. 

The work constitutes and handy and succinct guide to the 

subject matter. 

Advances in Fracture and 

Damage Mechanics VII 

Eds. H.S. Lee, I.S. Yoon and M.H. Aliabadi 



US$412.00/€298.00 

This volume is made up of contributions from researchers 

in 22 countries. It aims to promote exchange of the latest 

experimental and theoretical results on structural integrity, 

durability and failure analysis; with the emphasis on fracture 

and damage mechanics. 

Ferromagnetic Shape Memory Alloys 

Eds. P.K.Mukhopadhyay and S.R.Barman 



US$152.00/€110.00 

This compilation comprises peer-reviewed papers, categorized 

into: I. Sample Preparation, II Thermal Treatments and 

Phase Stability, III. Magnetic and Structural characterization, 

IV. Microscopic studies of Magnetic Shape Memory 

Alloys, V. Effects of External Fields, VI. Coupled Effects: 

Magnetoresistance and Magnetocaloric effects. 

Advanced Structural and Functional 

Materials for Protection 

Eds. William Lau, Shang Huai Min et al. 



US$152.00/€110.00 

This very special volume on ‘Advanced Structural and 

Functional Materials for Protection’ focuses on the choice 

of materials intended for the specific task of protecting civilians 

and soldiers against the effects of blast, fragmentation 

weapons and unconventional attacks, and also covers 

multi-functional materials intended for the enhancement of 

soldier performance. Protective materials represent one of 

the greatest challenges to synthesis and processing; due to 

the extreme requirements of the application. 

An understanding of the various mechanisms & sciences 

behind the behavior of materials will make an invaluable 

contribution to the development of materials for protective 

purposes in these uncertain times. 


Glass – The Challenge for 

the 21st Century 

Eds. M. Liška, D. Galusek et al. 



US$318.00/€230.00 

The book covers various aspects of glass science and glass 

technology, mutual interactions between glass science and 

glass technology, and their influence upon the glass industry. 

Special attention is paid to new challenges to glass in the 

21st century. The contributions deal with topics related to 

understanding and predicting the chemistry and technology 

of processing, fabrication, structure, properties and history 

of glass. 

Progress in Fracture and 

Damage Mechanics 

Eds. B.G. Falzon and M.H. Aliabadi 



US$135.00/€98.00 

This special-topic volume reports on new progress made in 

the analysis and understanding of fracture and damage mechanics. 

The Finite Element Method is a well-established 

analytical tool for theoretical fracture analysis. The development 

of interface elements which combine aspects of both 

fracture and damage mechanics has permitted the prediction 

of both crack initiation and propagation. A number of the 

papers presented here deal with their use and further development. 

These three aspects, taken together, ensure that 

even the expert will learn something new from this book. 

Advances in Shape 

Memory Materials 

Ed. V.A. Chernenko 



US$230.00/€167.00 

This specialist book, the first of its kind, includes original 

and review articles which describe magnetic shape-memory 

alloys and the magnetic shape-memory effect. 

These topics are currently the object of world-wide research 

and development. In particular, the authors in the present 

book concentrated upon describing the phenomenological 

and microscopic mechanisms of the magnetic shape-memory 

effect, on the physical basis of the advanced properties 

of magnetic shape-memory alloys and on the structural aspects 

of martensitic transformations in both ferromagnetic 

and non-ferromagnetic shape-memory alloys. Several chapters 

are devoted to more general issues such as damping, 

the newly-discovered glassy martensite and modeling. The 

reader will also find copious information on technical applications 

and actuators which utilize shape-memory alloys 

with due consideration given to the relevant design principles 

and the analysis of simulation results. 

Latest Titles 

NEW 

NEW 



Smart Materials for Smart 

Devices and Structures 

Eds. Marcin Leonowicz and Dariusz Oleszak 



US$166.00/€120.00 

Smart Materials are ones that can respond to environmental 

stimuli by exhibiting changes in properties (mechanical or 

physical), structure, composition or function. This volume 

highlights advances in the development of smart materials, 

with particular attention being paid to numerical modelling, 

fabrication methods, technologies, properties, sensing and 

processing capabilities. 

The coverage of these new capabilities, remarkable performance 

enhancement or cost reduction, new ideas and 

directions for future development will make the book essential 

reading for those working in materials engineering, 

mechanical engineering, theoretical and applied mechanics, 

electronics, electromechanics and manufacturing. 

Smart Materials & 

Micro/Nanosystems 

Eds. Pietro VINCENZINI and Giuseppe D'ARRIGO 



US$304.00/€220.00 

This collection comprises 77 papers which, together, offer 

a wealth of up-to-date information on “Smart Materials & 

Micro/Nanosystems”. They are grouped under the rubrics: 

chapter 1 - Ferroelectrics, piezoelectrics, electrostrictive and 

magnetostrictive materials; chapter 2 - Stimuli responsive 

polymers and gels; chapter 3 - Shape memory polymers & 

magnetorheological fluids; chapter 4 - Smart multifunctional 

materials and composites; chapter 5 - Hybrid active 

materials systems; chapter 6 - Smart nanocomposites and 

nanomaterials; chapter 7 - Mems / nems; chapter 8 - Recent 

developments in electrical writable organic memory 

devices. 

9

NEW 


Thin Films and Porous Materials 

Ed. N.Gabouze 



US$230.00/€167.00 

The main goal of the volume is to report the most recent 

scientific findings, and to highlight current challenges and 

opportunities in the promising field of porous materials 

and thin films. The volume covers: Advances in Deposition 

Techniques; Characterization of Thin Films; Functionalization 

and Surface Modification; Magnetic Thin Films and 

Multilayers; Nanotechnology and Nanostructured Materials; 

New approaches in Thin Films; Organic Thin Films 

(polymers, biomolecules, alkyl…); Porous Materials and 

Applications; Physics and Chemistry of Thin Films and 

Interfaces; Single and Multilayer-based devices (Sensors, 

Photovoltaic, Optoelectronic); Growth Techniques and 

Application to Thin Films; Thin Films and photonics applications; 

Thin-Film Related Environmental Devices; New 

Materials: Modelling and Simulation. 

The in-depth coverage will make this volume almost a handbook 

guide to the subject. 

NEW 

Advanced Materials Science 

and Technology 

Ed. Jian Lu 



US$207.00/€150.00 

This special collection of 44 peer-reviewed papers has, as 

its main focus, advanced materials science and technology, 

with the emphasis on nanostructured materials and nanostructures. 

The papers cover topics such as aerospace materials, 

biomaterials, magnetic materials, materials evaluation 

technology, materials processing, mechanical behaviour of 

materials, nanomaterials, polymer/composite materials and 

construction materials. 

The book will certainly interest anyone working with advanced 

materials. 

Nanocomposites and 

Nanoporous Materials VIII 

Ed. Chang Kyu Rhee 



US$135.00/€98.00 

This collection comprises 35 peer-reviewed papers. The 

strong international participation and the high quality of the 

presentations is a sure indication of the interest shown in 

the fields of nanocomposites, nano-catalysts, ultrafine polymers, 

nano-adsorption, nano-characterization etc., as they 

affect fundamental research and applied engineering. 

Stress evaluation in materials by neutron 

or synchrotron radiation 

Eds. A. R. Pyzalla, A. Borbély and H.-P. Degischer 



US$276.00/€200.00 

This collection addresses specific topics within the field of 

stress measurement in solids using neutrons, X-rays and 

synchrotron radiation. Particular attention is paid to multidisciplinary 

approaches involving an understanding of the 

measured stress field and the implications of the stress field 

for the behaviour of materials and components. 

Advances in Machining 

& Manufacturing 

Technology IX 

Eds. Yingxue Yao, Xipeng Xu and Dunwen Zuo 



US$366.00/€265.00 

This collection comprises 144 papers which were carefully 

selected from the over 300 papers submitted for the purposes 

of this special volume. All of the papers were subjected to 

peer-review by at least two expert referees. 

Diffusion in Solids and Liquids III 

Eds. Andreas Öchsner and Graeme E. Murch 

Defect and Diffusion Forum Vols. 273-276 


US$435.00/€315.00 

The goal of the special volumes was to provide a unique 

opportunity for exchanging information and presenting the 

latest results, as well as reviewing relevant issues in contemporary 

diffusion research. The volume includes a special 

chapter (by J.Delgado) on Heat and Mass Transfer in Porous 

Media. More than 140 papers, presented by scientists and 

researchers from more than 25 countries, are included in 

this special volume. This large number of papers reflects the 

considerable academic and industrial interest in this topic. 


Corrosion in the Military II 

Eds. Vinod Agarwala, Francesco Bellucci 



US$246.00/€178.00 

The collection is divided into: Section I: Coatings / Corrosion 

Inhibitors; Section II: Corrosion Prevention Control; 

Section III: Monitoring and Diagnostics; Section IV: Management 

and Data Analysis; Section V: Corrosion Mechanism 

/ MIC; Section VI: Stress Induced Cracking; Section 

VII: Metal Joining Concepts. 

Rapid Thermal Processing and beyond: 

Applications in Semiconductor Processing 

Eds. W. Lerch and J. Niess 



US$273.00/€198.00 

This special-topic book, “Rapid Thermal Processing and 

Beyond: - Applications in Semiconductor Processing” focuses 

on various aspects of Rapid Thermal and Millisecond 

Annealing and is arranged so as to follow the major processing 

steps involved in high-performance transistor fabrication, 

without claiming to be a complete catalogue of all of 

the Rapid Thermal Processing (RTP) steps currently in use. 

NEW 

Advances in 

Electronic Materials 

Eds. Erich Kasper, Hans-Joachim Müssig 

and Hermann G Grimmeiss 



US$166.00/€120.00 

This special-topic volume, Advances in Electronic Materials, 

covers various fields of materials research such as silicon, 

silicon-germanium hetero-structures, high-k materials, 

III-V semiconductor alloys and organic materials, as well as 

nano-structures for spintronics and photovoltaics. It begins 

with a brief summary of the formative years of microelectronics; 

now the keystone of information technology. The 

latter remains one of the most important global technologies. 

Although electronic materials are primarily associated 

with computers, the internet and mobile telephones, they are 

used in many other applications which improve our overall 

quality of life. The progress made in traditional scientific 

fields now often depends upon new developments in electronic 

materials. 

This work is therefore an incomparably thorough review of 

the subject. 

Latest Titles 

NEW 



Advanced Synthesis and 

Processing Technology 

for Materials 

Eds. Takashi Goto, Yibing Cheng, Zhengyi Fu 

and Lianmeng Zhang 



US$200.00/€145.00 

This special collection of 73 papers covers the intriguing 

topic of the synthesis and processing of inorganic materials 

using non-traditional technologies such as SHS, SPS, 

mechanical alloying, wet chemistry and aerosol deposition; 

as well as techniques involving laser, microwave, plasma, 

electron beam and high-field magnetron exposure. 

The chapters cover: Ceramics, Low-Dimensional Materials 

and Materials with Designed Structure and provides an authoritative 

and useful introduction to the subject. 

NEW 

Advances in Materials and 

Systems Technologies II 

Eds. A.O. Akii Ibhadode, I.A. Igbafe and B.U. Anyata 



US$386.00/€280.00 

This work comprises a selection of 109, peer-reviewed papers 

on Engineering Research and Development: Innovations. 

It addresses a number of the scientific issues underlying 

innovations in Materials and Systems research at the 

global level, while paying particular attention to possible 

processes that may permit the realization of the Millennium 

Development Goals (MDGs) of the United Nations in Developing 

Countries. The papers are grouped into chapters 

on: Construction and Structures; Electrical and Electronic 

Technology; Food and Agricultural Technology; Manufacturing 

Systems; Materials Processing; Oil and Gas; Renewable 

Energy; Systems Design and Analysis; Tools, Machines 

and Equipment; Waste Technology; and Water Engineering. 

It will therefore be of great interest and value to those working 

on environmental issues and infrastructure-planning. 

11

NEW 


Advances in Abrasive 

Technology XI 

Eds. Tsunemoto Kuriyagawa, Libo Zhou et al. 



US$276.00/€200.00 

This volume comprises a collection of 88 selected papers, 

contributed by experts from all over the world and subjected 

to rigorous peer-review and revision in order to 

ensure originality and quality. The topics covered include 

new developments and applications in grinding, polishing, 

CMP, silicon-wafer processing and field-assisted abrasive 

machining technologies, plus novel techniques and new insights 

into dressing and truing for grinding processes and, in 

addition, abrasive-jet processing. It also covers further topics 

which are relevant to precision manufacturing: including 

the nano-processing of brittle materials, precision measurements 

and evaluation of high-precision components, microfabrication, 

and advanced machining technologies such as 

ecological and high-speed machining. 

NEW 

Advances in Abrasive 

Technology XII 

Eds. Han Huang, Liangchi Zhang et al. 

Advanced Materials Research Vol. 76-78 


US$366.00/€265.00 

This special issue brings together the latest advances in, and 

applications of, abrasive technologies. It comprises 122 selected 

peer-reviewed technical and review articles, and covers 

a broad range of research topics including: design, fabrication, 

truing and dressing of grinding wheels, precision 

grinding, abrasive-jet processing, lapping, honing, polishing 

and non-conventional finishing, semiconductor processing, 

micro/nano- machining, fabrication and forming, advanced 

machining and rock-cutting technologies, tribology in manufacturing, 

process monitoring and measurement, and other 

novel techniques and advanced studies related to abrasive 

technologies. It will therefore be an especial asset to all 

those who study or use abrasives. 

Advances in Fracture 

and Materials Behavior 

Eds. Wei Yang, Mamtimin Geni et al. 

Advanced Materials Research 33-37 


US$540.00/€391.00 

This work on the fracture, fatigue and strength of materials 

comprises 238 peer-reviewed papers covering new 

ideas and up-to-date results. It is anticipated that this special 

volume will stimulate and enhance progress in fracture 

mechanics, materials behavior and computational science 

research, as well as advancing fundamental understanding 

in these fields. A truly comprehensive guide to the subject 

Measurement Technology 

and Intelligent Instruments VIII 

Eds. Wei Gao, Yasuhiro Takaya et al. 



US$304.00/€220.00 

The 163 peer-reviewed papers in this book include contributions 

from all over the world, including Australia, Austria, 

China, Croatia, Egypt, France, Germany, Hungary, Japan, 

Mexico, Poland, the Republic of Korea, Russia, Singapore, 

Spain, Taiwan, Turkey, the UK, the USA and Vietnam. This 

work certainly presents the most up-to-date information on 

the use of measurement technology and intelligent instrumentation 

in areas ranging from basic research to industrial 

manufacture. 

Materials Science, Testing 

and Informatics IV 

Eds. P.J. Szabó, T. Réti, T. Czigány 



US$276.00/€200.00 

This collection comprises state-of-the-art papers written by 

scientists and research groups working in fields encompassing 

metals and alloys, silicates, polymers and composites. 

Materials and Product Technologies 

Eds. Z.Y. Shen, M.N. James, W.D. Li et al. 



US$411.00/€298.00 

This collection comprises 130 selected peer-reviewed papers 

which address a number of scientific issues underlying 

the increased global attention paid to mechanical product 

performance and reliability. The topics covered include 

materials-related product development and reliability technologies, 

variability in materials properties, scale-induced 

changes in properties, failure analysis, design analysis, manufacturing 

and machining technologies, numerical modelling 

and product innovation. 


NEW 

Advances in Grinding and 

Abrasive Technology XV 

Eds. Bo Zhao, Xipeng Xu, Guangqi Cai 

and Renke Kang 

Key Engineering Materials Vols. 416 


US$276.00/€200.00 

This work presents the reader with the most recent advances 

in the field of abrasive technology: including the mechanics 

and control of abrasive processes, modeling, simulation and 

optimization of abrasive processes, green and clean production 

in abrasive processes, measurement and surface-quality 

assessment, cooling and coolants, polishing, wheel-truing 

and dressing, novel abrasive techniques, and novel machining 

techniques. 

It will therefore be valuable to production and research engineers, 

research students and academics working in the field. 

Advances in Understanding the Fatigue 

Behavior of Materials 

Ed. T.S. Srivatsan 

Key Engineering Materials Vol. 378-79 


US$273.00/€198.00 

The issue is divided into four sections. Section I consists 

of a collection of papers which focuses on ferrous alloys. 

Section II consists of papers with the focus on non-ferrous 

alloys. Section III concentrates on shape-memory alloys 

and bulk metallic glasses. Finally, Section IV considers 

alternative approaches to the study and understanding of fatigue 

behavior as it relates to materials and structures. 

This work could well serve as an advanced guide to researchers 

involved in the study, understanding and documentation 

of the fatigue behavior of materials. 

Progress in Surface Treatment 

Eds. Nahed El Mahallawy and Mingxing Zhang 



US$248.00/€180.00 

The purpose of this special volume on surface engineering 

is to provide an overview of the most popular modern 

surface-treatment technologies for structural materials, and 

thus enable materials scientists and engineers to select suitable 

techniques for their research and manufacturing needs. 

It comprises reports of cutting-edge research results and 

reviews of the most recent developments in the use of a 

particular technique. The topics covered include thin-film 

coating, laser surface technologies, surface nanotechnologies, 

anodizing, electroplating, electroless plating, thermal 

spraying and cold spraying. 

Latest Titles 

NEW 



Progress in Abrasive and 

Grinding Technology 

Ed. Xipeng Xu 



US$166.00/€120.00 

In order to highlight the recent progress made in this field, 

the editor invited 21 world-wide contributions with the aim 

of gathering together all of the achievements of leading researchers 

into a single publication. 

The authors of the 21 invited papers, of both review and research 

type, therefore hail from Australia, China, Germany, 

Japan, Singapore, Taiwan (China), UK and the USA. 

The abrasive processes covered by this volume include not 

only grinding and polishing, but also wire-sawing and abrasive 

water-jet machining. The topics covered address both 

fundamental aspects and novel techniques. It is therefore 

certain that this volume will be invaluable to production and 

research engineers, research students and academics working 

in this area. 

NEW 

Progress of 

Machining Technology 

With Some Topics in Advanced 

Manufacturing Technology 

Eds. Fan Rui, Chen Huawei et al. 



US$366.00/€265.00 

This special volume focuses on the current progress and 

trends in machining technologies. The objective was to harness 

and exchange experience, knowledge, new ideas and 

information concerning the latest developments in research 

pertaining to a wide range of subjects such as machining 

of novel, difficult-to-cut and free-machining materials, new 

tool materials and new abrasive tools, precision, micro and 

nano-machining, abrasive machining, high-speed machining, 

unconventional machining, new machine tools and tooling 

technology, and monitoring of the machining process. 

13

NEW 


Progress in Sol-Gel Production 

Ed. Luis Esquivias 



US$138.00/€100.00 

This book presents contributions covering the more recent 

applications of Sol-Gel science. Ceramics and films produced 

from gels were among the first applications developed 

by early sol-gel researchers. The possibility of tailoring 

the structure, and controlling particle growth, has permitted 

ever more advanced materials to be obtained. Several 

other potential applications were foreseen fifteen to twenty 

year ago, but their realization became possible only after extensive 

research on precursors had enabled progress towards 

the preparation of new pre-forms. 

Many aspects are covered in fascinating detail by this very 

needed contribution to the field. 

NEW 

Progress in High 

Temperature Ceramics 

Eds. Yashwant Mahajan & J. A. Sekhar 



US$180.00/€130.00 

Advanced high-temperature materials are key players in the 

emerging new technologies which are pushing forward the 

structural-aerospace, propulsion-system, defense, nuclear, 

thermal and chemical industries. In this special volume, an 

attempt has been made to present a large number of the more 

well-known ultra high-temperature ceramics, refractory borides 

and oxides; together with their composites, plus intermetallics 

and CMCs. The collection provides a pot-pourri 

of invaluable acquired experience, as well as a comprehensive 

portfolio of state-of-the-art processing techniques; all 

written by experts in their respective fields. Synthesis, processing 

and microstructure-property interrelationships are 

comprehensively explored for each of the systems chosen. 

Perspectives of nanoscience 

and nanotechnology 

Eds. Witold Łojkowski and John R. Blizzard 



US$189.00/€137.00 

The contents are divided into: Nanostructures for Photonics, 

Oxide Nanostructures, Carbon Nanostructures, Nanostructures 

for Medicine, Bulk Metal Nanostructures, and constitute 

a useful guide to these topics. 

Surface Engineering 

Eds. M.K. Lei, X.P. Zhu et al. 



US$381.00/€276.00 

This collection of 201 peer-reviewed papers is grouped into 

seven sections: I. Thermal Spray Technology, II. Vapor Deposition 

Technologies, III. Electrodeposition and Electroless 

Deposition, IV. Energetic Beams and Plasma Surface 

Treatments, V. Wear and Corrosion Behavior of Engineering 

Surfaces, VI. Functional Films and Coatings and VII. Surface 

Machining and Mechanical Processing Technologies. 

This work therefore offers valuable insights into the scientific 

& technological achievements already made in this field 

and into the important progress still being made. 

High Temperature Corrosion and 

Protection of Materials 7 

Eds. Pierre Steinmetz et al. 



US$440.00/€319.00 

The book is divided into the topics: I. Materials and Coatings 

for Gas Turbines, II. Power Boilers and Incinerators; 

H2 Syngas and Biofuel Production, III. HT Materials for 

Nuclear Processes, IV. HT Corrosion in the Processing Industries, 

V. HT Corrosion of Functional Materials and Coatings, 

VI. Fundamentals, 

Advances in Light Emitting Materials 

Eds. B. Monemar, M. Kittler, H. Grimmeiss 



US$230.00/€167.00 

This special-topic volume‚ Advances in Light-Emitting 

Materials’, makes an important contribution to the field of 

silicon and III-nitride semiconductors. It begins with a brief 

history of visible-light emitting diodes. Altogether, this volume 

presents an in-depth review of this important topic. 


NEW 

Advances in Materials 

Manufacturing Science and 

Technology XIII/I 

Advanced Manufacturing Technology, Equipment and 

Manufacturing Systems & Automation 

Eds. Dongming Guo, Jun Wang et al. 



US$366.00/€265.00 

This special volume comprises a collection of 139 papers 

chosen, from among 510 submissions from universities and 

industries all over the world, on the basis of their quality 

and relevance to the central topic. All of the papers were 

peer-reviewed by selected experts and mirror the latest developments 

in the field of materials manufacturing technology; 

ranging from the fundamentals, to new technologies 

and applications. The papers specifically cover the topics 

of advanced manufacturing technology and equipment, and 

manufacturing systems and automation. 

This book therefore constitutes a valuable reference work 

for all researchers, in the field of materials manufacturing 

science and technology. 

NEW 


Manufacturing Science and 

Technology XIII/II 

Modern Design Theory and Methodology, MEMS & 

Nanotechnology, Material Science & Technology in 

Manufacturing 

Eds. Dongming Guo, Jun Wang et al. 



US$366.00/€265.00 

This volume consists of a collection of 125 peer-reviewed 

papers submitted by universities and industrial laboratories 

all over the world. The papers reflect the very latest developments 

in the field of materials manufacturing technology, 

ranging from fundamental principles to new technologies 

and applications. In particular, the papers cover the topics 

of modern design theory and methodology, MEMS and 

nanotechnology, and materials science and technology in 

manufacturing. 

Multi-functional Materials and Structures 

Eds. Alan K.T. Lau, J. Lu et al. 



US$473.00/€343.00 

The present 376 papers are the cream of 650 submitted abstracts, 

selected after rigorous review, and focus mainly on 

the front-line research work done by the various authors. 

They therefore represent the best current guide to the ‘stateof-play’ 

in this field. 

Latest Titles 

NEW 




Science of Wood 

Ed. Pentti O. Kettunen 



US$138.00/€100.00 

The present collection of papers describes some of the advances 

made in the study of the micro- and nano-structures 

comprising the xylemic portion of the tree trunk, their relationship 

to deformation and other mechanical properties, 

plus the mechanical and chemical properties as seen at a 

more macroscopic scale. As the papers concentrate on very 

specific and limited areas of knowledge, the necessary background 

information concerning the topics covered by the papers 

is also provided in order to assist those readers who are 

familiar with them. 

As a result, this volume presents a unique introduction to 

the understanding and application of constructional wood 

products. 

NEW 

Advances in Strength 

of Materials 

Ed. Liviu MARSAVINA 



US$180.00/€130.00 

This collection is the result of bringing together scientists 

from various countries in order to combine their knowledge 

concerning the latest analytical, experimental and numerical 

developments in the fields of Strength of Materials, Fracture 

Mechanics and Fatigue. 

The contributions are divided into: Metallic Materials, 

Composite Materials, Construction and Building Materials 

and Bio–Materials. 

The work therefore constitutes an authoritative and up-todate 

guide to these subject-areas. 

15

NEW 


Biohydrometallurgy 2009 

a meeting point between Microbial 

Ecology, Metal Recovery Processes and 

Environmental Remediation 

Eds. Edgardo R. Donati, Marisa R. Viera et al. 



US$272.00/€197.00 

The main focus of this collection of peer-reviewed articles 

is three different aspects of biohydrometallurgy: this is the 

field of microbial ecology which is the key to answering 

central questions concerning not only the diversity and 

behavior of micro-organisms in commercial operations, 

but also possible applications in biohydrometallurgy of extremophiles 

coming from very different environments. This 

covers metal recovery bioprocesses, including basic and 

applied studies of bioleaching and bio-oxidation; but also 

bioflotation. A large part of the book is given over to interfacial 

studies which contribute to the understanding of the 

interaction between surfaces and micro-organisms during 

those processes. Also covered are the remediation of mining 

activities and environmental protection as related to mining 

and mining industries. 

NEW 

Damage Assessment 

of Structures VIII 

Eds. F. Chu, H. Ouyang, V. Silberschmidt et al. 



US$370.00/€268.00 

The primary aim of this volume was to gather together the 

current knowledge and expertise of scientists and engineers 

working, in both academia and industry, on damage 

assessment, structural health monitoring (SHM) and nondestructive 

evaluation (NDE). The themes of the book reflect 

current interests existing in the wider field of damage 

assessment. It is interesting to observe the rise in popularity 

of system diagnostics and prognosis, as reflected by the increasing 

number of papers published in this area. 

Physical and Numerical Simulation of 

Materials Processing 

Eds. Jitai NIU, Zuyan LIU, Cheng JIN 

and Guangtao Zhou 



US$497.00/€360.00 

This specialist work comprises 249 peer-reviewed papers on 

the “Physical and Numerical Simulation of Materials Processing”. 

This collection brings the reader up-to-date with 

recent academic and experimental accomplishments in the 

fields of physical and numerical simulation. 

Advances in 

Experimental Mechanics VI 

Eds. J.M. Dulieu-Barton, J.D. Lord et al. 

Applied Mechanics and Materials Vols. 13-14 


US$232.00/€168.00 

The contents are divided into: Component Analysis 1, 

Composite Structures and Materials, Defect and Damage 

Analysis, Materials Characterization 1, Impact, Materials 

Characterisation 2, Novel Sensor Technology 2, Component 

Analysis 2. 

Flexible Manufacture of Lightweight 

Frame Structures 

Phase II: Integration 

Eds. Klaus Weinert, Jürgen Fleischer et al. 



US$138.00/€100.00 

The increasingly important interplay between technological 

development, simulation of production processes and problems 

of integration are reflected in this interesting collection 

of peer-reviewed articles by leading experts in their fields. 

It outlines key aspects of the theoretical and experimental 

work involved in setting up a processing route. 

Structural Integrity and Failure 

Eds. Xiaozhi Hu, Brent Fillery et al. 



US$276.00/€200.00 

This collection comprises 71 peer-reviewed papers which 

summarise the most recent developments in the fields of 

advanced materials research and structural integrity. The 

papers contained in this special issue include contributions 

from Australia, Canada, China, Europe, Japan, Korea, New 

Zealand and the USA and have been grouped into the categories 

of: (1) Bio- and Nano- Materials, (2) Fracture and 

Fatigue, (3) Ceramics, Concrete and Rock, (4) Composites, 

and (5) Structural Integrity. 


Theory, Modeling and 

Numerical Simulation 

Eds. Veena Tikare, Graeme E. Murch et al. 



US$138.00/€100.00 

The aim of this special collection: “Theory, modeling and 

numerical simulation of multi-physics behavior”, with its 25 

selected and peer-reviewed papers,.is to highlight the theories, 

models and numerical techniques that have permitted 

multi-physics simulations to become an integral part of research 

and development programs. 

NEW 

Complete print set 

of CIMTEC 2008 

Eds. P. Vincenzini et al. 

Advances in Science and Technology Vols. 54-61 


US$966.00/€700.00 

The 8 volumes of the Conference Proceedings bring together 

a wide selection of the papers presented. Volume 

1 - Smart Materials and Micro/Nanosystems (co-edited by 

Giuseppe D’Arrigo), Volume 2 - Smart Optics (co-edited 

by Giancarlo Righini), Volume 3 - Embodying Intelligence 

into Structures and Integrated Systems (co-edited by Fabio 

Casciati), Volume 4 - Biomedical Applications of Smart 

Materials, Nanotechnology and Micro/Nano Engineering 

(co-edited by Danilo De Rossi), Volume 5 - Mining Smartness 

from Nature (co-edited by Salvatore Graziani), Volume 

6 - State-of-the-art Research and Application of SMAs 

Technologies (co-edited by Stefano Besseghini), Volume 7 

- Smart Textiles (co-edited by Rita Paradiso), Volume 8 - Artificial 

Muscle Actuators using Electroactive Polymers (coedited 

by Yoseph Bar-Cohen and Federico Carpi). Overall, 

these volumes represent an incomparable survey of the field. 

NEW 

Deformation Processes of Rigid 

Plastic Materials 

Ed. Sergei Alexandrov 



US$113.00/€98.00 

This special issue presents a series of papers written of a 

group of leading scientists working in the field of the mechanics 

of plastic deformation. 

The collection covers a broad spectrum of topics including: 

pressure-dependent plasticity, elastic-plastic deformation of 

thin plates, metal-forming analysis and design, constitutive 

behavior near to frictional interfaces and new developments 

in the upper-bound method. 

No reader working in this general field can fail to find something 

of interest within. 

Latest Titles 

NEW 



Eco-Materials Processing 

and Design X 

Eds. Hyungsun Kim, JienFeng Yang et al. 



US$366.00/€265.00 

The aim of this special volume is to give an overview of 

the historical background and present status of eco-materials 

processing and design for materials research, and to foresee 

future trends in the field. Serious global and environmental 

problems have led the materials manufacturing industries to 

monitor closely the formation and accumulation of carbon 

dioxide and other deleterious gases in the atmosphere, as 

well to reduce raw materials use and energy consumption 

and limit other factors which reflect the environmental impact 

of the industry. 

This thorough coverage will certainly make the book essential 

reading for all of those who care about conserving the 

world for the benefit of future generations. 

NEW 

Materials Research 

Eco/enviromental materials, energy 

materials, magnesium, aerospace materials and 

biomaterials for medical application 

Eds. Zhongwei Gu, Yafang Han et al. 



US$538.00/€390.00 

This collection of 258 peer-reviewed papers focuses on the 

topics of eco/environmental materials, energy materials, 

magnesium, aerospace materials and biomaterials for medical 

applications. The papers are grouped into chapters on: I. 

Eco/Environmental Materials; II. Sustainable Energy Materials; 

III. Electronic/Packaging Materials; IV. Transportation 

Materials; V. Magnesium; VI. Biomaterials for Medical 

Applications. 

The work offers a timely overview of these topics, and will 

be of great interest to those involved in those fields. 

17

NEW 


Mechatronic Systems 

and Materials II 

Eds. Inga Skiedraite, Jolanta Baskutiene 

and Arunas Lipnickas 

Sold State Phenomena Vol. 144 


US$218.00/€158.00 

This interesting volume is divided into eight sections; each 

of which covers an aspect of the subject-matter: i) Robotics: 

Industrial, Microrobotics, Mobile Robots; ii) Sensors and 

Actuators in Mechatronics; iii) Analysis of Vibration; iv) 

Failure Analysis; v) Measurement Techniques; vi) Materials 

(properties, modeling, manufacturing and processing); vii) 

Education in the Fields of Mechatronic and Materials Science. 

The wide variety of specific problems that is addressed 

reflects the latest achievements and research trends within 

the eight fields covered. 

NEW 

Mechatronic Systems 

and Materials III 

Eds. Zdzislaw Gosiewski and Zbigniew Kulesza 



US$274.00/€198.00 

This very interesting volume is divided into 24 sections; 

each of which covers, in detail, one aspect of the subjectmatter: 

I. Industrial robots; II. Microrobotics; III. Mobile 

robots; IV. Teleoperation, telerobotics, teleoperated semiautonomous 

systems; V. Sensors and actuators in mechatronics; 

VI. Control of mechatronic systems; VII. Analysis 

of vibration and deformation; VIII. Optimization, optimal 

design; IX. Integrated diagnostics; X. Failure analysis; XI. 

Tribology in mechatronic systems; XII. Analysis of signals; 

XIII. Measurement techniques; XIV. Multifunctional and 

smart materials; XV. Metallic alloys; XVI. Biomaterials, 

XVII. Functional composites; XVIII. Adaptive materials; 

XIX. Piezoelectric materials; XXI. Ceramics and glasses; 

XXII. New trends in mechatronic and materials science education; 

XXIV. Teaching materials and laboratory facilities. 

Surface Finishing Technology 

and Surface Engineering 

Eds. Zhaojian Yang, Hang Gao and Zhuji Jin 



US$252.00/€183.00 

The topics covered include: Modelling and simulation of super-finish 

surfacing processes and mechanisms, Advanced 

de-burring techniques and theories, Precision and super-precision 

grinding and finishing techniques for advanced materials, 

Advanced techniques/technologies and fundamental 

studies for enhancing component surface properties and 

characteristics, Super-finish surface topography, integrity 

and characterisation, Advanced abrasives and equipment 

for surface finishing processes. 

Diffusion and Diffusional Phase 

Transformations in Alloys 

Eds. D.Beke, A.Gusak, G.Murch, J.Philibert 

Defect and Diffusion Forum Vol. 277 


US$152.00/€110.00 

These aspects are reflected in the 32 peer-reviewed papers 

which are to be found in this volume under the headings of: 

Diffusion and Reactions, Driven Systems, General Problems 

of Diffusion, and Structural & Phase Transformations. 

Defects and Diffusion in Metals 

Ed. David J. Fisher 



US$135.00/€100.00 

This tenth volume in the series covering the latest results 

in the field includes abstracts of papers which appeared between 

the publication of Annual Retrospective IX (Volume 

265) and the end of May 2008 (journal availability permitting). 

Semi-Solid Processing of Alloys and 

Composites X 

Eds. G. Hirt, A. Rassili, A. Bührig-Polaczek 



US$366.00/€265.00 

This special volume is dedicated to the science and technology 

of the semi-solid processing of metals. Since the 

recognition of the possibility of manipulating metals in the 

semi-solid state, during the seventies, this fascinating technology 

has experienced dynamic development and has led 

to a whole family of new production processes, new equipment 

and industrial applications. 


NEW 

NEMS/MEMS Technology 

and Devices 

Eds. Selin Teo, A. Q. Liu, H. Li and B. Tarik 



US$218.00/€158.00 

This second book on the subject of MEMS covers contemporary 

topics of importance to science, engineering and the 

technology of materials. The emphasis of this book has been 

placed on Nanoelectromechanical Systems (NEMS) /Microelectromechanical 

Systems (MEMS) technology and devices. 

In particular, the associated symposium aimed to cover 

not only applications that involve MEMS design, but also its 

modeling, fabrication processes (e.g. semiconductors, polymers, 

etc.) lab-on-a-chip, and biophotonic medical devices 

(e.g. DNA, protein and cell-sorting, etc). The focus of these 

points of interest were the exploration of new devices, and 

process innovation and engineering application, especially 

as related to NEMS/MEMS technology and devices. 

Overall, this makes for a fascinating survey of the subject. 

NEW 

Mining Smartness from Nature 

Eds. Pietro VINCENZINI et al. 



US$166.00/€120.00 

The 37 peer-reviewed papers making up this collection together 

present a wealth of up-to-date information on, “Mining 

Smartness from Nature”. The papers are grouped into 

the following chapters: 1: Algorithms, mechanisms and 

structures in nature as an inspiration to mimicking; 2: Biomimetic 

materials; 3: Bio-inspired sensors and actuators; 4: 

Biologically inspired systems and robotics; 5: Biomimetic 

flow control in aquatic systems and its application to bioinspired 

autonomous underwater vehicles. 

Latest Titles 



Advanced Welding and Micro Joining / 

Packaging for the 21st Century 

Eds. Changhee Lee et al. 



US$346.00/€251.00 

The aim of this special collection of papers was to review 

and analyze the state-of-the-art concerning the welding and 

joining/packaging technologies which are essential to the 

production of structures ranging from the compact to the 

ultra-large. This extensive collection of 164 peer-reviewed 

papers will provide the reader with an unparalleled guide 

to the most up-to-date knowledge available on this field. 

Phase Transformation 

and Diffusion 

Eds. G. B. Kale, M. Sundararaman et al. 



US$138.00/€100.00 

Apart from a few cases involving crystallographic martensitic 

transformations, all phase transformations are mediated 

by diffusion. Thus, proper control and understanding of the 

process of diffusion during nucleation, growth, oxidation, 

sintering, etc are essential for optimising the properties of 

materials to meet specific needs. This importance of this 

topic is reflected by this special-topic volume on, “Phase 

Transformation and Diffusion”. Researchers and scientists 

from both academia and industry made important contributions 

to the volume, thus making it an excellent introduction 

to, and review of, the subject. 

Advanced Powder 

Technology VI 

Eds. Lucio Salgado and Francisco Ambrozio Filho 



US$273.00/€198.00 

The articles cover the topics of: powder production, ceramics 

processing, properties, powder compaction and sintering, 

injection moulding and mechanical alloying, nanomaterials, 

atmospheres, powder-metallurgy markets, characterization 


Advanced Manufacture 

Focusing on New and Emerging Technologies 

Eds. Sheng-Jye Hwang and Sen-Yung Lee 



US$276.00/€200.00 

The goal of this book was to gather together the latest knowhow 

from experts on issues related to research and technological 

developments in emerging technologies, manufacturing, 

basic science, systems engineering and education. 

19

Advanced Materials 

and Processing IV 

Eds. Deliang Zhang, Kim Pickering et al. 



US$233.00/€169.00 

This special volume comprises 85 refereed papers. The selection 

of the papers was based upon the recommendations 

of the reviewers and the discretion of the editors. In most 

cases, the accepted papers were further polished to improve 

their readability. 

Defects and Diffusion 

in Semiconductors 

Advances on Extrusion Technology and 

Simulation of Light Alloys 

Eds. Luca Tomesani and Lorenzo Donati 



US$177.00/€128.00 

This collection offers a fully representative snapshot of 

modelling activities as applied to processes involving extrusion. 

It covers a wide range of topics, grouped into the 

categories: benchmark, keynotes, material flow and constitutive 

equations, microstructure, seam welds and process 

optimization, dies and tools. 

e-Engineering & Digital 

Enterprise Technology 


An Annual Retrospective X 

Ed. D.J. Fisher 



US$208.00/€150.00 

Eds. Kai Cheng, Yingxue Yao et al. 



US$411.00/€298.00 

This collection includes 181 peer-reviewed papers covering 

topics as varied as: e-commerce engineering, collaborative 

product design & manufacturing, modeling and simulation 

of the workflow of the design and manufacturing process, 

modeling and simulation of materials processing, modeling 

and integration of enterprises, enterprise resource-planning, 

workshop planning and management, knowledge engineering 

applications in digital enterprises, development of 

digitalized products, virtual manufacturing and numerical 

control of equipment. This book will be invaluable to production 

and development engineers, research students and 

academics working in these fields. 

New Trends in Mechanics 

and Transport 

Eds. Tadeusz Uhl and Andrzej Chudzikiewicz 

Applied Mechanics and Materials Vol. 9 


US$135.00/€99.00 

This collection of 13 refereed papers is the result of a unique 

opportunity offered to the scientific and technical communities 

for them to interact and to consolidate the application 

of current achievements in mechanical science as applied 

to transport. It covers topics which include theoretical, numerical 

and experimental studies of transport-related areas. 

All-in-all, it represents a succinct state-of-the-art survey. 

Eco-materials Processing 

and Design IX 

Eds. Byungsei Jun, Hyungsun Kim et al. 



US$253.00/€183.00 

This up-to-date collection, “Eco-Materials Processing and 

Design IX”, covers – on a global scale – the outstanding 

advances made in investigating, producing and using ecomaterials. 

It furnishes materials scientists and end-users 

with a valuable source of information and new concepts 

covering the complete spectrum of ecology, eco-materials, 

nano-materials, bio-materials, recycling, environmental 

protection and energy conversion related materials. 

Interaction between defects and 

anelastic phenomena in solids 

Eds. Igor S. Golovin and Daniil M. Levin 



US$152.00/€110.00 

The principal purpose of assembling this special volume 

was to create a truly international body of peer-reviewed 

contributions on “Interaction between defects and anelastic 

phenomena in solids”. 

Materials Structure & 

Micromechanics of Fracture V 

Ed. Pavel Šandera 



US$273.00/€198.00 

The main goal of these proceedings was to demonstrate the 

use of a variety of multi-scale approaches, ranging from the 

atomistic to the macroscopic level, and in this it succeeds 

admirably. The papers, ordered approximately according to 

the sequence, atomistic-mesoscopic-macroscopic, are presented 

in this fascinating volume. 


Solid Phase Transformations 

Eds. J. Čermák and I. Stloukal 



US$273.00/€198.00 

This special-topic book, devoted to “Solid Phase Transformations” 

, covers a broad range of phenomena which are of 

importance in a number of technological processes. Most 

commercial alloys undergo thermal treatment after casting, 

with the aim of imparting desired compositions and/or optimal 

morphologies to the component phases. The volume 

comprises invited papers designed to contribute to a better 

understanding of the phenomena related to phase compositions 

and phase changes in the solid state. 

NEW 

Fractography of Advanced 

Ceramics III 

Eds. J. Dusza, R. Danzer, R. Morrell and G.D. Quinn 



US$263.00/€190.00 

The aim of this book is to make an important contribution 

to the development of new functional and structural 

ceramic materials, which exhibit enhanced performances 

and improved lifetimes and reliability, by fostering a better 

understanding of the mechanisms of their deterioration 

and failure under various stress conditions at various operating 

temperatures. The work covers the topics of: basic 

failure phenomena; indentation fracture; fracture and fractography 

of structural, electro- and bio-/dental ceramics; 

fracture of fiber-reinforced composites; fracture of porous 

and laminated ceramics; defect-strength and microstructure 

- fracture toughness relationships; damage mechanisms in 

nanoceramics; fracture and fractography of multilayered ceramics 

and coatings; machining cracks and edge-chipping; 

and fracture and fractography of composites and nanocomposites. 

NEW 

Electrochemistry and physical 

chemical methods in serving 

materials for sustainable development 

Ed. Daniela Ionita 



US$125.00/€91.00 

The aim of this special volume is, as the title indicates, to 

point out the great power of electrochemistry and other 

physico-chemical methods (SEM, AFM, chemiluminescence, 

MOCVD, FT-IR, UV-VIS-NIR, X-Ray etc.) in obtaining 

and characterizing advanced materials. 

It is hoped that the work will serve as a tool for advancing 

future studies regarding the applied aspects of the synthesis 

and characterization, processing and application of advanced 

engineering materials. 

Latest Titles 

NEW 



Magnetism and 

Magnetic Materials 

Ed. N. Perov 

Solid State Phenomena Vol. 152-153 


US$304.00/€220.00 

The main emphasis of this special volume is placed on 

new developments in low-dimensional magnetism, magnetic 

semiconductors and oxides, transport phenomena and 

spintronics, magnetophotonics, HF magnetic properties and 

metamaterials, shape memory alloys and magnetocaloric 

effects, magnetic properties of strongly correlated systems 

and superconductivity, medicine and geophysics, and applications. 

Trends in magnetism are also discussed. 

The 140 peer-reviewed papers are grouped into chapters 

on: I. Magnetic Materials; II. Magnetic Oxides; III. Soft 

Magnetic Matter; IV. Nanomagnetism and Nanostructures; 

V. Diluted Magnetic Semiconductors; VI. High Frequency 

Properties, Metamaterials and Resonances; VII. Biomagnetism 

and Miscellaneous; VIII. Magnetism and Superconductivity; 

IX. Magnetocaloric Effect and Shape Memory; X. 

Magnetophotonics; XI. Spintronics and Magnetotransport; 

XII. Theory. 

NEW 

Emboding Intelligence 

in Structures and 

Integrated Systems 

Eds. Pietro VINCENZINI and Fabio CASCIATI 



US$304.00/€220.00 

A collection of 86 peer-reviewed papers offering an up-todate 

overview of the topic of, “Embodying Intelligence in 

Structures and Integrated Systems”. The papers are grouped 

into chapters on: 1: Smart materials, sensors/actuators and 

microsystems; 2: Integration technologies; 3: Smart structures 

and integrated systems; 4: Structural monitoring; 5: 

Ongoing and perspective applications. 

21

NEW 


Diffusion in Materials 

DIMAT2008 

Eds. A. Agüero, J.M. Albella, M.P. Hierro, J. Phillibert 

and F.J. Pérez Trujillo 



US$435.00/€315.00 

This special volume covers the fundamental contributions 

made by diffusion to various areas where its application 

plays a major role in industrial processes. The 764 peerreviewed 

paper are grouped into: Chapter I Diffusion and 

Alloys, Chapter II Diffusion and Coatings, Chapter III Diffusion 

and Electronic Materials, Chapter IV Diffusion and 

Intermetallics, Chapter V Diffusion and Oxidation Processes, 

Chapter VI Diffusion and Oxides, Chapter VII Diffusion 

and Stresses, Chapter VIII Diffusion in Thin Films, Chapter 

IX Diffusion in Glasses and Liquids, Chapter X Diffusion 

in Nanomaterials, Chapter XI Fundamentals in Diffusion. 

This massive collection of authoritative and up-to-date papers 

is an incomparable guide to the present state of the art. 

NEW 

Diffusion in Solids 

and Liquids IV 

Eds. Andreas Öchsner, Graeme E. Murch 

and Ali Shokuhfar 



US$435.00/€315.00 

The goal of this special volume was to provide a unique 

opportunity to exchange information, present the latest results 

and to review relevant issues in contemporary diffusion 

research. The large number (over 111) of peer-reviewed 

papers emphasizes the considerable academic and industrial 

interest in this field. Also included is a special chapter on 

Thermodynamics, Kinetics and Structure of Interfaces and 

Associated Phenomena. 

The book offers much food-for-thought concerning this 

topic. 


Semiconductor Technology XII 

Eds. A. Cavallini, H. Richter, M. Kittler Et al. 



US$367.00/€266.00 

These papers, written by internationally recognized experts 

in the field, review the current state-of-the-art and predict 

future trends in their respective authors’ fields of research. 

Materials and Technologies 

Eds. Ionel Chicinaş and Traian Canta 



US$233.00/€169.00 

The present volume provides an up-to-date, comprehensive 

and worldwide state-of–the art survey of the science and 

technology of materials, covering such topics as: powder 

metallurgy, metal-forming, heat-treatment and surface engineering 

and metal casting and welding, plus quality-control 

and environmental aspects. 

Creation of High-Strength Structures 

and Joints by Setting up Local 

Material Properties 

Eds. Heinz Palkowski and Kai-Michael Rudolph 



US$135.00/€99.00 

The demands now being made on metallic structures are increasingly 

complex, since the strains and application loading-profiles 

which occur are locally limited and inhomogeneous. 

Therefore, high-strength structures having optimised 

material properties have to be developed. 

Advances in Grinding and 

Abrasive Technology XIV 

Eds. Jiuhua Xu, Xipeng Xu, Guangqi Cai et al. 



US$273.00/€198.00 

The 117 papers selected for this volume were chosen for 

their particularly good quality and their relevance to the 

topic in question. 

The resultant contents bring, to the reader, the most recent 

advances made in the field of abrasive technology: including 

the mechanics and control of abrasive processes, modeling 

and simulation of abrasive processes, measurement and 

surface-quality assessment, cooling and coolants, polishing, 

wheel-truing and dressing, novel abrasive techniques and 

novel machining techniques. 


NEW 


An Annual Retrospective XI 




US$120.00/€166.00 

NEW 

Surface Reconstructions 




US$178.00/€246.00 

It is well-known, even at the most elementary level of scientific 

knowledge, that free surfaces have properties which 

make them differ from the underlying bulk material. In the 

case of liquids, it is common knowledge - even among laymen 

- that the liquid surface acts as though it were a distinct 

skin-like material. At a slightly more advanced level, it is 

known that the liquid surface will seek to minimize its total 

surface energy by minimizing its surface area; thereby affecting 

its local vapor-pressure and adsorption behavior. In 

the case of solids too, it has long been known that different 

crystallographic surfaces have different surface energies and 

that this can decide which surfaces ‘survive’ during crystal 

growth, and govern how solids - especially small particles - 

respond to prolonged annealing. 

The present work is a selection of 914 abstracts covering 

the whole of the field since its inception. It is hoped that this 

will be useful to researchers seeking to identify patterns of 

behavior in the reconstruction process, or to those wishing 

to know what work has already been done. 

NEW 

Synthesis and Properties of 

Surface Coatings 

Eds. Huibin Xu, Khiam Aik Khor, 

Shengkai Gong, Hongbo Guo 



US$125.00/€91.00 

This volume on the Synthesis and Properties of Surface 

Coatings includes presentations covering areas such as 

the properties and characterization of surface coatings and 

modifications, deposition and modification processes, plasma 

and ion-beam physics, industrial applications and novel 

processes. 

It offers a concise overview of these topics and will be useful 

to anyone entering the field. 

Latest Titles 

THERMEC 2006 



PROCESSING & MANUFACTURING OF 

ADVANCED MATERIALS 

Ed. Tara Chandra 



US$753.00/€546.00 

This collection assembles the total current knowledge of 

researchers and engineers/technologists working on various 

aspects of the processing, fabrication, structure/property 

evaluation and applications of both ferrous and non ferrous 

materials including biomaterials, ecomaterials and smart/ 

intelligent materials. 

THERMEC 2006 Supplement 

PROCESSING & MANUFACTURING OF 

ADVANCED MATERIALS 

Ed. Tara Chandra 

Advanced Materials Reseach Vols. 15-17 

978-0-87849-429-3, 2007, 1080 pages, CD only 

US$273.00/€198.00 

Advances in Composite 

Materials and Structures 

Eds. J.K. Kim, D.Z. Wo, L.M. Zhou, 

H.T. Huang, K.T. Lau and M. Wang 



US$509.00/€369.00 

This collection reflects the current worldwide state of 

knowledge concerning the latest scientific concepts and 

technological developments in the characterization, testing, 

mechanics, modelling, manufacturing and applications of 

various classes of composite materials and structures. It is 

also intended to promote the sharing of ideas and emerging 

technologies, as well as to foster R & D collaboration among 

academia, research institutions and the relevant industries. 

Ultra Clean Processing of 

Semiconductor Surfaces VIII 

Eds. Paul Mertens, Marc Meuris and Marc Heyns 



US$246.00/€178.00 

This collection of 86 peer-reviewed papers covers all aspects 

of the use of ultra-clean technology for large-scale 

integration on semiconductors, and cleaning and contamination-control 

in both front-end-of-line (FEOL) and backend-of-line 

(BEOL) processing. 

23

NEW 


Synthesis, Characterization and 

Properties of Nanostructures 

Computational and Experimental Approach 

Eds. Prafulla K. Jha and Arun Pratap 



US$138.00/€100.00 

This special-topic volume describes the novel computational 

and experimental approaches developed in order to 

resolve questions concerning the growth of nanostructures, 

their characterization and modeling. Motivated by the increasing 

need to synthesize and understand the properties 

of materials at the nanoscale, this issue is very timely and 

is an important step towards improving the knowledge of 

how nanomaterials can be made ever more useful to modern 

technologies. 

The book, divided into sections on Computational Nanomaterials 

and Experimental Nanomaterials, comprises a collection 

of ten original review/papers covering experimental 

approaches, theoretical analysis and numerical models. 

Seven papers are devoted to the growth and characterization 

of nanomaterials, while the other three deal with theoretical 

approaches to understanding their properties. Another 

attractive feature of the book is the common aim of these 

papers of achieving a deeper understanding of the underlying 

functionality of the properties of nanomaterials. 

NEW 

XVII International Materials 

Research Congress 

Eds. A. Balankin, J. Martínez Trinidad et al. 



US$138.00/€100.00 

The subjects covered in this special collection are all related 

to fatigue, corrosion-fatigue, elastoplastic fracture, damage, 

mixed-mode loading, brittle layers, the effects of boriding, 

short cracks, residual strength and many other topics. In 

all of the cases considered, the solutions obtained are based 

upon theory, experimental results and, in some cases are 

complemented by numerical analysis. 

PRICM 6 

Eds. Young Won Chang, Nack J. Kim et al. 



US$646.00/€468.00 

This work comprises edited versions of papers presented at 

the 6th Pacific Rim International Conference on Advanced 

Materials and Processing (PRICM-6), held on Jeju Island, 

Korea between the 5th and 9th November, 2007. 

Advanced Materials and Processing 

PRICM6 Part 4 

Eds. Young Won Chang, Nack J. Kim 

and Chong Soo Lee 


978-0-87849-463-7, 2007, 1450 pages, CD 

US$273.00/€198.00 

Complete set of PRICM 6 

Part 1-4 

Eds. Young Won Chang, Nack J. Kim 

and Chong Soo Lee 

978-0-87849-464-4, 2007, 4000 pages, DVD 

US$822.00/€595.00 

Advanced Structural Materials III 

Eds. H. Balmori-Ramirez et al. 



US$135.00/€99.00 

This useful collection presents fascinating reviews, and reports 

of recent investigations, related to advanced metallic, 

ceramic and composite structural materials. The topics covered 

include innovative processing techniques, phase transformations, 

mechanical properties and explorations of the 

relationship between processing methods, microstructure 

and mechanical behavior. 

Damage Assessment of Structures VII 

Eds. L. Garibaldi, C. Surace, K. Holford 

and W.M. Ostachowicz 



US$370.00/€268.00 

This collection covers the many activities, relevant to the 

damage assessment of engineering structures and systems, 

including the signal processing of sensor measurements and 

analytical techniques, as well as experimental case studies. 

Altogether, this will make this work essential reading for 

anyone with an interest in this field. 


Fracture and Damage Mechanics VI 

Ed. M.H. Aliabadi 



US$411.00/€298.00 

This book presents contributions from researchers in 21 

countries, and is based upon a forum meeting which promoted 

the exchange of the latest experimental and theoretical 

research results on structural integrity, durability and 

failure analysis; with the emphasis being placed on fracture 

and damage mechanics. 


An Annual Retrospective IX 




US$135.00/€98.00 

This ninth volume in the series covering the latest results 

in the field includes abstracts of papers which appeared between 

the publication of Annual Retrospective VIII (Volumes 

247-248) and the end of April 2007. 

Advances in Materials and 

Systems Technologies 

Ed. Akii Ibhadode 



US$232.00/€168.00 

This book presents the latest developments occurring in 

materials and systems research; especially in the areas of 

materials substitution and technological adaptation. 

Electroceramics in Japan X 

Ed. K. Katayama, K. Kato, T. Takenaka, 

M. Takata and K. Shinozaki 



US$218.00/€158.00 

Japan is currently the country which is the most active 

among those carrying out research in the rapidly expanding 

sphere of Electroceramics; a field that holds tremendous 

promise for a wide range of high-tech applications. 

The authoritative and intensively reviewed papers, which 

make up the present volume, encompass the topics of: dielectrics, 

piezoelectrics, ferroelectrics, semiconductors, 

magnetic ceramics, thin films, batteries and cells, memory 

devices and optical devices. 

Latest Titles 

NEW 



Electroceramics in Japan XI 

Eds. Kazumi Kato et al. 


US$218.00/€158.00 

Japan is currently the most active country among those 

carrying out research into the rapidly expanding sphere of 

Electroceramics; a field that holds tremendous promise for 

expanding or opening-up a wide range of high-tech applications. 

The authoritative and intensively reviewed papers 

which make up the present volume, encompass the topics of: 

dielectrics, piezoelectrics, ferroelectrics, semiconductors, 

magnetic ceramics, thin films, batteries and cells, memory 

devices and optical devices. 

The book undoubtedly fulfils its aim of bringing researchers 

and engineers fully up-to-date with the latest ideas and techniques 

appearing in the fast-moving science and technology 

of electroceramics. 

NEW 

Electromechanical and 

Systems Engineering 

Eds. G. Urriolagoitia-Calderón et al. 

Applied Mechanics and Materials Vol. 15 


US$125.00/€91.00 

This volume presents selected peer-reviewed papers related 

to diverse aspects of mechanics and materials. Cases related 

to the flow of fluids under various conditions, as well as 

heat transfer, are analyzed. There are also contributions, 

to the field of the design of mechanisms, which focus on 

biomechanics and the synthesis of mechanisms. Papers on 

mechanical vibration are linked to the design of machine 

tools, rotodynamics and vibrations in microbeams. Also, the 

evaluation of residual stresses and the estimation of the mechanical 

properties of vegetal materials are treated. Finally, 

fractal analysis is applied to solar radiation, and to the materials 

used in nanomedicine. The 21 papers are grouped into: 

Fluid Mechanics, Heat Transfer, Biomechanics and Design 

of Mechanisms, Mechanical Vibrations, Testing Materials, 

Fractal Analysis and Numerical Analysis. 

25

NEW 


Electrophoretic Deposition 

Fundamentals and Applications III 

Eds. A. R. Boccaccini, O. van der Biest et al. 



US$218.00/€158.00 

This volume is entirely focussed on electrophoretic deposition 

(EPD) as a processing technique for the fabrication of 

both traditional and novel materials. 

The papers contained in this volume address the successful 

application of EPD to the synthesis of engineering materials 

and components, including: free-standing ceramic 

components, ceramic and composite coatings on metallic 

substrates, fibre-reinforced ceramic composites, nanostructured 

composites and films, microelectronic substrates, carbon 

nanotube and bioactive coatings, functional materials, 

piezoelectric devices and solid oxide fuel cells. 

This work confirms the impressive potential of EPD for 

materials processing, and will be essential reading to those 

aiming to expand its applications and to help to integrate 

EPD into established manufacturing routes. 

NEW 

Light Metals Technology 2009 

Eds. M.S. Dargusch & S.M. Keay 

Materials Science Forum Vol. 618-619 


US$273.00/€198.00 

The aim of this special collection was to provide an opportunity 

for companies, academic institutions and government 

research agencies to share, in a collaborative manner, their 

new research and development work. . The main focus was 

light metals and their applications. It is to be noted that there 

was a significant number of papers related to titanium research: 

due to the extended range of applications of titanium 

components and the growth in end-user demands for affordable 

manufacturing. As a result, the collection is truly representative 

of the three light metals: aluminium, magnesium 

and titanium; with a similar number of papers concerning 

each metal. This book will therefore be essential readingmaterial 

for anyone working in the light-metal alloy field. 

Diffusion in Solids and Liquids 

Heat Transfer - Microstructure & Properties 

Eds. Andreas Öchsner and José Grácio 



US$135.00/€99.00 

The 29 peer-reviewed papers focus on heat transfer and microstructure 

& properties. The collection also includes papers 

related to: Phase Change: Multiscales and Strong Coupling, 

Nanostructures and Materials. The whole provides a 

neat guide to this specialized subject. 

Silicon Carbide and Related Materials 

ECSCRM 2006 

Eds. N. Wright et al. 



US$477.00/€346.00 

This collection closely reflects the latest experimental and 

theoretical advances made in this field; divided into the subsections: 

SiC Bulk Growth, SiC Epitaxy, SiC Characterization 

and Theory, SiC Processing, SiC Devices and Nitrides 

and Related Materials. 

High-Performance Ceramics IV 

Eds. Wei Pan and Jianghong Gong 



US$753.00/€546.00 

The special volume aims to promote the interactions among 

scientists, engineers, technicians and students engaged in 

advanced ceramics research, development and production 

and provided a forum for the presentation, discussion and 

review of the latest advances in the field of the science and 

technology in the field of advanced ceramics successfully. 

More than 767 peer reviewed papers present the most up-todate 

knowledge in this field. 

Research Trends in Contemporary 

Materials Science 

Eds. Dragan P. Uskoković et al. 



US$273.00/€198.00 

This useful collection comprises 92 peer-reviewed papers, 

grouped into nine sections: I Nanostructured Materials; II 

Solid State Phenomena; III Fine Particles; IV Thin Films; V 

Materials for Hydrogen Energy Storage; VI Optical Materials; 

VII Biomaterials; VIII Polymers & Composites; and IX 

Metallic Systems. 


The Mechanical Behavior 

of Materials X 

Ed. S.W. Nam, Y.W. Chang, S.B. Lee et al. 



US$549.00/€398.00 

The objective of this collection was to gather together the 

latest information on the mechanical behavior of materials. 

The volumes cover the progress made in all aspects of the 

mechanical behavior of materials, seen from both the macroscopic 

and microscopic viewpoints. 

The collection will be of interest to users, producers and researchers, 

whether engineers or scientists, who have a common 

interest in any aspect of materials behavior. 

Advanced Biomaterials VII 

Eds. Young-Ha Kim, Chong-Su Cho, Inn-Kyu Kang, 

Suk Young Kim and Oh Hyeong Kwon 



US$411.00/€298.00 

This “Advanced Biomaterials” collection comprises more 

than 237 peer-reviewed papers. The latter are grouped into 

handy sections: Tissue Engineering, Drug Delivery System, 

Metal, Ceramics, Polymer, Cell-Matrix Interactions, Surface 

Modifications, Micro-/Nano- and Others. Overall, this 

book offers a multitude of valuable insights into the important 

progress being made daily in this subject-area. 

Diffusion and Thermodynamics 





US$135.00/€98.00 

The collection comprises 37 peer-reviewed papers providing 

up-to-date information on the Diffusion and Thermodynamics 

of Materials and will be an invaluable resource for 

anyone concerned with these topics. 

Nitrides and Oxynitrides III 

Ed. Hasan Mandal 



US$135.00/€99.00 

This volume is dedicated to the ever-expanding fields of application 

of nitrides in ceramics, metals, glasses, composites 

and coatings. The papers cover all of those branches of 

materials science and engineering which concern the role 

of nitrogen in the improvement and modification of the 

properties of materials; particularly those destined for novel 

applications. 

Latest Titles 

NEW 



Manufacturing 

Automation Technology 

Eds. Guanglin Wang, Huifeng Wang and Jun Liu 



US$411.00/€298.00 

The present volume comprises a collection of peer-reviewed 

papers covering innovations and practical experience regarding 

manufacturing automation education; current and 

developing manufacturing automation; advanced manufacturing 

technology including flexible manufacturing, virtual 

manufacturing, Green manufacturing and re-manufacturing, 

and web-based manufacturing; computer-integrated manufacturing 

systems; CAD/CAE/CAPP/CAM; product lifecycle 

management (PLM); computerized numerical control 

systems and flexible manufacturing systems; industrial robotics; 

process monitoring and quality control of manufacturing 

systems; group technology (GT); PDM, ERP, logistics 

and supply chains. 

This work will be invaluable to production and research 

engineers, and also to research students and academics interested 

in the field. 

NEW 

Micro and Nano Technology 

Ed. Xiaohao Wang 



US$276.00/€200.00 

This volume presents a selection of over 98 peer-reviewed 

papers from the 1st International Conference of CSMNT, 

held on Nov. 19-22, 2008, in P.R. China. 

It is focussed entirely on the Micro/Nano field, and acquaints 

the reader with the latest development in MEMS 

and nanotechnology. 

It will thus be a great help to those working in this specialist 

field. 

27

NEW 


Nanomaterials Synthesis 

and Applications 

Ed. Umapada Pal 

JNanoR Vol. 5 


US$166.00/€120.00 

NEW 

New Frontiers in Materials 

Processing Training 

and Learning 

Ed. M. Marcos 



US$124.00/€90.00 

Materials processing engineering is currently considered 

to be an interdisciplinary engineering field. Learning and 

training in materials processing must therefore be accompanied 

by diverse sets of workshops and practical laboratory 

experiments. In general, the equipment which is required to 

be available in these laboratories or workshops is very expensive 

and can become obsolete within a few years. On the 

other hand, the continual evolution of materials inevitably 

drives change. However, innovative education techniques, 

based upon information and communications technologies, 

are currently under development, with the aim of improving 

the teaching of materials processing. 

This special volume on New Frontiers in Materials Processing 

Learning and Training reports these latest developments 

and novel applications, and describes theoretical research 

and case studies related to innovative education as applied 

to materials processing. 

This special volume is sure to encourage the further development 

of new learning and training techniques in this, and 

other, disciplines. 

HgCdTe System - Reference Guide 




US$135.00/€98.00 

This system, consisting of compositions lying between the 

end-members, CdTe and HgTe, constitutes perhaps the third 

most important semiconductor after Si and GaAs. Its importance 

stems from the ability to tailor the band-gap precisely 

between that (1.5eV) of the semiconductor, CdTe, and the 

zero value of the semi-metal, HgTe; giving, in particular, 

one of the most versatile infra-red detectors known. The intermediate 

compositions also benefit from the usual mechanisms 

which improve the mechanical properties of alloys. 

Diffusion in Advanced Materials 

and Processing 

Eds. Y.H. Sohn, C. Campbell et al. 



US$135.00/€98.00 

This special volume focuses on the identification and modeling 

of various diffusion mechanisms and phenomena occurring 

in the advanced materials used in structural, electronic 

and other applications, as well as those taking place 

during processes such as deposition, solidification and heattreatment. 

Advances in Optics Design and Precision 

Manufacturing Technologies 

Eds. Guo Fan JIN et al. 



US$494.00/€358.00 

These papers cover optical design and fabrication, ultra-precision 

manufacturing, optical metrology and other related 

topics. It will be invaluable to industrial production workers 

and academics everywhere. 

Progresses in Fracture and Strength of 


Eds. Yu Zhou, Shan-Tung Tu and Xishan Xie 



US$676.00/€490.00 

The collection coveres all aspects of fracture and strength of 

materials and structure, particularly of advanced materials 

ranging from nanoscale to macroscale and modern structural 

systems ranging from large scale plants to micro- devices. 

It is believed that these volumes represent the state-of-theart 

of research in the field of fracture and strength of materials 

and structures. 


APPLIED CRYSTALLOGRAPHY XX 

Eds. Danuta Stróż and Małgorzata Karolus 



US$232.00/€168.00 

The goal of this collection is to provide the opportunity for 

researchers working in many different fields to showcase 

their latest achievements in the arena of structural studies, 

as applied to the materials commonly used in industry. The 

book comprises 64 peer-reviewed papers which provide excellent 

up-to-date coverage of the subject. 

Advances in 

Experimental Mechanics V 

Ed. J. Quinta da Fonseca 



US$232.00/€168.00 

The papers contained in this useful volume fully reflect 

the diverse nature of the field of experimental mechanics. 

They have been compiled from contributions coming from 

all over the world and are grouped into the chapter-topics: 

Structural Integrity, Inverse Problems, Mechanical Modelling, 

Welded Structures, NDE, Micromechanical Testing, 

Impact of Composites, Impact and High Strain-Rate, and 

Dynamic Loading. 

Precision Surface Finishing 

and Deburring Technology 

Eds. Hang Gao, Zhuji Jin and Yannian Rui 



US$253.00/€183.00 

The aim of this special volume is to offer the opportunity of 

bringing together academic researchers and industry workers 

in order to exchange information on the latest developments 

in, and applications of, advanced precision surface 

finishing and deburring technologies; as well as generally 

promoting personal contact and interdisciplinary research 

collaborations. 

Innovation in Ceramic Science 

and Engineering 

Eds. Katsutoshi Komeya et al. 



US$232.00/€168.00 

The collection comprises 64 papers from various researchers 

in the fields of ceramics and related materials. Fundamental 

aspects, synthesis and processing, functional ceramics, 

engineering ceramics, micro/nano structures, and 

various applications are extensively discussed. 

Latest Titles 

NEW 



New Materials for 

Extreme Environments 

Ed. Ch. Linsmeier and M. Reinelt 



US$218.00/€158.00 

The development of materials designed for application in 

extreme environments is a very active field of research. In 

recent years, it has been realized by the materials science 

community that solutions to demanding applications in different 

fields can be identified by implementing common materials 

concepts. Research effort and technological development, 

driven by application requirements, are now a bridge 

between apparently separate communities. As first realized 

by the European Integrated Project “ExtreMat – New Materials 

for Extreme Applications”, common materials solutions 

are now being sought and found in the fields of thermal 

management materials, protective materials, radiation-resistant 

materials, bonding and interfaces, as well as advanced 

materials characterization and application-oriented testing. 

This special collection is divided into: I. Overview; II. Protection 

Materials; III. Heat Sinks; IV. Bonding and Interfaces; 

V. Radiation-Resistant Materials; VI. Advanced Materials 

Characterization and Testing. It provides incomparable 

coverage of the current state of the art. 

NEW 

Positron and 

Positronium Chemistry 

Eds. S. J. Wang, Z. Q. Chen, B. Wang and Y. C. Jean 



US$207.00/€150.00 

This special volume covers nearly every relevant area of 

positron and positronium chemistry, the peer-reviewed papers 

being grouped into 6 sections: 1. Fundamental Aspects 

of Positronium Chemistry, and Symposium on Positronium 

Molecules; 2. Polymer and Insulator; 3. Surface and Interface, 

Non-Metallic Solids; 4. Porous Materials and Nanostructures; 

5. Liquids and Bio-Application; 6. Advances in 

Experimental Methods. 

29

NEW 


Powder Technology 

and Application 

Ed. Guosheng Gai 



US$166.00/€120.00 

The technological demands on powder-processing of new 

materials, and on the associated resources, have reached a 

particularly prosperous state. Many types of industrial material 

processed using powder technology become the basis of 

important new materials, including those used in: building, 

papermaking, plastics, coatings, energy-use, environmental 

protection, etc. The cost and quality of raw industrial powder 

materials have a direct effect upon costs, benefits and 

market competitivity. 

This collection of peer-reviewed papers focuses on powder 

preparation and new materials, as related to industrial applications. 

Most of the papers concentrate on the topics of 

nano-powder preparation and application to new materials, 

and powder-processing technology as applied to chemicals 

and minerals. This makes the book an invaluable guide to 

the state-of-the-art of this field. 

NEW 

SiAlONs and Non-oxides 

Eds. Katsutoshi Komeya, Yi-Bing Cheng, 

Junichi Tatami and Mamoru Mitomo 



US$166.00/€120.00 

During the past fifty years, significant progress has been 

achieved in the theory and application of SiAlONs and other 

similar non-oxide ceramics. In particular, the advances of 

the last thirty years in research and development have made 

SiAlONs, and similar materials, some of the most important 

engineering ceramics and new functional ceramics of today. 

The papers presented in this volume are authored by leading 

international experts on SiAlON and non-oxide materials 

and therefore give an excellent overview of current and 

future trends in the field. 

Composite Materials V 

Eds. Di Zhang, Jingkun Guo and Chi Y. A. Tsao 



US$177.00/€128.00 

This collection comprises 45 peer-reviewed papers covering 

the latest progress in the research and development of composite 

materials; including metal-, ceramic- and polymerbased 

composites. The areas covered include the synthesis, 

processing, structure, properties and performance of composite 

materials. 

Diffusion and Stresses 

Eds. D. L. Beke, Z. Erdélyi and I. A. Szabó 



US$135.00/€98.00 

This timely book covers all aspects of the interrelationship 

between stresses and diffusion phenomena occurring in bulk 

solids, thin films and multilayered materials and also those 

which take place at surfaces and interfaces. Such stresseffects 

are increasingly important at the nanoscale, and the 

topics covered are fully related to recent progress made in 

in the field and to the further challenges which are yet to 

be met. 


Eds. Franz Glombitza, Wolfgang Sand, 

Axel Schippers and Sabine Willscher 



US$232.00/€168.00 

The main focus of this collection of peer-reviewed articles is 

the role that micro-organisms play in the treatment of minerals, 

metals, coal, oil, waste materials; and also in related 

environmental issues. 

Recrystallization and Grain Growth III 

Eds. S.-J.L. Kang et al. 



US$573.00/€415.00 

This work is a collection of 235 peer-reviewed papers which 

review the most up-to-date achievements made in this subject 

and in related areas: (1) Static Recovery, Recrystallization 

and Related Properties, (2) Dynamic Recovery, Recrystallization 

and Elevated Temperature Deformation, (3) 

Grain Growth and Related Properties, (4) Grain Boundary/ 

Interface Structure and Microstructure Development, (5) 

Computer Simulation and Modeling, (6) Recrystallization 

and Grain Growth in Ceramics and Thin Films, (7) Nanocrystallization 

and Grain Growth, and (8) Other Microstructure-Related 

Topics. 


Safety and Structural Integrity II 

Ed. Young-Jin Kim 



US$218.00/€158.00 

The primary objective of this collection of 42 peer-reviewed 

authoritative articles is to share with the reader the very latest 

information on cutting-edge technologies in the fields of 

safety and structural integrity. The topics addressed by this 

collection span a wide range of issues: including fracture 

and fatigue cracking, reliability evaluation, NDE, modeling 

and design. Particular attention is paid to emerging techniques 

for the treatment of complicated structures. 

Nanoscience and Technology 

Eds. Chunli BAI, Sishen XIE, Xing ZHU 



US$549.00/€398.00 

The collection covers the topics of: Nanomaterials and 

preparation, self-assembly technology, nanoelectronic and 

nanophotonic devices, nanobiotechnology and nanomedicine, 

characterization and measurement of nanostructures, 

computation and modeling at the nanoscale, consumer nanotechnologies 

and applications, converging technologies- 

NBIC, nanocomposites and nanomechanics. 


and Informatics II 

Eds. J. Gyulai and P.J. Szabó 



US$366.00/€265.00 

This collection includes state-of-the-art papers by scientists 

and research groups working in fields encompassing metals 

and alloys, silicates, polymers and composites. All-in-all an 

unique view of modern technologies. 

Light Metals, Aerospace Materials and 

Superconductors 

Eds, Yafang Han et al. 



US$647.00/€469.00 

This immense 4 volume set comprises 495 peer-reviewed 

papers, divided into four parts: Magnesium (Part 1), Aluminum 

Alloys (Part 2), Aerospace Materials (Part 3) and 

Superconducting and Functional Materials (Part 4). 

Latest Titles 

NEW 



Silicon Carbide 

and Related Materials 

ECSCRM 2008 

Eds. Amador Pérez-Tomás et al. 



US$483.00/€350.00 

The volume is arranged into seven chapters which cover the 

topics of SiC and related materials, bulk and epi-growth, 

characterization of SiC and related materials, devices and 

applications. Novel subject areas that enjoy a strong increase 

in contributions include cutting-edge SiC nanostructures, 

and graphene. From the scientific point of view, it is 

seen that bipolar degradation can be significantly reduced 

by appropriate materials preparation. Cubic Silicon Carbide 

is once again attracting attention from both researchers and 

industry. It has also been shown that the reliability of MOS 

structures on SiC is improving. Moreover, there has been a 

step-change increase in the application of SiC technologies 

to renewable energy systems and space domains. A close examination 

of this volume will equip the reader with a clear 

state-of-the-art overview of the field. 

NEW 

Silicon Carbide and Related 

Materials 2007 

Eds. Akira Suzuki, Hajime Okumura et al. 



US$482.00/€349.00 

This two-volume set comprehensively documents the 

present understanding of various topics of scientific and 

technological interest: such as the growth of bulk crystals, 

the growth of epitaxial layers, extended and point defects, 

physical properties, theoretical modeling, surface- and 

nano-structures, the development of device processing, and 

the requirements demanded of electronic devices which can 

operate under extreme conditions and exhibit outstanding 

performance. 

31

NEW 


Multi-Functional Materials and 

Structures II 

Eds. Yansheng Yin and Xin Wang 



US$500.00/€690.00 

NEW 

Processing and Applications of 

Structural Metals and Alloys 

Eds. Marcello Cabibbo and Stefano Spigarelli 



US$270.00/€196.00 

This volume brings together the most exciting ideas of international, 

and especially European, researchers concerning 

the latest developments in severe plastic deformation techniques 

and in the thermomechanical processing of materials 

for both structural and functional applications. The areas 

of interest include not only the conventional hot- and colddeformation 

of metals but also recently developed severe 

plastic deformation processes for the production of ultrafine 

and nanostructured materials. 

In particular, the following specific topics are covered: 

Multifunctional nanostructured coatings, Modelling and recrystallization, 

Nanostructured materials and Severe plastic 

deformation, Hot plastic deformation, Process Mechanics 

and Microstructure. 

The quality of the present papers reflects the exacting standards 

of the professor. 

Fundamentals of Deformation 

and Annealing 

Eds. P.B. Prangnell and P. S. Bate 



US$273.00/€198.00 

The collection thus provides an opportune moment to review 

the state of the art and to encourage a new generation 

of scientists to take up the challenge of tackling the 

outstanding critical issues remaining in deformation and 

annealing. 

Superplasticity in Advanced Materials 

Ed. K.F. Zhang 



US$316.00/€229.00 

Interest in the phenomenon of superplasticity has been increasing 

steadily over the past thirty-four years, both from 

the viewpoint of fundamental scientific understanding as 

well as of industrial application. The scope of superplasticity 

has also broadened materials-wise, and now includes, in 

addition to metals: intermetallics, ceramics, bulk metallic 

glasses, nanostructured materials and composites. 


and Informatics II 

Eds. J. Gyulai and P.J. Szabó 



US$366.00/€265.00 

The book is divided into: Classical Materials and Technologies 

– including Mechanical Engineering, Electrotechnics, 

Energetics, Ceramics, Polymers; Special Materials and 

Technologies – including Nanotechnology, Biotechnology 

and other Specialties; Modern Research and Characterization 

Methods; Modelling and Materials Informatics; Innovative 

Products and Technologies – including Industrial Applications, 

Technologies and Properties: The State and Possibilities 

of Nanotechnological Research; Structural Change 

of Higher Education after Entering BSc and MSc Degree 

Courses; Innovation Strategy – R&D Support – Framework 

Programs. 

Defects and Diffusion in Ceramics IX 




US$166.00/€120.00 


Explosion, Shock Wave and Hypervelocity 

Phenomena in Materials II 

Eds. S. Itoh and K. Hokamoto 



US$246.00/€178.00 

The objective of this special-topic volume was to disseminate 

work on current trends in Explosion, Shock Wave and 

Hypervelocity Phenomena in Materials. The 66 peer-reviewed 

papers cover topics such as: shock waves, detonation 

and combustion, materials processing, numerical simulation 

and high strain-rate phenomena. 

Progress in Bioceramics 

Ed. Maria Vallet-Regi 



US$221.00/€160.00 

The main purpose of this special-topic book, devoted to current 

trends in bioceramics, is to survey the present situation 

in this field, and to cover as fully as possible the various 

lines of research. The book includes many ceramic materials 

having clinical applications; some of them already entirely 

feasible, while others are expected to be available in the very 

near future. The 14-chapter volume encompasses widely differing 

studies and reviews dealing with various aspects of 

the currentworld of bioceramics. 

High-Performance 

Ceramics V 

Eds. Wei Pan and Jianghong Gong 



US$537.00/€389.00 

The contributions covered almost all aspects of the field including: 

functional ceramics, structural ceramics, processing 

of ceramics and the evaluation of ceramics. The volume 

will therefore be of great interest to any scientist or engineer 

working in the field of high-performance ceramics. 

Thin Slab Direct Rolling of 

Microalloyed Steels 

J.M. Rodriguez-Ibabe 



US$72.00/€52.00 

This handbook aims to provide an approach to the different 

metallurgical aspects involved in the application of thermomechanical 

treatments in the TSDR route. 

Latest Titles 

NEW 



Sheet Metal 2009 

Eds. B. Shirvani, R. Clarke et al. 



US$346.00/€251.00 

Collections of peer-reviewed papers are always excellent 

sources of knowledge and new ideas for researchers working 

in both universities and industry. The present collection, 

in particular, provides interdisciplinary and international resources; 

thus encouraging the close cooperation of materials 

scientists, and manufacturing and computer engineers and 

promoting the diffusion of research results, and technology 

transfer, in all areas of Sheet Metal Processing and Characterization. 

The main focus of this special volume is on innovation in 

forming processes, high-strength materials and joining technologies. 

The 72 papers are grouped into chapters on: Hydroforming, 

Joining , Manufacturing Systems, Micro Technologies, 

Quality/Surface Conditioning, Tooling, Stamping, 

Tube-Forming, Incremental Forming, Modelling, Materials 

and Testing, Drawing, Bending, and Roll-Forming. 

NEW 

Smart Textiles 

Eds. Pietro VINCENZINI 

and Rita PARADISO 



US$166.00/€120.00 

This timely collection comprises 24 peer-reviewed papers 

which, between them, present a comprehensive survey of 

“Smart Textiles”. The papers are grouped into the handy 

chapters: 1: Adaptive / active textiles; 2: E-textiles; 3: Functionality 


33

NEW 


Sintering Fundamentals 

Ed. G.S. Upadhyaya 



US$166.00/€120.00 

This book comprises state-of-the–art reviews written by 

acknowledged experts who are active in sintering science. 

It includes seven invited reviews by authors hailing from 

five countries: J-M.Chaix (France) discusses quantitative 

aspects of the microstructures and modeling of sintering; 

with the technical aspects of image-analysis - including 

that of nanostructured materials - adding extra value. Z.S. 

Nikolic (Serbia) provides a theoretical review of the simulation 

of liquid-phase sintering, particularly under microgravity 

conditions, and extensively and critically reviews the 

results reported in the sintering literature. A.L. Lisovsky 

(Ukraine) opens up the vista of deconsolidation of polycrystalline 

skeletons in sintered composite materials, and deals 

with systems having more than one refractory solid phase, 

and with nanodispersed composite materials. G.S. Upadhyaya 

( India) reviews the Samsonov model for the electronic 

mechanism of sintering, and its relevance; pointing out that, 

although the model is a qualitative one, it has great utility 

as a predictive tool and that various case-studies drawn 

from real multi-phase material systems are a testimony to 

the value of Samsonov’s model. The last three papers are 

materials-based, but interweave the theoretical aspects of 

sintering in order to achieve successful alloy design. K. 

Biswas (India) discusses the solid-state and liquid-phase 

sintering fundamentals of SiC ceramics in two separate papers 

and includes, in particular, the details of spark-plasma 

sintering of this ceramic. Finally, P. Datta (Germany), discusses 

in great detail the materials science aspects of doped 

LaGaO3-based SOFC( solid oxide fuel cell) materials; including 

their sintering, recalling that this oxide ceramic has 

attracted world-wide attention and has encouraged lively 

competition among scientists. 

This volume thus offers a stimulating and thorough overview 

of the topic. 

Multiscale Kinetic Modelling 


Eds. R. Kozubski, G.E. Murch and P. Zięba 



US$135.00/€98.00 

The inspiration for this book was to gather together the efforts 

of those physicists, materials scientists/engineers and 

other scientists who are carrying out interdisciplinary research 

into multiscale modelling of time-evolving phenomena 

in materials. The book will be of great interest not only 

to those working in the field itself, but also to experimentalists 

who wish to appreciate fully the possibilities and limitations 

of these techniques. 

Doped Nanopowders 

Synthesis, Characterisation, Applications 

Ed. Witold Łojkowski et al. 



US$218.00/€158.00 

This collection was intended to focus upon the particular 

topic of the doping of nanopowders. It was the object of 

the editors to bring together many scientists to share their 

experience in the synthesis, characterization and application 

of nanopowders doped with ions of rareearth elements, transition 

elements, or other metals. 

Engineering Plasticity 

and Its Applications 

Eds. N. Ohno and T. Uehara 



US$479.00/€347.00 

This edited collection of 240 peer-reviewed articles covers a 

broad range of topics dealing with plasticity in various materials, 

such as metals, composites, polymers, foams, soils, 

and rocks at the nano-, micro- and macro-scales. These informative 

papers will bring the reader fully up-to-date with 

the latest research efforts advancing on a broad range of 

fronts in engineering plasticity. 

Designing of Interfacial Structures 

Ed. Masaaki Naka 



US$246.00/€178.00 

Since materials science and engineering are the common 

factor in many industries, the “designing of interfaces for 

materials and their joints” which is an essential aspect of 

materials science and technology become key points for 

consideration in this collection. 


Eco-Materials Processing 

and Design VIII 

Eds. Hyungsun Kim, Junichi Hojo et al. 



US$435.00/€315.00 

This up-to-date collection, “Eco-Materials Processing and 

Design VIII”, covers – on a global scale – the outstanding 

advances made in researching, producing and using eco-materials. 

It furnishes materials scientists and end-users with a 

valuable source of information and new concepts covering 

the complete spectrum of ecology, eco-materials, nano-materials, 

bio-materials, recycling, environmental protection 

and energy conversion related materials. 

Sheet Metal XII 

Eds. F. Micari, M. Geiger et al. 



US$411.00/€298.00 

Collections of peer-reviewed papers always make excellent 

sources of knowledge and new ideas for researchers coming 

from both universities and industry. The present collection 

in particular provides interdisciplinary and international 

resources, thus encouraging the close cooperation of material 

scientists, manufacturing and computer engineers and 

promoting the diffusion of research results, and technology 

transfer, in all areas of Sheet Metal Processing and Characterization. 

Progress of Precision Engineering and 

Nano Technology in Asia 

Eds. Shen Dong and Yingxue Yao 



US$273.00/€198.00 

The present collection aims to provide the reader with the 

most up-to-date information on precision manufacturing 

theory and techniques, ultra-precision measurements and 

control systems, ultra-precision machining systems and micro/nano 

technology. The aim of this project is to promote 

the exchange of information and cooperation between experts 

in the fields of precision engineering, and micro and 

nano technologies. 

Diffusion and Ionic 

Conduction in Oxides 

Data Compilation 




US$395.00/€268.00 

Latest Titles 

NEW 



Sintering of Systems with 

Interacting Components 

A.P. Savitskii 



US$166.00/€120.00 

The aim of this publication is to acquaint those readers 

who are interested in the fundamentals of powder materials 

sintering, with the latest scientific achievements which are 

important to its successful practice. The book contains new 

information, not previously known in the West, as well as 

offering a totally fresh view of this vital issue. The work 

discloses to western eyes a new scientific trend in the science 

of sintering systems with interacting components; 

a trend of which many experts are unaware. The new approach 

will considerably enrich and advance investigations 

into the theory and practice of sintering and aid their further 

development. 

The essence of the new concepts is explained as simply as 

possible, and in every detail, and is sure to be welcomed 

by researchers and specialists, as well as by students and 

practising engineers. 

NEW 

Solid Phase Transformations II 




US$166.00/€120.00 

This topical volume includes ten invited papers that cover 

selected areas of the field of solid phase transformations. 

The first two contributions represent a burgeoning branch; 

that of the computer simulation of physical phenomena. 

The following three articles deal with the thermodynamics 

of phase transformations as a basic theory for describing the 

phenomenology of phase changes in matter. The next paper 

describes the interconnections between structural stability 

and the electronic structure of phases. Two further articles 

are devoted to displacive transformations; a field where 

there are many open questions. It was noted that the influence 

of pressure upon phase transitions has not previously 

been studied very frequently. The next paper deals with its 

effect upon phase transformation in hydride phases. New 

materials, emerging as potential solutions to demanding 

technical problems require the attention of engineers and 

researchers. The last contribution reviews the recent developments 

in Co-based alloys. 

Overall, this work provides a useful guide to the above topics. 

35

NEW 


State-of-the-art Research 

and Application of 

SMAs Technologies 

Eds. Pietro VINCENZINI and Stefano BESSEGHINI 



US$166.00/€120.00 

A select collection of 29 peer-reviewed papers together offering 

a great deal of timely information on, “State-of-theart 

Research and Application of SMAs Technologies”. The 

papers are conveniently arranged under the succinct headings: 

chapter 1: Materials; chapter 2: Phase transformation 

and microstructure; chapter 3: Engineering; chapter 4: Applications. 

NEW 

Ultra Clean Processing of 

Semiconductor Surfaces IX 

Eds. Paul Mertens, Marc Meuris and Marc Heyns 



US$246.00/€178.00 

This special collection covers every aspect of ultra-clean 

technology as applied to large-scale device integration on 

semiconductors, including cleaning and contamination control 

in both front-end-of-line (FEOL) and back-end-of-line 

(BEOL) processing. This includes studies of general topics 

such as particle removal using various types of mechanical 

treatment, drying, contamination control and contamination 

metrology. The FEOL and BEOL contributions cover 

the surface chemistry of silicon and related semiconductors 

such as SiGe and Ge, cleaning as related to new gate stacks, 

cleaning at the interconnect level, resist strip and polymer 

removal, cleaning and contamination control for various 

new materials and cleaning after chemical-mechanicalpolishing 

(CMP). 

This work will be essential reading matter for those working 

in the field. 


Eds. Guy Daculsi and Pierre Layrolle 



US$494.00/€358.00 

Some of the topics covered deal with advanced materials 

and technologies that support the exciting technique of the 

regeneration of osteoarticular tissues using minimal invasive 

surgery and bioactive prostheses. This book will be invaluable 

to materials scientists, bioengineers, molecular and 

cellular biologists, bone biologists, dentists and clinicians. 


Eds. Xingdong Zhang, Xudong Li, 

Hongsong Fan, Xuanyong Liu 



US$479.00/€347.00 

The contents comprise sections on: Apatites and Calcium 

Phosphates, Glass and Glass-Ceramics, Nanomaterials, 

Ceramic Composites, Bioactive Coatings and Biomimetic 

Apatites, Bioactive Cements, Protein Absorption & Cell Interactions, 

Porous Materials, Delivery Carriers for Drugs, 

Osteo-inductive Materials, Tissue Engineering, Wear, Other 

Materials, Orthopaedic Applications, Dental Materials & 

Applications. 

Advances in Materials Manufacturing 

Science and Technology II 

Eds. Chengyu Jiang et al. 



US$435.00/€315.00 

The present volume contains 293 selected and peer-reviewed 

papers, carefully chosen from among the more than 500 papers 

presented, by worldwide specialists from industry and 

academia, at the 12th International Manufacturing Conference 

in China; organized by the Northwestern Polytechnic 

University. 

Advances in Abrasive Technology IX 

Eds. Dongming Guo et al. 



US$366.00/€265.00 

This book presents a wealth of valuable up-to-date information 

for active researchers and engineers, and will certainly 

form a solid basis for any future research, in the field of abrasive 

technology, which is aimed at creating new and practical 

machine tools, systems and processes, or at identifying 

new characteristics.. 


Layered, Functional Gradient 

Ceramics, and Thermal 

Barrier Coatings 

Ed. Marc Anlada 



US$218.00/€158.00 

This special-topic collection is intended to showcase the 

very latest knowhow concerning the design, fabrication 

and reliability of layered ceramics, ceramic coatings and 

functionally graded ceramics. It presents an overview of 

the fundamentals involved in this area, as well as an insight 

into the critical issues and future perspectives touching these 

materials. 

Progress in Powder Metallurgy 

Eds. Duk Yong Yoon, Suk-Joong L. Kang, 

Kwang Yong Eun and Yong-Seog Kim 



US$549.00/€398.00 

The large number, and high quality, of the papers making 

up this collection reflect the continuing vigor of the powdermetallurgy 

industry and associated research all over the 

world. The emergence of such new fields as nano-materials, 

cellular materials and process modeling by computer 

simulation is very evident, while traditional fields such as 

compaction and sintering are also being tackled anew using 

more sophisticated concepts and tools. 

Nanocomposites and 

Nanoporous Materials 

Ed. Chang Kyu Rhee 



US$166.00/€120.00 

Unlike previous book series covering nanocomposite materials, 

this new series aims to bring together researchers 

working in the fields of nanocomposites, nanoporous materials 

and environmentally-friendly materials research. A 

project to be followed with interest. 

Defects and Diffusion 


An Annual Retrospective IX 




US$246.00/€178.00 

Latest Titles 

NEW 



Ultra-High-Pumpability and 

High Performance 

Concrete Technology 

Eds. Hao-Wen Ye and Gai-Fei Peng 



US$276.00/€200.00 

The main theme of this special collection was the preparation 

and properties of high-strength/high-performance concrete, 

and covered a wide range of topics and scopes, such 

as preparation of high strength/high performance concrete, 

durability, raw materials, workbility, chemical admixture, 

new applications of concrete, property characterization, and 

the behavior of concrete structures. 

A total of 64 peer-reviewed papers was accpted for publication 

and these were grouped into : I. Preparation of Ultra 

High Performance Concrete; II. Workability of Concrete;. 

Chemical Admixtures; IV. Mineral Admixtures and Raw 

Aggregate; V. Durability of Concrete; VI. Mechanical Properties 

and Others. 

NEW 

Ultra-Precision 

Machining Technologies 

Eds. Julong Yuan, Shiming Ji, 

Donghui Wen and Ming Chen 



US$345.00/€250.00 

This special volume presents the very latest findings and 

ideas in the field of ultra-precision machining. 

The topics covered include: Single-point diamond turning 

of optical materials or moulding dies; Single-point diamond 

turning of other materials; Ultra-precision grinding of optical 

materials or moulding dies; Ultra-precision grinding of 

hard materials; Ultra-precision polishing of optical materials 

or moulding dies; Ultra-precision polishing of single 

crystals or chemical-mechanical polishing; Ultra-precision 

polishing of metals or alloys; High-speed machining technology 

and applications; Ion beam figuring and polishing; 

Electron beam patterning and polishing; Ultra-precision 

laser machining; Ultra-precision electro-discharge machining; 

Ultra-precision coating; Glass moulding and plastic 

injection moulding of optical and electrical components; 

Fabrication of micro-electromechanical systems (MEMS); 

Ultra-precision machine tools; New ultra-precision machine 

and its machine elements; Ultra-precision positioning and 

control; Ultra-precision shape or surface-roughness measurement; 

New tools or new applications of tools; Other 

precision machining technology; Advanced manufacturing 

and design methods. 

37


11th International Ceramics Congress 

978-3-908158-01-1, 2006, 2750 pp, US$647.00/€469.00 

A Diffusion-Data Source-Book 

978-3-908451-08-2, 2005, 378 pp, US$246.00/€178.00 

A Physicist’s Outlook on New Materials 

978-0-87849-615-0, 1991, 222 pp, US$138.00/€100.00 

Abrasive Waterjet Machining of Engineering Materials 

978-0-87849-918-2, 2003, 114 pp, US$66.00/€48.00 

Acoustic Emission Testing 

978-0-87849-420-0, 2006, 452 pp, US$273.00/€198.00 

Advanced Biomaterials VI 

978-0-87849-967-0, 2005, 710 pp, US$322.00/€233.00 

Advanced Biomaterials VII 

978-0-87849-436-1, 2007, 980 pp, US$411.00/€298.00 

Advanced Ceramic Materials 

978-0-87849-745-4, 1996, 590 pp, US$326.00/€236.00 

Advanced Ceramic Tools for Machining Application - I 

978-0-87849-684-6, 1994, 272 pp, US$160.00/€116.00 

Advanced Ceramic Tools for Machining Application - II 

978-0-87849-703-4, 1996, 284 pp, US$160.00/€116.00 

Advanced Ceramic Tools for Machining Application - III 

978-0-87849-768-3, 1998, 696 pp, US$326.00/€236.00 

Advanced Ceramics 

978-0-87849-547-4, 1991, 566 pp, US$276.00/€200.00 

Advanced Ceramics and Composites 

978-0-87849-924-3, 2003, 492 pp, US$232.00/€168.00 

Advanced Ceramics for Use in Highly Oxidizing and Corrosive 

Environment 

978-0-87849-870-3, 2001, 250 pp, US$127.00/€92.00 

Advanced Design and Manufacture II 

978-0-87849-310-4, 2010, 900 pp, US$412.00/€298.00 

Advanced Inorganic Fibrous Composites V 

978-3-908158-06-6, 2006, 202 pp, US$135.00/€98.00 

Advanced Manufacture 2007 

978-0-87849-360-9, 2008, 522 pp, US$276.00/€200.00 

Advanced Materials and Processes 

978-0-87849-812-3, 1998, 380 pp, US$221.00/€.00 

Advanced Materials and Processing 

978-0-87849-463-7, 2007, 1450 pp, US$273.00/€198.00 

Advanced Materials and Processing IV 

978-0-87849-466-8, 2007, 394 pp, US$233.00/€169.00 

Advanced Materials and Technologies 

978-0-87849-400-2, 2006, 182 pp, US$135.00/€99.00 

Advanced Materials for High Technology Applications 

978-0-87849-731-7, 1996, 288 pp, US$144.00/€104.00 

Advanced Materials Forum I 

978-0-87849-905-2, 2002, 680 pp, US$330.00/€239.00 

Advanced Materials Forum II 

978-0-87849-941-0, 2004, 890 pp, US$273.00/€198.00 

Advanced Materials Forum III 

978-0-87849-402-6, 2006, 1840 pp, US$549.00/€398.00 

Advanced Materials Forum IV 

978-0-87849-373-9, 2008, 1060 pp, US$434.00/€314.00 

Advanced Materials Processing II 

978-0-87849-921-2, 2003, 540 pp, US$269.00/€195.00 

Advanced Materials Science and Technology 

978-0-87849-335-7, 2009, 306 pp, US$207.00/€150.00 

Advanced Nondestructive Evaluation I 

978-0-87849-412-5, 2006, 1870 pp, US$549.00/€398.00 

Advanced Powder Technology 

978-0-87849-825-3, 1999, 520 pp, US$242.00/€175.00 

Advanced Powder Technology II 

978-0-87849-864-2, 2001, 702 pp, US$331.00/€240.00 

Advanced Powder Technology III 

978-0-87849-912-0, 2003, 788 pp, US$341.00/€247.00 

Advanced Powder Technology IV 

978-0-87849-984-7, 2005, 776 pp, US$341.00/€247.00 

Advanced Powder Technology V 

978-0-87849-423-1, 2006, 770 pp, US$370.00/€268.00 

Advanced Powder Technology VI 

978-0-87849-362-3, 2008, 918 pp, US$198.00/€273.00 

Advanced Si-Based Ceramics and Composites 

978-0-87849-965-6, 2005, 520 pp, US$273.00/€198.00 

Advanced Structural and Functional Materials Design 

978-0-87849-996-0, 2006, 420 pp, US$273.00/€198.00 

Advanced Structural and Functional Materials for Protection 

978-3-908451-50-1, 2008, 216 pp, US$152.00/€110.00 

Advanced Structural Materials 

978-0-87849-930-4, 2003, 150 pp, US$135.00/€98.00 

Advanced Structural Materials II 

978-0-87849-993-9, 2006, 226 pp, US$135.00/€98.00 

Advanced Structural Materials III 

978-0-87849-446-0, 2007, 160 pp, US$135.00/€99.00 

Advanced Synthesis and Processing Technology for Materials 

978-0-87849-329-6, 2009, 306 pp, US$200.00/€145.00 

Advanced Techniques for Materials Characterization 

978-0-87849-379-1, 2009, 514 pp, US$269.00/€195.00 

Advanced Welding and Micro Joining / 

Packaging for the 21st Century 

978-0-87849-383-8, 2008, 720 pp, US$346.00/€251.00 

Advances in Abrasive Processes 

978-0-87849-878-9, 2001, 512 pp, US$218.00/€158.00 

Advances in Abrasive Technology IX 

978-0-87849-416-3, 2007, 820 pp, US$366.00/€265.00 

Advances in Abrasive Technology V 

978-0-87849-910-6, 2003, 426 pp, US$228.00/€165.00 

Advances in Abrasive Technology VI 

978-0-87849-933-5, 2004, 602 pp, US$269.00/€195.00 

Advances in Abrasive Technology VIII 

978-0-87849-974-8, 2005, 700 pp, US$273.00/€198.00 

Advances in Abrasive Technology XI 

978-0-87849-364-7, 2009, 544 pp, US$276.00/€200.00 

Advances in Abrasive Technology XII 

978-0-87849-314-2, 2009, 752 pp, US$366.00/€265.00 

Advances in Ceramic Materials 

978-0-87849-350-0, 2009, 160 pp, US$138.00/€100.00 

Advances in Composite Materials and Structures 

978-0-87849-427-9, 2007, 1360 pp, US$509.00/€369.00 

Advances in Concrete and Structures 

978-0-87849-349-4, 2009, 992 pp, US$412.00/€298.00 

Advances in Corrosion-Deformation Interactions 

978-0-87849-707-2, 1995, 188 pp, US$126.00/€91.00 

Advances in Crystal Growth 

978-0-87849-718-8, 1996, 336 pp, US$160.00/€116.00 

Advances in Electronic Materials 

978-0-87849-347-0, 2009, 214 pp, US$166.00/€120.00 

Advances in Engineering Materials 

978-0-87849-690-7, 1995, 406 pp, US$253.00/€183.00 


Advances in Engineering Plasticity 

978-0-87849-857-4, 2000, 856 pp, US$431.00/€312.00 

Advances in Engineering Plasticity and Its Applications 

978-0-87849-951-9, 2004, 1230 pp, US$435.00/€315.00 

Advances in Experimental Mechanics 

978-0-87849-955-7, 2004, 280 pp, US$232.00/€168.00 

Advances in Experimental Mechanics IV 

978-0-87849-987-8, 2005, 460 pp, US$273.00/€198.00 

Advances in Experimental Mechanics V 

978-0-87849-453-8, 2007, 320 pp, US$232.00/€168.00 

Advances in Experimental Mechanics VI 

978-0-87849-367-8, 2008, 318 pp, US$232.00/€168.00 

Advances in Fracture and Damage Mechanics 

978-0-87849-929-8, 2003, 514 pp, US$232.00/€168.00 

Advances in Fracture and Damage Mechanics VII 

978-0-87849-369-2, 2008, 922 pp, US$412.00/€298.00 

Advances in Fracture and Damage Mechanics VIII 

978-0-87849-315-9, 2010, 994 pp, US$414.00/€300.00 

Advances in Fracture and Failure Prevention 

978-0-87849-938-0, 2004, 1754 pp, US$535.00/€388.00 

Advances in Fracture and Materials Behavior 

978-0-87849-399-9, 2008, 1554 pp, US$540.00/€391.00 

Advances in Fracture and Strength 

978-0-87849-978-6, 2005, 3000 pp, US$821.00/€595.00 

Advances in Grinding and Abrasive Processes 

978-0-87849-934-2, 2004, 902 pp, US$370.00/€268.00 

Advances in Grinding and Abrasive Technology XIII 

978-0-87849-986-1, 2006, 620 pp, US$273.00/€198.00 

Advances in Grinding and Abrasive Technology XIV 

978-0-87849-459-0, 2008, 600 pp, US$273.00/€198.00 

Advances in Grinding and Abrasive Technology XV 

978-0-87849-313-5, 2009, 648 pp, US$276.00/€200.00 

Advances in High-Tc Superconductors 

978-0-87849-667-9, 1993, 802 pp, US$367.00/€266.00 

Advances in Light Emitting Materials 

978-0-87849-358-6, 2008, 288 pp, US$230.00/€167.00 

Advances in Machining & Manufacturing Technology IX 

978-0-87849-396-8, 2008, 750 pp, US$366.00/€265.00 

Advances in Machining & Manufacturing Technology VIII 

978-0-87849-999-1, 2006, 900 pp, US$366.00/€265.00 

Advances in Materials and Systems Technologies 

978-0-87849-450-7, 2007, 590 pp, US$232.00/€168.00 

Advances in Materials and Systems Technologies II 

978-0-87849-337-1, 2009, 910 pp, US$386.00/€280.00 

Advances in Materials Manufacturing Science and Technology 

978-0-87849-956-4, 2004, 930 pp, US$411.00/€298.00 

Advances in Materials Manufacturing Science 

and Technology II 

978-0-87849-421-7, 2007, 1200 pp, US$435.00/€315.00 


and Technology XIII/I 

978-0-87849-311-1, 2009, 842 pp, US$366.00/€265.00 


and Technology XIII/II 

978-0-87849-312-8, 2009, 764 pp, US$366.00/€265.00 

Advances in Materials Processing Technologies 

978-0-87849-417-0, 2006, 250 pp, US$135.00/€99.00 

Advances in Materials Science of Wood 

978-0-87849-354-8, 2009, 184 pp, US$138.00/€100.00 

Current Publications (alphabetically) 



Advances in Metal Matrix Composites 

978-0-87849-652-5, 1993, 400 pp, US$253.00/€183.00 

Advances in Nanocrystallization 

978-0-87849-829-1, 1999, 250 pp, US$110.00/€80.00 

Advances in Nanomaterials and Processin 

978-3-908451-31-0, 2007, 1985 pp, US$646.00/€468.00 

Advances in Nondestructive Evaluation 

978-0-87849-948-9, 2004, 2524 pp, US$647.00/€469.00 

Advances in Optics Design and Precision 

Manufacturing Technologies 

978-0-87849-458-3, 2008, 1386 pp, US$494.00/€358.00 

Advances in Organic Light-Emitting Device 

978-0-87849-483-5, 2008, 140 pp, US$116.00/€84.00 

Advances in Safety and Structural Integrity 

978-3-908451-15-0, 2006, 300 pp, US$218.00/€158.00 

Advances in Semiconducting Materials 

978-0-87849-323-4, 2009, 194 pp, US$138.00/€100.00 

Advances in Shape Memory Materials 

978-0-87849-381-4, 2008, 302 pp, US$230.00/€167.00 

Advances in Strength of Materials 

978-0-87849-351-7, 2009, 230 pp, US$180.00/€130.00 

Advances in Surface Research 

3-908044-08-1, 1991, 184 pp, US$138.00/€100.00 

Advances in Understanding the Fatigue Behavior of Materials 

978-0-87849-394-4, 2008, 420 pp, US$273.00/€198.00 

Advances on Extrusion Technology and Simulation 

of Light Alloys 

978-0-87849-467-5, 2008, 242 pp, US$177.00/€128.00 

Age-Hardenable Aluminium Alloys 

978-0-87849-554-2, 1987, 600 pp, US$276.00/€200.00 

AICAM 2005 

978-0-87849-407-1, 2006, 790 pp, US$366.00/€265.00 

Aluminium Alloys 1996 

978-0-87849-758-4, 1997, 2354 pp, US$787.00/€570.00 


978-0-87849-853-6, 2000, 1910 pp, US$753.00/€546.00 


978-0-87849-899-4, 2002, 1800 pp, US$753.00/€628.00 

Aluminium Cast House Technology XI 

978-0-87849-316-6, 2010, 272 pp, US$177.00/€128.00 

Aluminum Alloys 2006 

978-0-87849-408-8, 2006, 2100 pp, US$753.00/€546.00 

Amorphous Metallic Materials II 

978-0-87849-601-3, 1990, 480 pp, US$264.00/€191.00 

Amorphous Metallic Materials III 

978-0-87849-655-6, 1993, 712 pp, US$356.00/€258.00 

Application of Positron Spectroscopy to Materials Science 

978-3-908450-06-1, 1994, 80 pp, US$109.00/€79.00 

APPLIED CRYSTALLOGRAPHY XX 

978-3-908451-40-2, 2007, 320 pp, US$232.00/€168.00 

Artificial Muscle Actuators using Electroactive Polymers 

978-3-908158-27-1, 2009, 216 pp, US$166.00/€120.00 

Asian Ceramic Science for Electronics I 

978-0-87849-884-0, 2002, 282 pp, US$215.00/€156.00 

Asian Ceramic Science for Electronics II 

& Electroceramics in Japan V 

978-0-87849-902-1, 2002, 335 pp, US$215.00/€156.00 

ASM Heat Treatment and Surface Engineering Conference I 

978-0-87849-642-6, 1992, 932 pp, US$367.00/€266.00 

39


ASM Heat Treatment and Surface Engineering Conference II 

978-0-87849-678-5, 1994, 724 pp, US$345.00/€251.00 

Atomic Migration and Defects in Materials 

3-908044-07-3, 1991, 254 pp, US$160.00/€116.00 

Atomic Structures of High-Tc Superconductors 

978-0-87849-663-1, 1993, 216 pp, US$160.00/€116.00 

Atomic Transport in Liquid Metals 

978-0-87849-541-2, 1986, 354 pp, US$138.00/€100.00 

Band Tailings and Deep Defects in Semiconductors 

978-3-908450-18-4, 1996, 156 pp, US$135.00/€98.00 

Beam Injection Assessment of Defects in Semiconductors 

978-3-908450-39-9, 1998, 550 pp, US$243.00/€176.00 

Beam Injection Assessment of Microstructures 


978-3-908450-61-0, 2001, 522 pp, US$270.00/€196.00 

Beta-Aluminas and Beta Batteries 

978-0-87849-549-8, 1991, 408 pp, US$236.00/€171.00 

Bioceramics 

Applications of Ceramic and Glass Materials in Medicine 

978-0-87849-822-2, 1999, 120 pp, US$124.00/€90.00 


978-0-87849-866-6, 2001, 1120 pp, US$431.00/€312.00 


978-0-87849-889-5, 2002, 704 pp, US$328.00/€238.00 


978-0-87849-911-3, 2003, 1010 pp, US$344.00/€249.00 


978-0-87849-932-8, 2004, 1166 pp, US$435.00/€315.00 


978-0-87849-961-8, 2005, 1120 pp, US$435.00/€315.00 


978-0-87849-992-2, 2006, 1520 pp, US$479.00/€347.00 


978-0-87849-422-4, 2007, 1512 pp, US$479.00/€347.00 


978-0-87849-457-6, 2008, 1428 pp, US$494.00/€358.00 


978-0-87849-353-1, 2009, 758 pp, US$414.00/€300.00 


978-0-87849-452-1, 2007, 680 pp, US$232.00/€168.00 


978-0-87849-322-7, 2009, 782 pp, US$272.00/€197.00 

Biomaterials and Biomedical Engineering 

978-0-87849-480-4, 2008, 560 pp, US$269.00/€195.00 

Biomedical Applications of Nano Technologies 

978-3-908158-09-7, 2006, 146 pp, US$135.00/€98.00 

Biomedical Applications of Smart Materials 

978-3-908158-23-3, 2009, 280 pp, US$166.00/€120.00 

Bulk Amorphous Alloys 

Preparation and Fundamental Characteristics 

978-0-87849-795-9, 1998, 124 pp, US$66.00/€48.00 

Bulk Amorphous Alloys 

Practical Characteristics and Applications 

978-0-87849-830-7, 1999, 160 pp, US$66.00/€48.00 

Bulk and Graded Nanometals 

978-3-908451-02-0, 2005, 364 pp, US$246.00/€178.00 

Calcium Phosphate Based Bioceramics for 

Bone Tissue Engineering 

978-0-87849-380-7, 2008, 170 pp, US$116.00/€84.00 

Carbon-Containing Layers on Silicon 

Growth, Properties and Applications 

978-0-87849-834-5, 1999, 88 pp, US$66.00/€48.00 

Catastrophe Theory and Phase Transitions 

978-3-908450-01-6, 1993, 232 pp, US$160.00/€116.00 

Cellular Metals and Polymers 2004 

978-0-87849-491-0, 2005, 300 pp, US$218.00/€158.00 

Ceramic and Metal Matrix Composites 

978-0-87849-753-9, 1997, 1352 pp, US$570.00/€413.00 

Ceramic Heritage 

978-0-87849-765-2, 1997, 82 pp, US$66.00/€48.00 

Ceramic Interfaces: Properties and Applications V 

978-0-87849-931-1, 2003, 317 pp, US$218.00/€158.00 

Ceramic Matrix Composites 

978-0-87849-698-3, 1995, 528 pp, US$345.00/€251.00 

Chaos and Stability in Defect Processes in Semiconductors 

978-0-87849-650-1, 1992, 212 pp, US$160.00/€116.00 

Chemistry of Interfaces 

978-0-87849-567-2, 1988, 600 pp, US$276.00/€200.00 

Cluster Assembled Materials 

978-0-87849-747-8, 1996, 308 pp, US$132.00/€96.00 

Complet set of PRICM 6 

Part 1-4 

978-0-87849-464-4, 2007, 4000 pp, US$822.00/€595.00 

Complete print set of CIMTEC 2008 

978-3-908158-28-8, 2009, 2562 pp, US$966.00/€700.00 

Complete set of THERMEC 2006 

978-0-87849-445-3, 2007, 6660 pp, US$959.00/€695.00 

Composite Materials for Electronic Functions 

978-0-87849-836-9, 2000, 88 pp, US$66.00/€48.00 

Composite Materials III 

978-0-87849-926-7, 2003, 516 pp, US$232.00/€168.00 

Composite Materials IV 

978-0-87849-997-7, 2006, 200 pp, US$135.00/€98.00 

Composite Materials V 

978-0-87849-451-4, 2007, 270 pp, US$177.00/€128.00 

Compound Semiconductor Strained-Layer Superlattices 

978-0-87849-587-0, 1989, 238 pp, US$112.00/€81.00 

Conducting Polymers 

Transport Phenomena 

978-0-87849-659-4, 1993, 278 pp, US$138.00/€100.00 

Conducting Polymers 

Electrochemistry 

3-908044-10-3, 1991, 394 pp, US$264.00/€191.00 

Contemporary Studies in Advanced Materials and Processes 

978-0-87849-904-5, 2003, 290 pp, US$150.00/€109.00 

Contemporary Studies in Condensed Matter Physics 

978-3-908450-34-4, 1998, 384 pp, US$246.00/€178.00 

Continuum Models of Discrete Systems 

978-0-87849-657-0, 1993, 752 pp, US$367.00/€266.00 

Corrosion in the Military II 

978-0-87849-390-6, 2008, 342 pp, US$246.00/€178.00 

Corrosion of Advanced Ceramics 

978-0-87849-696-9, 1996, 256 pp, US$138.00/€100.00 

Creation of High-Strength Structures and Joints by Setting up 

Local Material Properties 

978-0-87849-455-2, 2007, 150 pp, US$135.00/€99.00 

Creep and Fracture of Engineering Materials and Structures 

978-0-87849-842-0, 2000, 888 pp, US$435.00/€315.00 


Cross-Disciplinary Applied Research in Materials Science and 

Technology 

978-0-87849-962-5, 2005, 672 pp, US$273.00/€198.00 

Crystal Growth 

978-0-87849-545-0, 1991, 932 pp, US$460.00/€333.00 

Crystalline Materials 

Growth and Characterization 

978-0-87849-543-6, 1991, 240 pp, US$138.00/€100.00 

Current Research in Advanced Materials and Processes 

978-0-87849-971-7, 2005, 694 pp, US$273.00/€198.00 

Damage Assessment of Structures 2001 

978-0-87849-879-6, 2001, 486 pp, US$218.00/€158.00 


978-0-87849-922-9, 2003, 600 pp, US$269.00/€195.00 


978-0-87849-839-0, 1999, 456 pp, US$215.00/€156.00 

Damage Assessment of Structures VI 

978-0-87849-976-2, 2005, 820 pp, US$366.00/€0.00 

Damage Assessment of Structures VII 

978-0-87849-444-6, 2007, 800 pp, US$370.00/€268.00 

Damage Assessment of Structures VIII 

978-0-87849-324-1, 2009, 846 pp, US$370.00/€268.00 

Data Compilation: Diffusion in Ferrous Alloys 

978-3-908451-32-7, 2006, 226 pp, US$135.00/€98.00 

Data Compilation: Diffusion in Non-Ferrous Alloys 

978-3-908451-34-1, 2006, 522 pp, US$410.00/€296.00 

Defect Interaction and Clustering in Semiconductors 

978-3-908450-65-8, 2002, 370 pp, US$243.00/€176.00 

Defects and Diffusion in Ceramics 

978-3-908451-28-0, 2006, 320 pp, US$246.00/€178.00 

Defects and Diffusion in Ceramics I 

978-3-908450-37-5, 1998, 228 pp, US$132.00/€96.00 

Defects and Diffusion in Ceramics II 

978-3-908450-50-4, 2000, 368 pp, US$243.00/€176.00 

Defects and Diffusion in Ceramics III 

978-3-908450-56-6, 2000, 390 pp, US$243.00/€176.00 

Defects and Diffusion in Ceramics IV 

978-3-908450-70-2, 2002, 432 pp, US$243.00/€176.00 

Defects and Diffusion in Ceramics IX 

978-3-908451-47-1, 2007, 260 pp, US$166.00/€120.00 

Defects and Diffusion in Ceramics V 

978-3-908450-81-8, 2003, 456 pp, US$370.00/€268.00 

Defects and Diffusion in Ceramics VI 

978-3-908451-00-6, 2004, 508 pp, US$370.00/€268.00 

Defects and Diffusion in Ceramics VII 

978-3-908451-14-3, 2005, 572 pp, US$370.00/€268.00 

Defects and Diffusion in Ceramics X 

978-3-908451-62-4, 2008, 410 pp, US$272.00/€197.00 

Defects and Diffusion in Halides and Ice 

978-3-908451-03-7, 2004, 186 pp, US$135.00/€98.00 

Defects and Diffusion in II-VI Compounds 

978-3-908450-48-1, 1999, 380 pp, US$243.00/€176.00 


978-3-908451-58-7, 2008, 288 pp, US$138.00/€100.00 


978-3-908450-41-2, 1999, 480 pp, US$243.00/€176.00 

Defects and Diffusion in Metals II 

978-3-908450-49-8, 1999, 296 pp, US$243.00/€176.00 




Defects and Diffusion in Metals III 

978-3-908450-58-0, 2001, 510 pp, US$364.00/€264.00 

Defects and Diffusion in Metals IV 

978-3-908450-69-6, 2002, 558 pp, US$371.00/€269.00 

Defects and Diffusion in Metals IX 

978-3-908451-42-6, 2007, 230 pp, US$135.00/€98.00 

Defects and Diffusion in Metals V 

978-3-908450-75-7, 2003, 484 pp, US$370.00/€268.00 

Defects and Diffusion in Metals VI 

978-3-908450-84-9, 2004, 372 pp, US$246.00/€178.00 

Defects and Diffusion in Metals VII 

978-3-908451-05-1, 2004, 358 pp, US$246.00/€178.00 

Defects and Diffusion in Metals VIII 

978-3-908451-20-4, 2005, 320 pp, US$246.00/€178.00 

Defects and Diffusion in Semiconductors I 

978-3-908450-35-1, 1998, 320 pp, US$243.00/€176.00 

Defects and Diffusion in Semiconductors II 

978-3-908450-46-7, 1999, 336 pp, US$243.00/€176.00 

Defects and Diffusion in Semiconductors III 

978-3-908450-54-2, 2000, 560 pp, US$364.00/€264.00 

Defects and Diffusion in Semiconductors IV 

978-3-908450-67-2, 2002, 500 pp, US$364.00/€264.00 

Defects and Diffusion in Semiconductors IX 

978-3-908451-37-2, 2007, 336 pp, US$246.00/€178.00 

Defects and Diffusion in Semiconductors V 

978-3-908450-73-3, 2002, 458 pp, US$246.00/€178.00 

Defects and Diffusion in Semiconductors VI 

978-3-908450-83-2, 2003, 458 pp, US$370.00/€268.00 

Defects and Diffusion in Semiconductors VII 

978-3-908451-04-4, 2004, 540 pp, US$370.00/€268.00 

Defects and Diffusion in Semiconductors VIII 

978-3-908451-16-7, 2005, 352 pp, US$246.00/€178.00 

Defects and Diffusion in Semiconductors X 

978-3-908451-54-9, 2007, 312 pp, US$208.00/€150.00 

Defects and Diffusion in Semicondutors XI 

978-3-908451-63-1, 2008, 184 pp, US$138.00/€100.00 

Defects in Electronic Ceramics 

978-0-87849-653-2, 1993, 260 pp, US$138.00/€100.00 

Defects in Insulating Materials 

978-0-87849-756-0, 1997, 812 pp, US$386.00/€280.00 

Defects in Semiconductors 14 

978-0-87849-551-1, 1986, 1320 pp, US$552.00/€400.00 


978-0-87849-584-9, 1989, 1506 pp, US$598.00/€433.00 


978-0-87849-628-0, 1992, 1634 pp, US$598.00/€433.00 


978-0-87849-671-6, 1994, 1722 pp, US$598.00/€433.00 


978-0-87849-716-4, 1995, 2268 pp, US$690.00/€500.00 


978-0-87849-786-7, 1997, 1932 pp, US$662.00/€480.00 

Defects in Semiconductors I 

978-0-87849-666-2, 1993, 691 pp, US$391.00/€283.00 

Deformation Processes of Rigid Plastic Materials 

978-0-87849-320-3, 2009, 130 pp, US$113.00/€98.00 

Designing of Interfacial Structures 

978-3-908451-33-4, 2007, 360 pp, US$246.00/€178.00 

41


Designing, Processing and Properties of Advanced 

Engineering Materials 

978-0-87849-939-7, 2004, 1378 pp, US$440.00/€319.00 

Development in Light Metals 

978-0-87849-863-5, 2000, 162 pp, US$110.00/€80.00 

Diamond and Other New Carbon Materials IV 

978-3-908158-04-2, 2006, 182 pp, US$135.00/€98.00 

Diamond Thin Films 

An Emerging Technology: Past, Present and Future 

978-0-87849-949-6, 2004, 112 pp, US$72.00/€52.00 

Diffusion and Defects Studies in Zirconium 

and some of its Alloys 

978-0-87849-942-7, 2004, 91 pp, US$72.00/€52.00 

Diffusion and Diffusional Phase Transformations in Alloys 

978-3-908451-55-6, 2008, 222 pp, US$152.00/€110.00 

Diffusion and Ionic Conduction in Oxides 

Data Compilation 

978-3-908451-52-5, 2007, 460 pp, US$395.00/€268.00 

Diffusion and Reactions 

978-3-908450-51-1, 2000, 276 pp, US$131.00/€95.00 

Diffusion and Reactions: From Basics to Applications 

978-3-908450-08-5, 1995, 320 pp, US$149.00/€108.00 


978-3-908451-41-9, 2007, 186 pp, US$135.00/€98.00 


978-3-908450-16-0, 1996, 356 pp, US$265.00/€192.00 

Diffusion and Thermodynamics of Materials 

978-3-908451-35-8, 2007, 254 pp, US$135.00/€98.00 

Diffusion in Advanced Materials and Processing 

978-3-908451-45-7, 2007, 222 pp, US$135.00/€98.00 

Diffusion in Ceramics 

978-3-908450-45-0, 1999, 388 pp, US$243.00/€176.00 

Diffusion in GaAs and other III-V Semiconductors 

978-3-908450-32-0, 1998, 520 pp, US$368.00/€267.00 

Diffusion in Materials: DIMAT2000 

978-3-908450-60-3, 2001, 1940 pp, US$729.00/€528.00 

Diffusion in Materials: DIMAT2004 

978-3-908451-07-5, 2005, 1400 pp, US$509.00/€368.00 

Diffusion in Materials: Dimat2008 

978-3-908451-72-3, 2009, 812 pp, US$435.00/€315.00 

Diffusion in Materials: DIMAT-92 

978-0-87849-662-4, 1993, 1288 pp, US$518.00/€375.00 

Diffusion in Materials: DIMAT-96 

978-3-908450-20-7, 1997, 1820 pp, US$607.00/€440.00 

Diffusion in Metals and Alloys 

3-908044-03-0, 1990, 1610 pp, US$552.00/€400.00 

Diffusion in Metals and Alloys 

978-0-87849-527-6, 1983, 685 pp, US$287.00/€208.00 

Diffusion in Silicon: 10 Years of Research 

978-3-908450-29-0, 1998, 560 pp, US$375.00/€272.00 

Diffusion in Silicon: 7 Years of Research 

978-3-908451-11-2, 2005, 218 pp, US$135.00/€98.00 


978-0-87849-533-7, 1984, 290 pp, US$131.00/€95.00 


978-3-908451-17-4, 2006, 300 pp, US$218.00/€158.00 

Diffusion in Solids and High Temperature Oxidation of Metals 

978-0-87849-626-6, 1992, 446 pp, US$253.00/€183.00 


Mass Diffusion 

978-3-908451-36-5, 2006, 624 pp, US$328.00/€238.00 


Heat Transfer - Microstructure & Properties 

978-0-87849-438-5, 2007, 280 pp, US$135.00/€99.00 

Diffusion in Solids and Liquids III 

978-3-908451-51-8, 2008, 860 pp, US$435.00/€315.00 

Diffusion in Solids and Liquids IV 

978-3-908451-69-3, 2009, 724 pp, US$435.00/€315.00 

Diffusion in Solids: Unsolved Problems 

978-0-87849-631-0, 1992, 294 pp, US$126.00/€91.00 

Diffusion Processes in High Technology Materials 

978-0-87849-561-0, 1988, 290 pp, US$146.00/€106.00 

Diffusion, Segregation and Stresses in Materials 

978-3-908450-76-4, 2003, 350 pp, US$243.00/€176.00 

Diffusionless Phase Transitions and Related 

Structures in Oxides 

978-0-87849-629-7, 1992, 348 pp, US$166.00/€120.00 

Diffusionless Phase Transitions in Oxides 

978-0-87849-691-4, 1995, 442 pp, US$276.00/€200.00 

Disclosing Materials at the Nanoscale 

978-3-908158-07-3, 2006, 218 pp, US$135.00/€98.00 

Dislocation Theory: 5-Year Ret. 

978-3-908450-52-8, 2000, 352 pp, US$243.00/€176.00 

Dislocations ‘93 

978-3-908450-02-3, 1993, 631 pp, US$298.00/€216.00 

Disordered Materials 

978-0-87849-737-9, 1996, 480 pp, US$257.00/€186.00 

Doped Nanopowders 

978-3-908451-38-9, 2007, 292 pp, US$218.00/€158.00 

Durability and Fracture 

978-0-87849-573-3, 1989, 140 pp, US$91.00/€66.00 

Durable Surfaces 

978-0-87849-869-7, 2001, 244 pp, US$127.00/€92.00 

DX Centers 

978-3-908450-03-0, 1994, 186 pp, US$166.00/€120.00 

Dynamical Processes in Disordered Systems 

978-0-87849-591-7, 1990, 252 pp, US$126.00/€91.00 

Eco-Materials Processing & Design 

978-0-87849-923-6, 2003, 378 pp, US$218.00/€158.00 

Eco-Materials Processing & Design VI 

978-0-87849-966-3, 2005, 698 pp, US$269.00/€195.00 

Eco-Materials Processing & Design VII 

978-0-87849-995-3, 2006, 1200 pp, US$435.00/€315.00 

Eco-materials Processing and Design IX 

978-0-87849-472-9, 2008, 384 pp, US$253.00/€183.00 

Eco-Materials Processing and Design VIII 

978-0-87849-431-6, 2007, 1100 pp, US$435.00/€315.00 

Eco-Materials Processing and Design X 

978-0-87849-325-8, 2009, 820 pp, US$366.00/€265.00 

e-Engineering & Digital Enterprise Technology 

978-0-87849-470-5, 2008, 968 pp, US$411.00/€298.00 

Effect of Iron and Silicon in Aluminium and its Alloys 

978-0-87849-605-1, 1990, 384 pp, US$218.00/€158.00 

Effects of Modes of Formation on the Structure of Glass 

978-0-87849-566-5, 1987, 530 pp, US$258.00/€187.00 

Electrical Properties of Oxide Materials 

978-0-87849-746-1, 1997, 436 pp, US$254.00/€184.00 


Electroceramics in Japan I 

978-0-87849-813-0, 1999, 324 pp, US$218.00/€158.00 

Electroceramics in Japan II 

978-0-87849-840-6, 1999, 300 pp, US$215.00/€156.00 

Electroceramics in Japan III 

978-0-87849-860-4, 2000, 260 pp, US$215.00/€156.00 

Electroceramics in Japan IV 

978-0-87849-883-3, 2002, 174 pp, US$110.00/€80.00 

Electroceramics in Japan VI 

978-0-87849-925-0, 2003, 222 pp, US$150.00/€109.00 

Electroceramics in Japan VII 

978-0-87849-947-2, 2004, 264 pp, US$218.00/€158.00 

Electroceramics in Japan VIII 

978-0-87849-982-3, 2006, 300 pp, US$218.00/€158.00 

Electroceramics in Japan X 

978-0-87849-449-1, 2007, 265 pp, US$218.00/€158.00 

Electroceramics in Japan XI 

978-0-87849-359-3, 2009, 322 pp, US$218.00/€158.00 

Electroceramics in Japan IX 

978-0-87849-411-8, 2006, 300 pp, US$218.00/€158.00 

Electrochemical and Chemical Reactivity 

of Amorphous and Nanocrystalline Materials 

978-0-87849-881-9, 2001, 120 pp, US$108.00/€78.00 

Electrochemical Methods in Corrosion 

978-0-87849-760-7, 1997, 160 pp, US$110.00/€80.00 

Electrochemical Methods in Corrosion Research II 

978-0-87849-550-4, 1986, 644 pp, US$258.00/€187.00 

Electrochemical Methods in Corrosion Research III 

978-0-87849-597-9, 1989, 490 pp, US$258.00/€187.00 

Electrochemical Methods in Corrosion Research IV 

978-0-87849-645-7, 1992, 710 pp, US$269.00/€195.00 

Electrochemical Methods in Corrosion Research V 

978-0-87849-702-7, 1995, 968 pp, US$414.00/€300.00 

Electrochemical Methods in Corrosion Research VI 

978-0-87849-819-2, 1998, 1380 pp, US$435.00/€315.00 

Electrochemical Technology of Molten Salts 

978-0-87849-669-3, 1993, 442 pp, US$276.00/€200.00 

Electrochemistry and physical chemical methods in serving 

materials for sustainable development 

978-0-87849-317-3, 2009, 90 pp, US$125.00/€91.00 

Electrochemistry of Conducting Polymers ‘86 

978-0-87849-562-7, 1987, 220 pp, US$138.00/€100.00 

Electrochemistry of Conducting Polymers ‘88 

978-0-87849-585-6, 1989, 260 pp, US$138.00/€100.00 

Electromechanical and Systems Engineering 

978-0-87849-309-8, 2009, 160 pp, US$125.00/€91.00 

Electron Microscopy Applications to Materials Science 

3-908044-01-4, 1989, 350 pp, US$138.00/€153.00 

Electronic Ceramic Materials 

978-0-87849-627-3, 1992, 568 pp, US$253.00/€183.00 

Electronic Structure and Lattice Defects in Alloys 

978-0-87849-560-3, 1989, 328 pp, US$160.00/€116.00 

Electrophoretic Deposition 

978-0-87849-333-3, 2009, 324 pp, US$218.00/€158.00 

Electrophoretic Deposition: Fundamentals and Applications II 

978-0-87849-998-4, 2006, 290 pp, US$218.00/€158.00 

Emboding Intelligence in Structures and Integrated Systems 

978-3-908158-22-6, 2009, 640 pp, US$304.00/€220.00 




Engineered Materials 

978-0-87849-665-5, 1993, 373 pp, US$229.00/€166.00 

Engineering Ceramics: Multifunctional Properties 

978-0-87849-846-8, 2000, 364 pp, US$218.00/€158.00 

Engineering Materials III 

978-0-87849-374-6, 2008, 164 pp, US$135.00/€98.00 

Engineering Plasticity 

from Macroscale to Nanoscale 

978-0-87849-907-6, 2003, 945 pp, US$435.00/€315.00 

Engineering Plasticity and Its Applications 

978-0-87849-433-0, 2007, 1570 pp, US$479.00/€347.00 

Enthalpies in Alloys 

Miedema’s Semi-Empirical Model 

978-0-87849-783-6, 1998, 92 pp, US$66.00/€48.00 

Environmental Ecology and Technology of Concrete 

978-0-87849-983-0, 2006, 750 pp, US$345.00/€250.00 

Epitaxial Crystal Growth 

978-0-87849-616-7, 1991, 1010 pp, US$436.00/€316.00 

Erosion of Ceramic Materials 

978-0-87849-637-2, 1992, 220 pp, US$126.00/€91.00 

Euro Ceramics V 

978-0-87849-761-4, 1997, 2572 pp, US$607.00/€440.00 

Euro Ceramics VII 

978-0-87849-882-6, 2002, 2320 pp, US$861.00/€624.00 

Euro Ceramics VIII 

978-0-87849-946-5, 2004, 2700 pp, US$821.00/€595.00 

European Magnetic Materials and Applications 

978-0-87849-880-2, 2001, 860 pp, US$431.00/€312.00 

European Powder Diffraction 1 

978-0-87849-634-1, 1991, 1020 pp, US$483.00/€350.00 


978-0-87849-661-7, 1993, 1012 pp, US$483.00/€350.00 


978-0-87849-682-2, 1994, 866 pp, US$483.00/€350.00 


978-0-87849-742-3, 1996, 988 pp, US$483.00/€350.00 


978-0-87849-807-9, 1998, 1008 pp, US$483.00/€350.00 


978-0-87849-847-5, 2000, 1232 pp, US$483.00/€350.00 


978-0-87849-886-4, 2001, 880 pp, US$435.00/€315.00 


978-0-87849-935-9, 2004, 440 pp, US$246.00/€178.00 

Experimental Mechanics in Nano and Biotechnology 

978-0-87849-415-6, 2006, 1920 pp, US$549.00/€398.00 

Experimental Techniques and Design in Composite Materials 3 

978-0-87849-778-2, 1998, 316 pp, US$135.00/€98.00 

Experimental Techniques and Design in Composite Materials 5 

978-0-87849-891-8, 2002, 408 pp, US$218.00/€158.00 


Phenomena in Materials 

978-0-87849-950-2, 2004, 490 pp, US$273.00/€198.00 


Phenomena in Materials II 

978-0-87849-465-1, 2008, 400 pp, US$246.00/€178.00 

External and Internal Surfaces in Metal Oxides 

978-0-87849-542-9, 1988, 320 pp, US$160.00/€116.00 

43


Fatigue Data Handbook 

978-0-87849-803-1, 1998, 352 pp, US$138.00/€100.00 

Fatigue Strength Calculation 

978-0-87849-536-8, 1988, 478 pp, US$160.00/€116.00 

Ferrites 

978-0-87849-595-5, 1989, 1280 pp, US$505.00/€366.00 

Ferroelectric Polymers and Ceramic-Polymer Composites 

978-0-87849-674-7, 1994, 352 pp, US$229.00/€166.00 

Ferromagnetic Shape Memory Alloys 

978-0-87849-370-8, 2008, 250 pp, US$152.00/€110.00 

Ferrous Alloy Weldments 

978-0-87849-544-3, 1992, 422 pp, US$253.00/€183.00 

Flexible Manufacture of Lightweight Frame Structures 

978-0-87849-403-3, 2006, 200 pp, US$135.00/€99.00 

Flexible Manufacture of Lightweight Frame Structures 

Phase II: Integration 

978-0-87849-385-2, 2008, 186 pp, US$138.00/€100.00 

Formation of Silicon Nitride 

From the 19th to the 21st Century 

978-0-87849-492-7, 2005, 960 pp, US$273.00/€198.00 

Fractography of Advanced Ceramics 

978-0-87849-893-2, 2002, 294 pp, US$109.00/€79.00 

Fractography of Advanced Ceramics II 

978-0-87849-973-1, 2005, 420 pp, US$246.00/€178.00 

Fractography of Advanced Ceramics III 

978-0-87849-332-6, 2009, 428 pp, US$263.00/€190.00 

Fracture and Damage Mechanics V 

978-0-87849-413-2, 2006, 1400 pp, US$509.00/€369.00 

Fracture and Damage Mechanics VI 

978-0-87849-448-4, 2007, 1002 pp, US$411.00/€298.00 

Fracture and Strength ‘90 

978-0-87849-618-1, 1991, 576 pp, US$322.00/€233.00 

Fracture and Strength of Solids 

978-0-87849-780-5, 1998, 1252 pp, US$544.00/€394.00 

Fracture and Strength of Solids 

978-0-87849-861-1, 2000, 1434 pp, US$538.00/€390.00 

Fracture and Strength of Solids VI 

978-0-87849-989-2, 2006, 1600 pp, US$479.00/€347.00 

Fracture of Composites 

978-0-87849-725-6, 1996, 612 pp, US$229.00/€166.00 

Fracture of Materials 

Moving Forwards 

978-0-87849-994-6, 2006, 400 pp, US$273.00/€198.00 

From Nanopowders to Functional Materials 

978-3-908451-10-5, 2005, 200 pp, US$135.00/€98.00 

Frontiers for Engineering Materials 

978-0-87849-723-2, 1996, 376 pp, US$253.00/€183.00 

Frontiers in Materials Science and Technology 

978-0-87849-475-0, 2008, 306 pp, US$246.00/€178.00 

Functional Biomaterials 

978-0-87849-871-0, 2001, 324 pp, US$215.00/€156.00 

Functional Materials and Devices 

978-0-87849-404-0, 2006, 320 pp, US$232.00/€168.00 

Functional Nanomaterials for Optoelectronics 

and other Applications 

978-3-908451-01-3, 2004, 310 pp, US$246.00/€178.00 

Functionally Graded Materials 

978-0-87849-833-8, 1999, 1092 pp, US$442.00/€320.00 

Functionally Graded Materials VII 

978-0-87849-915-1, 2003, 850 pp, US$410.00/€314.00 

Functionally Graded Materials VIII 

978-0-87849-970-0, 2005, 814 pp, US$435.00/€315.00 

Fundamentals of Deformation and Annealing 

978-0-87849-434-7, 2007, 670 pp, US$273.00/€198.00 

Fundamentals of Solidification 

978-0-87849-804-8, 1998, 316 pp, US$99.00/€72.00 

Gallium Arsenide II 

978-0-87849-555-9, 1987, 374 pp, US$184.00/€133.00 

Gallium Arsenide III 

978-0-87849-586-3, 1989, 380 pp, US$184.00/€133.00 


Semiconductor Technology 2001 

978-3-908450-64-1, 2002, 850 pp, US$364.00/€264.00 



978-3-908450-82-5, 2004, 704 pp, US$269.00/€195.00 



3-908044-04-9, 1989, 620 pp, US$276.00/€200.00 



978-0-87849-568-9, 1991, 660 pp, US$276.00/€200.00 



978-3-908450-11-5, 1996, 640 pp, US$298.00/€216.00 



978-3-908450-27-6, 1997, 556 pp, US$270.00/€196.00 



978-3-908450-47-4, 1999, 628 pp, US$270.00/€196.00 


Semiconductor Technology XI 

978-3-908451-13-6, 2005, 830 pp, US$367.00/€266.00 


Semiconductor Technology XII 

978-3-908451-43-3, 2008, 648 pp, US$367.00/€266.00 


Semiconductor Technology XIII 

978-3-908451-74-7, 2010, 610 pp, US$367.00/€266.00 

Glass – The Challenge for the 21st Century 

978-0-87849-387-6, 2008, 706 pp, US$318.00/€230.00 

Grain Boundary Chemistry and Intergranular Fracture 

978-0-87849-588-7, 1989, 374 pp, US$184.00/€133.00 

Grain Boundary Diffusion and Grain Boundary Segregation 

978-3-908450-31-3, 1998, 292 pp, US$135.00/€98.00 

Grain Growth in Polycrystalline Materials I 

978-0-87849-640-2, 1992, 930 pp, US$391.00/€283.00 

Grain Growth in Polycrystalline Materials II 

978-0-87849-719-5, 1996, 820 pp, US$391.00/€283.00 

Growth and Characterization of Acousto-Optic Materials 

978-0-87849-611-2, 1990, 166 pp, US$138.00/€100.00 

Halide Glasses III 

978-0-87849-540-5, 1985, 840 pp, US$322.00/€233.00 

Halide Glasses IV 

978-0-87849-558-0, 1987, 740 pp, US$322.00/€233.00 


Halide Glasses V 

978-0-87849-583-2, 1988, 670 pp, US$322.00/€233.00 

Halide Glasses VI 

978-0-87849-602-0, 1991, 640 pp, US$322.00/€233.00 

Halides Diffusion-Data Compilation 

978-3-908450-53-5, 2000, 390 pp, US$243.00/€176.00 

Handbook of Diamond Technology 

978-0-87849-835-2, 2000, 680 pp, US$265.00/€192.00 

Heat Treatment of Materials 

978-3-908451-25-9, 2006, 700 pp, US$269.00/€195.00 

HgCdTe System - Reference Guide 

978-3-908451-44-0, 2007, 212 pp, US$135.00/€98.00 

High Damping Materials II 

978-0-87849-406-4, 2006, 260 pp, US$232.00/€168.00 

High Efficiency Silicon Solar Cells 

978-0-87849-537-5, 1987, 240 pp, US$138.00/€100.00 

High Nitrogen Steels 

978-0-87849-843-7, 1999, 868 pp, US$324.00/€235.00 

High Pressure Effects in Chemistry, 

Biology and Materials Science 

978-3-908450-71-9, 2002, 345 pp, US$243.00/€176.00 

High Pressure Explosive Processing of Ceramics 

978-0-87849-546-7, 1987, 410 pp, US$190.00/€138.00 

High Pressure Technology of Nanomaterials 

978-3-908451-22-8, 2006, 410 pp, US$273.00/€198.00 

High Resolution Powder Diffraction 

978-0-87849-553-5, 1986, 144 pp, US$109.00/€79.00 

High Temperature Ceramic Matrix Composites III 

978-0-87849-818-5, 1999, 484 pp, US$228.00/€165.00 

High Temperature Corrosion and Protection of Materials 4 

978-0-87849-774-4, 1997, 1104 pp, US$431.00/€312.00 


978-0-87849-877-2, 2001, 1010 pp, US$435.00/€315.00 


978-0-87849-945-8, 2004, 1270 pp, US$440.00/€319.00 


978-0-87849-366-1, 2008, 1278 pp, US$440.00/€319.00 

High Temperature Corrosion in Molten Salts 

978-0-87849-917-5, 2003, 358 pp, US$218.00/€158.00 

High-Performance Ceramics II 

978-0-87849-897-0, 2002, 860 pp, US$341.00/€247.00 

High-Performance Ceramics III 

978-0-87849-959-5, 2005, 1984 pp, US$537.00/€389.00 

High-Performance Ceramics IV 

978-0-87849-410-1, 2007, 2800 pp, US$753.00/€546.00 

High-Performance Ceramics V 

978-0-87849-473-6, 2008, 2000 pp, US$537.00/€389.00 

High-Temperature Oxidation and Corrosion 2005 

978-0-87849-409-5, 2006, 692 pp, US$273.00/€198.00 

Hydrogen Diffusion in Metals: 30-Year Ret. 

978-3-908450-42-9, 1999, 330 pp, US$246.00/€178.00 

Hydrogen in Compound Semiconductors 

978-0-87849-672-3, 1994, 546 pp, US$276.00/€200.00 

Hydrogen Metal Systems I 

978-3-908450-12-2, 1996, 474 pp, US$276.00/€200.00 

Hydrogen Metal Systems II 

978-3-908450-55-9, 2000, 526 pp, US$364.00/€264.00 

Hydrogen Storage Materials 

978-0-87849-572-6, 1988, 332 pp, US$166.00/€120.00 




Hydrogenated Amorphous Silicon 

978-3-908450-10-8, 1995, 1080 pp, US$391.00/€283.00 

II-VI Compounds and Semimagnetic Semiconductors 

978-0-87849-689-1, 1995, 830 pp, US$367.00/€266.00 

Impact Response and Dynamic Failure of 

Composites and Laminate Materials 

978-0-87849-769-0, 1998, 820 pp, US$326.00/€236.00 

Impurity Diffusion in Metals 

978-3-908450-72-6, 2002, 206 pp, US$108.00/€78.00 

Incommensurate Sandwiched Layered Compounds 

978-0-87849-643-3, 1992, 436 pp, US$242.00/€175.00 

Innovation in Ceramic Science and Engineering 

978-0-87849-454-5, 2007, 334 pp, US$232.00/€168.00 

Innovation in Materials Science 

978-0-87849-389-0, 2008, 250 pp, US$180.00/€130.00 

Inorganic Membranes 

978-0-87849-625-9, 1992, 632 pp, US$242.00/€175.00 

Interaction between defects and anelastic 

phenomena in solids 

978-3-908451-53-2, 2008, 242 pp, US$152.00/€110.00 

Intercalation Compounds 

978-0-87849-639-6, 1992, 880 pp, US$367.00/€266.00 

Interface Segregation and Related Processes in Materials 

978-0-87849-620-4, 1991, 460 pp, US$276.00/€200.00 

Interfaces - Structure and Properties 

978-0-87849-613-6, 1993, 400 pp, US$184.00/€133.00 

Interfaces and Plasticity 

978-3-908450-30-6, 1998, 304 pp, US$254.00/€184.00 

Interfaces II 

978-0-87849-693-8, 1995, 464 pp, US$276.00/€200.00 

Interfaces of Ceramic Materials 

978-0-87849-701-0, 1995, 432 pp, US$276.00/€200.00 

Interfacial Effects and Novel Properties of Nanomaterials 

978-3-908450-80-1, 2003, 393 pp, US$218.00/€158.00 

Interfacial Effects in Particulate, Fibrous 

and Layered Composite Materials 

978-0-87849-710-2, 1996, 384 pp, US$229.00/€166.00 

Intergranular and Interphase Boundaries in Materials 92 

978-0-87849-660-0, 1993, 878 pp, US$373.00/€270.00 


978-0-87849-722-5, 1996, 920 pp, US$391.00/€283.00 


978-0-87849-823-9, 1999, 840 pp, US$331.00/€240.00 

Interlaminar Fracture of Composites 

978-0-87849-590-0, 1989, 358 pp, US$184.00/€133.00 

Internal Friction and Ultrasonic Attenuation in Solids 

including High-Tc Superconductors 

978-0-87849-623-5, 1993, 876 pp, US$391.00/€283.00 

International Ceramic Conference 

978-0-87849-608-2, 1991, 828 pp, US$414.00/€300.00 

Ion Implantation 1988 

978-0-87849-570-2, 1988, 472 pp, US$253.00/€183.00 

Ion Implantation in Semiconductors 

978-0-87849-575-7, 1988, 480 pp, US$276.00/€200.00 

Kinetics and Applications of Atomic Diffusion in Solids 

978-3-908450-23-8, 1997, 216 pp, US$135.00/€98.00 

Lasers in Materials Science 

978-0-87849-826-0, 1999, 300 pp, US$138.00/€100.00 

45


Lattice Theory of Elastic Constants 

978-0-87849-564-1, 1988, 252 pp, US$166.00/€120.00 

Layered, Functional Gradient Ceramics, 

and Thermal Barrier Coatings 

978-0-87849-424-8, 2007, 304 pp, US$218.00/€158.00 

Light Emission from Silicon 

978-3-908450-24-5, 1997, 152 pp, US$124.00/€90.00 

Light Metals Technology 2009 

978-0-87849-327-2, 2009, 670 pp, US$273.00/€198.00 

Light Metals, Aerospace Materials and Superconductors 

978-0-87849-432-3, 2007, 2420 pp, US$647.00/€469.00 

Lithium Iron Phosphate: A Promising Cathode-Active Material 

for Lithium Secondary Batteries 

978-0-87849-477-4, 2008, 140 pp, US$116.00/€84.00 

Local Lattice Rotations and Disclinations in Microstructures 

of Distorted Crystalline Materials 

978-3-908450-68-9, 2002, 318 pp, US$123.00/€89.00 

Low-Carbon High Strength Ferrous Alloys 

978-0-87849-656-3, 1993, 700 pp, US$298.00/€216.00 

Machining of Natural Stone Materials 

978-0-87849-927-4, 2003, 318 pp, US$218.00/€158.00 

Macro-, Meso-, Micro- and Nano-Mechanics of Materials 

978-0-87849-979-3, 2005, 210 pp, US$135.00/€98.00 

Magnesium – Science, Technology and Applications 

978-0-87849-968-7, 2005, 975 pp, US$411.00/€298.00 

Magnesium Alloys 2000 

978-0-87849-862-8, 2000, 380 pp, US$215.00/€156.00 

Magnesium Alloys 2003 

978-0-87849-914-4, 2003, 1090 pp, US$435.00/€315.00 

Magnesium Diboride 

978-3-908451-23-5, 2006, 190 pp, US$135.00/€98.00 

Magnetism and Magnetic Materials 

978-3-908451-68-6, 2009, 618 pp, US$304.00/€220.00 

Magnetism, Magnetic Materials and their Applications 

978-0-87849-827-7, 1999, 510 pp, US$240.00/€174.00 

Manufacturing Automation Technology 

978-0-87849-363-0, 2009, 1074 pp, US$411.00/€298.00 

Martensitic Transformations 

978-0-87849-610-5, 1990, 714 pp, US$333.00/€241.00 

Mass and Charge Transport in Inorganic Materials III 

978-3-908158-02-8, 2006, 210 pp, US$135.00/€98.00 

Materials and Product Technologies 

978-0-87849-376-0, 2008, 950 pp, US$411.00/€298.00 

Materials and Technologies 

978-0-87849-460-6, 2007, 364 pp, US$233.00/€169.00 

Materials for Advanced Technology Applications 

978-0-87849-646-4, 1992, 704 pp, US$380.00/€275.00 

Materials in Clinical Applications VII 

978-3-908158-05-9, 2006, 320 pp, US$232.00/€168.00 

Materials in Transition 

978-3-908451-19-8, 2006, 170 pp, US$135.00/€98.00 

Materials Processing in Space 

978-0-87849-592-4, 1989, 230 pp, US$146.00/€106.00 

Materials Research 

978-0-87849-340-1, 2009, 1450 pp, US$538.00/€390.00 

Materials Science Applications of Ion Beam Techniques 

978-0-87849-767-6, 1997, 512 pp, US$243.00/€176.00 

Materials Science, Testing and Informatics 

978-0-87849-908-3, 2003, 520 pp, US$230.00/€167.00 

Materials Science, Testing and Informatics II 

978-0-87849-426-2, 2007, 750 pp, US$366.00/€265.00 

Materials Science, Testing and Informatics II 

978-0-87849-957-1, 2005, 620 pp, US$273.00/€198.00 

Materials Science, Testing and Informatics IV 

978-0-87849-371-5, 2008, 466 pp, US$276.00/€200.00 

Materials Structure & Micromechanics of Fracture 

978-0-87849-964-9, 2005, 425 pp, US$273.00/€198.00 

Materials Structure & Micromechanics of Fracture V 

978-0-87849-469-9, 2008, 448 pp, US$273.00/€198.00 

Materials under Irradiation 

978-0-87849-651-8, 1992, 512 pp, US$276.00/€200.00 

Maxwell Stresses and Dielectric Materials 

978-0-87849-479-8, 2008, 120 pp, US$116.00/€84.00 

Measurement Technology and Intelligent Instruments VI 

978-0-87849-977-9, 2005, 800 pp, US$341.00/€247.00 

Measurement Technology and Intelligent Instruments VIII 

978-0-87849-382-1, 2008, 674 pp, US$304.00/€220.00 

Mechanical Alloying 

978-0-87849-633-4, 1992, 840 pp, US$345.00/€251.00 

Mechanical Behaviour of Metals at 

Extremely High Strain Rates 

978-0-87849-528-3, 1986, 250 pp, US$138.00/€100.00 

Mechanical Spectroscopy 2001 

978-0-87849-876-5, 2001, 724 pp, US$323.00/€234.00 

Mechanical Spectroscopy II 

978-3-908450-74-0, 2003, 380 pp, US$246.00/€178.00 

Mechanical Spectroscopy III 

978-3-908451-24-2, 2006, 330 pp, US$232.00/€168.00 

Mechanically Alloyed and Nanocrystalline Materials 94 

978-0-87849-688-4, 1995, 890 pp, US$367.00/€266.00 

Mechanically Alloyed, Metastable 

and Nanocrystalline Materials 97 

978-0-87849-799-7, 1998, 1148 pp, US$435.00/€315.00 

MECHANISMS OF HIGH TEMPERATURE CORROSION 

a kinetic approach 

978-0-87849-484-2, 2008, 335 pp, US$152.00/€110.00 

Mechatronic Systems and Materials 

978-3-908451-21-1, 2006, 650 pp, US$273.00/€198.00 

Mechatronic Systems and Materials II 

978-3-908451-60-0, 2009, 310 pp, US$218.00/€158.00 

Mechatronic Systems and Materials III 

978-3-908451-65-5, 2009, 980 pp, US$274.00/€198.00 

Mercury in the Ecosystem 

978-0-87849-529-0, 1986, 340 pp, US$160.00/€116.00 

Metal Matrix Composites 

978-0-87849-697-6, 1995, 928 pp, US$460.00/€333.00 

Metallic and Semiconducting Glasses 

978-0-87849-556-6, 1987, 960 pp, US$436.00/€316.00 

Metallic Glasses: Production, Properties and Applications 

978-0-87849-525-2, 1984, 312 pp, US$138.00/€100.00 

Metallic Multilayers 

978-0-87849-609-9, 1990, 648 pp, US$253.00/€183.00 

Metastable and Nanostructured Materials 2001 

978-0-87849-898-7, 2002, 145 pp, US$110.00/€80.00 

Metastable and Nanostructured Materials II 

978-0-87849-954-0, 2004, 116 pp, US$135.00/€98.00 


Metastable and Nanostructured Materials III 

978-0-87849-474-3, 2008, 174 pp, US$136.00/€99.00 

Metastable, Mechanically Alloyed 


978-0-87849-865-9, 2001, 700 pp, US$323.00/€234.00 



978-0-87849-892-5, 2002, 676 pp, US$323.00/€234.00 



978-0-87849-916-8, 2003, 798 pp, US$366.00/€265.00 



978-0-87849-944-1, 2004, 822 pp, US$366.00/€265.00 



978-0-87849-988-5, 2005, 760 pp, US$366.00/€265.00 



978-0-87849-738-6, 1996, 1012 pp, US$375.00/€272.00 



978-0-87849-838-3, 1999, 688 pp, US$323.00/€234.00 



978-0-87849-858-1, 2000, 1100 pp, US$431.00/€312.00 

Micro and Nano Technology 

978-0-87849-339-5, 2009, 506 pp, US$276.00/€200.00 

Microalloying for New Steel Processes and Applications 

978-0-87849-981-6, 2005, 840 pp, US$366.00/€265.00 

Microalloying in Steels 

978-0-87849-816-1, 1998, 604 pp, US$326.00/€236.00 

Microstructure and Properties of Refractories 

978-0-87849-664-8, 1993, 221 pp, US$138.00/€100.00 

Mining Smartness from Nature 

978-3-908158-24-0, 2009, 290 pp, US$166.00/€120.00 

Modeling of Materials 

978-0-87849-901-4, 2002, 300 pp, US$135.00/€98.00 

Modern Nuclear Methods in Materials Science 

978-0-87849-534-4, 1984, 204 pp, US$109.00/€79.00 

Modern Practice in Stress and Vibration Analysis 

978-0-87849-928-1, 2003, 550 pp, US$246.00/€178.00 

Modern Practice in Stress and Vibration Analysis VI 

978-0-87849-418-7, 2006, 576 pp, US$273.00/€198.00 

Modern Zeolites 

978-0-87849-794-2, 1998, 92 pp, US$66.00/€48.00 

Modified Inorganic Surfaces as a 

Model for Hydroxyapatite Growth 

978-0-87849-489-7, 2006, 136 pp, US$72.00/€52.00 

Molecular Beam Epitaxy 

978-0-87849-614-3, 1991, 210 pp, US$160.00/€116.00 

Molten Salt Chemistry and Technology 

978-0-87849-600-6, 1991, 814 pp, US$367.00/€266.00 

Molten Salt Chemistry and Technology 5 

978-0-87849-805-5, 1998, 656 pp, US$273.00/€198.00 

Multi-functional Materials and Structures 

978-0-87849-378-4, 2008, 1612 pp, US$473.00/€343.00 

Multiscale Kinetic Modelling of Materials 

978-3-908451-39-6, 2007, 174 pp, US$135.00/€98.00 




Nanocomposite Coatings and Nanocomposite Materials 

978-0-87849-346-3, 2009, 400 pp, US$166.00/€120.00 


978-3-908451-67-9, 2009, 280 pp, US$207.00/€150.00 

Nanocomposites and Nanoporous Materials 

978-3-908451-27-3, 2007, 340 pp, US$166.00/€120.00 

Nanocomposites and Nanoporous Materials VIII 

978-3-908451-48-8, 2008, 170 pp, US$136.00/€98.00 

Nanodiffusion 

978-0-87849-494-1, 2004, 190 pp, US$135.00/€99.00 

Nanomaterials and Devices: Processing and Applications 

978-0-87849-328-9, 2009, 312 pp, US$200.00/€145.00 

Nanomaterials by Severe Plastic Deformation 

978-0-87849-985-4, 2006, 1050 pp, US$435.00/€315.00 

Nanomaterials by Severe Plastic Deformation IV 

978-0-87849-375-3, 2008, 1200 pp, US$434.00/€314.00 

Nanomaterials Synthesis and Applications 

978-0-87849-331-9, 2009, 246 pp, US$166.00/€120.00 

Nanophase Materials 

978-0-87849-709-6, 1995, 240 pp, US$146.00/€106.00 

Nanoscience and Technology 

978-3-908451-30-3, 2007, 1610 pp, US$549.00/€398.00 

Nanostructured Materials Processed by SPD 

978-0-87849-384-5, 2008, 166 pp, US$138.00/€100.00 

Nanostructured Silicon for Photonics 

978-0-87849-488-0, 2006, 260 pp, US$144.00/€104.00 

NEMS/MEMS Technology and Devices 

978-0-87849-321-0, 2009, 334 pp, US$218.00/€158.00 

Neutron Scattering - Advances and Applications 

978-0-87849-571-9, 1988, 490 pp, US$253.00/€183.00 

New Frontiers in Materials Processing Training and Learning 

978-0-87849-308-1, 2009, 124 pp, US$124.00/€90.00 

New Frontiers of Process and Engineering 

in Advanced Materials 

978-0-87849-980-9, 2005, 540 pp, US$273.00/€198.00 

New Materials 

978-0-87849-695-2, 1995, 288 pp, US$138.00/€100.00 

New Materials for Extreme Environments 

978-0-87849-344-9, 2009, 344 pp, US$218.00/€158.00 

New Trends in Mechanics and Transport 

978-0-87849-468-2, 2008, 182 pp, US$136.00/€99.00 

Nitrides and Oxynitrides 

978-0-87849-850-5, 2000, 368 pp, US$215.00/€156.00 

Nitrides and Oxynitrides 2 

978-0-87849-887-1, 2002, 220 pp, US$108.00/€78.00 

Nitrides and Oxynitrides III 

978-0-87849-439-2, 2007, 240 pp, US$135.00/€99.00 

Non Linear Phenomena in Materials Science I 

978-0-87849-565-8, 1988, 512 pp, US$253.00/€183.00 

Non Linear Phenomena in Materials Science II 

978-0-87849-635-8, 1992, 520 pp, US$253.00/€183.00 

Non Linear Phenomena in Materials Science III 

978-3-908450-09-2, 1995, 352 pp, US$253.00/€183.00 

Nondestructive Characterization of Materials VII 

978-0-87849-708-9, 1996, 924 pp, US$460.00/€333.00 

Nonequilibrium Materials 

978-0-87849-694-5, 1995, 260 pp, US$138.00/€100.00 

Nonlinearity of Colloid Systems: Oxyhydrate Systems 

978-0-87849-482-8, 2008, 434 pp, US$166.00/€120.00 

47


Non-Metallic Elements in Liquid Metals 

978-0-87849-711-9, 1996, 264 pp, US$160.00/€116.00 

Novel Synthesis and Processing of Ceramics 

978-0-87849-814-7, 1999, 452 pp, US$224.00/€162.00 

Nucleation and the Properties of Undercooled Melts 

978-0-87849-895-6, 2002, 80 pp, US$66.00/€48.00 

Numerical and Experimental Investigation of Hollow Sphere 

Structures in Sandwich Panels 

978-0-87849-398-2, 2008, 136 pp, US$110.00/€80.00 

On the Convergence of Bio-, Information-, Environmental-, 

Energy-, Space- and Nano-Technologies 

978-0-87849-958-8, 2005, 1110 pp, US$411.00/€298.00 

Organization and Information Systems 

978-3-908450-15-3, 1995, 500 pp, US$218.00/€158.00 

Oxides 

978-0-87849-798-0, 1998, 476 pp, US$237.00/€172.00 

Particle Beams & Plasma Interaction on Materials and Ion & 

Plasma Surface Finishing 

978-3-908451-12-9, 2005, 150 pp, US$135.00/€98.00 

Passivation of Metals and Semiconductors 

978-0-87849-692-1, 1995, 1112 pp, US$552.00/€400.00 

Permanent Magnetic Materials and their Applications 

978-0-87849-796-6, 1998, 90 pp, US$66.00/€48.00 

Perspectives of nanoscience and nanotechnology 

978-3-908451-57-0, 2008, 230 pp, US$189.00/€137.00 

Phase Stability and Phase Transformations 

978-0-87849-535-1, 1985, 474 pp, US$253.00/€183.00 

Phase Transformation and Diffusion 

978-3-908451-61-7, 2008, 160 pp, US$138.00/€100.00 

Physical and Numerical Simulation of Materials Processing 

978-0-87849-392-0, 2008, 1570 pp, US$497.00/€360.00 

Physical Chemistry of Solid State Materials 

978-3-908450-05-4, 1994, 694 pp, US$298.00/€216.00 

Physical Metallurgy of Cast Iron V 

978-3-908450-28-3, 1997, 584 pp, US$297.00/€215.00 

Physics and Chemistry of Rare-Earth Ions Doped Glasses 

978-0-87849-481-1, 2008, 300 pp, US$160.00/€120.00 

Physics of DX Centers in GaAs Alloys 

3-908044-05-7, 1990, 310 pp, US$160.00/€116.00 

Physics of Irradiation Effects in Metals 

978-0-87849-641-9, 1992, 820 pp, US$380.00/€275.00 

Plasma Processing and Dusty Particles 

978-0-87849-888-8, 2001, 90 pp, US$108.00/€78.00 

Plasma Properties, Deposition and Etching 

978-0-87849-670-9, 1993, 749 pp, US$367.00/€266.00 

Plastic Deformation and Strain Hardening 

978-0-87849-906-9, 2003, 430 pp, US$199.00/€144.00 

Plasticity of Metals and Alloys 

978-0-87849-687-7, 1994, 526 pp, US$286.00/€207.00 

Polycrystalline Semiconductors III 

978-3-908450-04-7, 1994, 628 pp, US$276.00/€200.00 

Polycrystalline Semiconductors IV 

978-3-908450-19-1, 1996, 656 pp, US$276.00/€200.00 

Polycrystalline Semiconductors V 

978-3-908450-43-6, 1999, 616 pp, US$251.00/€182.00 

Polycrystalline Semiconductors VI 

978-3-908450-63-4, 2001, 490 pp, US$243.00/€176.00 

Polycrystalline Semiconductors VII 

978-3-908450-79-5, 2003, 488 pp, US$246.00/€178.00 

Polymer Blends and Polymer Composites 

978-0-87849-766-9, 1998, 240 pp, US$132.00/€96.00 

Porous Ceramic Materials 

978-0-87849-706-5, 1996, 248 pp, US$138.00/€100.00 

Porous Materials for Tissue Engineering 

978-0-87849-773-7, 1997, 252 pp, US$130.00/€94.00 

Positron and Positronium Chemistry 

978-0-87849-348-7, 2009, 282 pp, US$207.00/€150.00 

Positron Annihilation 10 

978-0-87849-686-0, 1995, 1104 pp, US$505.00/€366.00 


978-0-87849-779-9, 1997, 852 pp, US$359.00/€260.00 


978-0-87849-875-8, 2001, 744 pp, US$323.00/€234.00 


978-0-87849-936-6, 2004, 550 pp, US$246.00/€178.00 


978-0-87849-636-5, 1992, 2146 pp, US$712.00/€516.00 

Positrons at Metallic Surfaces 

978-0-87849-648-8, 1992, 388 pp, US$264.00/€191.00 

Powder Metallurgy 

978-0-87849-419-4, 2007, 1728 pp, US$549.00/€398.00 

Powder Metallurgy and Related High Temperature Materials 

978-0-87849-577-1, 1988, 862 pp, US$436.00/€316.00 

Powder Processing of High-Tc Oxide Superconductors 

978-0-87849-630-3, 1992, 348 pp, US$253.00/€183.00 

Powder Technology and Application 

978-0-87849-352-4, 2009, 244 pp, US$166.00/€120.00 

Precision Die Design 

978-0-87849-151-3, 2009, 252 pp, US$166.00/€120.00 

Precision Machining of Advanced Materials 

978-0-87849-867-3, 2001, 220 pp, US$110.00/€80.00 

Precision Surface Finishing and Deburring Technology 

978-0-87849-461-3, 2007, 400 pp, US$253.00/€183.00 

PRICM 6 

978-0-87849-462-0, 2007, 2600 pp, US$646.00/€468.00 

PRICM-5 

978-0-87849-960-1, 2005, 4560 pp, US$756.00/€548.00 

Principles of Solidification and Materials Processing 

978-0-87849-594-8, 1990, 980 pp, US$460.00/€333.00 

Probabilistic Methods in Fatigue and Fracture 

978-0-87849-872-7, 2001, 264 pp, US$121.00/€88.00 

Processing and Applications of Structural Metals and Alloys 

978-0-87849-355-5, 2009, 442 pp, US$270.00/€196.00 

Progress in Abrasive and Grinding Technology 

978-0-87849-342-5, 2009, 206 pp, US$166.00/€120.00 

Progress in Advanced Materials and Processes 

978-0-87849-940-3, 2004, 600 pp, US$273.00/€198.00 

Progress in Bioceramics 

978-0-87849-395-1, 2008, 284 pp, US$221.00/€160.00 

Progress in Experimental and Computational 

Mechanics in Engineering 

978-0-87849-913-7, 2003, 650 pp, US$269.00/€195.00 

Progress in Fracture and Damage Mechanics 

978-0-87849-377-7, 2008, 132 pp, US$135.00/€98.00 

Progress in High Temperature Ceramics 

978-0-87849-361-6, 2009, 242 pp, US$180.00/€130.00 

Progress in Sol-Gel Production 

978-0-87849-365-4, 2009, 194 pp, US$138.00/€100.00 


Progress in Surface Treatment 

978-0-87849-372-2, 2008, 344 pp, US$248.00/€180.00 

Progress of Machining Technology 

978-0-87849-338-8, 2009, 762 pp, US$366.00/€265.00 

Progress of Precision Engineering and Nano Technology in 

Asia 

978-0-87849-430-9, 2007, 524 pp, US$273.00/€198.00 

Progress on Advanced Manufacture for Micro/Nano 

Technology 2005 

978-0-87849-990-8, 2006, 1380 pp, US$509.00/€369.00 

Progresses in Fracture and Strength of 


978-0-87849-456-9, 2007, 3240 pp, US$676.00/€490.00 

Properties and Characterization of Amorphous Carbon Films 

978-0-87849-604-4, 1990, 714 pp, US$294.00/€213.00 

Quasicrystals 

978-0-87849-559-7, 1987, 660 pp, US$326.00/€236.00 

Quasicrystals and Imperfectly Ordered Crystals 

978-0-87849-673-0, 1994, 510 pp, US$253.00/€183.00 

Radiation Damage in Some Refractory Metals 

978-0-87849-490-3, 2005, 64 pp, US$72.00/€52.00 

Rapid Solidification 

978-0-87849-599-3, 1990, 436 pp, US$225.00/€163.00 

Rapid Thermal Processing and beyond: Applications in 

Semiconductor Processing 

978-0-87849-391-3, 2008, 448 pp, US$273.00/€198.00 

Rapidly Solidified Metals 

978-0-87849-557-3, 1987, 272 pp, US$160.00/€116.00 

Rare Earth Minerals and Minerals for Electronic Uses 

978-0-87849-530-6, 1991, 674 pp, US$338.00/€245.00 

Rare Earths - Applications and Technology 

978-0-87849-576-4, 1988, 320 pp, US$160.00/€116.00 

Rare Earths ‘98 

978-0-87849-841-3, 1999, 624 pp, US$328.00/€238.00 

Rare Elements in Glasses 

978-0-87849-675-4, 1994, 428 pp, US$253.00/€183.00 

Reactive Phase Formation at Interfaces 

and Diffusion Processes 

978-0-87849-680-8, 1994, 596 pp, US$284.00/€206.00 

Recent Developments in Advanced Materials and Processes 

978-0-87849-405-7, 2006, 600 pp, US$246.00/€178.00 

Recrystallization ‘92 

978-0-87849-649-5, 1993, 752 pp, US$380.00/€275.00 

Recrystallization and Grain Growth 

978-0-87849-952-6, 2004, 1472 pp, US$537.00/€389.00 

Recrystallization and Grain Growth III 

978-0-87849-443-9, 2007, 1544 pp, US$573.00/€415.00 

Research Trends in Contemporary Materials Science 

978-0-87849-441-5, 2007, 600 pp, US$273.00/€198.00 

Residual Stresses 5 

978-0-87849-855-0, 2000, 740 pp, US$324.00/€235.00 

Residual Stresses 6 

978-0-87849-900-7, 2002, 962 pp, US$435.00/€315.00 

Residual Stresses VII 

978-0-87849-414-9, 2006, 1000 pp, US$435.00/€315.00 

Residual Stresses VII 

978-0-87849-969-4, 2005, 724 pp, US$345.00/€249.00 

Rules of Thumb for the Physical Scientist 

978-0-87849-524-5, 1988, 320 pp, US$105.00/€76.00 




Safety and Structural Integrity II 

978-3-908451-29-7, 2007, 300 pp, US$218.00/€158.00 

Scanning Probe Microscopies 

978-0-87849-868-0, 2001, 102 pp, US$66.00/€48.00 

Science and Engineering of Novel Superconductors V 

978-3-908158-03-5, 2006, 266 pp, US$218.00/€158.00 

Science and Technology Hybrid Materials 

978-3-908451-18-1, 2006, 204 pp, US$135.00/€98.00 

Science and Technology of Nanomaterials 

978-0-87849-953-3, 2005, 420 pp, US$273.00/€198.00 

Self-Formation Theory and Applications 

978-3-908450-85-6, 2004, 510 pp, US$246.00/€178.00 

Self-Propagating High-Temperature Synthesis 

978-0-87849-885-7, 2002, 236 pp, US$110.00/€80.00 

Semiconductor Materials and Technology 

978-3-908450-25-2, 1997, 260 pp, US$132.00/€96.00 

Semiconductor Photonics: Nano-Structured 

Materials and Devices 

978-0-87849-471-2, 2008, 264 pp, US$166.00/€120.00 

Semiconductor Processing and Characterization with Lasers 

978-0-87849-683-9, 1995, 394 pp, US$229.00/€166.00 

Semiconductor Thermoelectric Generators 

978-0-87849-152-0, 2009, 140 pp, US$110.00/€80.00 

Semi-Solid Processing of Alloys and Composites 

978-3-908451-26-6, 2006, 824 pp, US$366.00/€265.00 

Semi-Solid Processing of Alloys and Composites X 

978-3-908451-59-4, 2008, 814 pp, US$366.00/€265.00 

Shallow Impurities in Semiconductors IV 

978-0-87849-619-8, 1991, 502 pp, US$264.00/€191.00 

Shallow Impurities in Semiconductors V 

978-0-87849-654-9, 1993, 540 pp, US$264.00/€191.00 

Shape Memory Materials and their Applications 

978-0-87849-896-3, 2002, 580 pp, US$246.00/€178.00 


978-0-87849-972-4, 2005, 860 pp, US$366.00/€265.00 


978-0-87849-336-4, 2009, 700 pp, US$346.00/€251.00 

Sheet Metal XII 

978-0-87849-437-8, 2007, 990 pp, US$411.00/€298.00 

SiAlONs 

978-0-87849-909-0, 2003, 274 pp, US$150.00/€109.00 

SiAlONs and Non-oxides 

978-0-87849-345-6, 2009, 280 pp, US$166.00/€120.00 

Silicon Carbide and Related Materials 1999 

978-0-87849-854-3, 2000, 1786 pp, US$549.00/€398.00 


978-0-87849-873-4, 2001, 860 pp, US$435.00/€315.00 


978-0-87849-894-9, 2002, 1760 pp, US$549.00/€398.00 


978-0-87849-920-5, 2003, 1036 pp, US$476.00/€345.00 


978-0-87849-943-4, 2004, 1548 pp, US$482.00/€349.00 


978-0-87849-963-2, 2005, 1148 pp, US$482.00/€349.00 


978-0-87849-425-5, 2006, 1710 pp, US$482.00/€349.00 


978-0-87849-442-2, 2007, 1100 pp, US$477.00/€346.00 

49


Silicon Carbide and Related Materials: ECSCRM2008 

978-0-87849-334-0, 2009, 1030 pp, US$483.00/€350.00 

Silicon Carbide and Related Materials: ICSCRM2007 

978-0-87849-357-9, 2009, 1434 pp, US$482.00/€349.00 

Silicon Carbide, III-Nitrides and Related Materials 

978-0-87849-790-4, 1998, 1606 pp, US$549.00/€398.00 

Silicon Heterojunction Solar Cell 

978-0-87849-486-6, 2006, 208 pp, US$144.00/€104.00 

Silicon Nitride ‘93 

978-0-87849-668-6, 1994, 782 pp, US$338.00/€245.00 

Sintering ‘91 

978-0-87849-638-9, 1992, 680 pp, US$298.00/€216.00 

Sintering Fundamentals 

978-0-87849-318-0, 2009, 152 pp, US$166.00/€120.00 

Sintering of Multiphase Metal and Ceramic Systems 

3-908044-02-2, 1990, 610 pp, US$264.00/€191.00 

Sintering of Systems with Interacting Components 

978-0-87849-150-6, 2009, 290 pp, US$166.00/€120.00 


978-0-87849-356-2, 2008, 1000 pp, US$411.00/€298.00 

Smart Materials & Micro/Nanosystems 

978-3-908158-20-2, 2009, 496 pp, US$304.00/€220.00 

Smart Materials for Smart Devices and Structures 

978-3-908451-70-9, 2009, 214 pp, US$166.00/€120.00 

Smart Optics 

978-3-908158-21-9, 2009, 240 pp, US$166.00/€120.00 

Smart Textiles 

978-3-908158-26-4, 2009, 190 pp, US$166.00/€120.00 

Soft Chemistry leading to Novel Materials 

978-3-908450-59-7, 2001, 140 pp, US$121.00/€88.00 

Soft Chemistry Routes to New Materials 

978-0-87849-677-8, 1994, 422 pp, US$253.00/€183.00 

Sol-Gel Preparation and Characterization of Metal-Silica and 

Metal Oxide-Silica Nanocomposites 

978-0-87849-856-7, 2000, 56 pp, US$66.00/€48.00 

Sol-Gel Production 

978-0-87849-784-3, 1998, 240 pp, US$135.00/€98.00 

Solid Phase Transformations 

978-3-908451-49-5, 2008, 490 pp, US$273.00/€198.00 

Solid Phase Transformations II 

978-3-908451-66-2, 2009, 230 pp, US$166.00/€120.00 

Solid State Chemistry V 

978-3-908450-77-1, 2003, 640 pp, US$269.00/€195.00 

Solidification and Gravity 

978-0-87849-728-7, 1996, 544 pp, US$269.00/€195.00 

Solidification and Gravity 2000 

978-0-87849-852-9, 2000, 556 pp, US$224.00/€162.00 

Solidification and Gravity IV 

978-0-87849-991-5, 2006, 660 pp, US$273.00/€198.00 

Solidification and Microgravity 

978-0-87849-624-2, 1991, 342 pp, US$144.00/€104.00 

Solidification Processing of Reinforced Metals 

978-0-87849-785-0, 1998, 420 pp, US$218.00/€158.00 

Special Defects in Semiconducting Materials 

978-3-908450-44-3, 2000, 284 pp, US$124.00/€90.00 

Spin Injection and Transport in Magnetoelectronics 

978-3-908158-08-0, 2006, 130 pp, US$135.00/€98.00 

State-of-the-art Research and Application 

of SMAs Technologies 

978-3-908158-25-7, 2009, 210 pp, US$166.00/€120.00 

Stochastic Models of Heterogeneous Materials 

978-0-87849-548-1, 1991, 188 pp, US$112.00/€81.00 

Stress evaluation in materials by neutron or synchrotron 

radiation 

978-0-87849-393-7, 2008, 442 pp, US$276.00/€200.00 

Structural Integrity and Failure 

978-0-87849-386-9, 2008, 520 pp, US$276.00/€200.00 

Structure Development in Condensed Matter 

978-3-908450-26-9, 1997, 260 pp, US$130.00/€94.00 

Superplasticity in Advanced Materials 2000 

978-0-87849-874-1, 2001, 660 pp, US$331.00/€240.00 


978-0-87849-435-4, 2007, 680 pp, US$316.00/€229.00 


978-0-87849-937-3, 2004, 566 pp, US$246.00/€178.00 


978-0-87849-759-1, 1997, 808 pp, US$366.00/€265.00 


978-0-87849-685-3, 1994, 824 pp, US$356.00/€258.00 

Surface Coatings for Advanced Materials 

978-0-87849-749-2, 1997, 292 pp, US$121.00/€88.00 

Surface Diffusion and Surface Structure: 10 Years of Res. 

978-3-908450-33-7, 1998, 352 pp, US$246.00/€178.00 

Surface Engineering 

978-0-87849-397-5, 2008, 870 pp, US$381.00/€276.00 

Surface Engineering with High Energy Beams 

978-0-87849-607-5, 1990, 610 pp, US$253.00/€183.00 

Surface Finishing Technology and Surface Engineering 

978-0-87849-368-5, 2008, 450 pp, US$252.00/€183.00 

Surface Layers 

978-0-87849-679-2, 1994, 182 pp, US$144.00/€104.00 

Surface Morphology of Crystalline Solids 

978-0-87849-622-8, 1991, 440 pp, US$269.00/€195.00 

Surface Reconstructions 

978-3-908451-71-6, 2009, 378 pp, US$178.00/€246.00 

Surface Segregation 

3-908044-06-5, 1990, 132 pp, US$131.00/€95.00 

Surfaces and Disorder 

978-0-87849-532-0, 1985, 224 pp, US$109.00/€79.00 

Synthesis and Characterization of High-Tc Superconductors 

978-0-87849-658-7, 1993, 710 pp, US$367.00/€266.00 

Synthesis and Properties of Boron Nitride 

978-0-87849-606-8, 1990, 426 pp, US$242.00/€175.00 

Synthesis and Properties of Mechanically Alloyed 

and Nanocrystalline Materials 

978-0-87849-750-8, 1997, 1076 pp, US$442.00/€320.00 

Synthesis and Properties of Surface Coatings 

978-0-87849-319-7, 2009, 80 pp, US$125.00/€91.00 

Synthesis, Characterization and Properties of Nanostructures 

978-3-908451-73-0, 2009, 202 pp, US$138.00/€100.00 

Synthesis, Processing, and Modelling of Advanced Materials 

978-0-87849-647-1, 1992, 384 pp, US$253.00/€183.00 

Systems with Fast Ionic Transport - III 

978-0-87849-569-6, 1991, 312 pp, US$149.00/€108.00 

Systems with Fast Ionic Transport - IV 

978-3-908450-07-8, 1994, 356 pp, US$276.00/€200.00 


Texture and Anisotropy of Polycrystals 

978-0-87849-802-4, 1998, 736 pp, US$337.00/€244.00 

Texture and Anisotropy of Polycrystals II 

978-3-908451-09-9, 2005, 486 pp, US$273.00/€198.00 

Textures of Materials 

978-0-87849-681-5, 1994, 2168 pp, US$712.00/€516.00 


978-0-87849-903-8, 2002, 1880 pp, US$549.00/€398.00 


978-0-87849-975-5, 2005, 1748 pp, US$549.00/€398.00 

The Mechanical Behavior of Materials X 

978-0-87849-440-8, 2007, 1658 pp, US$549.00/€398.00 

The Meyer-Neldel Rule 

978-3-908450-62-7, 2001, 372 pp, US$243.00/€176.00 

The Reactive Element Effect on High Temperature Oxidation 

978-0-87849-589-4, 1989, 370 pp, US$166.00/€120.00 

The Role of Subsurface Zones in the Wear of Materials 

978-0-87849-580-1, 1989, 238 pp, US$110.00/€80.00 

The Science of Engineering Ceramics II 

978-0-87849-817-8, 1999, 724 pp, US$331.00/€240.00 

The Science of Engineering Ceramics III 

978-0-87849-401-9, 2006, 950 pp, US$411.00/€298.00 

Theoretical and Technological Aspects of Crystal Growth 

978-0-87849-806-2, 1998, 320 pp, US$228.00/€165.00 

Theoretical Aspects of the Localized Corrosion of Metals 

978-0-87849-526-9, 1985, 180 pp, US$77.00/€56.00 

Theory, Modeling and Numerical Simulation 

978-3-908451-56-3, 2008, 180 pp, US$138.00/€100.00 

THERMEC 2006 

978-0-87849-428-6, 2007, 5180 pp, US$753.00/€546.00 

THERMEC 2006 Supplement 

978-0-87849-429-3, 2007, 1080 pp, US$273.00/€198.00 

THERMEC’2003 

978-0-87849-919-9, 2003, 4650 pp, US$753.00/€546.00 

Thin Films and Porous Materials 

978-0-87849-343-2, 2009, 310 pp, US$230.00/€167.00 

Thin Slab Direct Rolling of Microalloyed Steels 

978-0-87849-485-9, 2007, 154 pp, US$72.00/€52.00 

Time Dependent Mechanical Response 

of Engineering Ceramics 

978-0-87849-832-1, 1999, 176 pp, US$121.00/€88.00 

Time-dependent Mechanical Properties of Solids 

978-0-87849-476-7, 2008, 162 pp, US$116.00/€84.00 

Towards Innovation in Superplasticity I 

978-0-87849-748-5, 1997, 428 pp, US$226.00/€164.00 

Towards Innovation in Superplasticity II 

978-0-87849-828-4, 1999, 872 pp, US$381.00/€276.00 

Trends and New Applications of Thin Films 

978-0-87849-815-4, 1998, 576 pp, US$232.00/€168.00 

Trends in Advanced Materials and Processes 

978-0-87849-859-8, 2000, 312 pp, US$160.00/€116.00 

Trends in Ion Implantation 

978-0-87849-644-0, 1992, 208 pp, US$138.00/€100.00 

Ultra Clean Processing of Semiconductor Surfaces IX 

978-3-908451-64-8, 2009, 412 pp, US$246.00/€178.00 

Ultra Clean Processing of Semiconductor Surfaces VIII 

978-3-908451-46-4, 2008, 400 pp, US$246.00/€178.00 

http://www.scientific.net 

For For more full information table of contents please and visit descriptions the site at: of each title visit our web site 

http://www.scientific.net at: http://www.ttp.netor 

contact us at ttp@ttp.net 

Ultra Clean Processing of Silicon Surfaces 

978-3-908450-40-5, 1999, 316 pp, US$246.00/€178.00 

Ultra Clean Processing of Silicon Surfaces 2000 

978-3-908450-57-3, 2001, 340 pp, US$243.00/€176.00 

Ultra Clean Processing of Silicon Surfaces V 

978-3-908450-78-8, 2003, 320 pp, US$232.00/€168.00 

Ultra Clean Processing of Silicon Surfaces VII 

978-3-908451-06-8, 2005, 398 pp, US$273.00/€198.00 

Ultrafast Phenomena in Semiconductors 

978-0-87849-824-6, 1999, 392 pp, US$254.00/€184.00 

Ultrafast Phenomena in Semiconductors 2001 

978-0-87849-890-1, 2002, 356 pp, US$218.00/€158.00 

Ultra-High-Pumpability and High Performance 

Concrete Technology 

978-0-87849-341-8, 2009, 420 pp, US$276.00/€200.00 

Ultra-Precision Machining Technologies 

978-0-87849-326-5, 2009, 740 pp, US$345.00/€250.00 

Vacancies and Interstitials in Metals and Alloys 

978-0-87849-552-8, 1987, 1490 pp, US$552.00/€400.00 

Wood 

978-0-87849-487-3, 2006, 419 pp, US$178.00/€129.00 

X-Ray Diffraction Analysis of Ionic Liquids 

978-0-87849-676-1, 1994, 236 pp, US$160.00/€116.00 

XVII International Materials Research Congress 

978-0-87849-330-2, 2009, 106 pp, US$138.00/€100.00 

Zirconia Engineering Ceramics 

978-0-87849-793-5, 1998, 336 pp, US$232.00/€168.00 

410,000 pages online 

The site www.scientific.net is 

devoted entirely to the fields of 

materials science and 

engineering and could well 

offer a first-call one-stop 

solution for your materials 

science related R&D problems. 

51

Order Form 

Qty ISBN Title Price 

Postage/Handling: USA and Canada add US$12.00 per book/volume, other countries add €12.00 per book 

Order online at: 

http://www.ttp.net 

Express Fax Order: (+41) 44 922 10 33 

or for the U.S.A. and Canada 603 632 5611 

To order mail or fax this form 

to your local bookseller or directly 

to your nearest Trans Tech Publications 

Office. 

North and South America: 

Trans Tech Publications Ltd 

234 May Street, PO Box 699 

Enfield, New Hampshire 03748 

USA 

Tel. (603) 632-7377 

Fax (603) 632-5611 

Email: usa-ttp@ttp.net 

Europe/Africa/Asia/Australia: 

Trans Tech Publications Ltd 

Laubisrutistr. 24 

CH-8712 Stafa-Zurich 

Switzerland 

Fax +41 (44) 922 10 33 

Email: sales@ttp.net 

Agents and Representatives: 

For our complete list of agents and 

representatives please visit our 

website www.ttp.net. 

Name 

Institution 

Department 

Street/P.O. Box 

City/Zip Code 

Country 

Your Ref (if any) 

I enclose � check � bank draft 

� Please send me an invoice 

Please charge my credit card: 

� Visa � Eurocard � American Express 

Card number: Expiry Date: 

Card holder’s name and adress (as given to the card service): 

Date and Signature 

Total

Materials Science & Engineering - Trans Tech Publications Inc.

Create successful ePaper yourself

Delete template?

Save as template?