CodeWarrior Development Studio for Power Architecture Netcomm
CodeWarrior Development Studio for Power Architecture Netcomm
CodeWarrior Development Studio for Power Architecture Netcomm
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>CodeWarrior</strong> <strong>Development</strong> <strong>Studio</strong> <strong>for</strong> <strong>Power</strong> <strong>Architecture</strong> <strong>Netcomm</strong> v10.0.1<br />
Note: In order to check whether your P4080 processor is rev1 or rev2, check the content<br />
of the e500mc's special purpose register called SVR, in the <strong>CodeWarrior</strong> register view. If<br />
the SVR register's value masked with 0xfff0fff0 is equal to 0x82000010 the processor's<br />
revision is rev1, otherwise it is rev2. For more details please consult the P4080<br />
Reference Manual.<br />
5. The trace settings are applied to the target using the active debug launch configurations.<br />
Currently the multiple active debug launch configurations associated with different P4080<br />
boards are not supported, please make sure that all active debug launch configurations are<br />
using the same P4080 board, when collecting trace data.<br />
6. U-boot in the FSL BSP (on P4080rev1) disables the aurora lanes used <strong>for</strong> Nexus trace<br />
support with the Gigabit TAP. To collect trace to Gigabit TAP probe you must enable at least<br />
2 lanes <strong>for</strong> Aurora.<br />
7. Sometimes, collecting to the NPC Buffer via the <strong>CodeWarrior</strong> Eclipse environment is not<br />
currently working. Collecting to the NPC buffer via the scripting environment (GetBufferTrace)<br />
is working.<br />
2.3.3 Per<strong>for</strong>mance Analysis Tools<br />
The "Generate a Configuration Access Log" operation, found on the Analyze Tab, requires that<br />
the "Save configuration with each captured data" options be checked on the Options Tab.<br />
The Per<strong>for</strong>mance Analysis Events viewer will be empty when initially opened. Upon completion<br />
of each collection operation it will display the collected counter data.<br />
3 System Requirements<br />
Recommended Configuration<br />
3GHz Intel® Pentium® P4 processor or better. Dual-core processor preferable.<br />
Microsoft® Windows XP<br />
2GB RAM (Step speed on machines with 1GB RAM is significantly slower)<br />
1GB free disk space<br />
Note: 500MB of free space is required on the OS drive, regardless of the free space available<br />
on the destination drive.<br />
4 Who Should Use this Release?<br />
Users developing <strong>for</strong> the P4080<br />
5 Who Should NOT Use this Release?<br />
Users developing <strong>for</strong> <strong>Power</strong>Quicc, 8xxx, 7xxx, 7xx, 6xx or 5xx based processors. These<br />
developers should use the previous (non-Eclipse based) versions of the tools.<br />
Freescale Confidential Proprietary<br />
8
Change language