shurikenonline.com - Metra Electronics

Corporate Headquarters: 

Metra Electronics Corporation 

460 Walker Street 

Holly Hill, FL 32117 

800-221-0932 

shurikenonline.com 

© Copyright 2010 - Metra Electronics Corporation 

SHURBROCH-11

11 

In Store Display 

Display Rack 

SK-RACK 

81” x 31.25” x 12” 

cAll to order: 800-221-0932 shurikenonline.com 

Shuriken Power Cells are engineered for today’s high-performance mobile audio systems. 

Utilizing Shuriken’s Absorbed Glass Mat (AGM) technology, these rechargeable power 

cells can be mounted in any position and will not spill. 

The power cells are extremely resistant to excessive heat and strong vibration. They 

can be discharged and recharged hundreds of times. With super-low ESR and closelypacked 

pure lead plates, each power cell packs a punch. 

Many Shuriken Power Cells are designed to deliver the winning edge at SPL competitions. 

Others provide the consistent backup power needed for powerful car stereo systems, 

especially when parked for parties and shows. 

Shuriken batteries can be found powering anything from race cars and cabin cruisers to 

trolling motors and winches. Shuriken not only provides the constant voltage needed for 

optimum sound quality and other uses, it limits the draw from the starting battery. 

Shuriken’s new SK-BT140 is one of its most powerful batteries ever with 140 amp hours 

and 4000 watts for extreme reserve power – ideal for SPL competitions. 

Packing high output in a small package is the new SK-BT45 battery. Weighing in at 

just 35 pounds with 45 amp hours and 1250 watts, it provides solid reserve power in a 

compact size (7.76” x 6.50” x 6.69”). 

Both batteries are engineered with Shuriken’s AGM technology and can be mounted in 

any position without leaking. 

Also new are a complete line of Shuriken Battery Boxes designed to protect your batteries from 

heat and keep them secure during a rough ride. 

The battery boxes are constructed from heavy-gauge steel and feature a powder-coated 

indestructible finish. The bottom of the boxes have holed flanges for permanent mounting 

and also pre-cut slots for hold-down straps. Part numbers match the corresponding 

battery: for example, the SK-BT140-BX fits the SK-BT140 battery. 

Look to Shuriken for the latest in power cell innovation. Shuriken is a brand of Metra 

Electronics, the global leader in auto sound and other electronic accessories.

TABLE OF CONTENTS 

Batteries ......................................................................................................2-5 

Battery Chargers ........................................................................................... 5 

Battery Cases................................................................................................. 6 

Power Terminal Systems ...........................................................................7-8 

CTEK ..........................................................................................................9-10 

In Store Display ........................................................................................... 11 

Metra Dealer Site ......................................................................................... 12 

The CIGPLUG lets you plug into the cigarette 

lighter of your vehicle to charge your battery 

and the other end into the quick disconnect of 

a CTEK charger. For those owners of Imports, 

there is even an adapter so the CIGPLUG fits 

snugly into the cigarette lighter. 

1 cAll to order: 800-221-0932 shurikenonline.com cAll to order: 800-221-0932 shurikenonline.com 

10 

cigplug 

m6 

This is what comes with all the CTEK 

chargers. With a 6.4mm inner ring diameter 

the M6 is the perfect size to attach to most 

battery terminals. With the quick disconnect 

plug, the M6 can be permanently connected to 

your battery while making the connection to a 

CTEK charger a breeze. 

m8 

With a 8.4mm inner ring diameter the M8 is 

the perfect size to attach to most battery 

terminals. With the quick disconnect plug, 

the M8 can be permanently connected to your 

battery while making the connection 

to a CTEK charger a breeze.

CTEK chargers are designed to slowly charge your battery, to ensure your 

battery gets the deepest, strongest charge possible. But it does more then 

that; it’s designed to be a maintenance charger for owners of vehicles that 

are stored or not used often. From a motorcycle to an RV, CTEK has a 

solution. Plus there are accessories that will make the CTEK chargers 

more convenient and easier to use. 

US800 

• Designed for 12 Volt Batteries 

• Delivers .8 amps of maintining / charging 

current and designed to charge batteries as 

big as 32 aH (Amp Hours) 

• Comes with a quick disconnect plus with M6 

(6.4 mm) ring terminals and spring clamps 

• Can be discharged and re-charged 100’s of 

times 

• Low internal resistance, which provides for 

better mobile electronics performance 

• 4 Step, fully automatic charging 

US3300 


• Delivers .8 of maintining / charging current 

for smaller batteries and 3.3 amps for the 

bigger batteries and designed to charge 

batteries as big as 75 aH (Amp Hours) 


(6.4 mm) ring terminals and spring clamps 

• 4 Step, fully automatic charging 

US7002 


• Delivers 7 amps of maintaining / charging 

current and designed to charge batteries as 

big as 150 aH (Amp Hours) 


(6.4 mm) ring terminal and spring clamps 

• 8 Step, fully automatic charge 

Mount near amps for power reinforcement. 

• Compact size 

• Absorbed glass mat technology 

• Can be mounted in any position 



Size: 7.14” x 6.5” x 3” 

Weight: 13 lbs. 

Amp Hours: 20 

Watts: 600 


2 

SK-BT20 

SK-BT35 

Lightweight for special applications. 

• Small size 



• Low internal resistance which provides 

for better mobile electronics performance 

Size: 7.7” x 6.46” x 5.12” 


Amp Hours: 35 

Watts: 800 

SK-BT45 

Compact size with high output power. 


• Low internal resistance 


• Reserve power in a compact size 

Size: 7.76” x 6.50” x 6.69” 


Amp Hours: 45 

Watts: 1250 

NEW 

BATTERiES

Atteries 

SK-BT60 SK-wn20 

Ideal size for import tuner applications. 

3 Wing Nut sets (positive and negative). One 

set with the short mounting post replaces 


the SAE post on the SK-BTA20. The set with 


the medium mounting post is to be used on 


the SK-BT20 by itself. The set with the long 

power 


mounting post mounts down the SK-BTA20 

times 

adapter to the SK-BT20 battery. 

Size: 9” x 8” x 5.5” 


Amp Hours: 60 

Watts: 1500 

SK-WN35-100 

terminAl 

3 Wing Nut sets (positive and negative). 

One set with the short mounting post replaces 

the SAE post on the SK-BTA35-100. The set 

with the medium mounting post is to be used 

SK-BT80 

on the SK-BT35-SK-BT100 batteries by them- 

Enough power to run any system. 

selves.The set with the long mounting post 

mounts down the SK-BTA35-100 adapter to the 

SK-BT35 - SK-BT100 batteries. 

systems 

• Large size 




times 

Size: 10.25” x 8” x 6.75” 


Amp Hours: 80 

Watts: 1800 

SK-BT100 

For large system where instant power is the 

key. 





times 



Size: 12” x 8.5” x 6.75” 


Amp Hours: 100 

Watts: 2000 

SK-WN120 

3 Wing Nut sets (positive and negative). One 

set with the short mounting post replaces 

the SAE post on the SK-BTA120. The set with 

the medium mounting post is to be used on 

the SK-BT120 by itself. The set with the long 

mounting post mounts down the SK-BTA120 

adapter to the SK-BT120 battery. 

SK-sAe20 

sk-sAe35-100 

sk-sAe120 

2 SAE post sets (Positive and negative). 

One set with the shorter mounting post is 

for the batteries alone. The set with the long 

mounting post is to be used to mount down 

the battery adapter. 


8

power terminAl systems 

Power Terminal Systems are a positive and negative top SAE 

post / side post adapter. SAE post is removable and can be replaced by 

the wing nut set. You can use the bolt the battery comes with to 

attach the adapter or use the optional SAE post or Wing Nut posts. 

SK-BTA20 

Use SK-WN20 Wing Nut Set. 

• Power battery and wing nut set sold 

separately 

SK-BTA120 

Use SK-WN120 Wing Nut Set. 


separately 

SK-BTA35-100 

Use SK-WN35-100 Wing Nut Set. 


separately 

SK-BT120 

One of our most powerful batteries. 





times 



Size: 13” x 8.5” x 6.75” 



Watts: 2400 

sk-bt140 

More lead plates for increased power 

and reserve capacity. 


• Extreme reserve power 

• Ideal design for SPL systems 


Size: 13.5” x 11.02” x 6.73” 

Weight: 90.8 lbs. 


Watts: 4000 

SK-BT8785DT 

The perfect solution for under hood 

battery replacement. 





times 

Size: 9” x 8” x 5.5” 


Amp Hours: 60 

Cranking Amps: 785 

Watts: 1500 


4 

NEW 

bAtteries

Atteries & ChArgers 

SK-BT16V 

16 Volt Power for SPL and Custom System. 

• Medium size 




times 

Size: 10.25” x 8” x 6.75” 


Amp Hours: 80 

Watts: 1800 

PWRSP 

60 Amp power supply 

Input: 105-130 VAC, 1000 Watts 

Output: 13.6 VDC, 60 Amp 

Dimensions: 3.6” x 8” x 9” 

Weight: 5-8 lbs. 

Reverse Battery Protection 

PD9260C 

Fully automatic 12 volt battery 

charger & maintainer & power supply. 

Input: 105-130 VAC, 1000 Watts 

Output: 13.6 VDC 60 Amp 

Reverse Battery Protection 

Built-in Charge Wizard 

High Voltage protection 

* Charge Wizard Automatically Selects Either Boost Mode 

(14.4V) Normal Mode (13.6V) or Storage Mode (13.2V) 

BATTERY BOXES 

Shuriken Battery Boxes are constructed from heavy gauge steel powder coated 

for an indestructible finish. The design has holed flanges at the bottom for 

permanent mounting. The Shuriken Battery Boxes also have pre-cut slots that 

can be used for hold down straps. 

Protect your battery from heat and keep 

it in position with Shuriken Battery Boxes 

AVAILABLE MODELS 

BOX FITS BATTERY 

SK-BT20-BX SK-BT20 








SK-BT8785DT-BX SK-8785DT 

SK-BT16V-BX SK-BT16V 


6 

bAttery boxes

shurikenonline.com - Metra Electronics

Create successful ePaper yourself

Delete template?

Save as template?