CATALOGUE - Immergas

More documents

Recommendations

Info

Blue Series Flue System for Traditional Boilers ADDITIONAL KITS FOR TRADITIONAL BOILERS 42 <strong>Immergas</strong> | Catalogue ʻ09 Description Code 10 gaskets kits Ø 60 (5 bend gaskets and 5 extension gaskets) 3.011143 10 gaskets kits Ø 80 3.011144 10 gaskets kits Ø 100 3.011145 10 gaskets kits Ø 125 3.011146 Wall sealing plate Ø 125 (2 pieces) 3.010958 Wall sealing plate Ø 100 (2 pieces) 3.010959 Wall sealing plate Ø 80 (2 pieces) 3.010996 Wind-stop outlet for EOLO Maior kW/X 3.011488
Blue Series Ø 80 mm ducting system The system consists in a series of components, supplied as individual kits, which can be assembled in 3 different configurations: 1. TWO-TEE ducting system 2. ONE-TEE ducting system 3. ducting system WITH INLET BEND In every configuration the pipes of the ducting system can be positioned, apart from existing chimneys, also in shaft without good develop and with close perimeter. 1. TWO-TEE ducting system With this solution the ducting system pipes are fitted into a TEE connections, in order to connect: The boiler, coupled to the horizontal leg A second tee element, with a respective inspection flap, located at a convenient height below the boiler This system allows easy inspection of the flue and includes a special condensate collector kit to which a drain line can be connected. 2. ONE- TEE ducting system In this configuration, the pipes of the ducting system end at the bottom with a TEE, of which the horizontal leg is connected to the boiler. The vertical bottom leg of the TEE incorporates a condensate collector kit that can be coupled to a drain line with a siphon trap. The flue is inspected from the point at which the duct connects with the boiler. 3. Ducting system WITH INLET BEND This is the quickest ducting solution for lining an existing but unsuitable chimney. The connection between the boiler and the inlet end of ducting system is made with a 90° bend. Using this configuration, the Ø80 condense tank kit will be positioned near the boiler flue outlet (code 3.012009) Code Condense tank kit Ø80 3.012009 Catalogue ʻ09 | <strong>Immergas</strong> 43
Page 1: CATALOGUE Gas boilers and condensin
Page 4 and 5: NEW VICTRIX Zeus Superior kW Heat o
Page 6 and 7: VICTRIX Superior kW Heat output of
Page 8 and 9: VICTRIX 115 Heat output of 115 kW;
Page 10 and 11: VICTRIX 75 Heat outputs of 75 kW; H
Page 12 and 13: VICTRIX Superior kW X Heat output o
Page 14 and 15: NEW HERCULES Condensing Heat output
Page 16 and 17: AVIO/ZEUS kW Heat outputs of 24 and
Page 18 and 19: NIKE/EOLO Mini kW Special Heat outp
Page 20 and 21: NEW NIKE/EOLO Star Open chamber con
Page 22 and 23: NIKE/EOLO Mini kW S Heat outputs of
Page 24 and 25: JULIUS Star Wall-hung open chamber
Page 26 and 27: IMMERSTOR Stainless steel storage t
Page 28 and 29: FLUE SYSTEMS RANGE green series
Page 30 and 31: Green Series Flue systems for VICTR
Page 32 and 33: Green Series Flue System for Conden
Page 34 and 35: Green Series Ø 60 mm ducting syste
Page 36 and 37: Green Series Ø 80 mm flexible duct
Page 39 and 40: FLUE SYSTEMS RANGE blue series
Page 41 and 42: Blue Series Flue System for Traditi
Page 43: Blue Series Flue System for Traditi
Page 47: Blue Series Flue system components
Page 50 and 51: Hydraulic system 48 Immergas | Cata
Page 56 and 57: Climatic regulation 54 Immergas | C
Page 58 and 59: Climatic regulation 56 Immergas | C
Page 60 and 61: Boilers and storage tank units conn
Page 62 and 63: Index of codes Code Description 3.5
Page 64 and 65: Code Description EAN code 3.014439
Page 66: Code Description 3.018865 Boiler EO

CATALOGUE - Immergas

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?